Lighting

• Input Voltage: 240 Volt
• Input Current at 100%: 4.4 Amps
• Input Current at 110%: 6.1 Amps
• Input Power at 100%: 1050 Watt
• Input Power at 110%: 1200 Watt
• Lamp: Gavita Pro Plus 1000 W 400V EL DE HPS K12 x 30S

• Input Voltage: 230 - 240 Volt
• Input Current at 100%: 4.5 - 4.7 Amps
• Input Current at 115%: 5.8 Amps
• Input Power at 100%: 1055 Watt
• Input Power at 115%: 1200 Watt
• Lamp: Gavita Pro Plus 1000 W EL DE HPS E40

reflector rail

Moves the lighting back and forth along a 220cm long rail. In this way, it can be placed closer to the plants, since it does not stay in one place for long.
Increases lamp efficiency and life.



SAVE ELECTRICITY and increase efficiency
Travel speed - 3-3.30 minutes in one direction
Movement pause from 2 to 120 seconds.
Adjust the movement speed
Possibility to limit the lifting by means of clamps.
Holds up to 10 kg
Drive motor power: 12W

LUMATEK 600W 240V CONTROLLABLE BALLAST is a digital ballast that can work with both sodium (HPS) and metal halide (MH) lamps. It provides a stable and precise voltage to the lamp, creating a higher PAR/PPF emission and yet is much more energy efficient than most ballasts on the market! The ballast features "smart start" technology and a soft dimming mechanism! External control is possible with LUMATEK Control Panel Plus 2.0 (sold separately).

• output power: 600W
• dimmable / 4 working modes: 250W - 400W - 600W - 660W
• generates very little heat compared to other ballasts on the market
• silent work
• Protections: full circuit protection - open / short; over temperature; over / low voltage; end of lamp life / rectification
• 5 years warranty!

PHILIPS GreenPower CDM-TP 315W/930 is a ceramic discharge metal-halide (CDM) lamp or ceramic metal-halide (CMH) lamp of the latest generation. The bulb emits longlasting warm white light with a color temperature of 3000K which makes it perfect for use in the vegetative stage of plants, grown indoors and outdoors

• for vegetation
• power: 315W
• consumption: 347kWh/1000h 
• color temperature: 3000K
• luminous flux: 36 200lm
• luminous efficacy: 115 lm/W
• socket: PGZ18
• to start: connect to a special adapter* and ballast* (sold separately)

Agrolite Magnetic Ballast CL2 CMH 315W is a lighting set designed to work with CMH / CDM lamps of the latest generation (ceramic metal-halogen / metal-halogen lamps with ceramic discharge).

• the set consists of: magnetic ballast, ignitor and capacitor
• cable to the mains: 1.5m
• cable to the lamp with C13 plug: 0.2m
• for CMH / CDM lamps
• power: 315W
• current consumption: 3.64A
• voltage: 220/230V
• dimensions L/W/H: 298x128x115mm
• weight: 6.2kg

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps.

High-quality Miro9 material, with a reflection of 97% reflectivity.

Special plastic flanges to avoid accidents and reduce heat.

Mounting kit included.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps.

High-quality Miro9 material, with a reflection of 97% reflectivity.

Special plastic flanges to avoid accidents and reduce heat.

Mounting kit included.

Cooltube is a reflector with a cooling glass tube designed to provide even lighting to plants without the excess heat. It reduces the heat output of the lamp placed in it by up to 40% . The removal of heat takes place through a suitable air duct, which is installed on the pipe.

• Length: 49 cm
• Pipe diameter: Ф120 mm
• Suitable for 400w or 600w MH or HPS lamps
• Attached aluminum reflector provides 92% diffused light
• Includes E40 socket
• Materials: glass and aluminum

• Input Connection: Wieland RST IP 65
• Reflector Material: Gavita HortiStar HR 96 600 Vega aluminum reflector
• Lamp holder: E39

• 600W lamp/bulb modes: 250W, 400W, 600W
• 400W lamp/bulb modes: 250W, 400W, don't dim over 400W!
• 250W lamp/bulb modes: 250W, don't dim over 250W!
• Power Lead: 2m
• Voltage: 240V
• Running Amps: 2.9A
• ​Dimensions L/W/H: 43/38/18.5cm
• Weight: 3.215kg

MH bulb / lamp for the growing / vegetation phase.

