Hydroponic and Aeroponic Systems

Hydroponic and Aeroponic systems T.A (20)
Hydroponic Vertical garden
Leave us an order or message, we will contact you for clarification!
Atami Wilma 4 - Hydroponic system
The Wilma 4 Pot System is a versatile drip-feed watering system that can be used with several different growing media and is ideal for beginners and experienced growers alike. The Wilma should provide better results than hand watering in traditional pots and for the best results we recommend using clay pebbles. The four-pot system uses a 30 litre tank with four 11 litre pots on top, although it is possible to use Air Pots instead as the three litre versions will fit right in. The Wilma Four-Pot System measures 69cm long x 58cm wide x 43cm high (when used with the standard pots).
Leave us an order or message, we will contact you for clarification!
CuttingBoard
System cuttings ( clones ) - 27 . Very good system to develop robust , durable and adaptable plants with strong root system. CuttingBoard can be used by both professionals and beginners , as well as by researchers , teachers and professors of botany. Suitable for rooting of fruit trees , walnut and almond trees, ornamental shrubs , fruits, vegetables and flowers. Each system - instructions and free kit GHE pH Down Dry Dimensions: 66h30h14cm Capacity: 13 L Number of Bays: 27 ATTENTION! Do not leave for a long time already rooted cuttings, because their roots can be twisted and become difficult to remove and unraveling .
Autopot 47ltr Green Tank
Pre Drilled
Includes: Lid and 6mm Top Hat Grommet
Dimensions: 270 × 370 × 610 cm
PLANT!T AEROS I - hydroponic pot, DWC system
PLANT!T AEROS is an easy-to-use Deep Water Culture (DWC) hydroponic system, also known as a "bubbler". With a minimal amount of substrate and intensive aeration, this pot ensures fast growth and plant strength. Most important technical characteristics:
- System Type: DWC (Deep Water Culture)
- Tank capacity: 15L (effective capacity: 12L)
- Dimensions: 303mm wide, 357mm deep, 353mm high
- Air and water pump included
AutoPot easy2grow 8.5L
The AutoPot easy2grow Extention kit 8.5 Liter includes:
- 2x 8.5L pots
- 2x Marix discs – the Marix discs are placed inside each of the pots to prevent soil/compost from leaving the pots
- 2x PotSocks – the RCD’s are placed in the tray under each pot, gold face up. The RCD’s will prevent roots from leaving the pots and discourage them from heading towards the AQUAvalve.
- 1x single AQUAvalve with the 2Pot Extension Kit is placed in between the pots.
- 1x 1m of pipe
- 1x 6mm Tee for easy connection to the easy2grow Kit or existing systems.
Atami Wilma 10 - Hydroponic system
The Wilma 10 Pot System is a drip feed system suitable for use with any medium whether it’s soil, coco or clay. Is ideal for beginners and experienced growers alike. Drip feed systems should provide better results than traditional hand watering as the plants have continual access to the nutrients they require. The Wilma Ten Pot System measures 118cm long x 58cm wide x 43cm high and features ten 6.5 litre pots over a 60 litre nutrient tank.
T.A. CultiMate® S
The TA CultiMate® S is one of the most innovative and advanced hydroponic plant growing systems that offers an extremely easy and efficient way to grow plants without soil.
- dimensions L/W/H: 30.5 x 30.5 x 37 cm
- effective capacity: 15 l
Atami Wilma 16 - Hydroponic system
Wilma 16
The Wilma 16 hydroponic system is a lightweight, easy-to-use and easy-to-carry hydroponic system. Pots of 6.5, 11 or 18 liters can be placed in any tray 4/8/10/16/20. In this way, the plants have enough space in which to develop optimally. Wilma grow systems are light and easily portable, stable, allowing plants to stand upright even when they are already grown. Wilma growing systems are specially designed for the professional gardener! For 16 pcs. plants 1 sq/m. Suitable for use with mineral wool, expanded clay, coconut or soil!
Dimensions: 115cm length x 115cm width x 20cm height
Tank volume: 150 liters.
Leave us an order or message, we will contact you for clarification!
T.A. CultiMate® L Solar
TA CultiMate® L Solar is one of the most innovative and advanced hydroponic plant growing systems that offers an extremely easy and efficient way to grow plants without soil.
