Pumps and Compressors

The BOYU FP-1500 1500l/h submersible water pump is suitable for all hydroponic systems and systems that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 25W
• maximum water head: 2.5m
• maximum flow rate: 1500l/h
• outlet diameter: ⌀ 13 mm
• dimensions: 104 x 93 x 140mm

The BOYU FP-750 submersible water pump, 750L/h, is suitable for all hydroponic systems and those that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the smart design.

• voltage: 230V, 50/60Hz
• power: 12W
• maximum head height: 1.5m
• maximum flow rate: 750L/h
• outlet diameter: ⌀ 13mm
• dimensions: 224 x 139 x 144mm

BOYU FP-1000 1000L/h submersible water pump is suitable for all hydroponic systems and systems that require pumping nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 16W
• max. water head: 1.8m
• max. flow rate: 1000L/h
• outlet diameter: ⌀ 15mm
• dimensions: 89 x 70 x 111mm

BOYU FP-150 150l/h submersible water pump is suitable for all hydroponic systems and those that require pumping nutrient solutions. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 2.5W
• max. water head: 0.6m
• max. flow rate: 150l/h
• outlet diameter: ⌀ 11mm
• dimensions: 50 x 43 x 48mm

Outer diameter of inlet opening: 9mm 

Outer diameter of outlet openings: 4mm

Outer diameter of the inlet: 13mm 

Outer diameter of the outlets: 6mm

BOYU FP-100 submersible water pump 120L/h is suitable for all hydroponic systems and those that require pumping nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• Power: 1.5W
• Maximum head height: 0.3m
• Maximum flow rate: 120L/h
• Outlet diameter: ⌀ 8mm
• Product dimensions: 40 x 36 x 42mm

BOYU SES-10 air pump is specially designed for quiet operation. It has an aluminum motor shell, good heat dissipation and long life. Features high flow rate and high pressure air.  

• current: 230V, 50/60Hz
• power: 10W
• pressure: > 0.02Mpa
• flow rate: 10l/min / 600l/h
• outlet diameter: ⌀ 8mm
• dimensions: 187 x 107 x 114mm

The BOYU FP-350 350l/h submersible water pump is suitable for all hydroponic systems and systems that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 6W
• maximum water head: 0.8m
• maximum flow rate: 350l/h
• outlet diameter: ⌀ 13 mm
• dimensions: 69x54x82 mm

Wave Maker 3000 by Neptune Hydroponics is a water circulator for mixing nutrient solutions in containers, promoting water oxygenation.

• Power: 6W
• Flow rate: 3000 L/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5 kg

Note: This product is specifically designed to create water movement. It is not a filter pump. Please consult your distributor before use.

WARNING: Please ensure that all pump parts are in good condition before use. Do not connect it to the mains if the voltage differs from that stated on the label.

• We recommend keeping the magnets separate before they are fitted. Avoid placing your hands between them due to their strong magnetism, and remove all metal objects or other magnets so they are not attracted, preventing possible injury.
• The strong magnetism produced by magnets can cause permanent damage to electrical equipment and other objects, such as pacemakers, credit cards, keys ... Keep at a safe distance of at least 30 centimetres.
• Keep out of reach of children and pets!

BOYU FP-3000 submersible water pump 3000 l/h is suitable for all hydroponic systems and systems requiring nutrient-solution pumping. The shaft is non-corrosive and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its intelligent design.

• voltage: 230V, 50/60Hz
• power: 68W
• height of the water column max: 3.5m
• flow max: 3000l/h
• outlet diameter: ⌀ 19mm
• dimensions: 132 x 106 x 172mm

The  BOYU S-500 air pump is made from high-polymer composite rubber for a longer service life and reliability. It features low operating noise, high air capacity and requires no oil lubrication. It also has electronic inlet ratio control for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 2.8 W
• pressure: > 0.010 MPa
• flow rate: 4l/min / 240l/h
• outlet diameter: ⌀ 4 mm
• weight: 0.3 kg
• dimensions: 116 x 70 x 56 mm

BOYU FP-2000 2000 L/h submersible water pump is suitable for all hydroponic systems and applications that require pumping nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the smart design.

