VENTS, inline fans

VENTS TT PRO 200, 1040 m³/h fan

VENTS TT PRO 200 1040m³/h is a high-performance centrifugal fan that can be used for supply or exhaust ventilation in rooms requiring increased pressure, powerful airflow and low noise levels. It is the ideal solution for ventilating bathrooms, kitchens and other humid rooms, as well as apartments, villas, shops, cafés, etc.

• housing made of high-quality, durable plastic
• single-phase, two-speed motor with low energy consumption
• thermal protection against overheating to prevent motor overload
• its motor's ball bearings guarantee a lifespan of 40,000 operating hours with continuous use
• equipped with clamps, allowing it to be removed for cleaning or changing the airflow direction without needing to dismantle it

Technical specifications:

• inner diameter: ⌀ 200mm
• current: 230V, 50/60Hz
• min. / max. power: 76W / 108W
• min. / max. amperage: 0.34A / 0.48A
• min. / max. airflow: 830m³/h / 1040m³/h
• min. / max. RPM: 1915 / 2380
• min. / max. noise level: 45dB / 52dB
• protection: IPX4
• dimensions W/H/D: 239 x 261 x 295.5mm
• weight: 3.95 kg
• 1-year warranty
   

Note: The fan does not come with a power cable!

VENTS VK 125, 355 m³/h fan

The VENTS VK 125 355m³/h centrifugal fan can be used as a supply or exhaust fan in the ventilation system of commercial, office and other spaces. Its durable, corrosion-resistant plastic housing makes it an ideal solution for installation in damp spaces such as bathrooms, kitchens, etc.

• housing made of high-quality, durable plastic
• single-phase motor with an external rotor and self-resetting protection against overheating
• motor equipped with ball bearings for a long service life, of at least 40,000 operating hours

Technical specifications:

• internal diameter: ⌀ 125mm
• voltage: 230V, 50/60Hz
• power: 79W
• current: 0.34A
• max. airflow: 355m³/h
• rpm: 2800
• noise level: 40dB
• protection: IPX4, IP44
• weight: 2.2kg
• 1-year warranty

Note: The fan does not include a power cable!

VENTS TT 150, fan 405/520 m³/h

VENTS TT 150 (405/520m³/h) is a centrifugal fan that can be used for supply or exhaust ventilation in small spaces such as bathrooms, kitchens, small shops, etc.

• housing made of high-quality, durable plastic
• single-phase, two-speed motor
• thermal protection against overheating
• equipped with clamps that allow it to be removed for cleaning or to reverse the airflow direction without needing to dismantle it

Technical specifications:

• inner diameter: ⌀ 150mm
• voltage: 230V, 50/60Hz
• min. / max. power: 29W / 60W
• min. / max. current: 0.17A / 0.27A
• min. / max. airflow: 405m³/h / 520m³/h
• min. / max. RPM: 1680 / 2460
• min. / max. noise level: 33dB / 44dB
• protection rating: IPX4
• dimensions W/H/L: 223 x 250 x 295mm
• weight: 2.65
• kg
• 1-year warranty

Note: the fan does not include a power cord!

VENTS TT PRO 150, 565 m³/h fan

VENTS TT PRO 150 565m³/h is a high-performance turbine fan that can be used for supply or exhaust ventilation in spaces requiring increased pressure, powerful airflow and low noise levels. It is the best solution for ventilating bathrooms, kitchens and other damp spaces, as well as apartments, villas, shops, cafés and more.

• housing made of high-quality, durable plastic
• single-phase, two-speed motor with low energy consumption
• thermal protection against overheating to prevent motor overload
• its motor's ball bearings guarantee a 40,000-hour service life with continuous use
• equipped with clamps that allow it to be removed for cleaning or changing the direction of airflow, without needing to be dismantled

Technical specifications:

• inner diameter: ⌀ 150mm
• voltage: 230V, 50/60Hz
• min. / max. power: 42W / 50W
• min. / max. amperage: 0.19A / 0.22A
• min. / max. airflow: 415m³/h / 565m³/h
• min. / max. RPM: 1940 / 2620
• min. / max. noise level: 37dB / 46dB
• protection: IPX4
• dimensions W/H/D: 220.1 x 247 x 289mm
• weight: 2.3kg
• 1-year warranty
   

Note: the fan comes without a power cable!

VENTS TT Silent-M 200, 1020 m³/h fan

VENTS TT Silent-M 200 1020m³/h is a centrifugal fan with a specially designed sound-insulated housing that ensures quiet operation with high aerodynamic performance. Fans in the Silent-M series are ideal for use in the ventilation systems of various commercial and industrial premises with high noise-level requirements, such as libraries, conference rooms, educational institutions, kindergartens, and more.

• specially designed outer housing made of polymer-coated steel
• the interior is covered with a 5mm layer of special thermal and sound-insulating wool
• the interior of the housing and the impeller are made of high-quality, durable plastic
• powerful airflow and high pressure
• single-phase, two-speed motor with low energy consumption
• motor equipped with ball bearings for a long service life of at least 40,000 operating hours

Technical specifications:

• inner diameter: ⌀ 200mm
• current: 230V, 50/60Hz
• min. / max. power: 78W / 110W
• min. / max. amperage: 0.35A / 0.49A
• min. / max. airflow: 810m³/h / 1020m³/h
• min. / max. rpm: 2015 / 2445
• min. / max. noise level: 31dB / 36dB
• protection: IPX4
• dimensions W/H/D:  x  x mm
• weight: 8.0 kg
• 1-year warranty
   

Note: The fan does not include a power cable!

VENTS VK 200, fan 780 m³/h

The VENTS VK 200 780m³/h centrifugal fan can be used as a supply or exhaust fan in the ventilation system of commercial, office and other spaces. Its durable, corrosion-resistant plastic housing makes it the ideal solution for installation in humid spaces such as bathrooms, kitchens, etc.

