Wave Maker 3000 by Neptune Hydroponics is a water agitator for mixing tanks of nutrients that promotes oxygenation and prevents water degradation. Thanks to the movement and recirculation generated, it allows the continuous suspension of nutrients and prevents them from decanting.

• Power: 6W
• Output: 3000L/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5kg

This Big Microscope 60x-100x, besides for identifying tiny insects, can be used for any other purposes by amateurs, collectors, electrical engineers or students. The microscope has:

• 60x, 80x or 100x magnification options
• focus adjustment
• illumination
• converting stand
• does not include batteries

RP 9500 L/h - Submersible Water Pump for clean water is ideal for irrigation tanks for watering, as well as for pond systems and capillary irrigation systems. The pump is not suitable for coarse sewage contamination. Coarse particles clog the pump and reduce its service life. Thanks to its universal connection, it can accommodate a 3/4 ", 1" hose or a connector with an internal thread of 1 "or 1.25"

• flow rate: 9500 l/h
• max. water column: 9m.
• power: 550W
• power cable: 5m.
• connecting connector: included
• for hoses with internal thread: ⌀ 3/4 " , ⌀ 1" , ⌀ 1.25" ( ⌀19mm , ⌀25mm , ⌀32mm )

Sicce VOYAGER 4 6000L/h is a submersible stream pump which by simulating a wave motion increases water circulation in the feed tank and prevents precipitation of dissolved nutrients. Thanks to the reliable magnetic support, the pump can be placed in any part of the tank. The possibility to rotate the support in 360°, practically allows you to direct it in any direction you want.

• flow: 6000L/h
• power: 14W
• suitable for tanks with volume: 400-730L
• silent
• self cleaning impeller
• strong magnet mount
• wide and gentle flow
• 3 years warranty

Sicce VOYAGER HP7 10500L/h is a submersible stream pump which by simulating a wave motion increases water circulation in the feed tank and prevents precipitation of dissolved nutrients. Thanks to the reliable magnetic support, the pump can be placed in any part of the tank. The possibility to rotate the support in 360°, practically allows you to direct it in any direction you want.

• flow: 10500L/h
• power: 17W
• suitable for tanks with volume: 700-1200L
• silent
• self cleaning impeller
• strong magnet mount
• wide and gentle flow
• 3 years warranty

Temperature, minimum-maximum speed controller with hysteresis setting.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 1x200W / TRIAC 1x16A
• Voltage: 230V 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to 100%
• Maximum speed: 100% to 50%
• Hysteresis: 1C° to 8C°

Garden Highpro PROFAN TT EXTRACTOR FAN 150 is a two-speed fan with a 100% copper engine (for better efficiency). The clamps in the housing allow it to be easily removed (for cleaning or change the direction of the airflow) without having to disconnect the air ducts.

• diameter: ⌀ 150mm
• 1^st  speed: 30W, 1680 rpm, 405m³/h
• 2^nd speed: 60W, 2460rpm, 520m³/h

The Dimlux Aux Box connects to the Dimlux Maxi Controller via the controller's aux port, thus turning it into a fully automatic air conditioning system . The Dimlux Aux Box has two connections - one for a heater or heater and one for a humidifier or dehumidifier . The control is electronic and there is no annoying buzzing.

Milwaukee EC monitor MC110

EC-professional monitor for continuous use

EC-monitor for continuous monitoring of fertilizer or hydroponic solutions, aquariums and akvaponni systems, pools and more. A convenient feature for a visual indication when the EC of the solution passes set value (up or down at selection of the button). Manual calibration EC 1413 μS / cm.

Milwaukee pH monitor MC110

pH-professional monitor for continuous use

pH-monitor for continuous monitoring of fertilizer or hydroponic solutions, aquariums and akvaponni systems, pools and more. A convenient feature for a visual indication when the pH of the solution passes set value (up or down at selection of the button). Manual calibration two fixed points - pH 4 and pH 7.

Separate binding sensor compatible with pH-monitors from other manufacturers.

Take quick measurements of the EC and temperature of your solution with the Bluelab Conductivity pen!