- dimensions L/W/H: 46 x 46 x 43 cm
- effective capacity: 45 l
Autopot Easy to grow system ( 2 x 15L.)
Leave us an order or message, we will contact you for clarification!
AutoPot 1Pot Module 15L
The AutoPot 1Pot modulе is extremely versatile and can be used for a wide range of plant types and sizes. The AutoPot 1Pot modulе is easily extended so many pots can be linked to a single tank.
All AutoPot products require:
- NO POWER
- NO PUMPS
- NO MAINS WATER PRESSURE
- NO TIMERS
Gravity pressure is all that is needed from a tank or water barrel. The systems are undoubtedly some of the simplest to use and can be left unattended for weeks due to the capability of the AQUAvalve to deliver all that is required by the plant. The AutoPot 1Pot modulеs can be connected to build even larger systems. See the advice tab for more information or download the 1pot System guide*.
Leave us an order or message, we will contact you for clarification!
Atami Wilma 20 - Hydroponic system
Wilma hydroponic system 20 is lightweight, comfortable to use and easy to carry hydroponic system for ten plants. Pots of 6,5 , 11 or 18 liters may be placed in each tray 4/8/10/16/20 . Thus plants have sufficient space in which to develop optimally. Wilma growing systems are light and portable , stable , allowing the plants to stand upright even when they are already advanced. Wilma growing systems are specifically designed for the professional gardener ! 20 pc . Plant 1 sq / m Suitable for use with minerlan wool ceramist, coco or soil ! Dimensions: 119 cm length x 117 cm width x 48 cm height 140 liters tank .
T.A CultiMate Solar Hydroponic System
TA CultiMate Solar
Effective, reliable, easy to use and economical. TA CultiMate Solar systems are based on the first "home" hydroponic system constructed in 1975. Plants are rooted in a layer of expanded clay over a tank of nutrient solution that is pumped up through an "air column" and aerated at the same time. Thus, the oxygen-enriched solution constantly floods the roots, ensuring exceptional growth.
Leave us an order or message, we will contact you for clarification!
T.A CultiMate Solar - hydroponic system
TA CultiMate Solar
Effective, reliable, easy to use and economical. TA CultiMate Solar systems are based on the first "home" hydroponic system constructed in 1975. Plants are rooted in a layer of expanded clay over a tank of nutrient solution that is pumped up through an "air column" and aerated at the same time. Thus, the oxygen-enriched solution constantly floods the roots, ensuring exceptional growth.
The set includes:
Air pump ACO-2201 - 220V, 1.8W; pressure >0.012Mpa, 1.3L/min - with 1 year warranty
Large tank, allowing easy stabilization of the working solution; enough room for the roots
The system comes with easy and detailed instructions for assembly and use
With a minimum of maintenance, it provides fast and stable growth, superior flowering and an excellent harvest
Dimensions: 31x31x37cm
Total volume approximately 15L, effective volume 12L
Made of strong, UV-protected plastic
Leave us an order or message, we will contact you for clarification!
Autopot модул с 1 саксия (8.5 литра)
Leave us an order or message, we will contact you for clarification!
AutoPot 1Pot XL
The AutoPot 1Pot XL System is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.
All AutoPot products require:
- NO POWER
- NO PUMPS
- NO MAINS WATER PRESSURE
- NO TIMERS
Gravity pressure is all that is needed from a tank or water barrel. The systems are undoubtedly some of the simplest to use and can be left unattended for weeks due to the capability of the AQUAvalve to deliver all that is required by the plant.
T.A CultiMate AERO - aeroponic system
TA CultiMate AERO
If you want to try aeroponics at a low cost - this is your system. It can be used for the entire development cycle, or only for one of the phases, or for mother plants. Supplied in 2 versions according to the size of the "mesh pots": 2" (5cm) or 3" (7.5cm).
The set includes:
- Water submersible pump HX-8810 - 220V, 20W; flow 1000L/h; water column 1.95m - with 1 year warranty
- Large tank, allowing easy stabilization of the working solution; enough room for the roots
The system comes with easy and detailed instructions for assembly and use
Leave us an order or message, we will contact you for clarification!
AutoPot 4mm barb cross connector
AutoPot 4mm cross connector supplied individually and used to connect four pieces of pipe together, they are useful along with the AutoPot 4mm Tee as they provide the user with the ability to create a layout to suit his or her needs.
