ROOT!T

ROOT!T Rooting Gel 150ml is a rooting gel suitable for use with ornamental plants, softwood and hardwood plants, and leaf and root cuttings. This gel adheres tightly to the cutting stem and, with the practical bottle tip, can be applied directly into the rooting substrate (rockwool plugs, peat plugs, coconut fibre, compost or soil). For best results, we recommend using it together with ROOT!T Natural Rooting Sponges, 50 rooting sponges.

• Roots in 3-4 days without stress or wilting, while a strong root system develops from day one!
• Convenient packaging with a cap, so you do not need to decant it into other containers.
• Contains no hormones!
• Contains vitamin B1, which helps the root system grow faster.
• "Seals" the cutting by forming a protective layer over the cut surface, thereby preventing infections and dehydration.

Instructions for use:

• Always use sterile tools when taking cuttings!
• Pour approximately 1ml of gel directly into the hole for the cutting, so the gel will not be "wiped off" when inserting the cutting!
• Make sure the cuttings are placed immediately into the gel and rooting medium to prevent wilting and maintain the flow of auxins (growth hormones) moving down the stem to initiate root growth. rooting gel for cuttings!

ROOT!T Large Value Propagator is a box for seed germination or rooting cuttings. It consists of:

• lid with two humidity-control vents
• tray with longitudinal channels to prevent overwatering
• dimensions L/W/H: 57 x 37 x 21cm.

ROOT!T VALUE Rooting Sponge Propagation Kit is a complete kit for germinating seeds or rooting cuttings. The kit contains:

• propagator with a humidity-control vent
• tray with 24 cells
• 24 pcs. rooting sponges
• 15 ml sample initial feed
• 15 ml sample rooting gel
• English-language instructions for optimal results
• dimensions L/W/H: 38 x 24 x 18.5 cm.

ROOT!T Propagator Tray Insert is a 60-cell tray for rooting plugs, suitable for placing in a ROOT!T propagator.

• 60 cells
• dimensions: 52x32x5cm

ROOT!T Cutting Mist 100 ml is a cutting spray that prevents losses during the critical first days, when cuttings are most vulnerable. Ideal for softwood and semi-hardwood plants. With this spray, you can treat the mother plant (from which you will take cuttings) 2-3 days in advance, as well as the cuttings themselves during the first three days after they are taken.

• improves rooting
• revitalises stressed, drooping cuttings and brings them back to life
• contains essential vitamin and mineral blends
• prevents dehydration of cuttings
• you can use it with ROOT!T Rooting Gel 150 ml rooting gel, or on its own

Directions for use:

• Spray the mother plant from which you will take cuttings 2-3 days in advance.
• Spray the cuttings during the first 3 days after taking them.

ROOTiT Propagator Tray is a tray / base for the ROOT!T propagator.

• equipped with longitudinal channels to prevent overwatering
• dimensions: 57x37x5.5 cm.

ROOT!T Thermostat for Heat Mat is an electronic device that gives you full control over the temperature in the root zone during germination / rooting. By switching heat mats on and off, the device maintains the precisely set desired temperature (10-30ºC). It is compatible with all ROOT!T heat mats.

• Maintain optimal temperatures for your plants!
• Easy to plug in!
• Easy to use and control!
• Sensor cable length: 1.8 m
• Max. load: 1000 W / 4.3 A

Preparing for use:

1. Place the temperature sensor in the propagator or in the area to be heated. It can be suspended using the rubber suction cup or placed in the substrate (image 3).
2. Place the thermostat outside the propagator or growing area – the thermostat and output socket must always be kept in a dry place! DO NOT IMMERSE IN WATER OR LIQUIDS!
3. Plug the heat mat or other heating device into the output socket.
4. Connect the thermostat to the mains supply – the POWER indicator should light up.
5. Proceed to set the desired temperature to be maintained.

Setting the thermostat:

The display shows the current temperature at the sensor. Press UP to display degrees Fahrenheit ºF or DOWN to display degrees Celsius ºC – the corresponding indicator will light up.

1. Press the SET button to show the desired temperature on the display; after 3 seconds, it will return to the current temperature.
2. Press and hold the SET button for 3 seconds; the display will start flashing. Press UP or DOWN to select the desired temperature to be maintained.
3. Press SET again to return the display to the current temperature; if left untouched, it will return to the current temperature display after 30 seconds.

The HEATING indicator will light up if the current temperature is lower than the desired temperature – the heat mat / heating device is now ON. The HEATING indicator will not light up if the current temperature is higher than the desired temperature – the heat mat / heating device is now OFF.

ROOT!T Medium Heat Mat is a heat mat that evenly warms the root zone, improving germination and rooting. Maintaining a consistent temperature is a key factor for success in the early stages, when young plants are at their most delicate and vulnerable.

• dimensions W/L: 40x60cm.
• Accelerates seed germination or clone rooting by days.
• Warms the root zone 5.5-11˚C above ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T heat mat thermostat.

