Lighting

Adjust-A-Wings AVENGER Large reflector is the best and best-selling product from Adjust-A-Wings. Its super-reflective surface is vapour-coated with molten glass, titanium dioxide and PVD / ceramic, providing an enormous light reflectance of 95-97%. This is the most reflective and durable reflective surface on the market and can retain its full light reflectance for 20 years.

• Coverage area: 3.89 m²
• Overall dimensions at the widest setting 100 cm x 70 cm
• Perfect for one 1000W / two 400W / two 600W sodium / metal-halide lamps

 

Feature:

 

• Twice the power and efficiency of most other reflectors
• Corrosion-resistant
• 97% light reflectance
• Super alloy with glass coating
• Supplied with Super Spreader

 

Adjust-A-Wings® reflectors are efficient and multifunctional. They can be adjusted to different configurations according to your needs – a wider light beam for lower placement, or a more concentrated beam for higher mounting. They are constructed with a minimum of moving parts. The double-parabolic shape helps achieve even light distribution. The movable socket allows the bulb to be positioned at different focal distances to adapt to different bulb sizes or reflector shapes. By adding the Super-Spreader™ (a mesh reflector beneath the bulb), Adjust-A-Wings reflectors can be placed even closer to plants to achieve maximum lighting levels without creating a higher-intensity hot spot and overheating directly beneath the reflector.

AVENGER is one of the best reflectors in the world, on the market since 2003. It has excellent reflectance (95-97%) thanks to a special surface layer of glass and titanium dioxide, which protects the surface against corrosion and clouding for up to 20 years.

Dimensions in the widest position: 100cm x 70cm

LUMii Solar Pro 315W + 5m cable indoor growing lighting kit. The set consists of:

 

• LUMii SOLAR 315 W CDM Ballast 1 pc.
• LUMii SOLAR 315W Reflector – Wide Angle Version 1 pc.
• 5 m cable (connecting the ballast and reflector)

 

Note: the set does not include a bulb!

ViparSpectra XS1000 100W is a budget, high-efficiency diode / LED lighting for growing plants indoors. 

 

• industry-leading Samsung LM301B diodes
• ballast Mean Well Driver
• full spectrum, similar to sunlight
• including infrared LEDs (IR)
• built-in dimmer for power adjustment 5% - 100%
• conformal silicone sealant coating on waterproof LEDs
• passive cooling with a larger-surface heat sink
• completely silent

 

• power: 100W ± 3%
• coverage area (during vegetative growth): 76.2 x 76.2 cm (at a height of 0.46 m)
• coverage area (during the flowering phase): 61 x 61 cm (at a height of 0.36 m)
• dimensions: 30.5 x 28.0 x 6.6 cm
• weight: 2.27 kg

Technical specifications:

 

• dimensions: 30.5 x 28.0 x 6.6 cm
• weight: 2.27 kg
• LED chips: Samsung LM301B diodes, incl.:

1. 3000K warm white 
2. 6500K white 
3. 660nm deep red 
4. 730nm infrared

• coverage area (during vegetative growth): 76.2 x 76.2 cm (at a height of 0.46 m)
• coverage area (during the flowering phase): 61 x 61 cm (at a height of 0.36 m)
• power: 100W ± 3%
• current: 100-240 V, 50-60 Hz
• passive cooling
• noise level: 0dB
• lifespan: 100,000 h
• warranty: 2 years
• the set includes: ViparSpectra XS1000, user manual, 3 m power cable, hanging kit

Lux-Rooting TL LED V.2 24W 120cm 6500K 2.3μmol/J is a single LED strip suitable for seed germination and propagation of clones / cuttings or seedlings. Using the power cable, you can connect several single LED strips in series.

• for growth
• power: 24W
• length: 120cm
• colour temperature: 6500K
• efficacy: 2.3μmol/J
• includes 2 pcs. plates for hanging
• recommended hanging height: 20cm from the tops of the plants
• lifetime: >35 000 hours

The power cable is not included - sold separately! You can purchase it here*!

Agrolite Dark Night Green LED Light 20W is a bulb emitting green light, which allows you to observe your plants during the dark hours.