T.A CultiMate Aero
Leave us an order or message, we will contact you for clarification!
Autopot easy2Propagate Extension Kit
Autopot easy2Propagate Extension Kit
- Heigth: 28см
- Length: 120см
- Wigth: 55см
AutoPot AQUAbox Straight
The AQUAbox Straight is designed to water and feed plants of all types and sizes that are grown directly in the soil. Positioned directly into the ground the AQUAbox Straight is ideal for watering narrow raised beds. Alternatively, it may be used in a tray to water a conventional grow bag.
AQUAbox Straight is attached to single capillary wick that distributes water under the soil, across an area of up to 4 square feet. With an AQUAvalve at its core, the AQUAbox Straight draws on the water supply (water reservoir) as required by the plants, ensuring an incredibly efficient use of water. The roots of the plants instinctively head towards the water source, attaching themselves to the capillary wicks below the soil level.
Cross connector 13mm to 4 mm
These connectors are perfect for reducing 13mm pipe down to 4mm pipe, when using large systems. They are inserted in-line at the point where an AQUAvalve or aquaPot is positioned. They provide a water tight connection unlike many other types of reduction fittings.
T.A EBB & GROW
Terra Aquatica's EBB & GROW system is based on the proven EBB & FLOW design.
A water pump floods the tray on which the pots are placed to deliver the nutrient solution.
In this way, spent air is taken away from the roots of your plants, and as the water drains back to the tank, fresh air enters the roots.
- 95cmx95cm
- Height: 38cm
- Weight: 16.5Kg
- Material: 100% recycled polyethylene
- Made in France
- Tank : up to 100 liters
- Tray 95x95cm
- Level meter
- Water pump SICCE - 600L/H – 6.5W – 240 Volts – 50/60Hz
- Fertilizers - TA Flora GRO 0.5l; TA Flora Bloom 0.5l; TA Flora Micro Soft Water 0.5l; GHE Flora Micro HW 0.5l
- Fittings
- Input and output filter
13mm Double Barb Tee Connector
AutoPot 13mm Double Barb Tee connectors are simply used to connect three pieces of 13mm pipe (hosepipe) together.
Aeroponic system GHE RainForest 2 with 36 slots 12V
The GHE RainForest 2 is an aeroponics system suitable for growing cuttings and seedlings. With it you can simultaneously grow 36 plants . The compact size of the GHE RainForest 2 allows it to be installed in a tent.
The set includes:
- Tank - 65 L
- Pump for fine dispersion of the Vortex ® nutrient solution
- Cover with 6 pcs. basket holders (with 6 slots each)
- Baskets for hydroponics - 36 pcs. with a diameter of 5 cm
- Keramzite
Dimensions: 46 x 43 cm
Voltage: 12 V
Leave us an order or message, we will contact you for clarification!
Autopot AQUAbox Spyder
Тhe AQUAbox Spyder offers a revolutionary self-watering solution for Grow Your Own enthusiasts. No mains water supply, pumps or timers are required. Simply connect to an existing water barrel to automatically water a 1.2sq/m area.
Positioned directly in the ground the AQUAbox Spyder is ideal for watering conventional beds or the increasingly popular raised beds. A series of capillary wicks fan out from the AQUAbox Spyder distributing water under the soil, across an area of up to 1.2sq/m.
With the AQUAvalve at its core, the AQUAbox Spyder draws on the water supply (water barrel or tank) as required by the plants, ensuring a fantastically efficient use of water. The roots of the plants instinctively head towards the water source, attaching themselves to the capillary wicks below the soil level. The capillary wicks should be changed every growing season.
AutoPot AQUAvalve
The AQUAvalve is supplied with all AutoPot Watering Systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plants, by simple gravity pressure from a tank or water butt, no pumps, mains water pressure, electricity or timers are required. Once connected to a tank the AQUAvalve will open and allow water to fill the tray to a preset level of 20mm. The AQUAvalve will not refill the tray until all the water has been used.
