Water Pumps

The BOYU FP-1500 1500l/h submersible water pump is suitable for all hydroponic systems and systems that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 25W
• maximum water head: 2.5m
• maximum flow rate: 1500l/h
• outlet diameter: ⌀ 13 mm
• dimensions: 104 x 93 x 140mm

The BOYU FP-750 submersible water pump, 750L/h, is suitable for all hydroponic systems and those that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the smart design.

• voltage: 230V, 50/60Hz
• power: 12W
• maximum head height: 1.5m
• maximum flow rate: 750L/h
• outlet diameter: ⌀ 13mm
• dimensions: 224 x 139 x 144mm

BOYU FP-1000 1000L/h submersible water pump is suitable for all hydroponic systems and systems that require pumping nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 16W
• max. water head: 1.8m
• max. flow rate: 1000L/h
• outlet diameter: ⌀ 15mm
• dimensions: 89 x 70 x 111mm

BOYU FP-150 150l/h submersible water pump is suitable for all hydroponic systems and those that require pumping nutrient solutions. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 2.5W
• max. water head: 0.6m
• max. flow rate: 150l/h
• outlet diameter: ⌀ 11mm
• dimensions: 50 x 43 x 48mm

BOYU FP-100 submersible water pump 120L/h is suitable for all hydroponic systems and those that require pumping nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• Power: 1.5W
• Maximum head height: 0.3m
• Maximum flow rate: 120L/h
• Outlet diameter: ⌀ 8mm
• Product dimensions: 40 x 36 x 42mm

The BOYU FP-350 350l/h submersible water pump is suitable for all hydroponic systems and systems that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 6W
• maximum water head: 0.8m
• maximum flow rate: 350l/h
• outlet diameter: ⌀ 13 mm
• dimensions: 69x54x82 mm

Wave Maker 3000 by Neptune Hydroponics is a water circulator for mixing nutrient solutions in containers, promoting water oxygenation.

• Power: 6W
• Flow rate: 3000 L/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5 kg

Note: This product is specifically designed to create water movement. It is not a filter pump. Please consult your distributor before use.

WARNING: Please ensure that all pump parts are in good condition before use. Do not connect it to the mains if the voltage differs from that stated on the label.

• We recommend keeping the magnets separate before they are fitted. Avoid placing your hands between them due to their strong magnetism, and remove all metal objects or other magnets so they are not attracted, preventing possible injury.
• The strong magnetism produced by magnets can cause permanent damage to electrical equipment and other objects, such as pacemakers, credit cards, keys ... Keep at a safe distance of at least 30 centimetres.
• Keep out of reach of children and pets!

BOYU FP-3000 submersible water pump 3000 l/h is suitable for all hydroponic systems and systems requiring nutrient-solution pumping. The shaft is non-corrosive and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its intelligent design.

• voltage: 230V, 50/60Hz
• power: 68W
• height of the water column max: 3.5m
• flow max: 3000l/h
• outlet diameter: ⌀ 19mm
• dimensions: 132 x 106 x 172mm

BOYU FP-2000 2000 L/h submersible water pump is suitable for all hydroponic systems and applications that require pumping nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the smart design.

• voltage: 230V, 50/60Hz
• power: 43W
• maximum head height: 3.0m
• maximum flow rate: 2000L/h
• outlet diameter: ⌀ 19mm
• dimensions: 118 x 101 x 158mm

Wave Maker 6000 from Neptune Hydroponics is a water agitator for mixing nutrient solutions in containers, promoting water oxygenation.

• Power: 12W
• Flow rate: 6000L/h
• Voltage/frequency: 220V-240V/50Hz
• Weight: 0.5kg

Note: This product is specifically designed to generate water movement. It is not a filter pump. Please consult your distributor before use.

CAUTION: Please make sure all pump parts are in good condition before use. Do not connect it to the mains if the voltage differs from that stated on the label.

• We recommend keeping the magnets separate before they are fitted. Avoid placing your hands between them due to their strong magnetism, and remove all metal objects or other magnets so they are not attracted, preventing possible injury.
• The strong magnetism produced by magnets can cause permanent damage to electrical equipment and other objects, such as pacemakers, credit cards, keys ... Keep at a safe distance of at least 30 centimetres.
• Keep out of reach of children and pets!

Sicce VOYAGER 4 6000 L/h is a submersible circulation pump that, by simulating wave movement, increases water circulation in the nutrient reservoir and thus prevents dissolved nutrients from settling. Thanks to its reliable magnetic mount, the pump can be placed anywhere in the reservoir, while its ability to rotate 360° allows you to direct it in any desired direction.