• completely waterproof
• simple one-point calibration
• 1 year warranty
• Auto-off function to extend battery life
• 1 x AAA alkaline battery (included)
• EC measurement range: 0.0 - 10.0
• accuracy: ± 0.1 at 25°C

Effectively control the climate in your grow room with TechGrow’s Clima Control Plus 7A - both day and night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 7 Amp / 1700W
• Adjustment range TMP set: 0 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to +5°C

Temperature, minimum speed and negative pressure controller.

Sizes and technical data:

• Controller: W80xH80xL130mm
• Case: W150xH110xL170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• Digital sensor 5V measures temperatures from –55°C to +125°C ( –67°F to +257°F )
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to 100%
• Negative pressure: 100% to 50%

TechGrow - Clima Micro Day / Night Fan Controller 5A is a controller that regulates the speed of your fan in two operating modes - day and night. You can easily set the desired speed with the rotary knobs, as well as a delay time of 0 to 10 minutes. The controller does not connect to a sensor and does not measure CO2, temperature or humidity!

• Very easy to use
• Adjustable fan speed for day and night mode
• Adjustable delay time up to 10 minutes
• Built-in light sensor

Effectively control the climate in your grow room with TechGrow’s Clima Control Plus 14A - both day and night.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 14 Amp / 3400W
• Maximum heater capacity: 14 Amp / 3400W
• Maximum total capacity: 16A
• Adjustment range TMP set: 0 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range temperature offset: -5 to +5°C

The Day/Night Fan Controller 7A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 8A
• triac: 12A
• power cable: 3 x 0.75 / 1.7m

Note: no connection for sensors available!

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 14A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 14 Amp / 3400W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

Take quick measurements of the pH and temperature of your solution with the Bluelab pH pen !

• completely waterproof
• simple two-point calibration
• 1 year warranty
• Auto-off function to extend battery life
• 1 x AAA alkaline battery (included)
• pH measurement range: 0.0 - 14.0
• accuracy: ± 0.1 at 25°C

Controlling the climate in your grow room with the TechGrow Clima Control Basic Plus 7A is simple but effective.

• Power supply: 100 to 240V
• Net frequency: 50 to 60Hz
• Consumption: 3W (excluding fan)
• Maximum capacity fan: 7 Amp / 1700W
• Adjustment range ТМР set: 10 - 45°C
• Adjustment range ТМР hyst +/-: 1 -7°C
• Probe: comes with a pre-mounted temperature probe on a 4.5m (15ft) cable

The Bluelab Connect Stick is a USB flash drive that allows recording of nutrient solution measurements and wireless monitoring.

• Ability to record data taken [when used with Bluelab Connect products (sold separately)]
• Download and install Bluelab Connect software for FREE
• Monitor data and its current status via Google Docs (requires a computer with constant internet access)
• 2 years warranty

Control the climate in your grow room effectively with TechGrow’s Clima Control 14A.

• Power supply: 100 to 240V
• Consumption: 3W (with sensor, without fan)
• Maximum fan capacity: 14 Amp / 3400W
• Adjustment range TMP: 10 - 50°C
• Adjustment range TMP hyst +/-: 0 - 5°C
• Adjustment range TMP offset: -5 to + 5°C 

The Day/Night Fan Controller 14A is the easiest to use climate control device by TechGrow for your indoor garden. The controller is very efficient and fully 'plug & play' (just connect it to the mains and turn it on). To adjust the day and night speeds of your fan, you can use the two rotary knobs, and the settings will switch automatically thanks to the built-in light sensor.

key functions:

• controls: fan speed
• display: no
• day/night detection: yes
• light sensor: yes, built-in
• thermal relay: no
• temperature alarm: no

power supply:

• input: 100 - 220V
• consumption: 3W
• fuse: 15A
• triac: 24A
• power cable: 3 x 1.5 / 1.7m

Note: no connection for sensors available!

A step-up transformer that allows you to drive fans without the low-frequency sound at low speed.

The six stages of control help to better control the output fan according to the temperature settings you have set.

Two buttons allow setting temperature and temperature hysteresis.
Through the built-in jumper - J1 (in the box) you can choose whether, when the desired temperature is reached, the fan continues to work at minimum speed or stops. When J1 is closed - ventilation continues to work at minimum speed. When open - stops the fan completely.