• Socket: E40
• Luminous flux: 19 100Lm
• Energy conversion efficiency: 77Lm/W
• Average life: 16 000h
• Colour temperature: 5500 K

Compact fluorescent lamp ( CFL ) for flowering with built-in digital lighter ( you can connect it directly into the electricity mains with E40 socket). It does not emit high temperature - you can place it as close as possible to the plants.

• Socket: E40
• Luminous flux: 6300 Lm
• Energy conversion efficiency: 48 Lm/W
• Average life: 10 000 h
• Colour temperature: 2700 K
• Appropriate for additional illumination, side illumination, mother-plants and cuttings
• Minimal heat emission

MH bulb / lamp for the growing / vegetation phase.

• Socket: E40
• Covering area: 2.25 m²
• Luminous flux: 100 000 Lm
• Energy conversion efficiency: 100 Lm/W
• Average life: 10 000 h
• Colour temperature: 4000 K

• Socket: E40
• Luminous flux: 12 950 Lm
• Energy conversion efficiency: 43 Lm/W
• Average life: 10 000 h
• Colour temperature: 2700 K
• Appropriate for additional illumination, side illumination, mother-plants and cuttings
• Minimal heat emission

Osram Vialox NAV-T 1000W is a HPS bulb / lamp for the flowering phase of plants.

• for flowering
• power: 1000W
• current: 10.6A
• luminous flux: 130 000 lm
• efficiency: 130 lm/W
• color temperature: 2000 K
• life: 8 000 h 
• socket: E40

LUMii SOLAR 315W CMH FIXTURE is a lightning set, consisting of:

• Ballast + reflector

Mari 600W is a high quality and long lasting product - one of the best and most selling on the market in its class. The lighting set is designed to work with HPS (sodium) and MH (metal halide) lamps.

• the set consist of: magnetic ballast, ignitor and capacitor
• for HPS and MH lamps
• power: 600W
• current consumption: 6.2A
• voltage: 230V, 50Hz
• dimensions L/W/H: 295x110x115mm
• weight: 6.4kg

Cooltube is a cooling glass tube designed to provide even lighting to plants without the excess heat. It reduces the heat output of the lamp placed in it by up to 40%. The removal of heat takes place through a suitable air duct, which is installed on the pipe.

• Length: 49 cm
• Pipe diameter: Ф125 mm
• Suitable for 400w or 600w MH or HPS lamps
• WITHOUT reflector
• Includes E40 socket
• Materials: glass and aluminum

Cooltube is a cooling glass tube designed to provide even lighting to plants without the excess heat. It reduces the heat output of the lamp placed in it by up to 40%. The removal of heat takes place through a suitable air duct, which is installed on the pipe.

• Length: 49 cm
• Pipe diameter: Ф150 mm
• Suitable for 400w or 600w MH or HPS lamps
• WITHOUT reflector
• Includes E40 socket
• Materials: glass and aluminum

Reflector for CoolTube type Stucco.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps. It combines the cooling capability of the CoolTube with a large reflective surface. Use Ф125mm air ducts if you need to connect more reflectors in series

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps. It combines the cooling capability of the CoolTube with a large reflective surface. Use Ф150mm air ducts if you need to connect more reflectors in series

protects the plants from the heat of the lamp

It is mounted under the lamp and allows it to get as close as possible to the tops of the plants, without the risk of burning. Light is reflected to the reflector for more even illumination. For lamps with a power of 1000W.


eliminates "hot spots"
white coating for diffuse light distribution
protects plants from burning
saves energy and increases efficiency

The Defender Reflector is an industrial strength model. The surface of the reflector is a ‘titanium white’ heat resistant powder coat that produces a very diffuse and even spread light foot print. It maintains a reflective quality of 92%. The base metal is H18 aluminium alloy (3% magnesium) which is strong, yet springy, giving the reflector consistently perfect parabolic curves with even the roughest of handling – perfect for the grower with an ever changing grow room environment.

• ​Area covered: 2.36m²
• Overall dimension at Widest Setting 70cm x 55cm 
• Perfect for a 400W / 600W HPS / MH lamp

The Avenger is the premium, top of the range Adjust-A-Wings Reflector. The super reflective surface is vapour coated with molten glass, titanium dioxide and is PVD / ceramic coated creating an enormous 95-97% reflectivity. This is the most reflective and most durable reflective surface on the market and it will maintain full refection for up to 20 years.

