Soil A&B 2 x 10 L

House and Garden Soil A & B contains no unnecessary bulking agents such as those found in solid fertilisers. It contains pure, high-quality nutrients, including EDDHA iron. This enables the plant to absorb nutrients quickly and efficiently during growth and flowering. Preparing the nutrient tank: Fill two thirds of the tank with water. Add A first and mix well. Add B and mix well. Set electrical conductivity: start at 1.2 (EC 1.2), increase according to the growth schedule until the end of flowering, and finish at 2.0 (EC 2.0). Add pH- (down) or pH+ (up) to maintain a value of 5.7 to 6.7. Top up the tank with water. Use root-growth or flowering stimulators if necessary. Your tank is ready for the first watering. Running water with an electrical conductivity value + Soil A&B with an electrical conductivity value = ready-to-use feed. Advice: Do not add Soil A and Soil B at the same time. This leads to improper feeding, build-up or clogging. Use EC and pH measuring instruments. For optimal absorption, moisten substrates thoroughly (+/- 90% moisture) before planting. Fill the cover or reservoir with water containing a light feed at EC 1.2 and leave for one day. Cut the bottom of the cover or open the plant container so excess water drains back into the nutrient reservoir. The substrate is ready for planting. Thereafter, keep the substrate slightly dry so roots can seek food and water. This activates the plant. Quantity and available reservoir sizes: Quantity: 1 litre for every 250 litres of ready-to-use feed; available reservoir sizes: 5 and 10 litres.

Soil A & B contains no unnecessary swelling agents such as solid fertilisers. It contains pure, high-quality nutrients, including EDDHA iron. This allows the plant to absorb nutrients quickly and effectively during growth and flowering. Preparing the nutrient reservoir: fill two thirds of the reservoir with water. Add A first and mix well. Add B and mix well. Set the electrical conductivity: start at 1.2 (EC 1.2), increase according to the feeding schedule until the end of flowering, and finish at 2.0 (EC 2.0). Add pH- (down) or pH+ (up) to keep pH between 5.7 and 6.7. Top up the reservoir with water. Use root-growth or flowering stimulants if required. The reservoir is ready for the first watering. Running water with an EC value + Soil A&B with an EC value = ready-to-use feed. Tip: do not add Soil A and Soil B at the same time. This causes inadequate feeding, build-up or clogging. Use EC and pH meters. For optimal uptake, thoroughly moisten substrates (+/- 90% moisture) before planting. Fill the cover or reservoir with water containing a light EC 1.2 feed and leave for one day. Cut the bottom of the cover or open the plant container so excess water drains back into the feed reservoir. The substrate is ready for planting. From then on, keep the substrate slightly dry so roots seek food and water; this activates the plant. Quantity and available reservoir sizes: 1 litre for every 250 litres of ready-to-use feed; available reservoir sizes: 5 and 10 litres.