• housing made of high-quality, durable plastic
• single-phase external rotor motor with self-resetting protection against overheating
• motor equipped with ball bearings for a long service life of at least 40,000 operating hours

Technical specifications:

• inner diameter: ⌀ 200mm
• voltage: 230V, 50/60Hz
• power: 107W
• current: 0.47A
• max. airflow: 780m³/h
• rpm: 2660
• noise level: 46dB
• protection rating: IPX4, IP44
• weight: 3.0kg
• 1-year warranty

Note: the fan does not include a power cable!

VENTS VK 150, fan 460 m³/h

The VENTS VK 150 460m³/h centrifugal fan can be used as a supply or exhaust fan in the ventilation system of commercial, office and other premises. Its durable, corrosion-resistant plastic housing makes it an ideal choice for installation in humid rooms such as bathrooms, kitchens, and more.

• housing made of high-quality, durable plastic
• single-phase motor with external rotor and self-resetting protection against overheating
• motor equipped with ball bearings for a long service life of at least 40,000 operating hours

Technical specifications:

• internal diameter: ⌀ 150mm
• voltage: 230V, 50/60Hz
• power: 80W
• current: 0.35A
• max. airflow: 460m³/h
• rpm: 2725
• noise level: 42dB
• protection rating: IPX4, IP44
• weight: 2.45kg
• 1-year warranty

Note: the fan does not include a power cable!

VENTS Stream 150/160, fan 540 m³/h

"Vents Stream 150/160" is a high-performance ventilation system designed to improve air quality in residential and commercial spaces.

Technical specifications:

• motor: AC (brushed)
• housing: plastic
• internal thermal and sound insulation layer: 50 mm acoustic wool
• max. current: 230V, 50Hz
• max. airflow: 540m³/h
• diameter: ⌀ 150 / 160 mm 
• 1st speed: 25W, 0.20A, 1982 rpm, 242m³/h, 20dB
• 2nd speed: 46W, 0.21A, 2374 rpm, 320m³/h, 26dB
• 3rd speed: 51W, 0.24A, 2738 rpm, 540m³/h, 33dB
• transported air temperature (max.): 55°С
• transported air temperature (min.): -25°С
• protection: IPX4
• motor protection: IP20
• warranty: 1 year

VENTS Boost-I 200, fan 1110 m³/h

Vents Boost-I 200 is a powerful centrifugal fan with a specially designed sound-insulated housing, ensuring quiet operation with high aerodynamic performance. These features make it extremely suitable for use in ventilation systems in various commercial and industrial premises with stringent noise-level requirements. 

• max. capacity: 1110 m³/h
• suitable for: libraries, conference rooms, educational institutions, kindergartens , and more.
• sound-insulated housing made of galvanized steel
• thermal and sound insulation provided by special 30 mm acoustic foam
• a combination of high airflow, increased pressure, and low noise
• low energy consumption

Note:

1. The fan is sold without a power cable! You can purchase one here*.
2. The fan has no speed switch. Set your desired speed manually when connecting the power cable!

Features of the VENTS Boost-I 200:

• Application: The VENTS Boost-I 200 inline (duct) fans are enclosed in a specially designed sound-insulated housing, ensuring quiet operation while providing high aerodynamic performance. The fan is compatible with round ⌀ 200 mm ducts. The VENTS Boost-I 200 combines the wide capabilities and high performance of axial and centrifugal fans, providing a powerful airflow and high pressure. The VENTS Boost-I 200 is recommended for ventilation systems in various commercial and industrial premises where noise levels are a key concern, such as libraries, conference rooms, educational institutions, kindergartens, and more.
• Design: The outer housing is made of galvanized steel. Thermal and sound insulation is provided by 30 mm acoustic foam. Thanks to the improved mixed-flow impeller, a hybrid of axial and centrifugal impellers, Boost-I has low energy consumption, low noise and high performance. The specially designed diffuser, impeller and airflow straightener at the fan outlet ensure smooth airflow distribution and provide the best combination of high airflow, increased pressure and low noise. The fan housing is equipped with a sealed terminal box for connection to the mains.
• Motor: single-phase, high-efficiency, three-speed asynchronous motor with low energy consumption. The motor is equipped with thermal switches for overheat protection. Ball bearings ensure a long service life (approximately 40,000 hours of continuous operation). The motor's ingress protection rating is IPX4.
• Speed control: The fan has no speed switch; the desired speed is set manually when the power cable is first connected.
• Installation: The fan is designed for use with round air ducts. The fan housing has mounting brackets for convenient ceiling installation. The ducts can be installed at any angle relative to the fan axis. Ensure sufficient access for maintenance when installing the fan. Electrical connection and installation must be carried out in accordance with the operating manual and the wiring diagram supplied with the terminal box. A ventilation system can have several fans installed in parallel to increase output capacity or in series to increase operating pressure.

Technical specifications:

• motor: AC (brushed)
• housing: galvanized steel
• inner thermal and sound insulation layer: 30 mm acoustic foam
• max. current: 230V, 50Hz
• max. airflow: 1140m³/h
• diameter: ⌀ 200mm
• 1^st speed: 82W, 0.37A, 2229 rpm, 692m³/h, 37dB
• 2^nd speed: 104W, 0.46A, 2634 rpm, 906m³/h, 42dB
• 3^rd speed: 113W, 0.51A, 2823 rpm, 1110m³/h, 44dB
• transported air temperature (max):  55°С
• transported air temperature (min): -25°С
• protection: IPX4
• motor protection: IP20
• warranty: 1 year

VENTS NK 250-9,0-3 U, 9 kW duct heater VENTS NK 250-9,0-3U is a powerful industrial heater designed for efficient heating of large spaces. With its power and reliability, this unit is ideal for use in warehouses, workshops, and other commercial environments. Electric heaters are available with various operating modes and control systems. The product comes with a built-in temperature regulator and features a galvanized steel housing and a connection box. The heating elements are made of stainless steel, and the product is equipped with a rubber seal. Power consumption: 13A Diameter: 250 mm Phases: 3 Voltage: 400V Shape: round Heating type: Electric Airflow: 660m3/h Installation method: Duct Power: 9000W

VENTS TT Silent-M 150, 555 m³/h fan

VENTS TT Silent-M 150 555 m³/h is a centrifugal fan with a specially designed sound-insulated housing that ensures quiet operation with high aerodynamic performance. Fans in the Silent-M series are ideal for ventilation systems in various commercial and industrial spaces with strict noise-level requirements, such as libraries, conference rooms, educational institutions, kindergartens, and more.