• voltage: 230V, 50/60Hz
• power: 43W
• maximum head height: 3.0m
• maximum flow rate: 2000L/h
• outlet diameter: ⌀ 19mm
• dimensions: 118 x 101 x 158mm

The air pump BOYU S-1000 is made of high-polymer composite rubber for longer service life and reliability. It features low operating noise, high air capacity and requires no oil lubrication. It also has electronic control of the input ratio for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.014Mpa
• flow rate: 4.2L/min / 252L/h
• outlet diameter: ⌀ 4mm
• weight: 0.5kg
• dimensions: 138 x 80 x 59mm

The air pump BOYU S-2000 is made from high-polymer composite rubber for longer service life and reliability. It features low operating noise, a high air capacity and requires no oil lubrication. It also has electronic input-ratio control for high efficiency and low energy consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.012Mpa
• flow rate: 4l/min / 240l/h
• outlet diameter: 2 x ⌀ 4mm
• weight: 0.82kg
• dimensions: 163 x 105 x 88mm

Wave Maker 6000 from Neptune Hydroponics is a water agitator for mixing nutrient solutions in containers, promoting water oxygenation.

• Power: 12W
• Flow rate: 6000L/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5kg

Note: This product is specifically designed to generate water movement. It is not a filter pump. Please consult your distributor before use.

CAUTION: Please make sure all pump parts are in good condition before use. Do not connect it to the mains if the voltage differs from that stated on the label.

• We recommend keeping the magnets separate before they are fitted. Avoid placing your hands between them due to their strong magnetism, and remove all metal objects or other magnets so they are not attracted, preventing possible injury.
• The strong magnetism produced by magnets can cause permanent damage to electrical equipment and other objects, such as pacemakers, credit cards, keys ... Keep at a safe distance of at least 30 centimetres.
• Keep out of reach of children and pets!

Outer diameter of inlet opening – 9 mm

Outer diameter of outlet openings – 4 mm

Adjustable, quiet air pump Hailea ACO-9630 with a flow rate of up to 16 L/min (960 L/h) and 8 outlets — ideal for aerating tanks, hydroponic systems and aquariums.

Detailed features

• Model: ACO-9630 (ACO series)
• Maximum flow rate: 16 L/min (960 L/h)
• Power consumption: 15 W
• Noise level: < 45 dB
• Head / maximum pressure: ~ 1,5 m (~0.015 MPa)
• Voltage range: 110-120 V / 220-240 V, 50/60 Hz (universal power supply)
• Weight: ~ 2,7 kg
• Dimensions (length × width × height): 248 × 176 × 137 mm
• Design features:
    • 8 outlets with metal fittings
    • Adjustable flow — allows smooth adjustment of the air volume flow
    • Oil-free device — clean air without contamination
    • Multi-layer sound insulation and shock-absorbing feet for minimal vibration and noise

Recommendations for use

• Place the pump on a stable, level surface with vibration-absorbing pads (rubber feet) to minimise noise.
• Connect each of the 8 outlets using flexible tubing (usually Ø 4 mm) — use all of them or only the required number, depending on your needs.
• Adjust the flow to the volume of the system or tank — for smaller tanks, you can reduce it to a low flow rate.
• Keep the inlet filters clean and dust-free to avoid a drop in output.
• Make sure the pump is positioned above the water level or protected by a backflow safety measure so that it does not draw water back in during an interruption.

Benefits

The Hailea ACO-9630 air pump combines power and flexibility: with a flow rate of up to 16 L/min and 8 independent outlets, it is suitable for large, multi-point systems. Its low power consumption (15 W), adjustability and quiet operation make it an excellent choice for aerating tanks, hydroponic systems, aquariums and other installations requiring a reliable oxygen flow.

The BOYU SES-20 air pump is specially designed for quiet operation. It has an aluminium motor housing, good heat dissipation and a long service life. It is characterised by high flow rate and high air pressure.

• voltage: 230V, 50/60Hz
• power: 15W
• pressure: > 0.02Mpa
• flow rate: 20l/min / 1200l/h
• outlet diameter: ⌀ 8mm
• dimensions: 224 x 139 x 144mm

The BOYU S-4000 air pump is made from high-polymer composite rubber for a longer service life and reliability. It features low operating noise, high air output and requires no oil lubrication. It also has electronic inlet ratio control for high efficiency and low energy consumption.

• voltage: 230, 50/60Hz
• power: 9W
• pressure: > 0.012Mpa
• flow rate: 3.2l/min 768l/h
• outlet diameter: 4 x ⌀ 4mm
• dimensions: 206 x 149 x 96mm

Quiet and energy efficient Hailea ACO-9601 air pump with flow rate up to 3.2 L/min (192 L/h), adjustable flow and single outlet - ideal for small aquariums and

hydroponic systems.

