The PH600 is a digital pH pen from Milwaukee's budget-friendly range of meters. It is ideal for hydroponics and aquarists .

• Fast and accurate results with digital LCD display.
• Easy measurement : simply place the probe in the water, stir gently and wait for the readings to stabilize.
• Easy single-point calibration with an easy-to-use trimmer located on the back of the pH tester to protect against accidental splashes.
• A cap to protect the pH sensor to keep it wet when stored upright.
• Low power consumption for extended battery life ( batteries included ).

The CD611 is a digital pen for measuring the electrical conductivity ( EC ) of liquids from Milwaukee's economy class of meters. Suitable for hobby gardeners who want to make sure their plants are getting the right amount of nutrients .

• Measures conductivity and temperature with automatic temperature compensation
• Ideal range for hydroponics ( 0 to 20,000 µS/cm )
• Units of measurement in µS/cm can be easily converted to ppm
• Factory calibrated with the ability to recalibrate if necessary

The MA73600 is a replacement pH electrode for the Milwaukee pH51 and Milwaukee pH54 pH testers ( sold separately ).

• measures: pH and temperature of solutions
• easy installation
• measuring range : 0.0 - 14.0 pH
• resolution: 0.1 pH
• measurement accuracy: ±0.1 pH
• warranty: 6 months

The Milwaukee pH51 is one of the most accurate , rugged and reliable budget pH testers on the market. The easy-to-replace probe provides years of worry-free use. Ideal for use in hydroponics , aquariums , gardening , swimming pools and many other applications.

• fast and easy-to-read results with large digital LCD display
• exceptional measurement accuracy: ±0.1 pH
• measuring range: 0.0 - 14.0 pH
• easy manual calibration : 1-point or 2-point
• completely waterproof ( IP65 )
• built-in electrode: MA73600 ( replaceable )

With the Milwaukee Pocket Mi6000 kit you will be able to monitor the temperature , pH and electrical conductivity ( EC ) levels of your plants' nutrient solution. The kit includes:

• 1x Milwaukee pH600 digital pH meter pen
• 1x Milwaukee CD611 EC Digital Pen
• 1x hard plastic storage case

The Milwaukee C66 is one of the most reliable budget EC and solution temperature testers on the market. Designed for growers who want to make sure their plants are getting the right amount of nutrients . By keeping EC levels in the target range, you will achieve better results.

• measures conductivity ( EC ) and temperature with automatic temperature compensation (ATC)
• measuring range: 0.0 - 10.00 mS/cm
• measurement accuracy: ±2%
• measurement units mS/cm , which can easily be converted to ppm (parts per million)
• factory calibrated with the possibility of recalibration (if necessary)
• completely waterproof ( IP65 )
• built-in electrode: MA73076 ( replaceable )

Milwaukee MA911B/2 is a replacement pH probe for the Milwaukee MC110 PRO pH meter ( sold separately ).

• measures: pH and temperature of solutions
• measuring range: 0.0 - 14.0 pH
• operating environment: -5 to 70°C
• dimensions: 12 / 16 cm , ⌀ 1.27 cm
• cable length: 2 m
• connection: BNC
• warranty: 6 months

Milwaukee MI56P is a replacement pH electrode for Milwaukee pH55 and Milwaukee pH56 pH testers ( sold separately ).

• measures: pH and temperature of solutions
• easy installation
• measuring range: 0.0 - 14.0 pH
• resolution: 0.1 pH
• measurement accuracy: ±0.1 pH
• warranty: 6 months

Milwaukee EC meter CD60

professional EC-meter

Professional Waterproof EC-meter with temperature display, automatic temperature compensation and automatic calibration.

Shows EC or PPM; plus the temperature of the solution.

Function "HOLD" to save the measured value.

Replaceable sensor.

Milwaukee EC monitor MC110

EC-professional monitor for continuous use

EC-monitor for continuous monitoring of fertilizer or hydroponic solutions, aquariums and akvaponni systems, pools and more. A convenient feature for a visual indication when the EC of the solution passes set value (up or down at selection of the button). Manual calibration EC 1413 μS / cm.

Milwaukee pH monitor MC110

pH-professional monitor for continuous use

pH-monitor for continuous monitoring of fertilizer or hydroponic solutions, aquariums and akvaponni systems, pools and more. A convenient feature for a visual indication when the pH of the solution passes set value (up or down at selection of the button). Manual calibration two fixed points - pH 4 and pH 7.

Separate binding sensor compatible with pH-monitors from other manufacturers.

The ilwaukee EC40 EC/TDS Nutrient Meter measures conductivity ( EC ) and total dissolved solids ( TDS ) in nutrient solutions used in hydroponics , horticulture or agriculture . With this meter, you will always know the exact amounts of nutrients your plants are receiving, ensuring healthy growth and zero product loss .

• measures conductivity ( EC ) and total dissolved solids ( TDS ) with automatic temperature compensation
• ideal for hydroponics applications: provides measurements in EC , CF , ppm700 and ppm500 scales
• measuring range: 0.2 - 4 mS/cm / 2 - 40 CF / 140 - 2800 ppm (0.7 scale) / 100 - 2000 ppm (0.5 scale)
• measurement accuracy (EC): ± 4% at 25°C
• units directly in mS/cm/CF/PPM ( no conversions needed )
• factory calibrated ,   no continuous calibration required
• auto-off / auto-on functions: auto-off / auto-on
• blue LED indicators
• battery level indicators

Automate the dosing of pH regulator to your solution using the Milwaukee MP810 peristaltic dosing pump!

The pump offers a maximum pressure of 1.5 bar or more than 15 m. of head with a dosing flow of 0.6 l/min .