 

• power: 20W
• light: green LED
• socket: E27

 

Plants do not photosynthesise under green light (510 nm), which allows them to be observed when needed, without stressing them or affecting their life cycle.

Metal-halide / MH bulb / lamp for the growth / vegetative phase.

Metal-halide lamp, suitable for plants in the vegetative stage. Connects to a 1000W ballast.

Enhanced blue-spectrum output for lush growth.

• Socket: E40
• Coverage area: 2.25m²
• Luminous flux: 100 000 lm
• Luminous efficacy: 100 lm/W
• Lifetime: 10 000 hours
• Colour temperature: 4000 K

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

Lumatek MH Lamp 400W 240V is a pulse-start* metal halide lamp for growth / vegetation. It is made from durable quartz, allowing the lamp to operate at higher internal temperatures and increasing power and efficiency. Pulse-start technology enables faster start and restart times, longer lamp life and increased PAR / PPF output maintenance.

• for growth
• power: 400W
• current: 4.6 A
• life span: 10 000 h
• luminous flux: 35 000 lm
• colour temperature: 6000 K
• efficiency: 88 lm/W
• PPF: 500μmol/s
• power supply: 240V, 50Hz
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

LUMII Cord Set with a 4 m cable is a high-quality, versatile power set designed for convenient and safe connection of your lighting systems. This set includes a standard E40 lampholder and a 4-metre power cable, providing ample length for maximum installation flexibility. The E40 lampholder is compatible with many lamp types, including sodium and metal-halide lamps, making it versatile for different applications. LUMII Cord Set is made from high-quality materials that ensure years of use and exceptional reliability. The cable has wear- and heat-resistant insulation that protects the conductors and ensures safe operation. Installation is quick and easy thanks to the integrated metal bracket for securing the cable to the reflector. Whether you are a beginner gardener or a professional grower, this set helps you install and power your lighting systems with ease and confidence. Overall, the LUMII Cord Set with a 4 m cable is an indispensable part of any lighting system, offering quality, reliability and convenience you can rely on.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps. It combines the cooling capability of CoolTube with a large reflective surface. Use Ø150mm air ducts when connecting several reflectors in series.

PHILIPS GreenPower CDM-TP 315W/930  is a latest-generation ceramic discharge metal-halide (CDM) or ceramic metal-halide (CMH) lamp. The bulb emits long-lasting white light with a colour temperature of 3000K, making it ideal for use during the vegetative stage of plants grown indoors or outdoors.

• for the vegetative stage
• power: 315W
• consumption: 347kWh/1000h
• colour temperature: 3000K
• luminous flux: 36 200lm
• efficacy: 115 lm/W
• lamp base: PGZ18
• starting: connects to a special adapter* and ballast* (sold separately)

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Full technical specifications: here*

 

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

LUMii SOLAR 315W CMH FIXTURE lighting kit, which includes:

 

• Electronic ballast + reflector

The PVC liner for artificial ponds, measuring 6 × 25 m and 0.5 mm thick, is a reliable solution for building decorative ponds, water gardens, fountains, streams and other water features. Thanks to its high flexibility and water resistance, it easily follows the terrain and provides long-lasting protection against leaks.

The PVC liner is designed to provide reliable waterproofing when constructing various water features. The material is sufficiently flexible to follow curves, terraces and irregularities in the terrain, while maintaining its strength and resistance during prolonged use. This makes it suitable for both small decorative ponds and larger water projects.

With a thickness of 0.5 mm, the liner offers a good balance between strength and easy installation. It forms a reliable waterproof barrier that prevents water from seeping into the soil and reduces water loss from the artificial pond. In addition, the material is weather-resistant and can be easily cut and shaped to suit the specific project.

The liner is suitable for use in garden ponds, decorative water features, waterfalls and fountains. For maximum protection and a longer service life, it is recommended to install it over protective geotextile, which protects the membrane from punctures caused by stones, roots and other sharp objects.

