Milwaukee MC720 ( pH controller MC122 with pump MP810 )

professional pH-controller with a pump for long-term use

pH monitor for constant monitoring of hydroponic or fertilizer solutions, aquariums and aquaponic systems, pools, etc. Convenient function for visual indication when the pH of the solution passes a set value (up or down, selectable by knob).
Manual calibration at 2 fixed points - pH 4 and pH 7.

Separately connectable sensor compatible with pH monitors of other manufacturers.

MP810 peristaltic pump

Constant flow: 1.5l/h (25mL/min)
No regulation
Maximum pressure: 1.5 bar
Made of polypropylene (PP)
Peristaltic tube - Santoprene
Outlet diameter: 6mm
Dimensions: 100 x 106 x 108 mm; 500g
power: 0.42W
power supply: 230W ±10%

MC 122 pH-Monitor

range: pH 0.0 to 14.00
possibility to adjust pH indication: 5.5 - 9.5
indication/output signal: when the measured value is above or below the selected setting
LED indication when set values are exceeded
Resolution: 0.1 pH
Accuracy: ±0.2pH (at 25°C)
Calibration: manual, at two points (at pH 4 or 10.7)
The set includes: 12V voltage adapter; electrode with cable 2m; pH 7 calibration fluid.
Working conditions: temp. 0-50°C, humidity up to 95%
Output power: 230W, 1A, 50Hz
Dimensions: 148.5 x 82.5 x 32 mm; 180g
Manufacturer's warranty - 2 years for the device, 6 months for the sensor. Does not apply to mechanical damage and improper operation!
It is recommended to dilute the pH-correcting solution in a ratio of 1:50!