• flow rate: 6000 L/h
• power: 14W
• suitable for reservoirs with a volume of: 400-730 L
• silent
• self-cleaning impeller
• secure magnetic attachment
• wide, gentle flow
• 3-year warranty

User manual: here*

Key features:

• unique bidirectional rotor for one-direction start-up and silent operation
• 360° base rotation for positioning as required
• reliable magnetic mount and additional rubber pad to prevent vibrations; reservoir wall thickness up to 1.5 cm.
• silent
• self-cleaning impeller
• secure magnetic attachment
• wide, gentle flow
• flow adjustment
• stainless-steel shaft
• The pump can be used in liquids or in an environment with a temperature not higher than 35°C!
• made in Italy
• 3-year warranty

Technical specifications:

• flow rate: 6000 L/h
• power: 14W
• suitable for reservoirs with a volume of: 400-730L
• voltage: 230-240V / 50hz

Compact and reliable submersible pump Hailea HX-8810 with a flow rate of approx. 1 050 L/h and good head pressure, suitable for ponds, small fountains, circulation and hydroponic systems.

Detailed features

• Model: HX-8810 (HX-8800 series).
• Power: 12 W.
• Power supply: 220–240 V / 50 Hz.
• Flow rate: 1 050 L/h.
• Maximum head (Max jet): 1.4 m.
• Outlet diameter: Ø 20 mm.
• Dimensions: 211 × 102 × 145 mm.

Design features:

• Ceramic shaft (alumina ceramic) — corrosion-resistant.
• Double water-cooling structure for rapid heat dissipation.
• ABS plastic housing, corrosion-resistant and resistant to alkaline environments.
• Can be used submerged and out of water.
• Protective intake cover / filter for protection from particles.
• Rubber suction feet for fixing to surfaces, providing stability and minimal vibration.
•  

Recommendations for use

• Install the pump on a clean, sturdy surface and use the rubber suction feet to prevent movement and vibration.
• Connect a Ø 20 mm hose (or suitable adapter) to maintain maximum efficiency.
• Keep the intake filter/cover clean—regular cleaning will prevent a drop in flow rate caused by build-up.
• Never allow the pump to run dry—it must be at least partially submerged or supplied with adequate water flow.
• If you use the pump out of water, provide dust protection and stable fixing, as well as cooling/ventilation.
• For long hose runs, check for pressure drop and losses along the way.

Benefits

Hailea HX-8810 is a compact, efficient, versatile pump with a flow rate of ~1 050 L/h and a maximum head of 1,4 m. It combines a robust construction with a ceramic shaft, ABS housing, dual water cooling and the option of use both underwater and out of water. This makes it a suitable choice for a range of water applications—ponds, fountains, circulation systems and hydroponic systems.

The BOYU FP-4000 submersible water pump, 4000 l/h, is suitable for all hydroponic systems and systems that require pumping nutrient solutions. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V 50/60Hz
• power: 75W
• max. water head: 3m
• max. flow rate: 4000L/h
• outlet diameter: ⌀ 19mm
• dimensions: 132 x 106 x 172mm

Compact and efficient submersible pump Hailea HX-8830 with a flow rate of 2 900 L/h and a maximum head of around 2,3 m — ideal for ponds, fountains and circulation systems. Water pump for installation inside or outside a reservoir. High-quality ABS plastic housing. Corrosion-resistant ceramic shaft, resistant to all solutions. Suitable for 200-300L reservoirs. Flow rate: 2900L/h Head height: 2,3m Power: 45W Input voltage: 220-240V 50Hz Outlet diameter: 25mm. Designed for continuous use; its detachable filter allows use inside or outside the reservoir. Double water-cooling construction for rapid heat dissipation. Suitable for all hydroponic needs: pumping, aeration, NFT and filtration. Suction cups provide secure attachment in the reservoir.

Detailed features

• Model: HX-8830
• Power: 45 W
• Flow rate: 2 900 L/h
• Maximum head: approximately 2,3 m
• Outlet/hose diameter: 25 mm (1")
• Dimensions: 157 × 85 × 104 mm
• Weight: ~ 1,18 kg

Construction and features:

• Shaft: ceramic/aluminium-ceramic — corrosion-resistant; suitable for fresh and salt water.
• Cooling: double water cooling for rapid heat dissipation.
• Housing: ABS plastic, resistant to alkalis and corrosion.
• Sealing and insulation: the motor is sealed with epoxy resin to make the windings waterproof.
• Installation: rubber suction feet for securing it to surfaces.
• Application: suitable for submersion (in water) or inline use outside water.
• Filter protection: supplied with a cover/filter fitted over the intake to prevent clogging.