 

 ^{Technical specifications}

✔️ Type: PVC liner for artificial ponds

✔️ Size: 6 × 25 m

✔️ Area: 150 m²

✔️ Thickness: 0.5 mm

✔️ Colour: Black

✔️ Material: PVC

✔️ Waterproof

✔️ Flexible and easy to shape

✔️ Weather-resistant

✔️ Suitable for outdoor use.

 

 Application

Suitable for:

• Garden ponds

• Decorative water features

• Fountains

• Waterfalls

• Streams

• Water gardens

• Landscaping projects

• Landscape design.

 

📋 Instructions for use

1. Prepare the base by removing stones, roots and other sharp objects.
2. It is recommended to lay protective geotextile beneath the liner.
3. Spread the liner over the excavated pond and shape it to the terrain.
4. Leave sufficient excess material around the edges for secure fixing.
5. Fill the pond gradually with water, smoothing out any folds that form.
6. Secure the edges with decorative stones, edging or another suitable material.

⚠️ Important: To reduce the risk of mechanical damage, always use protective geotextile beneath the liner. This significantly extends its service life and protects it from punctures caused by stones or roots.

💡 Tip from Urban Botaniks: For more complex pond shapes, leave extra liner material around the edges. This will make shaping easier and ensure more secure fixing after the final filling with water.

 

HortiLight Led 8 Green LED Headlamp is a headlamp that emits green light, designed for use during dark hours when you want to spray your plants or simply check on them.

 

• power supply: 3 x 1.5V AAA batteries (not included)
• 8 LEDs for powerful light output
• ergonomic and easy to use

 

The green spectrum provides plants with an uninterrupted night, does not disrupt their photoperiod cycle and therefore allows you to work in a way that is safe for their development.

LUMATEK LED Driver Remote Use 5m Extension Cables (x2) are two extension cables designed to connect the LUMATEK driver to the LUMATEK LED lighting fixture when the driver is used remotely, away from the lighting fixture. Providing a stable, precise connection without interference, this product consists of 2 components:

 

• LED driver extension cable 5m Extension Power Cable for LED driver
• dimming extension cable 5m Extension Dimming Cable

Lumatek Zeus LED grow lights and LED accessories: connection options for the various models in English here*.

 

1. LED driver extension cable 5m Extension Power Cable for LED driver. M19 - 2 self-locking male and female plugs with a 5 m extension cable.

 

Technical / test data:

• The withstand voltage between any two poles is 500 VAC, 2 mA, test time 3 s; no breakdown or leakage occurs.
• The withstand voltage between the outer coating and the electrode is 500 VAC, 2 mA, test time 3 s; no breakdown or leakage occurs.
• Insulation resistance: 100MΩ at 100V
• Temperature resistance: 105℃
• Operating temperature: -20 - 105℃
• Storage temperature: -25 - 105℃
• IP65 protection
• Complies with RoHS*

 

2. Dimming extension cable 5m Extension Dimming Cable. M12 - 2 self-locking male and female plugs with a 5 m extension cable.

 

Technical / test data:

• The withstand voltage between any two poles is 500 VAC, 1 mA, test time 3 s; no breakdown or leakage occurs.
• The withstand voltage between the outer coating and the electrode is 500 VAC, 1 mA, test time 3 s; no breakdown or leakage occurs.
• Insulation resistance: 100MΩ at 100V
• Temperature resistance: 105℃
• Operating temperature: -20 - 105℃
• Storage temperature: -25 - 105℃
• Complies with RoHS*

The PVC liner for artificial ponds, measuring 1 × 25 m and 0.5 mm thick, is a reliable solution for building decorative ponds, water gardens, fountains, streams and other water features. Thanks to its high flexibility and waterproof properties, it easily follows the terrain and provides long-lasting protection against leaks. We can cut your desired length

The PVC liner is designed to provide reliable waterproofing when constructing various water features. The material is sufficiently flexible to follow curves, terraces and irregularities in the terrain, while maintaining its strength and resistance during prolonged use. This makes it suitable for both small decorative ponds and larger water projects.