The AQUAvalve is at the heart of all our watering systems and ensures our systems offer low maintenance, are easily extendable, there is no more hand watering and can water and feed crops whether ornamental or edible all year round. Due to the capacity of the AQUAvalve AutoPot are now market leaders in irrigation whether for domestic gardening, commercial horticulture or hydroponics. The AQUAvalve is a simple but very effective watering device promoting phenomenal growth and maximum yields.
RainForest 72
System cuttings (clones) The most effective hydroponic system GHE, designed for maximum flow of oxygen in the roots. Used in the largest laboratories in the U.S., Argonne National Laboratory and Los Alamos National Laboratory, this system has shown the best results in the pace of development in comparison with any other system tested so far. -Dimensions: 67h67h31cm -Capacity: 60 L -Number of slots: 72 Each system comprises a set of the series Flora.
Leave us an order or message, we will contact you for clarification!
Autopot Cross Connector 13mm to 4mm
These connectors are perfect for reducing 13mm pipe down to 6mm pipe, when using large systems. They are inserted in-line at the point where an AQUAvalve or aquaPot is positioned. They provide a water tight connection unlike many other types of reduction fittings. They work in exactly the same way as the AutoPot Cross Connector 13mm to 4mm but this fitting has one connection for 4mm pipe whereas the cross connector provides two connections for 4mm pipe.
AutoPot AQUAvalve Cover
A key component in the easy2GO kit. The AQUAvalve cover, when used in conjunction with the AQUAvalve allows the grower to create their own basic, but very effective, hobby system.
GrowStream 10
Growstream 10
Ten-slot aeroponic system. Known for its large yields, GrowStream is already on the market in Bulgaria. GrowStream perfectly aerates the nutrient solution, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resistant and optimizes their productivity. To each system - instructions and a free set of TA Flora Gro+Bloom+Micro x 1L
- Dimensions: 110/46/55 cm
- Effective capacity: 50 l
Leave us an order or message, we will contact you for clarification!
AutoPot 4mm In-line tap
AutoPot 4mm In-Line Taps are a very useful accessory. They can be inserted in-line just after the connection to the 30 or 47 ltr tanks. Allowing you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.
Please note that this product is sold individually.
GrowStream 14
GrowStream 14
Fourteen-slot aeroponic system. Known for its large yields, GrowStream is already on the market in Bulgaria. GrowStream perfectly aerates the nutrient solution, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resistant and optimizes their productivity. To each system - instructions and a free set of TA Flora Gro+Bloom+Micro x 1L
- Dimensions: 160/46/55 cm (0.7 m 2 )
- Effective capacity: 55 l
Autopot 13mm In-line tap
AutoPot 13mm In-line taps are a very useful accessory. They can be added to the end of a layout when you are using hosepipe (13mm pipe). You can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.
T.A Growstream 20
GrowStream 20
Aeroponic system with twenty nests. Known for its large yields, Growstream is already on the market in Bulgaria. GrowStream perfectly aerates the nutrient solution, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resistant and optimizes their productivity. To each system - instructions and a free set of TA Flora Gro+Bloom+Micro x 1L
- Dimensions: 130/67/44 cm
- Effective capacity: 90 l
Autopot 13mm End Plug
AutoPot 13mm End plug are used to cap the end of a supply line when using 13mm pipe (hosepipe).
GrowStream 28
GrowStream 28
Aeroponic system with twenty-eight nests. Known for its large yields, GrowStream is already on the market in Bulgaria. GrowStream perfectly aerates the nutrient solution, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resistant and optimizes their productivity. To each system - instructions and a free set of TA Flora Gro+Bloom+Micro x 1L
- Dimensions: 180/67/44 cm (1 m 2 )
- Effective capacity: 100 l
Leave us an order or message, we will contact you for clarification!
Autopot AirDome pack
Autopot Blue Bublle Pipe for AirDome 52mm
This blue tube is key to ensuring effective air diffusion into the root zone of plants, which stimulates growth.
T.A - GrowStream 40
TA - GrowStream 40 is the most productive , most efficient and most adaptable hydroponic system on the market!
- for 40 plants
- dimensions L/W/H: 210 x 103 x 59 cm.
- tank volume: 200 l.
GrowStream 60
GrowStream 60
Sixty-slot aeroponic system. Known for its large yields, GrowStream is already on the market in Bulgaria. GrowStream perfectly aerates the nutrient solution, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resistant and optimizes their productivity. To each system - instructions and a free set of TA Flora Gro+Bloom+Micro x 1L
- Dimensions: 325/100/56 cm (3 m 2 )
- Effective capacity: 240 l
Leave us an order or message, we will contact you for clarification!
