Milwaukee Calibration and Storage Fluids

Milwaukee pH 7.01 20ml buffer solution / calibration liquid for pH measuring instruments.

• Accuracy: ±0.01 pH
• value: 7.01 pH at 25°C
• volume: 20 ml
• single-use

Milwaukee pH 4.01 20ml buffered solution / calibration liquid for pH meters.

• Accuracy: ±0.01 pH
• value: 4.01 pH at 25°C
• volume: 20 ml
• single-use

Milwaukee 1413 µS/cm Conductivity Calibration Solution 20ml is a buffered solution/calibration liquid for instruments measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 1413 µS/cm at 25°C\n
• volume: 20 ml
• single-use

Extend the life of your pH meter, sensor, probe or ORP electrode with Milwaukee MA9015 Storage Solution for pH / ORP Electrodes 230ml!

To obtain fast and accurate measurements of the pH and redox potential of your solutions, you must not let your sensor dry out! Proper storage of your pH sensor in solution keeps the glass membrane well hydrated, which supports correct operation and ensures accurate readings.

• storage solution
• volume: 230ml

Milwaukee Electrode Rinse Solution 20ml is ideal for rinsing your electrode between immersion in different calibration fluids, thereby preventing them from mixing. This rinse solution is also ideal for removing accumulated deposits on the probe or cap caused by evaporation of the storage solution. Although the buildup of these deposits is normal, they must always be removed before measurement or calibration!

• Does not replace cleaning or storage solutions!
• Extends the life of your electrode!
• single-use

Milwaukee pH 10.01 20ml buffered solution / calibration liquid for pH meters.

• Accuracy: ±0.01 pH
• Value: 10.01 pH at 25°C
• volume: 20 ml
• single-use

Milwaukee 12880 µS/cm Conductivity Calibration Solution 20ml is a buffered solution / calibration liquid for instruments measuring electrical conductivity (EC).

• accuracy: ±0.01 EC
• value: 12880 µS/cm at 25°C
• volume: 20 ml
• single-use

Milwaukee MA9016 Cleaning Solution for pH / ORP Electrodes 230ml is specially designed to improve and extend the life of the pH sensors and ORP electrodes in your instruments! The accuracy and speed of measurements depend on whether the tip of the pH sensor or the ORP electrode is clean!

• electrode cleaning solution
• volume: 230 ml

Directions for use:

1. Open the bottle and fill a cup or container so that the level covers the sensor and electrode.
2. Soak for 15 to 20 minutes!
3. Soak in MA9015 storage solution for at least 2 hours!

Milwaukee pH 7.01 230 ml buffered solution / liquid for calibrating pH measuring instruments. Calibrating your pH meter is a simple procedure for optimum performance and should be carried out whenever your instrument's readings appear questionable. Calibration should be carried out at least once a month! 

• accuracy: ±0.01 pH
• value: 7.01 pH at 25°C
• volume: 230 ml

Milwaukee calibration liquids are designed to help you achieve reliable and repeatable pH measurements while extending the life of your instrument.

Milwaukee pH 4.01 230 ml buffered solution / liquid for calibrating pH meters. Calibrating your pH meter is a simple procedure for optimum performance and should be performed whenever your meter's readings appear questionable. Calibration should be carried out at least once a month!

• accuracy: ±0.01 pH
• value: 4.01 pH at 25°C
• volume: 230 ml

Milwaukee calibration liquids are designed to help you achieve reliable and repeatable pH measurements while extending the life of your instrument.

Milwaukee MA9069 5000 µS/cm Conductivity Solution 230ml is a buffered solution / calibration liquid for electrical conductivity (EC) meters.

• accuracy: ±0.01 EC
• value: 5000 µS/cm at 25°C
• volume: 230 ml
• for repeated calibration