• specially designed polymer-steel outer housing
• the interior is lined with a 5 mm layer of special thermal- and sound-insulating wool
• the inside of the housing and the impeller are made of high-quality, durable plastic
• powerful airflow and high pressure
• single-phase, two-speed motor with low energy consumption
• motor equipped with ball bearings for a long service life of at least 40,000 operating hours

Technical specifications:

• inner diameter: ⌀ 150 mm
• voltage: 230 V, 50/60 Hz
• min. / max. power: 45W / 52W
• min. / max. amperage: 0.2 A / 0.23 A
• min. / max. airflow: 405 m³/h / 555 m³/h
• min. / max. RPM: 1970 / 2645
• min. / max. noise level: 26 dB / 33 dB
• protection: IPX4
• dimensions W/H/D:  x  x mm
• weight: 6.1 kg
• 1-year warranty
   

Note: the fan does not include a power cable!

VENTS VK 315, fan 1340 m³/h

The VENTS VK 315 1340m³/h centrifugal fan can be used as a supply or exhaust fan in the ventilation system of commercial, office and other premises. Its durable, corrosion-resistant plastic housing makes it an ideal solution for installation in humid rooms such as bathrooms, kitchens, and more.

• housing made of high-quality, durable plastic
• single-phase motor with external rotor and self-resetting protection against overheating
• motor equipped with ball bearings for a long service life of at least 40,000 operating hours

Technical specifications:

• inner diameter: ⌀ 315mm
• voltage: 230V, 50/60Hz
• power: 200W
• current: 0.88A
• max. airflow: 1340m³/h
• rpm: 2655
• noise level: 48dB
• protection: IPX4, IP44
• weight: 4.85kg
• 1-year warranty

Note: the fan does not include a power cable!

VENTS Boost-I 250, fan, 1670 m³/h

Vents Boost-I 250 is a powerful centrifugal fan with a specially designed sound-insulated housing, ensuring quiet operation with high aerodynamic performance. These features make it ideal for use in the ventilation systems of various commercial and industrial premises with high noise-level requirements. 

• max. capacity: 1670 m³/h
• suitable for: libraries, conference rooms, educational institutions, kindergartens, etc.
• sound-insulated housing made of galvanized steel
• thermal and sound insulation, provided by special 30 mm acoustic foam
• a combination of high airflow, increased pressure and low noise
• low energy consumption

Note:

1. The fan is sold without a power cable! You can purchase one here*.
2. The fan has no speed switch; set your desired speed manually when connecting the power cable!

Features of the VENTS Boost-I 250:

• Application: The VENTS Boost-I 250 inline duct fans are housed in a specially designed sound-insulated casing, which ensures quiet operation combined with high aerodynamic performance. The fan is compatible with round ⌀ 250 mm air ducts. The VENTS Boost-I 250 combines the broad capabilities and high performance of axial and centrifugal fans, providing powerful airflow and high pressure. The VENTS Boost-I 250 is recommended for ventilation systems in various commercial and industrial premises with strict noise-level requirements, such as libraries, conference rooms, educational institutions, kindergartens, etc.
• Design: The outer casing is made of galvanized steel. Thermal and sound insulation is provided by 30 mm acoustic foam. Thanks to the improved mixed-flow impeller, a hybrid of axial and centrifugal impellers, the Boost-I has low energy consumption, low noise and high performance. The specially designed diffuser, impeller and airflow straightener at the fan outlet ensure smooth airflow distribution and provide the best combination of high airflow, increased pressure and low noise. The fan casing is equipped with a sealed terminal box for connection to the mains.
• Motor: single-phase, high-efficiency, three-speed asynchronous motor with low energy consumption. The motor is equipped with thermal switches for overheating protection. Ball bearings ensure a long service life (approximately 40,000 hours of continuous operation). The motor's ingress protection rating is IPX4.
• Speed control: The fan has no speed switch; the desired speed is set manually when initially connecting the power cable.
• Installation: The fan is designed for use with round air ducts. The fan housing has mounting brackets for convenient ceiling installation. The ducts can be installed at any angle relative to the fan axis. Ensure sufficient access for maintenance when installing the fan. Electrical connection and installation must be carried out in accordance with the operating instructions and the wiring diagram included in the terminal box. A ventilation system can have several fans installed in parallel to increase output capacity or in series to increase operating pressure.

Technical specifications:

• motor: AC (brushed)
• housing: galvanized steel
• inner layer for thermal and sound insulation: 30 mm acoustic foam
• max. current: 230V, 50Hz
• max. airflow: 1670m³/h
• diameter: ⌀ 250mm
• 1^st speed: 144W, 0.70A, 2292 rpm, 1007m³/h, 38dB
• 2^nd speed: 173W, 0.81A, 2626 rpm, 1404m³/h, 43dB
• 3^rd speed: 188W, 0.84A, 2876 rpm, 1670m³/h, 45dB
• conveyed air temperature (max): 55°C
• conveyed air temperature (min): -25°C
• protection: IPX4
• motor protection: IP20
• warranty: 1 year

VENTS P3-1-300 is a series of wall-mounted switches for controlling multi-speed fans with a 230 V single-phase power supply. The series mainly includes the P3-1-300 for three-speed fans. Control is step-based – the user selects one of the pre-set motor speeds rather than adjusting the speed smoothly.

P3-1-300 is not a smooth speed controller. It is designed specifically for fans that come from the factory with three separate motor speeds. Through the rotary switch, the user selects low or high speed or turns the fan off completely.