Accessory pack for easy2grow kit
GrowStream 84 B
GrowStream 84 B
Eighty-four-slot aeroponic system. Known for its large yields, GrowStream is already on the market in Bulgaria. GrowStream perfectly aerates the nutrient solution, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resistant and optimizes their productivity. To each system - instructions and a free set of TA Flora Gro+Bloom+Micro x 1L
- Dimensions: 290/195/32 cm (5 m 2 )
- Effective capacity: 220l (2x110l)
Accessory pack for easy2grow kit (Black)
Dutch Pot Aero 1m2
Aero - hydroponic system Extremely easy to assemble and use aero - hydroponic system for 12-60 plants. A good mix between large pot and AeroFlo. Also can easily be traformira in Dutch Pot Hydro 1m2prez winter, when temperatures are lower . Long markucheta supplying each pot with a solution allowing to change the locations of Sakas at any time. Protected against leaks ! Each system - free kit GHE Flora Gro + Bloom + Micro x 1L - size 120 x 100 x 67 cm - tank size 60L made from strong UV - protected plastics provides fast and stable growth, excellent flowering and excellent harvest
Leave us an order or message, we will contact you for clarification!
GHE BioFilter for Hydropponic Systems
An effective solution for a pathogen-free solution. An essential tool for the successful gardener, useful for both hydroponics and soil.
T.A RAINFOREST 6 INSERT 3INCH POT
The T.A RAINFOREST 6 INSERT 3INCH POT is an innovative hydroponic growing system that allows you to create an ideal environment for your plants to grow healthy and fast. This high-quality product from T.A is designed to facilitate the process of growing plants without soil and ensure optimal delivery of nutrients and oxygen to the root system.
Капилярна лента за Autopot AQUAbox Straight
It acts as a bridge between the water reservoir and the soil, allowing water to transfer gradually and evenly to maintain optimal root moisture.
Leave us an order or message, we will contact you for clarification!
Leave us an order or message, we will contact you for clarification!
Autopot 6mm Top Hat Grommet
- These grommets can be used to replace old, worn top hat grommets in your hydroponic system and can be a valuable solution when building your own garden system
- Top Hat grommets have a straight side wall for easy installation
- 6mm opening
AutoPot Tray2Grow - irrigation system
Leave us an order or message, we will contact you for clarification!
PotSock - Square for 8.5 and 15L pot.
PotSocks have been designed to keep even the most agile root system where it belongs… contained in the pot!
Enjoy complete peace of mind that your AQUAvalve is safe and free from rogue roots.
Autopot 13mm In-line Filter
Used to prevent blockages in autopots and drippers, a filter is a must on any irrigation system.
Autopot 15L Pot Black
- A replacement 15ltr square pot to fit AutoPot easy2grow and 1Pot modules and systems.
- We recommend fitting PotSock Square to the base of 15ltr Pots for superior root control.
Autopot 1Pot Tray and Lid Black
- A replacement 1Pot Tray and Lid as supplied with AutoPot 1Pot modules and systems. The 1Pot Tray and Lid accepts an 8.5ltr or 15ltr Square Pot (pots not included).
- The tray requires an AQUAvalve and fittings (not included) to function as part of an AutoPot Watering System.
- We recommend using PotSock Squares (not included) on the bases of your pots to prevent your plant’s roots from impairing the performance of the AQUAvalve.
Marix Disc (SQUARE) Black 186x186 mm.
Marix Discs are designed to fit the 1Pot system, the easy2grow Kit & the 2Pot extension trays to extend the easy2grow Kit.
The purpose of the Marix Disc is to prevent compost or soil from leaving the pot, keeping the system clean & the AQUAvalve free from debris.
Root control disc (square) 196x196mm
The Root Control Discs or RCD™s are designed to fit the 1Pot system, the easy2grow Kit & the 2Pot extension trays to extend the easy2grow Kit.
These discs are black & gold in colour and are placed in the tray underneath the pot, gold face up.
The purpose of the Root Control Disc is to prevent roots from leaving the pot & heading towards the AQUAvalve.