It is equipped with a 4m cable with a temperature and humidity sensor, an output fan contact and a waterproof case.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- size: 265mm x 300mm x 205mm
- max. Power: 2.5A
- Voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0.5C° in an interval from -10C° to +85C°; ±4.5%rh
- Degree of protection: IP54

Plant temperature is more important than ambient temperature! When the camera is connected, the climate can be controlled based on the temperature of the plant. If the temperature of the plant gets too high, the Dimlux Maxi Controller will dim the lights to keep the stomata open. In the event of a water shortage (e.g. due to a faulty pump) the lights are also dimmed or switched off to prevent crop damage.

• infrared heat detection camera
• extremely precise environmental control
• allows the Dimlux Maxi Controller to calculate VPD*
• used by the professional horticulture industry
• very easy to install – plugs right into the Dimlux Maxi Controller
• 10m cable

*Note: see what Vapor Pressure Deficiency (VPD) is in the detailed description.

A step-up transformer that allows you to drive fans without the low-frequency sound at low speed.

The six stages of control help to better control the exhaust fan according to the temperature and humidity settings you have set.

The four buttons allow setting temperature, temperature hysteresis, humidity and humidity hysteresis.
Through the built-in jumper - J1 (in the box) you can choose whether, when the desired temperature and humidity are reached, the fan continues to work at minimum speed or stops. When J1 is closed – ventilation continues to operate at minimum speed. When open - stops the fan completely.

It is equipped with a 4m cable with a temperature and humidity sensor, an output fan contact and a waterproof case.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- humidity range: 30% - 100%
- humidity hysteresis: 6%-30%
- size: 265mm x 300mm x 205mm
- max. Power: 2.5A
- Voltage: 230V / 50HZ
- 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0.5C° in an interval from -10C° to +85C°; ±4.5%rh
- Degree of protection: IP54

Take quick measurements directly in the soil of your plants quickly and easily with the Bluelab Soil pH pen !

The Bluelab Soil pH pen is a device for measuring the pH and temperature of soils and other plant media. With this smart pen, you can be sure that the right nutrients are being provided to your plants. It can also measure in liquids... Convenient, right?

• completely waterproof
• effective in most growing media and in water/solution
• 1 year warranty
• simple two-point calibration
• Auto-off function to extend battery life
• 1 x AAA alkaline battery (included)
• pH measurement range: 0.0 - 14.0
• accuracy: ± 0.1 at 25°C

Digital ventilation controller

• 2 outputs for fans - for input and output; phase controlled
• with 2 additional programmable outputs that can be set as timers or connected to sensor readings.
• LCD screen
• 1 combined (air) temperature, humidity and light sensor
• 1 waterproof temperature sensor
• Solid aluminum body
• Up to 2200W load on a single output, or 3600W in total
• Various options for setting day/night modes.
• Depending on the version - USB port for recording data on a flash drive (CSV format).
• Free slot for underpressure sensor
• 2m power cable
• 4m sensor cables, extendable to 10m
• Digital screen and 4 buttons
• Light indication for activation of the terminals


Tech. data:
dimensions: 150 x 210 x 110 mm
power supply: 230V / 50Hz
max. power: 16A / 3600W
temperature and humidity sensor: 5V; -55°C ... + 125°C; accuracy 0.5°C / ± 4.5% RH
waterproof sensor: 5V, -55°C ... + 125°C; accuracy 0.5°C
protection class: IP54

Torin Sifan Aric 16A is a fan controller that regulates the voltage using microprocessor technology (digital transformer control).

• can control up to 3 fans
• working temperature: 0 - 40°C
• 1-phase power supply: 230 VAC ± 10%
• frequency: 50/60 Hz
• max. current: 16A
• length of power cable: 1.5m
• length of temp. sensor: 5m
• temp. range (Tset): 0 - 40°C

The Neptune Hydroponics CO₂ controller is automatically calibrated device and has an optimal operating range of 10 to 50Cº, 10 to 70% RH. The digital display and light sensor allow easy adjustment and maintenance of the set carbon dioxide level, with no supply at night. The controller can control both CO₂ bottles and burners.

• CO₂ measurement range: 0 - 2000ppm
• calibration: automatic calibration system
• highest CO₂ setting by default: 820ppm
• lower CO₂ setting by default: 780ppm
• consumption: 1.8W

Forget about switchboard, timer-box and relays! Dimlux lighting fixtures can be plugged directly into the outlet ! Just set the on and off times and your lighting is ready to go!

