Calibration Solutions for pH & EC Metres

Essentials CF Standard 2.8ms 30ml is a buffered solution / calibration fluid for instruments measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 2.8 µS/cm at 25°C
• volume: 30 ml
• single use

Milwaukee Electrode Rinse Solution 20ml is ideal for rinsing your electrode between different calibration fluids, thus avoiding mixing them. This rinse solution is also ideal for removing any build-up on the probe or cap caused by evaporation of the storage solution. Although the build-up of this build-up is normal, it must be removed before measuring or calibrating !

• Does not replace cleaning or storage solutions!
• Prolongs life on your electrode!
• single use

Milwaukee 1413 µS/cm Conductivity Calibration Solution 20ml is a buffered solution / calibration fluid for instruments measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 1413 µS/cm at 25°C
• volume: 20 ml
• single use

Milwaukee 12880 µS/cm Conductivity Calibration Solution 20ml is a buffered solution / calibration fluid for instruments measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 12880 µS/cm at 25°C
• volume: 20 ml
• single use

Milwaukee pH 4.01 20ml buffered solution / calibration fluid for pH meters.

• accuracy: ±0.01 pH
• value: 4.01 pH at 25°C
• volume: 20 ml
• single use

Milwaukee pH 7.01 20ml buffered solution / calibration fluid for pH meters.

• accuracy: ±0.01 pH
• value: 7.01 pH at 25°C
• volume: 20 ml
• single use

Milwaukee pH 10.01 20ml buffered solution / calibration fluid for pH meters.

• accuracy: ±0.01 pH
• value: 10.01 pH at 25°C
• volume: 20 ml
• single use

Bluelab pH Probe Storage Cap. It is essential to replace the storage cap on the tip of the pH probe immediately after use and when storing. "If it dries out, it dies!" . Keep the tip of the pH probe wet by ensuring there is enough Bluelab pH Probe KCl Storage Solution to cover it.

Bluelab pH 4.0 Calibration Solution 20ml is a high-quality calibration solution for disposable pH sensors/probes. Bluelab calibration solutions are essential when it comes to working with all Bluelab meters. Bluelab calibration solutions are manufactured specifically for Bluelab products and meet high laboratory standards to ensure your Bluelab products last longer and are accurate.

• accuracy: ±0.01 pH
• value: 4.0 pH at 25°C
• volume: 20 ml
• single use

Bluelab pH 7.0 Calibration Solution - Sachet 20ml is a high-quality solution for calibrating disposable pH probes.

Bluelab calibration fluids are essential when it comes to working with all Bluelab meters.

Bluelab calibration fluids are manufactured specifically for Bluelab products and meet high laboratory standards to ensure your Bluelab products last longer and are accurate.

VitaLink ESSENTIALS CF Calibration Fluid 2.8 µS/cm 250ml is a buffered solution / calibration fluid for devices measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 2.8 µS/cm at 25°C
• volume: 250 ml
• for multiple calibration

Milwaukee MA9069 5000 µS/cm Conductivity Solution 230ml is a buffered solution / calibration fluid for instruments measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 5000 µS/cm at 25°C
• volume: 230 ml
• for multiple calibration

Bluelab 2.77 EC Conductivity Standard Solution 250ml is a high-quality solution for calibrating EC instruments (electrical conductivity measuring instruments). Bluelab calibration fluids are essential when it comes to working with all Bluelab measuring instruments. Bluelab calibration fluids are manufactured specifically for Bluelab products and meet high laboratory standards to ensure that your Bluelab products will last longer and be accurate.

• accuracy: ±0.01 EC
• value: 2.77 µS/cm at 25°C
• volume: 250 ml
• for multiple calibration

Bluelab pH 4.0 Calibration Solution 250ml is a high-quality calibration solution for disposable pH sensors/probes. Bluelab calibration fluids are essential when it comes to working with all Bluelab meters. Bluelab calibration fluids are manufactured specifically for Bluelab products and meet high laboratory standards to ensure your Bluelab products last longer and are accurate.

• accuracy: ±0.01 pH
• value: 4.0 pH at 25°C
• volume: 250 ml
• for multiple calibration

Bluelab pH 7.0 Calibration Solution 250ml is a high-quality calibration solution for disposable pH sensors/probes. Bluelab calibration fluids are essential when it comes to working with all Bluelab meters. Bluelab calibration fluids are manufactured specifically for Bluelab products and meet high laboratory standards to ensure your Bluelab products last longer and are accurate.

• accuracy: ±0.01 pH
• value: 4.0 pH at 25°C
• volume: 250 ml
• for multiple calibration

Extend the life of your pH meter, sensor, probe or ORP electrode with the Milwaukee MA9015 Storage Solution for pH / ORP Electrodes 230ml!

To have fast and accurate pH and ORP measurements of your solutions, you should not let your sensor dry out! Proper storage of your pH sensor in solution keeps the glass membrane well hydrated , which maintains proper functioning and ensures accurate readings .

• storage solution
• volume: 230ml

Milwaukee MA9016 Cleaning Solution for pH / ORP Electrodes 230ml is specially designed to improve and extend the life of the pH sensors and ORP electrodes of your devices!

The accuracy and speed of measurements depend on whether the tip of the pH sensor or the ORP electrode is clean!

• electrode cleaning solution
• volume: 230 ml

Bluelab pH Probe KCl Storage Solution 100ml is the ideal solution for storing and hydrating your Bluelab pH probes or pens. Every self-respecting gardener should have it if they want to maximize the life of these sensitive glass instruments, which are already aging with daily use. The storage solution is suitable / compatible with:

• Bluelab pH pen
• Bluelab Soil pH pen
• Bluelab pH Meter
• Bluelab pH Probe

Bluelab Probe Care Kit - pH is a kit containing everything you need to clean, hydrate and calibrate the probe of your pH meter:

• Instructions on how to care for your probe
• 2 x Bluelab pH 7.0 Calibration Solution - Sachet 20ml
• 2 x Bluelab pH 4.0 Calibration Solution - Sachet 20ml
• 2 x Bluelab pH Probe KCl Storage Solution - Sachet 20ml
• 3 plastic cups
• Probe cleaner
• Bluelab toothbrush (transducer cleaning tool)

Bluelab pH Probe KCl Storage Solution 250ml is the ideal solution for storing and hydrating your Bluelab pH probes or pens. Every self-respecting gardener should have it if they want to maximize the life of these sensitive glass instruments, which are already aging with daily use. The storage solution is suitable / compatible with:

• Bluelab pH pen
• Bluelab Soil pH pen
• Bluelab pH Meter
• Bluelab pH Probe

Bluelab Probe Care Kit – pH & Conductivity is a kit containing everything you need to clean, hydrate and calibrate the probe of your pH meter, as well as to clean and test the probe of your EC meter (electrical conductivity meter):

• Instructions on how to care for the probes of your devices
• 2 x Bluelab pH 7.0 Calibration Solution - Sachet 20ml
• 2 x Bluelab pH 4.0 Calibration Solution - Sachet 20ml
• 2 x Bluelab pH Probe KCl Storage Solution - Sachet 20ml for single use
• 2 x Bluelab 2.77 EC Conductivity Standard Solution Sachet 20ml for single use
• pH probe cleaner
• EC probe cleaner
• pH probe cleaning tool
• EC probe cleaning tool

Bluelab Probe Care Kit - Conductivity