This makes it suitable for a number of two-speed VENTS fans, including models from the TT series, where the manufacturer lists it as an external accessory for controlling the two-speed motor.

Technical Specifications

• Manufacturer: VENTS
• Model: P3-1-300
• Type: Two-stage speed switch
• Modes: OFF / 1 / 2 / 3
• Speed 1: Low
• Speed 2: Medium
• Speed 3: High
• Power supply: 230 V
• Frequency: 50/60 Hz
• Maximum power: 600 W
• Maximum current: 3 A
• Load type: Resistive / Inductive
• Dimensions: up to 88 × 88 × 51 mm
• Protection class: IP40 on the front side
• Operating temperature: -10 to +40°C
• Permissible relative humidity: up to 80%
• Installation: Wall-mounted, in a mounting box.
• Manufacturer's manual "P3-1-300" user's manual 08-2019 (V23EN-02)

Operating mode

Control is as simple as possible:

OFF – fan is off

1. - low speed
2. - medium speed
3. - high speed

P3-1-300 switches between the pre-set speed leads of the motor. Therefore, it must be used only with a fan whose motor is designed for three-speed operation.

Compatibility

P3-1-300 is designed for three-speed fans.

It is important that the specific fan has separate electrical leads for low, medium, and high speed. If the motor is single-speed and allows adjustment by changing the voltage, another type of controller is required, for example from the RS-1 series.

Installation and protection

P3-1-300 is designed for indoor wall mounting in a suitable mounting box. The manufacturer expressly warns against:

• direct water spraying;
• rain;
• direct sunlight;
• installation directly next to heating appliances and other heat sources. Electrical connection must be carried out with the power supply switched off and by a qualified person.

📦 Contents

The standard set includes:

1 × VENTS P3-1-300
1 × user manual
1 × packaging.

Main advantages

✔️ Control of 3 speeds
✔️ Clear modes OFF / 1 / 2 / 3
✔️ Power supply 230 V / 50–60 Hz
✔️ Up to 600 W / 3 A according to the manufacturer's manual
✔️ Suitable for inductive loads
✔️ Compact dimensions 88 × 88 × 51 mm
✔️ Protection class IP40
✔️ Suitable for a number of two-speed VENTS fans
✔️ Simple and reliable step control.

VENTS OVK 4E 400 is a professional axial fan with a circular mounting plate, designed for supply and exhaust ventilation systems requiring a high air flow rate and relatively low system resistance. The model features a diameter of Ø400 mm, a maximum air flow of 3580 m³/h, a power output of 180 W, and a single-phase power supply of 230 V / 50 Hz. It is suitable for wall mounting in industrial, technical, warehouse, greenhouse, and other ventilation applications.

OVK 4E 400 is part of the VENTS OVK series of low-pressure industrial axial fans. The circular mounting plate design allows for direct installation into a suitable wall opening, and the fan can operate for both exhaust and supply air.

The model utilizes a 4-pole single-phase asynchronous motor with built-in thermal overheating protection and ball bearings. The manufacturer specifies a service life for the bearings of up to approximately 40,000 hours of continuous operation. The speed can be controlled using a suitable external controller, which is purchased separately.

Technical Specifications

• Manufacturer: VENTS
• Series: OVK
• Model: OVK 4E 400
• Type: Industrial axial fan
• Mounting plate: Circular
• Diameter: Ø400 mm
• Power supply: 230 V / 50 Hz
• Phases: 1
• Power: 180 W
• Current consumption: 0.82 A
• Maximum air flow: 3580 m³/h
• Rotational speed: 1380 rpm
• Sound pressure level at 3 m: 53 dBA
• Ingress protection: IP24
• Temperature of transported air: -30 to +60°C
• Weight: approx. 8.5 kg
• Motor type: Single-phase asynchronous
• Number of poles: 4
• Overheating protection: Yes
• Bearings: Ball
• Speed control: Possible with an external regulator.

Dimensions

Air Flow

Up to 3580 m³/h at 50 Hz

This makes the OVK 4E 400 suitable for applications where a large volume of air is required at relatively low static pressure. This is where the axial fan performs best – for free discharge through a wall, large openings, or short, low-resistance air ducts.

🔊 Noise

Sound pressure level: 53 dBA at 3 m

This is a high-flow industrial fan, so it is not designed for applications where low noise is the primary priority. For installation in sensitive environments, suitable sound insulation or distancing from the working area may be provided.

Operating Temperature Range

The model can transport air with a temperature of approximately:

-30°C to +60°C

This makes it suitable for a wide range of technical and industrial conditions.

Motor and Reliability

The OVK 4E 400 uses a 4-pole asynchronous electric motor with:

• built-in thermal protection;
• ball bearings;
• an approximate service life of up to 40,000 hours;
• speed control capability via a compatible controller.

Suitable for

The VENTS OVK 4E 400 can be used for:

• industrial ventilation;
• warehouses and production facilities;
• technical rooms;
• greenhouses and grow spaces;
• garages and workshops;
• direct air discharge through an external wall;
• supply ventilation systems;
• systems requiring high flow and low resistance.

Installation

The fan is designed for wall mounting and can be positioned on the inside or outside of the wall, depending on the project. The circular mounting plate features pre-drilled holes for fastening.

Since this is an axial fan, for optimal performance, it is best to keep the airflow path before and after the fan as clear as possible.

Speed Control

Speed can be managed via a suitable:

stepped or stepless speed regulator.

The regulator is not a standard part of the kit and must be selected separately according to the motor's electrical parameters.

Key Advantages

✔️ High air flow – up to 3580 m³/h
✔️ Large operating diameter – Ø400 mm
✔️ Only 180 W nominal power
✔️ Single-phase 230 V power supply
✔️ 4-pole asynchronous motor
✔️ Built-in overheating protection
✔️ Long-life ball bearings
✔️ Operating range -30 to +60°C
✔️ Speed control capability
✔️ Compact depth of 220 mm
✔️ Suitable for supply and exhaust ventilation.