Instructions for use:

1. Place the heat mat on a thoroughly dry surface.
2. For better results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the propagation tray (seeds, clones) on the mat. Cover it with a propagator lid – this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains power supply (220-240V).
5. This heat mat is designed to warm the root zone 5.5-11˚C above ambient temperature.

Warning:

• Fire or electric shock may result from improper use!
• Ensure that there are no sharp objects on the surface beneath the heat mat that could puncture it! Do not place the mat directly in the tray / propagator and do not cover it with soil or another growing medium!
• Do not cover the mat with thermal insulation materials, as this may cause overheating!
• Do not immerse in water!

ROOTiT Propagator Lid is a lid for a ROOT!T propagator.

• two humidity-control vents
• dimensions: 57x37x15.5cm

ROOT!T Large Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is a key factor for success in the early stages, when young plants are most delicate and vulnerable.

• Dimensions W/L: 40x120cm.
• Accelerates seed germination or rooting of clones by whole days.
• Warms the root zone 5.5-11˚C above ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T heat mat thermostat.

Instructions for use:

1. Place the heat mat on a thoroughly dry surface.
2. For better results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the propagation tray (seeds, clones) on the mat. Cover it with a propagator lid – this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains power supply (220-240V).
5. This heat mat is designed to warm the root zone 5.5–11˚C above the ambient temperature.

Warning:

• Fire or electric shock may result from improper use!
• Make sure there are no sharp objects on the surface beneath the heat mat that could puncture it! Do not place the mat directly in the tray / propagator and do not cover it with soil or another growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

ROOT!T Small Heat Mat is a heating mat, which warms the root zone evenly, improving germination and rooting. Maintaining a constant temperature is a key factor for success in the early stages, when young plants are most delicate and vulnerable.

• W/L dimensions: 25x35cm.
• Speeds up seed germination or the rooting of clones by days.
• Warms the root zone 5.5-11˚C above ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T heat mat thermostat.

Instructions for use:

1. Place the heat mat on a thoroughly dry surface.
2. For better results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the propagation tray (seeds, clones) on the mat. Cover it with a propagator lid – this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains power supply (220-240V).
5. This heat mat is designed to warm the root zone 5.5–11˚C above the ambient temperature.

Warning:

• Fire or electric shock may result from improper use!
• Make sure there are no sharp objects on the surface beneath the heat mat that could puncture it! Do not place the mat directly in the tray / propagator and do not cover it with soil or another growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

ROOT!T rooting and propagation plugs / blocks are designed for seed germination, rooting cuttings / clones or seedlings and are the ideal addition to any standard-size propagator. The dry plugs can be stored for a long time without concern that they may develop mould. Before use, soak them in a solution of ROOT!T First Feed to hydrate them. After allowing them to drain, the moistened plugs are ready for use!

• peat-free
• for seed germination, rooting cuttings / clones or seedlings
• made from natural coconut fibres
• biodegradable
• ​lightweight, easy to store and transport
• number of plugs: 60 plugs
• dimensions: ⌀ 32 x 38 mm

Ensure 100% germination success for seeds and a flying start for your young plants with the ROOT!T Rooting and Seedling Kit (24 cells). The propagator’s deep base with grooved bottom allows tray drainage in case of overwatering, while retaining a small nutrient-solution / water reserve to prevent drying out. The clear lid with a high dome and rotating adjustable ventilation openings regulate humidity and allow you to grow taller plants, which guarantees healthy and strong seedlings. The set contains:

• 1x propagator made of rigid plastic
• 24 ROOTiT rooting and propagation plugs/blocks in a tray
• dimensions L/W/H: 37.5 x 23 x 18 cm

Advantages:

• biodegradable plugs made from natural coconut fibres, peat-free
• for seed germination, rooting cuttings / clones or seedlings
• durable reusable propagator, made from rigid plastic
• the high-dome lid accommodates taller plants
• rotating adjustable ventilation opening
• suitable for long-term use - can be refilled with 24 ROOTiT rooting and propagation plugs/blocks in a tray

Features:

• plug material: coconut fibres
• material of the 24-cell tray: polystyrene
• material of the grooved tray with holes: polypropylene
• lid material: polycarbonate
• plug dimensions: ⌀ 32 mm x 38 mm high
• dimensions of the 24-cell tray: 29.5 x 19 x 4 cm
• propagator dimensions L/W/H: 37.5 x 23 x 18 cm

ROOT!T rooting and propagation plugs / blocks are designed for seed germination, rooting cuttings / clones or seedlings and are the ideal addition to any standard-size propagator. The dry plugs can be stored for a long time without concern that they may develop mould. Before use, soak them in a solution of ROOT!T First Feed to hydrate them. After allowing them to drain, the moistened plugs are ready for use!

• peat-free
• for seed germination, rooting cuttings / clones or seedlings
• made from natural coconut fibres
• biodegradable
• lightweight, easy to store and transport
• durable polystyrene reusable tray, suitable for any standard propagator
• number of plugs: 24 plugs
• plug dimensions: ⌀ 32 mm x 38 mm high
• tray dimensions: 29.5 x 19 x 4 cm

ROOTiT Dry Peat Free 60 Mini Greenhouse Kit with Tray and 60-cell Growing Medium It is a complete plant propagation kit designed for both beginners and experienced gardeners. This kit offers a sustainable and effective solution for growing seedlings from seeds or cuttings.