Recommendations for use

• Install the pump on a solid surface and, where possible, use the rubber suction feet to reduce vibration.
• Use suitable Ø 25 mm hose to maintain the stated flow rate and minimise pressure losses.
• Clean the intake filter/cover regularly to prevent reduced flow caused by contamination.
• Do not allow the pump to run dry — it must always be at least partially submerged or in contact with water.
• If using the pump outside water, provide protection from dust and ensure stable mounting.

Benefits

Hailea HX-8830 is a compact, reliable and efficient submersible pump with a flow rate of 2 900 L/h and a head of around 2,3 m. With a ceramic shaft, ABS housing and double water cooling, it offers good corrosion resistance and a long service life. Its ability to operate both underwater and outside water makes it a flexible choice for various water applications.

Small, versatile submersible pump Hailea HX-1500 with a flow rate of up to 400 L/h, adjustable flow, and the ability to operate at a low water level — ideal for hydroponics, reservoirs, and circulation systems.

Detailed specifications:

• Flow rate: 400 L/h — maximum flow under optimal conditions
• Power: 5 W
• Maximum head: 0.7 m
• Power supply / voltage: 220-240 V / 50 Hz
• Connection / outlet diameter: Ø 12 mm (inlet/outlet)
• Housing: ABS plastic, corrosion-resistant and suitable for fresh and salt water
• Shaft / axle: stainless steel.

Additional features:

• Flow regulator — allows the flow rate to be reduced or increased
• Rubber suction feet for attachment to glass or a smooth surface (for stability)
• Suitable for operation at a low water level — the pump can function even when the water level is low

Recommendations for use

• Secure the pump firmly using the rubber suction feet to prevent vibration or displacement.
• Use a Ø 12 mm hose (or an adapter for one) to connect to the outlet.
• Adjust the flow according to the system's needs — if a low flow rate is required, reduce it using the built-in regulator.
• Periodically clean the intake grille / cover to avoid clogging and reduced performance.
• Make sure the pump does not run dry — it must be submerged or connected to water.
• When used with nutrient solutions (in hydroponics), check the compatibility of the materials with the concentrations in the solution.

Benefits

Hailea HX-1500 is a useful choice for small to medium-sized systems where space is limited but constant circulation is needed. With its 400 L/h flow rate, adjustable flow and durable housing, it is suitable for tanks, NFT systems, aquariums and other installations. Its ability to operate at a low water level adds flexibility to installation and design.

Multifunctional submersible/external pump Hailea HX-8890 with a flow rate of up to 8 000 L/h and a maximum head of 5 m — suitable for ponds, fountains, circulation systems and hydroponic systems. High-quality ABS plastic housing. Corrosion-resistant ceramic shaft, resistant to all solutions. Suitable for high-pressure systems. Flow rate: 8000L/h Water head: 5,0m Power: 200W Input voltage: 220-240V 50Hz Outlet diameter: 32mm designed for continuous use detachable filter - allows use in or outside the tank dual water-cooled design for rapid heat dissipation suitable for all hydroponic needs - pumping, aeration, NFT, filtration suction cups for secure attachment in the tank

Detailed features

• Flow rate: 8 000 L/h
• Maximum head (Water column): 5,0 m
• Power: 200 W
• Power supply / voltage: 220-240 V / 50 Hz
• Outlet diameter: Ø 32 mm
• Dimensions: 242 × 145 × 170 mm
• Housing material: ABS plastic, corrosion-resistant, impact-resistant
• Shaft / axle: Ceramic shaft, corrosion-resistant, suitable for saltwater and freshwater
• Cooling: Dual water cooling for rapid heat dissipation
• Filter: Removable filter, suitable for use both in and outside
• Installation: Submersible installation + suction cups
• Applications: fountains, water transfer, circulation systems, irrigation systems

Recommendations for use

• Install the pump securely, using the rubber suction feet or additional fastenings, to avoid vibrations.
• Use a suitable hose diameter (32 mm) to maximise efficiency and reduce pressure losses.
• Keep the filter clean — rinse or clean it periodically to avoid clogging.
• Avoid dry running; the pump must be at least partially submerged during operation.
• When installing outside water, provide protection from dust, weather conditions and a stable base.
• After prolonged use, stop, remove the pump and clean the shaft and housing if there are deposits or contaminants.