Detailed specifications:     Model: ACO-9601 (ACO series) - Hailea adjustable airflow model.  Air

flow (maximum): 3.2 L/min (≈ 192 L/h).   Consumption: 2 W  

Noise level: < 40 dB  

Maximum pressure: > 0.012 MPa  Power supply / voltage:

110–120 V / 220–240 V, 50/60 Hz

Number of outlets: 1 outlet (Ø 4 mm). Dimensions: 136 × 78 ×

68 mm   Weight: ~ 0.40 kg   Construction and additional

features:   • Oil-free construction for clean air   • Multi-layer sound

insulation.   • Air flow regulator to

refine the flow rate.   •

Rubberized feet to reduce vibrations.   Recommendations
for use: Place
the pump above the water level to prevent
back suction. Connect the outlet with

a suitable Ø

• 4 mm hose and distribute the air through water stones.
• Adjust the flow according to the needs of the system using the rotary
• regulator. Keep the inlet filter clean—dust and dirt
• can reduce performance. Use rubber feet or a stand to reduce
• noise and vibration. Be careful not to submerge the pump—it
• is designed for aerial work, not submersion.   Benefits Hailea ACO-9601 offers quiet and stable air

flow

(up to 3.2 L/min) with minimum consumption (2 W), adjustable flow rate and reliable construction. With a single outlet and multi-phase noise isolation, the pump is suitable for compact systems where clean and precise air flow is required.

Sicce VOYAGER 4 6000 L/h is a submersible circulation pump that, by simulating wave movement, increases water circulation in the nutrient reservoir and thus prevents dissolved nutrients from settling. Thanks to its reliable magnetic mount, the pump can be placed anywhere in the reservoir, while its ability to rotate 360° allows you to direct it in any desired direction.

• flow rate: 6000 L/h
• power: 14W
• suitable for reservoirs with a volume of: 400-730 L
• silent
• self-cleaning impeller
• secure magnetic attachment
• wide, gentle flow
• 3-year warranty

User manual: here*

Key features:

• unique bidirectional rotor for one-direction start-up and silent operation
• 360° base rotation for positioning as required
• reliable magnetic mount and additional rubber pad to prevent vibrations; reservoir wall thickness up to 1.5 cm.
• silent
• self-cleaning impeller
• secure magnetic attachment
• wide, gentle flow
• flow adjustment
• stainless-steel shaft
• The pump can be used in liquids or in an environment with a temperature not higher than 35°C!
• made in Italy
• 3-year warranty

Technical specifications:

• flow rate: 6000 L/h
• power: 14W
• suitable for reservoirs with a volume of: 400-730L
• voltage: 230-240V / 50hz

The BOYU SES-60 air pump is specifically designed for quiet operation. It has an aluminium motor housing, good heat dissipation and a long service life. It is characterised by high airflow and high air pressure.  

• current: 230V, 50/60Hz
• power: 35W
• pressure: > 0.03Mpa
• airflow: 60l/min / 3600l/h
• outlet diameter: ⌀ 13mm
• dimensions: 309 x 186 x 210mm

The BOYU LK-80 air pump is specially designed for quiet operation, just like every SES air pump. The only difference is that the LK model has a higher flow rate and higher air pressure. It features an aluminium motor housing, good heat dissipation and a long service life. 

• current: 230V, 50/60Hz
• power: 50W
• pressure: > 0.035Mpa
• flow rate: 80L/min / 4800L/h
• outlet diameter: ⌀ 19mm
• dimensions: 288 x 196 x 193mm

The BOYU SES-40 air pump is specially designed for quiet operation. It has an aluminium motor housing, good heat dissipation and a long lifespan. It is characterised by high flow rate and high air pressure.  

• voltage: 230V, 50/60Hz
• power: 30W
• pressure: > 0.03Mpa
• flow rate: 40l/min / 2400l/h
• outlet diameter: ⌀13mm
• dimensions: 275 x 167 x 176mm

Compact and reliable submersible pump Hailea HX-8810 with a flow rate of approx. 1 050 L/h and good head pressure, suitable for ponds, small fountains, circulation and hydroponic systems.

Detailed features

• Model: HX-8810 (HX-8800 series).
• Power: 12 W.
• Power supply: 220–240 V / 50 Hz.
• Flow rate: 1 050 L/h.
• Maximum head (Max jet): 1.4 m.
• Outlet diameter: Ø 20 mm.
• Dimensions: 211 × 102 × 145 mm.