VENTS VKOM 315, axial fan

Low-pressure axial fan from Vents' VKOM series, with a steel housing and the option of recessed installation / duct mounting directly in the ventilation system. The fan has a single-phase asynchronous motor with built-in thermal overload protection and automatic restart.

• for use in commercial, office and other public or industrial premises
• application: combined (exhaust and supply) ventilation system for various premises where high airflow is required at relatively low system resistance
• The fan is powered via the remote terminal box. Power supply and installation must be carried out in accordance with the instructions and the terminal box wiring diagram.
• diameter: ⌀ 315 mm
• max. airflow: 1700 m³/h

• Suitable for use in commercial, office and other public or industrial premises.
• Application: combined (exhaust and supply) ventilation system for various premises where high airflow is required at relatively low system resistance.
• Motor: The single-phase asynchronous motor is equipped with thermal overload protection with automatic restart. The motor is equipped with plain bearings. Motor protection rating IP44.
• Speed adjustment: stepwise speed adjustment using an external autotransformer (sold separately).
• Installation: can be wall-mounted or installed in a duct; (fixing brackets included).
• Power supply: the fan is powered via the remote terminal box. The power supply and installation must be carried out in accordance with the terminal box manual and wiring diagram.

Technical specifications:

• phases: 1
• voltage: 230 V
• frequency: 50 Hz
• power: 110 W
• current: 0.75 A
• max. airflow: 1700 m³/h
• revolutions per minute: 1300 rpm
• noise level at a distance of 3 m: 42 dBA
• min. temperature of air being handled: - 30°C
• max. temperature of air being handled: + 40°C
• protection rating: dust- and splash-resistant (IPX4, IP44)
• blade material: aluminum
• housing material: steel

Overall fan dimensions (see photo no. 3):

• B: 337 mm
• diameter D: ⌀ 315 mm
• length L: 278 mm
• L1: 55 mm
• L3: 40 mm
• weight: 4.9 kg

VENTS NK 125-2,4-1 U, 2.4 kW duct heater

Electric duct heater with a temperature regulator or control unit.

VENTS VKOM 200, axial fan

Vents VKOM series low-pressure axial fan, with a steel housing and the option of recessed / duct mounting directly in the ventilation system. The fan has a single-phase induction motor with built-in thermal overload protection and automatic restart.

• for use in commercial, office and other public or industrial spaces
• application: combined (exhaust and supply) ventilation system for various spaces where high airflow is required with relatively low system resistance
• The fan is powered via the remote terminal box. Power supply and installation must be carried out in accordance with the manual and the terminal box wiring diagram.
• diameter: ⌀ 208 mm
• max. airflow: 390 m³/h

• Suitable for use in commercial, office and other public or industrial spaces.
• Application: combined (exhaust and supply) ventilation system for various spaces where high airflow is required with relatively low system resistance.
• Motor: the single-phase induction motor is equipped with thermal overload protection with automatic restart. The motor is equipped with sleeve bearings. Motor protection rating IP44.
• Speed control: step speed control with an external autotransformer (sold separately).
• Installation: can be wall-mounted or recessed (duct-mounted); (mounting brackets included).
• Power supply: the fan is powered via the remote terminal box. The power supply and installation must be carried out in accordance with the instructions and wiring diagram for the terminal box.

Technical specifications:

• phases: 1
• voltage: 230 V
• frequency: 50 Hz
• power: 33 W
• current: 0.23 A
• max. airflow: 390 m³/h
• rotational speed: 1410 rpm
• noise levels at a distance of 3 m: 33 dBA
• min. air temperature: - 30°C
• max. air temperature: + 40°C
• protection rating: resistant to dust and water splashes (IPX4, IP44)
• impeller material: aluminum
• housing material: steel

Overall fan dimensions (see image no. 3):

• B: 228 mm
• diameter D: ⌀ 208 mm
• length L: 220 mm
• L1: 40 mm
• L3: 30 mm
• weight: 2.4 kg

VENTS Boost 200, fan 1140 m³/h

Vents Boost 200 is an innovative inline fan that can be used in ventilation systems requiring a powerful airflow: commercial, office and other public or industrial premises, as well as rooms with high humidity. The fan is equipped with a three-speed* brush motor, which ensures smooth airflow distribution and provides the best combination of powerful airflow, increased pressure and low noise.

• housing: plastic
• max. airflow: 1140m³/h
• diameter: ⌀ 200mm
• 1^st speed: 82W, 0.37A, 752m³/h
• 2^nd speed: 101W, 0.45A, 978m³/h
• 3^rd speed: 113W, 0.51A, 1140m³/h

Note: The fan has no speed switch; your desired speed is set manually when connecting the power cable.

VENTS Boost series turbine fans:

• Application. Designed for supply or exhaust ventilation systems requiring powerful airflow: commercial, office, and other public or industrial premises, as well as rooms with high humidity.
• Design. The housing is made of polymer. Thanks to the conical polymer impeller with specially profiled blades, the circumferential velocity of the airflow increases, resulting in higher airflow and pressure compared with the performance of standard axial fans. The specially designed diffuser, impeller, and airflow straightener at the fan outlet ensure smooth airflow distribution and enable the best combination of high airflow, increased pressure, and low noise. The fan housing is equipped with a sealed terminal box for connection to the mains.
• Motor. VENTS Boost fans are equipped with single-phase, high-efficiency, three-speed asynchronous motors with low power consumption. The motor is equipped with thermal switches for overheat protection. Ball bearings ensure a long service life (approximately 40,000 hours of continuous operation). The motor's ingress protection rating is IPX4.
• Speed control. The fan has no speed switch; the desired speed is set manually when the power cable is first connected.
• Installation. The fans can be installed anywhere and at any angle in the duct system. Several fans can be installed in one system in parallel to achieve higher airflow or in series to increase the operating pressure in the system. The fan housing is equipped with mounting brackets for the floor, wall, or ceiling. 