• Area covered: 3.89m²
• Overall dimension at Widest Setting 100cm x 70cm 
• Perfect for а 1000W / two 400W / two 600W HPS / MH lamps

Garden Highpro PEARLPRO is an open reflector that has up to 10% better light distribution than a standard Stucco reflector.

• made of high quality "pearl" aluminum
• secure wire connection box
• dimensions L/W/H: 47 x 47 x 11cm
• socket: E40 (included)
• Suitable for: 250W, 400W, 600W MH / HPS bulbs

• Socket: E40
• Luminous flux: 12 950 Lm
• Energy conversion efficiency: 43 Lm/W
• Average life: 10 000 h
• Colour temperature: 6400 K
• Appropriate for additional illumination, side illumination, mother-plants and cuttings
• Minimal heat emission

Compact fluorescent lamp ( CFL ) for vegetation with built-in digital lighter ( you can connect it directly into the electricity mains with E40 socket). It does not emit high temperature - you can place it as close as possible to the plants.

• Socket: E40
• Luminous flux: 8050 Lm
• Energy conversion efficiency: 40 Lm/W
• Average life: 10 000 h
• Colour temperature: 6400 K
• Appropriate for additional illumination, side illumination, mother-plants and cuttings
• Minimal heat emission

HortiLight SHP 600W dual is a full-spectrum HPS bulb / lamp suitable for both growth / vegetation and flowering phase.

• for growing and flowering
• power: 600W
• luminous flux: 80 000 lm
• efficiency: 133 lm/W
• colour temperature: 2100K
• socket: E40

Osram Vialox NAV-T (SON-T) 600W is a HPS bulb / lamp for the flowering phase of plants.

• for flowering
• power: 600W
• current: 6.06A
• luminous flux: 90 000 lm
• efficiency: 150 lm/W
• color temperature: 2000 K
• life: 20 000 h 
• socket: E40

Lumatek MH Lamp 250W 240V is a pulse*, metal halide bulb for the growth / vegetation phase. It is made of durable quartz, which allows the lamp to operate at higher internal temperatures, increasing power and efficiency. Pulse start technology allows faster start-up and restart times, longer lamp life and increased support at PAR / PPF level.

• for growth
• power: 250W
• amperage: 3.0A
• life: 10 000h
• luminous flux: 21 000 lm
• color temperature: 4200K
• efficiency: 84 lm/W
• PPF: 323μmol/s
• power supply: 240V, 50Hz

MH bulb / lamp for the growing / vegetation phase.

• Socket: E40
• Covering area: 0.4 m²
• Luminous flux: 23 000 Lm
• Energy conversion efficiency: 92 Lm/W
• Average life: 10 000 h
• Colour temperature: 4000 K

MH bulb / lamp for the growing / vegetation phase.

• Socket: E40
• Covering area: 1.44 m²
• Luminous flux: 51 000 Lm
• Energy conversion efficiency: 85 Lm/W
• Average life: 10 000 h
• Colour temperature: 4000 K

Maxibright Warpdrive 600W Power Pack is a budget electronic ballast designed to work with high pressure sodium (HPS) and metal-halide (MH) lamps / bulbs. It is not dimmable!

• silent running
• compact and lightweight
• runs HPS and MH lamps

Note: the product is equipped with a UK plug* and IEC-14 female plug*!

Electrostart 1000W is a lighting set designed to work with HPS (high pressure sodium) and MH (metal-halide) lamps.

• the set consists of: magnetic ballast, ignitor and capacitor
• for HPS and MH lamps
• power: 1000W
• current consumption: 10.3A
• voltage: 230V, 50Hz
• dimensions L/W/H: 25 x 17 x 9cm
• weight: 12.0kg

HortiLight Ballast 600W is an excellent addition to any grow room for those looking for high quality and reliable magnetic ballast at a reasonable price. It is designed to work with HPS (high pressure sodium) and MH (metal-halide) lamps.

• for HPS and MH lamps
• power: 600W
• current consumption: 3A
• voltage: 220 / 240V, 50Hz
• dimensions L/W/H: 310x144x120mm
• weight: 6.4kg

Electro-Magnetic hybrid control for 600W sodium (HPS) or metal-halide (MH) lamps/bulbs. It consists of a throttle, a starter ("lighter"), a capacitor and a control circuit.

• power: 600W
• power consumption: 660W
• 230V, 50Hz
• λ> 0.9; starting voltage 3.2KV
• protection class IP 20
• Dimensions L/W/H: 290x100x80mm
• weight: 6.4kg
• Warranty: 1 year

The LUMii AeroTube 125mm is the latest inline air-cooled reflector. This innovative product, when used in conjunction with ducting and fans, allows air to flow through the reflector, thus helping to control the environment temperature.