🔹 Key features:

• Eco-friendly and nature-conscious: Includes 60 peat-free plugs, made from natural coconut fibers – biodegradable and suitable for reusable use.
• Durable design: The propagator is made through injection molding in United Kingdom from company Garland, ensuring durability and stability.
• Control of moisture: The transparent high dome with adjustable ventilation holes allows precise control of moisture, creating optimal conditions for germination and rooting.
• Smart base: The deep base with ribbed bottom allows drainage of excess water, as while retains small quantity nutrient solution, preventing drying of stages.

🔹 Technical specifications:

• Materials:
  • Plugs: Coconut fibers and natural polymer
  • Tray with cells: Polystyrene
  • Base of of the propagator: Polypropylene
  • Lid of of the propagator: Polycarbonate
• Dimensions:
  • Plugs: Ø32 mm x 38 mm height
  • Tray with cells: 52 cm x 30 cm x 4 cm
  • Propagator (with lid): 58 cm x 40.5 cm x 22.5 cm

🔹 Use:

• For seeds: Place seed in along-wide upper part of opening of plug and it cover with small piece from outer edge of plug, for to block the light. Maintain temperature between 18°C and 26°C and high humidity up to germination.
• For cuttings: Fill opening of plug with ROOT!T Rooting Gel (without hormones), after which place cutting in along-deep part of opening. Maintain temperature approximately 22°C and high humidity up to rooting.

✅ Advantages:

• Sustainability: Peat-free plugs from coconut fibers are eco-friendly clean and biodegradable.
• Reusable use: The tray with cells and the propagator are designed for long-lasting use and can to be refillable with new plugs.
• Flexibility: Suitable for different species plants and methods of propagation.
• Easy use: Ideal as well as for beginners, so and for experienced gardeners.

ROOT!T Dry Peat Free 60 Cell Filled Tray is a professional plant propagation tray containing 60 dry peat-free cubes made from natural coconut fibres and natural polymer. It is suitable both for seed germination and rooting cuttings. The cubes are lightweight, resistant to mould growth during storage and, once moistened, provide an ideal environment for developing a strong root system.

ROOT!T Dry Peat Free 60 Cell Filled Tray is designed for gardeners and professional growers seeking an environmentally friendly alternative to traditional peat pellets. The set includes 60 dry cubes, activated by soaking them in water or nutrient solution and ready for use once fully hydrated.

The cubes are made from coconut fibres and natural polymer, which gives them an excellent balance between moisture retention and oxygen access for young roots. Thanks to the octagonal cells in the tray, a small air gap forms around each cube, encouraging natural air pruning of the roots. This results in a denser, healthier root system and significantly faster establishment after transplanting.

Each cube has a specially shaped two-stage hole. The upper, wider part is intended for placing seeds, while the lower, narrower and deeper part is ideal for placing cuttings with ROOT!T Rooting Gel. This makes the product versatile for both seed propagation and plant cloning.

After transplanting, the cubes break down naturally in the substrate without hindering root development. The polystyrene tray itself is exceptionally sturdy and can be reused many times with new ROOT!T Dry Peat Free Refill cubes.

Technical specifications

✔️ Manufacturer: ROOT!T

✔️ Type: Germination and rooting tray

✔️ Number of cells: 60

✔️ Number of cubes: 60 pcs.

✔️ Cube material: Coconut fibres and natural polymer

✔️ Tray material: Polystyrene

✔️ Cube dimensions: Ø32 × 38 mm

✔️ Tray dimensions: 52 × 30 × 4 cm

✔️ Peat-free

✔️ Biodegradable cubes

✔️ Suitable for repeated use (tray)

📦 The kit includes

✔️ 1 × Tray with 60 cells

✔️ 60 × ROOT!T Dry Peat Free cubes for germination and rooting.

🔧 Use

Suitable for:

• Seed germination

• Rooting cuttings

• Vegetable seedlings

• Flowers

• Herbs

• Chilli peppers

• Tomatoes

• Microgreens

• Home and professional greenhouses

• Mini greenhouses and propagators.

📋 Instructions for use

1. Place the tray in a mini greenhouse or suitable container.
2. Moisten the cubes with water or ROOT!T First Feed solution (5 ml per 1 litre of water) and leave them to hydrate fully, preferably overnight.
3. For seeds – place the seed in the upper hole and cover lightly with a small amount of material from the cube.
4. For cuttings – add ROOT!T Rooting Gel to the hole and place the cutting in the deeper part.
5. Maintain a temperature of 18–22°C for seeds or around 22°C for cuttings, as well as high humidity in the mini greenhouse.
6. Once a well-developed root system has formed, transplant the cubes directly into a pot or substrate.

💡 Tip from Urban Botaniks: For the highest germination rate, combine the tray with ROOT!T First Feed, ROOT!T Rooting Gel and a heated ROOT!T propagator. This will provide optimal humidity, temperature and a nutrient medium for fast germination and strong rooting.