With a thickness of 0.5 mm, the liner offers a good balance between strength and easy installation. It forms a reliable waterproof barrier that prevents water from seeping into the soil and reduces water loss from the artificial pond. In addition, the material is weather-resistant and can be easily cut and shaped to suit the specific project.

The liner is suitable for use in garden ponds, decorative water features, waterfalls and fountains. For maximum protection and a longer service life, it is recommended to install it over protective geotextile, which protects the membrane from punctures caused by stones, roots and other sharp objects.

 

 ^{Technical specifications}

✔️ Type: PVC liner for artificial ponds

✔️ Size: 1 × 25 m - We can cut the length you need

✔️ Area: 1 m²

✔️ Thickness: 0.5 mm

✔️ Colour: Black

✔️ Material: PVC

✔️ Waterproof

✔️ Flexible and easy to shape

✔️ Weather-resistant

✔️ Suitable for outdoor use.

 

 Application

Suitable for:

• Garden ponds

• Decorative water features

• Fountains

• Waterfalls

• Streams

• Water gardens

• Landscaping projects

• Landscape design.

 

📋 Instructions for use

1. Prepare the base by removing stones, roots and other sharp objects.
2. It is recommended to lay protective geotextile beneath the liner.
3. Spread the liner over the excavated pond and shape it to the terrain.
4. Leave sufficient excess material around the edges for secure fixing.
5. Fill the pond gradually with water, smoothing out any folds that form.
6. Secure the edges with decorative stones, edging or another suitable material.

⚠️ Important: To reduce the risk of mechanical damage, always use protective geotextile beneath the liner. This significantly extends its service life and protects it from punctures caused by stones or roots.

💡 Tip from Urban Botaniks: For more complex pond shapes, leave extra liner material around the edges. This will make shaping easier and ensure more secure fixing after the final filling with water.

 

LUMii Digita 1000W Electronic Ballast is an electronic/digital ballast with dimming capability (reducing or increasing power) for 1000W high-pressure sodium (HPS) or metal-halide (MH) lamps. LUMii Digita 1000W Electronic Ballast is an electronic ballast with a built-in microprocessor that controls and operates at a higher frequency than standard analogue ballasts. Higher efficiency means more light for your plants. It enables rapid lamp ignition, saving energy. Quieter than any other ballast. Measurements indicate up to 30% more brightness than analogue ballasts. The electronic ballast solves the problem of irregular mains voltage. Analogue ballasts age over time, become noisy, consume more electricity and heat up more while their light output decreases. This does not happen with electronic ballasts: they maintain the same emission level and efficiency. For safe operation, the LUMii ballast is programmed to switch off in case of a short circuit, lamp failure or a missing lamp.

 

​

• Operating modes with a 1000W lamp: 250W, 400W, 600W, 1000W
• Operating modes with a 600W lamp: 250W, 400W, 600W, do not dim above 600W!
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W
• Supply voltage: 220–240V 50Hz
• Current: 4.6A
• ​Dimensions L/W/H: 48/39.5/24.5 cm
• Weight: 5.2 kg
• Warranty: 1 year

 

Disconnect the power when changing the lamp!

LUMATEK 1000W 240V CONTROLLABLE BALLAST is a digitally controllable ballast that can operate with both sodium (HPS) and metal-halide (MH) lamps. It provides stable, precise voltage to the lamp, delivering higher PAR/PPF output while being far more energy-efficient than most ballasts on the market. The ballast features intelligent start technology and a soft-dimming mechanism. It can be externally controlled with the LUMATEK Control Panel Plus 2.0 (sold separately).

 

• output power: 1000W
• 4 operating modes: 600W - 750W - 1000W - 1000W SL
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuits, overheating, overvoltage / undervoltage and end of lamp life!
• 5-year warranty!

An electronic ballast is a solution to the problem of irregular mains voltage. Magnetic ballasts age over time, become noisy and consume more electricity, while heating up ever more as their light output declines. This does not happen with digital ballasts: they maintain the same output and efficiency. LUMATEK ballasts are programmed for a “soft start”, meaning no voltage or current spike is required to start the lamp. This extends bulb life, does not strain the electrical installation and enables more ballasts to be started safely at the same time.