• Temperature control
• Toughened glass
• Removable lamp holder for easy lamp access and cleaning
• External 2-part reflector for superior light output and spread
• Mount multiple shades in series (recommended maximum of 2 per fan)
• 4m IEC cable included
• Recommended Wattage: up to 400W
• ∅ 125mm

The LUMii AeroTube 150mm is the latest inline air-cooled reflector. This innovative product, when used in conjunction with ducting and fans, allows air to flow through the reflector, thus helping to control the environment temperature.

• Temperature control
• Toughened glass
• Removable lamp holder for easy lamp access and cleaning
• External 2-part reflector for superior light output and spread
• Mount multiple shades in series (recommended maximum of 2 per fan)
• 4m IEC cable included
• Recommended Wattage: up to 600W
• ∅ 150mm

The LUMii AeroTube 200mm is the latest inline air-cooled reflector. This innovative product, when used in conjunction with ducting and fans, allows air to flow through the reflector, thus helping to control the environment temperature.

• Temperature control
• Toughened glass
• Removable lamp holder for easy lamp access and cleaning
• External 2-part reflector for superior light output and spread
• Mount multiple shades in series (recommended maximum of 2 per fan)
• 4m IEC cable included
• Recommended Wattage: up to 1000W
• ∅ 200mm

The Prima Klima AZERWING reflector with E40 lampholder for HPS & MH lamps provides homogenous light distribution with no hotspots. Reflector sheet is made from Anodized aluminium with 86% reflection after patterning process.

• Length: 550mm 
• Width: ~500-710mm 
• Height: ~150-200mm 
• Max Power: 1000W 
• Weight: 0.90kg (1.76Kg Gross Weight) 

Garden Highpro PEARLPRO XL is an adjustable* open reflector made of high quality "pearl" aluminum.

• no "hot spots"
• homogeneously distributed light
• greater light distribution and instensity
• large covering area
• secure wire connection box
• dimensions in the widest adjustment L/W: 55 x 63cm
• socket: E40 (included)
• suitable for: 250W, 400W, 600W MH / HPS bulbs

Introducing the smartest, most powerful and most efficient LED lighting on the market! DIMLUX XTREME SERIES LED 1000W+NIR.

Dimlux Xtreme Series LED 1000W + NIR produces ultra-high PPFD levels of 3059μmol/s , evenly distributed over an area of 1.7 x 1.7m . It emits a full growing spectrum , consistently producing high-yielding , high-quality crops. Dimlux Xtreme Series LED 1000W + NIR can be dimmed without loss of efficiency, the spectrum and power can be programmed depending on the time of day and the growth stage of the cultivated crop.

• power: 1065W at 230-240V
• total light emission (PPF 350-800nm): 3059μmol/s
• total photon efficiency (PPF 350-800nm): 2.9μmol/J
• roof area: 1.7 x 1.7m
• optics: patented lens with deep penetration and ultra high transmittance
• additional light: patented multi-color light tube 65k
• built-in Doppler proximity sensor
• control: built-in (through the display) or with Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink

Introducing the smartest, most powerful and most efficient LED lighting on the market! DIMLUX XTREME SERIES LED 500W+NIR.

Dimlux Xtreme Series LED 500W + NIR produces ultra-high PPFD levels of 1550μmol/s , evenly distributed over an area of 1.2 x 1.2m . It emits a full growing spectrum , consistently producing high-yielding , high-quality crops. Dimlux Xtreme Series LED 500W + NIR can be dimmed without loss of efficiency, the spectrum and power can be programmed depending on the time of day and the growth stage of the cultivated crop.