Full technical specifications: here*

Technical specifications:

• motor: AC (brushed)
• housing: plastic
• max. current: 230V, 50Hz
• max. airflow: 1140m³/h
• diameter: ⌀ 200mm
• 1^st speed: 82W, 0.37A, 1866 rpm, 752m³/h, 39dB
• 2^nd speed: 101W, 0.45A, 2400 rpm, 978m³/h, 46dB
• 3^rd speed: 113W, 0.51A, 2738 rpm, 1140m³/h, 50dB
• conveyed air temperature (max):  55°C
• conveyed air temperature (min): -25°C

VENTS OV1 250, axial fan

Vents OV1 series axial fans are designed to move large volumes of air at low pressure, and can be mounted on a wall or panel. They are used to ventilate commercial, office and other public or industrial premises. The fan has a single-phase asynchronous motor with built-in thermal overload protection with automatic restart.

• for wall or panel mounting
• with a steel housing and aluminum blades 
• application: combined (exhaust and supply) ventilation system for various rooms where high airflow is required with relatively low system resistance
• diameter: ⌀ 262 mm
• max. airflow: 1070 m³/h

• Suitable for use in commercial, office and other public or industrial premises.
• Application: combined (exhaust and supply) ventilation system for various rooms where high airflow is required with relatively low system resistance.
• Motor: the single-phase induction motor is equipped with thermal overload protection and automatic restart. The motor is fitted with sleeve bearings. Motor protection rating IP44.
• Speed control: stepwise speed control with an external autotransformer (sold separately).
• Installation: can be wall-mounted or installed in a duct; (mounting brackets included).
• Power supply: the fan is powered via the remote terminal box. Power supply and installation must be carried out in accordance with the terminal box manual and wiring diagram.

​Technical specifications:

• phases: 1
• voltage: 230 V
• frequency: 50 Hz
• power: 68 W
• current: 0.48 A
• max. airflow: 1070 m³/h
• speed in rpm: 1300 rpm
• noise level at a distance of 3 m: 37 dBA
• min. temperature of the air being handled: - 30°C
• max. temperature of the air being handled: + 40°C
• protection rating: resistant to dust and water splashes (IPX4, IP44)
• blade material: aluminum
• housing material: steel

Fan overall dimensions (see photo no. 3):

• diameter D: ⌀ 262 mm
• diameter d: ⌀ 7 mm
• B: 370 mm
• B1: 320 mm
• length L: 140 mm
• weight: 3.5 kg

VENTS OV1 315, axial fan

Vents OV1 series axial fans are designed to move large volumes of air at low pressure, with the option of wall or panel mounting. They are used to ventilate commercial, office and other public or industrial spaces. The fan has an asynchronous single-phase motor, with built-in thermal overload protection and automatic restart.

• for wall mounting or panel mounting
• with a steel housing and aluminum blades 
• application: combined (exhaust and supply) ventilation system for various rooms where high airflow is required with relatively low system resistance
• diameter: ⌀ 312 mm
• max. airflow: 1700 m³/h

• Suitable for use in commercial, office and other public or industrial spaces.
• Application: combined (exhaust and supply) ventilation system for various rooms where high airflow is required with relatively low system resistance.
• Motor: the single-phase induction motor is equipped with thermal overload protection with automatic restart. The motor is equipped with sleeve bearings. Protection rating of the motor IP44.
• Speed control: stepwise speed control with an external autotransformer (sold separately).
• Installation: can be wall-mounted or installed inline (duct); (fixing brackets included).
• Power supply: the fan is powered via the remote terminal box. Power supply and installation must be carried out in accordance with the terminal box manual and wiring diagram.

​Technical specifications:

• phases: 1
• voltage: 230 V
• frequency: 50 Hz
• power: 110 W
• current: 0.75 A
• max. airflow: 1700 m³/h
• speed in rpm: 1300 rpm
• noise level at a distance of 3 m: 42 dBA
• min. temperature of the air being handled: - 30°C
• max. temperature of the air being handled: + 40°C
• protection rating: resistant to dust and water splashes (IPX4, IP44)
• blade material: aluminum
• housing material: steel

Overall fan dimensions (see photo no. 3):

• diameter D: ⌀ 312 mm
• diameter d: ⌀ 9 mm
• B: 430 mm
• B1: 380 mm
• length L: 170 mm
• weight: 6.1 kg

VENTS VKOM 250, axial fan

Vents VKOM series low-pressure axial fan, with a steel housing and designed for installation / duct mounting directly in the ventilation system. The fan features a single-phase induction motor with built-in thermal overload protection and automatic restart.

• for use in commercial, office and other public or industrial spaces
• application: a combined (exhaust and supply) ventilation system for various spaces where high airflow is required with relatively low system resistance
• The fan is powered via the remote terminal box. Power supply and installation must be carried out in accordance with the terminal box manual and wiring diagram.
• diameter: ⌀ 262 mm
• max. airflow: 1070 m³/h

• Suitable for use in commercial, office and other public or industrial spaces.
• Application: a combined (exhaust and supply) ventilation system for various spaces where high airflow is required with relatively low system resistance.
• Motor: the single-phase induction motor is equipped with thermal overload protection with automatic restart. The motor is equipped with sleeve bearings. Motor protection rating: IP44.
• Speed control: stepwise speed adjustment with an external autotransformer (sold separately).
• Installation: can be wall-mounted or installed in a duct; (mounting brackets included).
• Power supply: the fan is powered via the remote terminal box. The power supply and installation must be carried out in accordance with the terminal box manual and wiring diagram.