Design features:

• Ceramic shaft (alumina ceramic) — corrosion-resistant.
• Double water-cooling structure for rapid heat dissipation.
• ABS plastic housing, corrosion-resistant and resistant to alkaline environments.
• Can be used submerged and out of water.
• Protective intake cover / filter for protection from particles.
• Rubber suction feet for fixing to surfaces, providing stability and minimal vibration.
•  

Recommendations for use

• Install the pump on a clean, sturdy surface and use the rubber suction feet to prevent movement and vibration.
• Connect a Ø 20 mm hose (or suitable adapter) to maintain maximum efficiency.
• Keep the intake filter/cover clean—regular cleaning will prevent a drop in flow rate caused by build-up.
• Never allow the pump to run dry—it must be at least partially submerged or supplied with adequate water flow.
• If you use the pump out of water, provide dust protection and stable fixing, as well as cooling/ventilation.
• For long hose runs, check for pressure drop and losses along the way.

Benefits

Hailea HX-8810 is a compact, efficient, versatile pump with a flow rate of ~1 050 L/h and a maximum head of 1,4 m. It combines a robust construction with a ceramic shaft, ABS housing, dual water cooling and the option of use both underwater and out of water. This makes it a suitable choice for a range of water applications—ponds, fountains, circulation systems and hydroponic systems.

The BOYU FP-4000 submersible water pump, 4000 l/h, is suitable for all hydroponic systems and systems that require pumping nutrient solutions. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V 50/60Hz
• power: 75W
• max. water head: 3m
• max. flow rate: 4000L/h
• outlet diameter: ⌀ 19mm
• dimensions: 132 x 106 x 172mm

Compact and efficient submersible pump Hailea HX-8830 with a flow rate of 2 900 L/h and a maximum head of around 2,3 m — ideal for ponds, fountains and circulation systems. Water pump for installation inside or outside a reservoir. High-quality ABS plastic housing. Corrosion-resistant ceramic shaft, resistant to all solutions. Suitable for 200-300L reservoirs. Flow rate: 2900L/h Head height: 2,3m Power: 45W Input voltage: 220-240V 50Hz Outlet diameter: 25mm. Designed for continuous use; its detachable filter allows use inside or outside the reservoir. Double water-cooling construction for rapid heat dissipation. Suitable for all hydroponic needs: pumping, aeration, NFT and filtration. Suction cups provide secure attachment in the reservoir.

Detailed features

• Model: HX-8830
• Power: 45 W
• Flow rate: 2 900 L/h
• Maximum head: approximately 2,3 m
• Outlet/hose diameter: 25 mm (1")
• Dimensions: 157 × 85 × 104 mm
• Weight: ~ 1,18 kg

Construction and features:

• Shaft: ceramic/aluminium-ceramic — corrosion-resistant; suitable for fresh and salt water.
• Cooling: double water cooling for rapid heat dissipation.
• Housing: ABS plastic, resistant to alkalis and corrosion.
• Sealing and insulation: the motor is sealed with epoxy resin to make the windings waterproof.
• Installation: rubber suction feet for securing it to surfaces.
• Application: suitable for submersion (in water) or inline use outside water.
• Filter protection: supplied with a cover/filter fitted over the intake to prevent clogging.

Recommendations for use

• Install the pump on a solid surface and, where possible, use the rubber suction feet to reduce vibration.
• Use suitable Ø 25 mm hose to maintain the stated flow rate and minimise pressure losses.
• Clean the intake filter/cover regularly to prevent reduced flow caused by contamination.
• Do not allow the pump to run dry — it must always be at least partially submerged or in contact with water.
• If using the pump outside water, provide protection from dust and ensure stable mounting.

Benefits

Hailea HX-8830 is a compact, reliable and efficient submersible pump with a flow rate of 2 900 L/h and a head of around 2,3 m. With a ceramic shaft, ABS housing and double water cooling, it offers good corrosion resistance and a long service life. Its ability to operate both underwater and outside water makes it a flexible choice for various water applications.

Water Master ACO-002 with 6 outlets (40 L/min) is an air compressor with an advanced compression system and exceptionally quiet operation. It contains special synthetic rubber to keep output and air pressure constant over time. Its small, compact construction ensures a long service life with minimal energy consumption.

• exceptionally quiet
• constant air pressure
• small and compact
• long-lasting use
• energy efficient

Technical specifications:

• voltage: 220V / 50Hz
• power: 35 W
• flow rate: 40 L/min (2400 L/h)
• pressure: 0.03 MPa
• outlets: 6 pcs.
• dimensions: 16.1 x 9.4 x 11.2 cm
• weight: 1.2 kg