Benefits

Hailea HX-8890 is a powerful and reliable submersible pump with high performance, a ceramic shaft and a sturdy ABS housing. With the ability to operate both under and outside water and excellent flow and head ratings, it is suitable for a variety of applications — from ponds to hydroponic systems

Sicce VOYAGER HP7 10500L/h is a submersible circulation pump which, by simulating wave motion, increases water circulation in the nutrient reservoir, thereby preventing dissolved nutrients from settling. Thanks to its reliable magnetic mount, the pump can be placed anywhere in the reservoir, and its ability to rotate 360° lets you direct it in any desired direction.

• flow rate: 10500L/h
• power: 17W
• suitable for reservoirs with a volume of: 700-1200L
• silent
• self-cleaning impeller
• secure magnetic attachment
• wide, gentle flow
• 3-year warranty

User manual: here*

Key features:

• unique bidirectional rotor for one-direction start-up and silent operation
• 360° base rotation for positioning as required
• reliable magnetic mount and an additional rubber pad to avoid vibrations; reservoir thickness up to 2cm.
• silent
• self-cleaning impeller
• secure magnetic attachment
• wide, gentle flow
• flow adjustment
• ceramic shaft
• The pump can be used in liquids or in an environment with a temperature not higher than 35°C!
• made in Italy
• 3-year warranty

Technical specifications:

• flow rate: 10500L/h
• power: 17W
• suitable for reservoirs with a volume of: 700-1200L
• voltage: 230-240V / 50hz

Reliable and versatile submersible pump Hailea HX-8860 with a flow rate of 5 800 l/h and a maximum head of around 4,1–4,2 m — for ponds, fountain systems and recirculation. Water pump for installation inside or outside the reservoir. High-quality ABS plastic housing. Corrosion-resistant ceramic shaft, resistant to all solutions. Suitable for reservoirs of around 400L and drip systems. Flow rate: 5800L/h Water head: 4,1m Power: 130W Input voltage: 220-240V 50Hz Outlet diameter: 25mm Designed for continuous use. Removable filter allows use inside or outside the reservoir. Double water-cooled design for rapid heat dissipation. Suitable for all hydroponic needs — pumping, aeration, NFT and filtration. Suction cups for secure fixing in the reservoir.

Detailed features

• Model: HX-8860
• Material: corrosion- and impact-resistant ABS plastic housing
• Shaft / axle: aluminium-ceramic shaft (aluminium-zirconium ceramic)
• Power supply / voltage: 110-120 / 220-240 V (depending on version)
• Power: ~ 150 W
• Flow rate: 5 800 l/h
• Maximum head: around 4,1–4,2 m
• Outlet diameter: Ø 18 mm
• Dimensions: 242 × 145 × 170 mm
• Weight: around 2,9 kg

Features:

  • Suitable for fresh and salt water.
  • Double water cooling for rapid heat dissipation.
  • High-quality resin motor seal for ingress protection.
  • Filter / cover included for protection against debris.
  • Can operate submerged or externally.

Recommendations for use

• Install the pump securely using the rubber suction feet or a suitable surface mounting to reduce vibration.
• Use a hose with an internal diameter of 18 mm to connect to the outlet.
• Keep the filter clean — clean it regularly to prevent a drop in flow rate.
• The pump must not run dry: it must always be submerged or connected to a water flow.
• When installed outside water, ensure dust protection and stable mounting.
• If used for fountains or high jets, match the operating head to the elevation.

Benefits

The Hailea HX-8860 pump offers reliability, a robust housing and excellent performance — 5 800 l/h flow rate and up to ~4,2 m head. With its aluminium-ceramic shaft and double water cooling, it is suitable for a wide range of water applications — from ponds and recirculation to fountain systems.

BOYU FP-6000 submersible water pump 6000l/h is suitable for all hydroponic systems and those that require pumping of nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the smart design.

• voltage: 230V, 50/60Hz
• power: 105W
• max. water column height: 5.2m
• max. flow rate: 6000l/h
• outlet diameter: ⌀ 25mm
• dimensions: 162 x 133 x 209mm

Compact and efficient submersible pump Hailea HX-4500 with a flow rate of up to 2 000 l/h and a head of up to 2,8 m — suitable for ponds, fountains, feeding and circulation systems. Includes a mixer for aerating the solution; designed for long-term use; works well with a low water level in the reservoir; features a built-in flow regulator; suitable for NFT and Flood-and-Drain systems; includes suction cups for secure attachment in the reservoir.