 

Full technical specifications:

 

• output power: 1000W
• Input voltage: 240V, 50/60Hz
• max. current: 4.7A
• power factor*: > 0.99
• THD*: < 10%
• dimming capability / 4 operating modes: 600W - 750W - 1000W - 1000W SL
• compatible with: 600W, 750W, 1000W HPS / MH lamps
• operating frequency: high frequency
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• dimensions: 318 x 166 x 96mm
• weight: 4.25 kg
• warranty: 5 years

 

Operating instructions:

 

• for use with a 600W HPS or MH lamp: the ballast must always be set to 600W mode only!
• for use with a 750W HPS or MH lamp: the ballast must never be set to 1000W or 1000W SL mode!
• for use with a 1000W HPS or MH lamp: start in 1000W mode and only after the lamp is fully warmed up (after around 10 min. of operation), you can switch to 1000W SL mode!

1. Disconnect the power when changing the lamp!
2. LUMATEK recommends replacing the lamp after 6-12 months of operation!
3. VERY IMPORTANT: allow the lamp to cool completely (20-30min.) before switching it on again! (Doing otherwise shortens its life.)
4. Also, do not switch the lamp off before it has reached full power!

Secret Jardin TNoled 2x20W Blooming is a complete LED lighting set for the flowering stage of indoor-grown plants. TNoled technology successfully replaces bulky fluorescent CFL and T5 bulbs of the recent past. 

 

• for flowering
• power: 40W
• voltage: 24V
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the plant tops)
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• dimensions L/W/H: 50 x 12 x 4cm
• warranty: 1 year

Full technical specifications: here*

 

Assembly instructions: here*

 

Technical specifications:

 

• for flowering
• power: 40W
• voltage: 24V
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm from the tops of the plants)
• dimming capability: yes
• water resistance: IP65
• robust and resistant to falls
• lifespan: + 30 000 hours
• dimensions L/W/H: 50 x 12 x 4cm
• 24V cable: 180cm
• 110V-220V cable: 60cm
• weight: 0.75kg

LUMii Black 600W and Maxibright Warpdrive set for indoor growing. The set includes:

 

• bulb / lamp: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open LUMii Black 1 pc.

 

Osram 600W, MST and Azerwing Set for indoor growing. The set includes:

 

• bulb / lamp: dual-spectrum Osram Plantastar 600W 1 pc.
• ballast: MST 600W hybrid 1 pc.
• reflector: open Azerwing 1 pc.

Caution: the kit does not include cables or a plug!

Lux-Rooting TL LED V.2 12W 60cm 6500K 2.3μmol/J is a single LED bar for growth, suitable for seed germination, rooting seedlings or propagating clones / cuttings. Using the power cable, you can connect several single LED bars in series.

• For growth
• Power: 12W
• Length: 60cm
• Colour temperature: 6500K
• Efficiency: 2.3μmol/J
• Recommended hanging height: 20cm above the tops of the plants
• Lifespan: >35 000 hours

The power cable is not included and is sold separately! You can purchase it here*.

Agrolite Magnetic Ballast CL2 CMH 315W is a lighting kit designed to work with the latest-generation CMH / CDM lamps (ceramic metal-halide / ceramic discharge metal-halide lamps).

 

• the kit includes: magnetic ballast, ignitor and capacitor
• mains cable: 1.5m.
• lamp cable with C13 connector: 0.2m
• for CMH / CDM lamps
• power: 315W
• power consumption: 3.64A
• voltage: 220/230V
• box dimensions L/W/H: 298x128x115mm.
• weight: 6.2kg.

Lumatek HPS Lamp 600W 400V is a pulse-start* sodium lamp suitable for growth / vegetative growth as well as flowering. 400V HPS lamps are more efficient than standard HPS lamps and therefore offer a 10% increase in light intensity and PAR / PPF output. Made using high-quality ceramic arc tube technology, the lamp can operate at higher internal temperatures, increasing power and efficiency. The pulse-start technology enables faster start and restart times, longer lamp life and increased PAR / PPF maintenance.