Technical specifications:

• phases: 1
• voltage: 230 V
• frequency: 50 Hz
• power: 68 W
• current: 0.48 A
• max. airflow: 1070 m³/h
• speed in rpm: 1300 rpm
• noise level at a distance of 3 m: 37 dBA
• min. processed air temperature: - 30°C
• max. processed air temperature: + 40°C
• protection rating: dust- and splash-resistant (IPX4, IP44)
• blade material: aluminum
• housing material: steel

Overall fan dimensions (according to photo #3):

• B: 283 mm
• diameter D: ⌀ 262 mm
• length L: 270 mm
• L1: 55 mm
• L3: 30 mm
• weight: 3.7 kg

VENTS OV1 200, axial fan

Vents OV1 series axial fans are designed to move large volumes of air at low pressure and can be installed on a wall or panel. They are used for ventilation in commercial, office and other public or industrial spaces. The fan has an asynchronous single-phase motor with built-in overheating protection and automatic restart.

• for wall or panel mounting
• with a steel housing and aluminum blades 
• application: a combined (exhaust and supply) ventilation system for various rooms where high airflow is required at relatively low system resistance
• diameter: ⌀ 208 mm
• max. airflow: 390 m³/h

• Suitable for use in commercial, office and other public or industrial premises.
• Application: a combined (exhaust and supply) ventilation system for various rooms where high airflow is required at relatively low system resistance.
• Motor: the single-phase induction motor is equipped with thermal overload protection and automatic restart. The motor is equipped with sleeve bearings. Motor protection rating IP44.
• Speed control: stepped speed control using an external autotransformer (sold separately).
• Installation: can be wall-mounted or installed in a duct; (fixing brackets included).
• Power supply: the fan is powered via the remote terminal box. The power supply and installation must be carried out in accordance with the terminal box manual and wiring diagram.

​Technical specifications:

• phases: 1
• voltage: 230 V
• frequency: 50 Hz
• power: 33 W
• current: 0.23 A
• max. airflow: 390 m³/h
• speed in rpm: 1410 rpm
• noise level at a distance of 3 m: 33 dBA
• min. temperature of treated air: - 30°C
• max. temperature of treated air: + 40°C
• protection rating: dustproof and splash-resistant (IPX4, IP44)
• blade material: aluminum
• housing material: steel

Overall fan dimensions (see photo No. 3):

• diameter D: ⌀ 208 mm
• diameter d: ⌀ 7 mm
• B: 312 mm
• B1: 260 mm
• length L: 120 mm
• weight: 3.0 kg

VENTS NK 150-6.0-3 U, 6 kW duct heater Electric duct heater with a temperature controller or control unit. Designed for long-term use, this electric heater is ideal for locations that require rapid heating. The unit provides convenient temperature control, easy installation and low operating costs. Connected duct size - 150mm Minimum supply voltage - 400V Maximum supply voltage - 400V Supply frequency - 50Hz Rated power - 6000W Weight - 2kg

VENTS TT PRO 250 P is a high-performance two-speed inline fan with a mixed-flow axial-centrifugal impeller, designed for ventilating spaces that require high airflow and high static pressure. It is suitable for ventilation systems in greenhouses, grow rooms, production and commercial facilities, as well as residential applications. Thanks to its compact design and removable motor block, the fan is easy to install, service and clean.

VENTS TT PRO 250 P is part of the professional TT PRO series, developed for ductwork with high aerodynamic resistance. The combined axial and centrifugal fan technology provides significantly higher pressure than standard axial fans while maintaining high performance and relatively low noise levels.

The housing is made of high-quality impact-resistant polypropylene plastic, corrosion-resistant and suitable for operation in humid environments. The fan is equipped with a two-speed single-phase AC motor mounted on double-sealed ball bearings, providing a service life of up to 40 000 hours of continuous operation. Built-in thermal protection prevents motor overheating and automatically switches it off in the event of overload.

One of the model's main advantages is the removable central motor block, which allows easy servicing and cleaning without removing the ductwork. This significantly reduces maintenance time and makes ventilation-system upkeep easier. The fan can be installed horizontally or vertically, in any position, directly into round ductwork with a diameter of 250 mm.

Technical specifications

✔️ Manufacturer: VENTS

✔️ Model: TT PRO 250 P

✔️ Type: Mixed-flow inline fan

✔️ Duct diameter: Ø250 mm

✔️ Power supply: 220–240 V / 50–60 Hz

✔️ Number of speeds: 2

✔️ Power: 125 / 177 W

✔️ Current draw: 0.54 / 0.79 A

✔️ Maximum airflow: 1110 / 1400 m³/h

✔️ Speed: 1955 / 2440 rpm

✔️ Noise level (at 3 m): 44 / 51 dB(A)

✔️ Maximum air temperature: 60°C

✔️ Protection rating: IPX4

✔️ Housing material: Polypropylene

✔️ Bearing type: Ball bearing

✔️ Expected service life: Up to 40 000 hours

✔️ Dimensions: 383 × 287 × 323 mm

✔️ Connection diameter: 247 mm

✔️ Weight: 7.8 kg

📦 The kit includes

✔️ 1 × Inline fan VENTS TT PRO 250 P

✔️ Installation screws and wall plugs

✔️ User manual. - Manual.PDF - Datasheet.PDF

Benefits

✔️ High airflow up to 1400 m³/h

✔️ Excellent static pressure for long duct runs and carbon filters

✔️ Two-speed AC motor

✔️ Reliable ball bearings with a long service life

✔️ Thermal overload protection

✔️ Removable motor unit for easy maintenance

✔️ Can be installed in any position

✔️ Compact, robust housing made of impact-resistant plastic

✔️ Suitable for continuous operation

✔️ Low noise level for its performance.

Application

Suitable for:

• Grow rooms

• Greenhouses

• Ventilation systems with carbon filters

• Production areas

• Workshops

• Warehouses

• Commercial premises

• Bathrooms and sanitary facilities

• Kitchen ventilation

• Supply and extract ventilation.

📋 Instructions for use

1. Install the fan in a round Ø250 mm air duct.
2. Follow the airflow direction indicated by the arrow on the housing.
3. Connect the fan to the electrical supply according to the manufacturer's diagram.
4. Select the desired speed using a suitable two-speed switch or compatible controller.
5. Inspect the fan periodically and clean the impeller when necessary.
6. For servicing, remove the motor block without dismantling the air ducts.