Detailed features

• Flow rate (maximum): 2 000 L/h.
• Maximum head: 2,8 m.
• Power: 36 W.
• Power supply: 220-240 V / 50 Hz.
• Outlet diameter: 20 mm.
• Construction: housing made of ABS plastic, stainless-steel shaft, resistant to fertiliser solutions

Features:

• Rotary flow-control dial
• Built-in mixing port / air-intake accessory on some versions
• Suction cups for securing to surfaces
• Ability to operate at low water level

Recommendations for use

• Secure the pump to a smooth surface with the rubber suction feet to avoid vibration and movement.
• Use a Ø 20 mm hose to avoid a reduction in flow rate.
• Adjust the flow rate according to your needs, especially at different water-column heights.
• Clean the intake cover / filter regularly to prevent clogging and loss of performance.
• Never allow the pump to run dry — it must always be at least partly submerged or supplied with water contact.
• When used in nutrient-solution systems (hydroponics), check the material's compatibility with fertiliser solutions.

Benefits

Hailea HX-4500 is a reliable compact pump offering a flow rate of up to 2 000 L/h, adjustable flow and robust construction. It provides good head for small to medium systems and is suitable for fountains, ponds and hydroponic installations.

Compact and multifunctional submersible pump Hailea HX-2500 with a flow rate of up to 650 l/h and a maximum head of ~1.3 m, with a built-in mixer for air intake — suitable for hydroponic systems and solution circulation.

Detailed features

• Model: HX-2500 — submersible water pump with a fixed flow rate of 650 l/h ­
• Maximum head: ~ 1.30 m ­
• Power supply / voltage: 230 V / 50 Hz ­
• Power: 12 W ­
• Outlet diameter / connection: 14.5 mm
• Shaft / axle: stainless steel, suitable for fresh and salt water ­
• Housing: ABS plastic, corrosion-resistant
• Built-in mixer / attachment for oxygenating the solution (O₂) ­
• Installation: rubber suction feet for securing to surfaces, ensuring stability during submerged operation ­
• Operation at a low water level — ability to function with limited water supply ­

Recommendations for use

• Install the pump on a flat surface using the rubber suction feet to minimise vibrations.
• Use a hose with an internal diameter of ~ 14.5 mm (or a suitable adapter) for the outlet to maintain the stated flow rate.
• Use the built-in mixer / Venturi system to add air to the solution — it improves oxygen content and stimulates root growth.
• Cleaning the intake cover / filter — periodically remove debris to protect the pump from clogging and reduced flow.
• Do not allow the pump to run dry: it must be at least partially submerged or connected to a water flow.
• When using nutrient solutions (especially with fertilisers), check material compatibility (ABS housing, stainless steel) with the concentrations.

Benefits

Hailea HX-2500 is a compact yet feature-rich pump with a flow rate of 650 l/h and a head of ~1.3 m. It provides stable operation in low-water environments, a built-in mixer for solution aeration, and a design suitable for hydroponic systems and circulation. Its small size and low power consumption make it a suitable choice for systems with limited space and specific needs.

The BOYU FP-5000 submersible water pump, with a flow rate of 5000 L/h, is suitable for all hydroponic systems and systems that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its intelligent design.

• voltage: 230V, 50/60Hz
• Power: 85W
• Maximum head height: 4.5 m
• Maximum flow rate: 5000 L/h
• Outlet diameter: ⌀ 25 mm
• Dimensions: 162 x 133 x 209 mm

Compact and efficient Hailea HX-800 submersible pump with adjustable flow rate up to 285 l/h and maximum head of about 0,5 m – suitable for aquariums, hydroponics and small circulation systems.

Detailed features

• Flow rate: 285 l/h.
• Power: 3 W.
• Maximum head: 0,5 m.
• Power supply: 220-240 V / 50-60 Hz.
• Outlet diameter: 9 mm.
• Dimensions: 55 × 65 × 80 mm.
• Weight: approximately 0,22 kg.

Design and features:

• Housing made of ABS plastic, resistant to corrosion and aggressive
• Shaft: stainless steel, suitable for fresh and salt water.
• Built-in adjustable flow controller
• Rubber suction feet for installation – to secure it to surfaces
• Ability to operate at low water level

Recommendations for use

• Secure the pump to a smooth surface using the rubber suction feet to minimise vibration.
• Use a hose or pipe matching the outlet diameter (e.g. 9 mm), or an adapter.
• Adjust the flow rate as needed using the built-in controller.
• Clean the intake cover / filter regularly to prevent clogging and reduced flow.
• Never allow the pump to run dry – make sure it is always in contact with water.
• When using nutrient solutions or aggressive liquids, check material compatibility (ABS, shaft, seals).

Benefits

Hailea HX-800 offers a good balance between size and performance – despite its compact dimensions, it delivers 285 l/h and can be adjusted to suit the system's needs. Its low power consumption makes operation economical, while its construction is reliable and resistant to different water environments.