• power: 540W at 230-240V
• total light emission (PPF 350-800nm): 1550μmol/s
• total photon efficiency (PPF 350-800nm): 2.9μmol/J
• roof area: 1.2 x 1.2m
• optics: patented lens with deep penetration and ultra high transmittance
• additional light: patented multi-color light tube 65k
• built-in Doppler proximity sensor
• control: built-in (through the display) or with Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink

• Spectrum: Full Spectrum F
• Very High Efficacy: up to 2.9µmol/J
• PPF: 2925 µmol/s
• Input Power: 1025W (±5%)
• Footprint: 2.0 x 1.5m
• Lifetime: + 60 000 hours
• Light Distribution: 120°
• Light Source: Higher Spec Osram and Lumileds Diodes
• Thermal Management: Passive Cooling
• Dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V Light Dimmer (Included)
• Waterproof: IP65
• Input Voltage: 220-240V, 50-60Hz
• Dimensions: 1700 x 1099.6 x 48.2mm
• Weight: 17.5 Kg
• Warranty: 5 years

• balanced full spectrum light
• very high efficaciencyc: 2.9 µmol/J
• high PPF: 2925 µmol/s
• power consumption: 1025W (± 5%)
• footprint with supplemented CO₂: 1.5 x 1.5m
• footprint without supplemented CO₂: 1.8 x 1.8m (should be installed at higher heights)
• Lifetime: 60 000 hours
• Light source: Higher Spec Osram and Lumiled diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V light dimmer (included)
• Dimensions: 1181.2 x 1091 x 105.7mm
• Weight: 18kg
• Warranty: 5 years

Lumatek LED Zeus 600W 2.6 is a complete set of LED lighting, which with its PPF of 1570µmol/s and efficacy of 2.6µmol/J is probably one of the best products currently available on the market. By producing a balanced full spectrum of light it is ideal and sufficient for use during all phases of plant development - from germination, seedlings, cloning or vegetation, until the end of the flowering period of indoor crops.

Why Lumatek LED:

1. Save up to 40% of electricity due to the less heat generated in the room and the need for cooling!
2. Gardeners growing with LED lighting have noticed an improvement in the quality of the crop, as well as a higher yield in the end.
3. 60 000 hours use and 5 years warranty.

• Balanced full spectrum light
• High efficacy: 2.6µmol/J
• High PPF: 1570µmol/s
• Power consumption: 600W
• Footprint: 1.5 x 1.5m
• Lifetime: 60 000 hours
• Light source: Lumileds and Osram diodes
• Fully dimmable
• Dimensions: 1091 x 1182.4 x 81.2mm
• Weight: 13.5kg

Lumatek LED Zeus Compact 465W is a complete set of LED lighting, which with its PPF of 1070µmol/s and efficacy of 2.3 µmol/J is probably one of the best products currently available on the market. By producing a balanced full spectrum of light it is ideal and sufficient for use during all phases of plant development - from germination, seedlings, cloning or vegetation, until the end of the flowering period of indoor crops.

Why Lumatek LED:

1. Save up to 40% of electricity due to the less heat generated in the room and the need for cooling!
2. Gardeners growing with LED lighting have noticed an improvement in the quality of the crop, as well as a higher yield in the end.
3. 60 000 hours use and 5 years warranty.

• Balanced full spectrum light
• High efficacy: 2.3µmol/J
• High PPF: 1070µmol/s
• Power consumption: 465W
• Footprint: 1.2 x 1.2m
• Lifetime: 60 000 hours
• Light source: Osram and Lumileds Philips diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100%
• Dimensions: 998x900x51.9mm
• Weight: 11kg

CMH Adapter to E40 is an adapter which connects a CDM / CMH lamp with PGZ18 socket to an E40 socket.

DLM-4 Zone Controller is specially designed for controlling all DLI* fixtures.

• can control up to 1020 fixtures
• up to 4 separate temperature sensors
• controls 255 fixtures and 1 sensor per zone (up to 4 zones)
• compatible with all DLI fixtures*
• easy to install

Compact fluorescent lamp ( CFL ) for flowering with built-in digital lighter ( you can connect it directly into the electricity mains with E40 socket). It does not emit high temperature - you can place it as close as possible to the plants.

• Socket: E40
• Luminous flux: 8050 Lm
• Energy conversion efficiency: 40 Lm/W
• Average life: 10 000 h
• Colour temperature: 2700 K
• Appropriate for additional illumination, side illumination, mother-plants and cuttings
• Minimal heat emission

Lumatek HPS Lamp 250W 240V is a pulse* high pressure sodium bulb / lamp suitable for both growth / vegetation and flowering phase. It is made of durable PCA ceramic, which allows the lamp to operate at higher internal temperatures, increasing power and efficiency. Pulse start technology allows faster start-up and restart times, longer lamp life and increased lumen maintenance.

• for growth and flowering
• power: 250W
• amperage: 3.0A
• luminous flux: 33 000 lm
• efficiency: 132 lm/W
• PPF: 400μmol/s
• color temperature: 2000K
• life: 28 000h
• socket: E40