⚠️ Important: The fan is designed to convey clean air at temperatures up to 60°C. Do not use the unit to extract explosive, flammable or heavily contaminated gases and dust particles. Ensure free access for periodic maintenance during installation.

💡 Tip from Urban Botaniks: For maximum efficiency in grow rooms, pair the TT PRO 250 P with a quality Ø250 mm carbon filter and sound-insulated air ducts. This ensures optimal air exchange, effective odour control and quieter operation of the whole ventilation system.

VENTS TT PRO 250, 1400 m³/h fan

VENTS TT PRO 250 1400m³/h is a high-performance centrifugal fan that can be used for supply or exhaust ventilation in spaces requiring increased pressure, powerful airflow and low noise levels. It is the ideal solution for ventilating bathrooms, kitchens and other humid spaces, as well as apartments, villas, shops, cafés, etc.

• housing made of high-quality, durable plastic
• single-phase, two-speed motor with low energy consumption
• thermal protection against overheating to prevent motor overload
• its motor's ball bearings guarantee a service life of 40,000 operating hours under continuous use
• equipped with clamps, allowing it to be removed for cleaning or changing the direction of airflow without needing to dismantle it

Technical specifications:

• inner diameter: ⌀ 250mm
• current: 230V, 50/60Hz
• min. / max. power: 125W / 177W
• min. / max. amperage: 0.54A / 0.79A
• min. / max. airflow: 1110m³/h / 1400m³/h
• min. / max. RPM: 1955 / 2440
• min. / max. noise level: 47dB / 56dB
• protection: IPX4
• dimensions W/H/D: 287 x 323 x 383mm
• weight: 7.8 kg
• 1-year warranty
   

Note: the fan does not include a power cord!

VENTS NK 200-6,0-3 U, 6 kW duct heater The Vents NK 200-6.0-3U electric heater is an efficient heating appliance with a power output of 6.0 kW, suitable for quickly and evenly heating medium-sized industrial spaces and workshops. The Vents NK 200-6.0-3U offers an excellent heating solution with its high power and efficiency. Designed for long-term use, this electric heater is ideal for places where rapid heating is needed. The unit provides convenient temperature control and easy installation. With a power output of 6.0 kW, the Vents NK 200-6.0-3U can heat efficiently and economically while providing comfort and warmth during the cold months. The Vents NK 200-6.0-3U electric heater comes with a heating controller. It has - a rated power of 6000 W - a voltage of 400 V - a rated current of 8.7 A. The heating controller is included. The air regulator does not directly control the heating element, which is instead activated based on the set temperature. The heating element requires up to 3 kW of power to operate. The heating element requires a minimum of 3 kW to operate with the post-heater (NKU), DTV500 and KDT2-M.

VENTS TT Silent-M 250, 1400 m³/h fan

VENTS TT Silent-M 250 1400m³/h is a centrifugal fan with a specially designed sound-insulated housing that ensures quiet operation and high aerodynamic performance. Fans in the Silent-M series are well suited for use in the ventilation systems of various commercial and industrial premises with high noise-level requirements, such as libraries, conference rooms, educational institutions, kindergartens, and more.

• specially designed outer housing made of polymer-coated steel
• the interior is lined with a 5mm layer of special thermal and sound-insulating wool
• the inside of the housing and the impeller are made of high-quality, durable plastic
• powerful airflow and high pressure
• single-phase, two-speed motor with low energy consumption
• motor equipped with ball bearings for a long service life of at least 40,000 operating hours

Technical specifications:

• inner diameter: ⌀ 250mm
• power supply: 230V, 50/60Hz
• min. / max. power: 125W / 177W
• min. / max. amperage: 0.54A / 0.79A
• min. / max. airflow: 1110m³/h / 1400m³/h
• min. / max. RPM: 1955 / 2440
• min. / max. noise level: 34dB / 38dB
• protection rating: IPX4
• dimensions W/H/D:  x  x mm
• weight: 15.0kg
• 1-year warranty
   

Note: the fan does not include a power cable!

VENTS OV1 150, axial fan

Vents OV1 series axial fans are designed to move large volumes of air at low pressure, with the option of wall or panel mounting. They are used for ventilation in commercial, office and other public or industrial premises. The fan has a single-phase induction motor with built-in thermal overload protection and automatic restart.

• for wall or panel mounting
• with a steel housing and aluminum blades 
• application: combined (exhaust and supply) ventilation system for various premises where high airflow is required with relatively low system resistance
• diameter: ⌀ 162 mm
• max. airflow: 180 m³/h

• Suitable for use in commercial, office and other public or industrial premises.
• Application: combined (exhaust and supply) ventilation system for various premises where high airflow is required with relatively low system resistance.
• Motor: the single-phase induction motor is equipped with thermal overload protection with automatic restart. The motor is equipped with sleeve bearings. Motor protection rating IP44.
• Speed control: stepwise speed adjustment using an external autotransformer (sold separately).
• Installation: can be wall-mounted or duct-mounted; (fixing brackets included).
• Power supply: the fan is powered via the remote terminal box. The power supply and installation must be carried out in accordance with the terminal box manual and wiring diagram.

​Technical specifications:

• phases: 1
• voltage: 230 V
• frequency: 50 Hz
• power: 26 W
• current: 0.19 A
• max. airflow: 180 m³/h
• speed in rpm: 1432 rpm
• noise level at a distance of 3 m: 33 dBA
• min. temperature of air handled: - 30°C
• max. temperature of air handled: + 40°C
• protection rating: dust- and splash-resistant (IPX4, IP44)
• blade material: aluminum
• housing material: steel

Fan dimensions (see image No. 3):

• diameter D: ⌀ 162 mm
• diameter d: ⌀ 7 mm
• B: 250 mm
• B1: 210 mm
• length L: 120 mm
• weight: 2.5 kg