• constant dosing flow rate: 1.5 l/h ( 25 ml/min )
• without regulation
• maximum pressure: 1.5 bar
• made of: polypropylene ( PP )
• peristaltic tube made of: santoprene
• tube diameter: outer ⌀ 6mm.
• power supply: 240 VAC ± 10%
• power consumption: 0.42 W
• Dimensions: 9.9 x 10.7 x 10.9 cm.
• weight: 0.5 kg

Automate controlling the pH of your solution using the Milwaukee MC122 PRO pH Controller!

The Milwaukee MC122 PRO pH Controller automatically monitors and fine-tunes pH levels. Simply set your pH parameters and let the MC122 PRO do the rest. Recommended for hydroponic plant growing or aquariums.

• pH measurement accuracy: ± 0.2 with two-point manual calibration
• control range: from 5.5 to 9.5 pH with alarms that are activated when readings are higher or lower than the set value
• pH electrode: MA911B/2 (included )
• compatible with Milwaukee MP810 metering pump 1.5l/h (25ml/min ) ( not included )
• Device warranty: 2 years
• pH probe warranty: 6 months

Milwaukee's MW804 MAX Waterproof 4-in-1 pH/EC/TDS/Temp Tester is an all-in-one meter for everyday measurements . It measures pH , conductivity ( EC ), total dissolved solids ( TDS ), and temperature of the nutrient solution.

• measuring range: 0.00-14.00 pH / 0.00 - 20.00 mS/cm EC / 0.00 - 10.00 ppt TDS / 0.0 - 50.0°C temp.
• resolution: 0.01 pH / 0.01 mS/cm / 0.0 1 ppt / 0.1°C
• accuracy: ±0.05 pH / 2% EC/TDS / ±0.5°C
• calibration: automatic
• fast and easy-to-read results with large digital LCD display
• auto- off function: after 8 minutes of non-use
• completely waterproof ( IP65 )

With the Milwaukee MA871 Digital Refractometer (0 - 85% Brix), measuring sugar content is now as easy as child's play!

The Milwaukee MA871 Digital Refractometer features automatic temperature compensation and a range of 0 - 85% BRIX and +/- 0.2% accuracy . It is easy to use with simple two-button operation and fast with a response time of under 2 seconds. Maintenance is easy and with an easy-to-clean sealed crystal glass prism and stainless steel socket

• Ideal for winemakers , brewers , fruit and vegetable growers , maple syrup producers and food manufacturers.
• Fast and accurate results with digital two-stage LCD readout.
• Easy measurement with only 2-3 drops of sample required and results in less than 2 seconds .
• Easy single-point calibration using distilled or deionized water .
• Easy-to-clean stainless steel sample well with module classified as IP65 as "dust-proof" and protected against water jets.

Take quick measurements directly in the soil of your plants quickly and easily with the Milwaukee MW101-SOIL PRO!

The Milwaukee MW101-SOIL PRO is designed to measure pH directly in the soil, making it ideal for use in professional gardening and agriculture , but can also be used in hydroponics.

• fast and easy-to-read results with large digital LCD display
• accuracy up to ±0.02 pH , measurement range 0.00 - 14.00 pH
• lightweight and portable
• easy measurement : simply insert the probe directly into the soil of your plants and wait for the readings to stabilize
• easy manual two-point calibration for increased accuracy
• auto-off function

Automate the pH control of your solution with the Milwaukee MC720 PRO pH Controller and Pump Kit . The kit includes:

• 1x controller with pH-probe Milwaukee MC122 PRO pH Controller
• 1x dosing pump Milwaukee MP810 1.5l/h (25ml/min)

This 3-in-1 combination meter allows you to measure pH, EC (electrical conductivity) and TDS (total dissolved solids) with one meter and a single probe!

Designed for hydroponics, aquaponics and greenhouse growers, the Milwaukee MW802 PRO is extremely robust and easy to use - with a single probe, large display, easy calibration. The unit's robust construction and durable yet replaceable probe mean you can expect years of use.

• pH , EC (electrical conductivity), TDS (ppm) with automatic temperature compensation
• replaceable, built-in pH, EC and TDS (ppm) probe SE600 with 1m cable ( included in the kit)
• large , easy-to-read display
• factory calibrated (single-point calibration for pH and EC)
• Measuring range: 0.00 - 14.00 pH / 0.00 - 6.00 m S/cm / 0 - 4000 ppm
• Measurement accuracy: ±0.2 pH / ±2% full scale EC/TDS
• specially designed for use in hydroponics , aquaristics and   greenhouses

ACCURATE. SIMPLE. RELIABLE. 24 HOURS / 7 DAYS A WEEK pH/EC/ temp. monitoring.

The Milwaukee MC811 MAX pH/EC/Temp Monitor allows you to monitor pH/TDS/Temp levels 24/7 automatically! Simply calibrate the parameters and let the MC811 MAX do the rest . The Milwaukee pH/EC/Temp Monitor is preferred by people who want to know 24/7 what their pH and nutrient levels are at all times. Common applications include nutrient tanks , hydroponic systems and aquariums . The monitor offers:

• Measuring range: 0.0 - 12.0 pH / 0.00 - 5.00 mS/cm EC / -10.0 to 60.0°C
• measurement accuracy: ± 0.2 pH / ± 2% EC / 0.3°C temp.
• resolution: 0.1 pH / 0.01 mS/cm / 0.1°C
• easy calibration : 2-point ( pH ) and 1-point ( EC ), manual
• fast and easy-to-read results thanks to 3 large LCD displays
• pH probe MA911B/2 ( included in the kit)

Simply calibrate the parameters and start monitoring 24/7!