• for growth and flowering
• power: 600W
• current: 3.6A
• luminous flux: 90 000 lm
• efficacy: 150 lm/W
• PPF: 1100μmol/s
• efficacy: 1.83 μmol/s
• colour temperature: 2000K
• life: 24 000h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Secret Jardin Cosmorrow 100W Blooming is a complete diode / LED lighting set for the flowering stage of indoor-grown plants. The patented modular technology allows individual strips to be replaced (if you wish to add a different spectrum).

 

• for flowering
• power: 100W
• voltage: 24V
• efficiency: 2.4µmol/s
• coverage area: 60 x 60cm (when suspended 15cm above the plant tops)
• dimming option: yes
• water resistance: IP65
• robust and drop-resistant
• dimensions L/W/H: 50 x 40 x 6.5cm
• warranty: 1 year

Note: The set includes a power supply!

Full technical specifications: here*

 

Assembly instructions: here*

 

Technical specifications:

 

• for flowering
• power: 100W
• voltage: 24V
• efficiency: 2.4µmol/s
• LED strips: 5 x COP20BL
• coverage area: 60 x 60cm (when suspended 15cm above the plant tops)
• ​dimming capability: yes
• water resistance: IP65
• robust and resistant to drops
• lifetime: + 50 000 hours
• dimensions L/W/H: 50 x 40 x 6.5cm
• weight: 0.95kg

Lumatek power cable with EU plug

Osram Vialox NAV-T (SON-T) 1000W is a sodium/HPS bulb/lamp for the flowering stage.

• for flowering
• power: 1000W
• current: 10.6A
• luminous flux: 130 000 lm
• efficacy: 130 lm/W
• colour temperature: 2000 K\n
• lifetime: 8 000 h
• socket: E40\n

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Place at least 80 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

• Balanced full-spectrum light
• ​very high efficacy: 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Growing area with additional CO₂ supplementation: 1.5 x 1.5m.
• Growing area without additional CO₂ supplementation: 1.8 x 1.8m. (positioned higher above the plants)
• Lifespan: 60 000 hours
• Light source: Higher Spec Osram and Lumiled diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Dimensions: 1181.2 x 1091 x 105.7mm.
• Weight: 18kg.
• Warranty: 5 years

Technical specifications:

 

• Balanced full-spectrum light
• ​very high efficacy: 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Growing area: 1.5 x 1.5m. (with additional CO₂ supplementation)
• Growing area: 1.8 x 1.8m. (without additional CO₂ supplementation, position higher above the plants)
• Lifespan: 60 000 hours
• Light source: Higher Spec Osram and LUMLED diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1181.2 x 1091 x 105.7mm.
• Weight: 18kg.
• Warranty: 5 years

 

Full instructions for use: here*

 

Full technical specifications: here*

LUMii Black 600W, Maxibright Warpdrive and PEARLPRO XL kit for indoor growing. The kit includes:

 

• lamp / bulb: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open PEARLPRO XL 1pc.

Attention: the kit does not include a cable from the ballast to the reflector!

LUMii AeroTube 150mm. is the latest air-cooled reflector. When used together with ducting and a fan, this innovative product allows air to flow through the reflector, helping to control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Includes a 4m IEC cable
• Recommended power: up to 600W
• ∅ 150mm.

Secret Jardin Cosmorrow LED 40W L90cm UV is a single LED bar that emits in the ultraviolet spectrum. Ideal for supplementary vertical lighting for plants in your grow tent. The power supply is not included in the set - it is sold separately! You can purchase it here!

 

• strengthens the immune system
• combats mould
• shorter internodes

 

• power: 40W
• voltage: 24V
• efficiency: 1.6µmol/s
• light ratio: 33% UVA - 66% 6500°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• warranty: 1 year

We recommend using it with a separate timer from the main lighting!

Technical specifications:

 

• strengthens the immune system
• combats mould
• shorter internodes
• power: 40W
• voltage: 24V
• efficiency: 1.6µmol/s
• light ratio: 33% UVA - 66% 6500°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• dimensions L/W/H: 87 x 3.2 x 1.5cm
• weight: 0.30kg