Dimlux Maxi Controller is a modular system for controlling Dimlux lighting , fan and heating . It can control up to 160 Dimlux luminaires or ballasts. You can set the desired brightness using the + and - buttons. The Maxi controller controls and monitors CO ₂ , plant temperature and vapor pressure deficit ( VPD ) depending on the selected connected sensors. Why choose Dimlux Maxi Controller?

1. Gradual to continuous variable dimming.
2. Create optimal conditions for growing your crop.
3. Advanced connectivity and control capabilities.
4. Simulates sunrise and sunset .
5. Datalog function (permanent recording of measured data)

Introducing Silent Fan 300mm - the perfect tool to ensure optimal ventilation without unwanted noise. Built with innovative technologies, this fan offers efficiency and reliability in a stylish and compact design.

The Bluelab PeriPod M3 allows for automated maintenance of ideal pH and nutrient levels in your tank!

• 1x 120ml/min peristaltic pump for dosing pH adjustment solutions
• 2x 120ml/min peristaltic pumps for nutrient dosing
• robust housing and wall mounting option
• individual pump filling and calibration
• replaceable peristaltic pumps and tubes
• 4 m. alkali-resistant tubes for dosing pH regulator
• 2x 4m. tubes for nutrient solution dosing
• compatible with most modern growing systems, including recirculating and standard drain systems
• compatible with Bluelab Pro Controller

* Please note: Only M-series pumps (M3 and M4) can be connected together. L3 can only be connected to other L3s.

Hager Power Panel 48x600w, 8x continu en 3x kachel/heater

The OptiClimate 3500 PRO3 is a water-cooled air conditioner that cools the air using water and heats it using ceramic heaters. It is an independent climate system that perfectly controls the indoor climate , consuming as little energy as possible. OptiClimate has an inlet and outlet for water. The entrance is connected to the water supply. The cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. This hot water is then channeled through the water outlet or recycled.

• functions for: cooling , heating , air drying (dehumidifier), circulation and air filtration .
• current consumption 230V: 740W
• cooling capacity: 3.5kW (for 6 x 600 HPS)
• dehumidifies: 55l (for 24h)
• water consumption: 1-2 l/min
• 2 x 1500W ceramic heaters
• flange diameter: ⌀ 250mm (1pc included)
• dimensions: 100 x 50 x 42cm
• weight: 57 kg
• warranty: 1 year

The Dimlux Humidity (RH) Sensor displays the ambient humidity in real time on the Dimlux Maxi controller . If the relative humidity sensor is connected, you can also connect a humidifier to the Maxi controller. If you want the vapor pressure deficit (VPD) * to be displayed, a plant temperature camera and the Dimlux temperature sensor will also be required.

• measures relative humidity levels in the room
• precise and professional equipment
• 10m cable

*Note: see what Vapor Pressure Deficiency (VPD) is in the detailed description.

The Dimlux temperature sensor allows the Dimlux Maxi Controller to dim the lights based on the ambient temperature in the grow room. If the set value is exceeded, the lights will dim to keep the temperature under control. If the temperature remains elevated despite dimming, half of the dimmed lights will be turned off in a checkerboard pattern. If the temperature continues to rise, all lights will be turned off for at least 20 minutes .

• measures the temperature levels in the room
• precise and professional equipment
• 10m cable

LUMii Cord Set with 4m Cord

The LUMii® Reflector Cord Set is 4m long to IEC and can be used on it's own to hang lamps or used with LUMii® shades. If using on it's own we recommend the use of the hanging bracket which is designed to take stress off the cable. Cord Set is ideal for lamps up to 600w.

4m Cord (0.75mm Cord) E40 Lamp socket,

use with addtitional LUMII hanging bracket also available for easy vertical hanging via rope ratchets

The CO₂ generator increases the CO₂ value in your greenhouse. It makes it possible to provide your greenhouse with extra CO₂ when needed so that the CO₂ value always reaches the desired level. With the right amount of CO₂ in the area, plants will become more active and therefore grow faster. The generator operates without pilot flame, but by electric ignition which leads to a lower gas consumption.