Lighting

Agrolite 4.30 E27 120W – LED lamp

Agrolite 4.30 LED is an innovative lighting product with four adjustable 30W panels, for a total output of 120W. The lamp's geometry, high efficiency, and low heat output make it the ideal light fixture for the stages of germination, growth and flowering.

• purpose: for growth and flowering
• power: 120W
• efficiency: 2.2 µmol/J
• lifespan: 20,000 hours
• socket: E27

Note: the lamp is sold without a socket!

You can buy a socket here!

Warning: do not use with dimmers!

Technical specifications:

Rope Ratchet Neptune – accessory

Rope Ratchet is asuspension system for reflectors. It allows you to quickly and easily adjust the height of the lights.

• supports up to 68 kg.
• when pulled tight, the Rope Ratchet ropes lock in place and cannot slip; the housing cannot break or rust - made from a special composite material
• heat- and cold-resistant
• the set includes 2 x 1.6 m polypropylene ropes
• the set includes 4 carabiners

Diamond Foil 125 µm – 1.25 m per meter

Diamond Lightite reflective foil has a raised diamond-shaped diffusing structure to distribute light more evenly over the plant canopy. It also provides maximum reflection of light lumens. With a PET-coated membrane to dramatically increase strength and reduce the chance of creasing.

• Width: 1.25m
• Thickness: 125μm

• Premium foil
• 5-layer
• Diamond embossing for light diffusion
• 100% lightproof

Solux i-Clone 2×20W – LED for seedlings

🔹 Solux i-Clone 2x20W LED Tube is high-quality lighting designed to provide optimal illumination for rooting cuttings and maintaining mother plants. With its full-spectrum lighting and the ability to connect up to 10 tubes in series, this product offers flexibility and efficiency for any indoor garden.

🔹 Detailed specifications:

• Manufacturer: Solux
• Model: i-Clone 2x20W LED Tube
• Type of lighting: LED tube with two 20W LEDs
• Color temperature: 6500K (suitable for vegetative growth and flowering)
• Light efficacy: 2.4 μmol/s per watt
• Product lifespan: 55,000 hours
• Dimensions: 120 cm long
• Weight: 330 g
• IP rating: IP65 (resistant to dust and moisture)
• Connection: Can connect up to 10 tubes in series via IP65 input/output
• Package contents: 2 LED tubes, power cable, mounting brackets

🔹 Recommendations and instructions for use:

1. Choose a suitable location for installing the tubes, ensuring good light distribution.
2. Use the included mounting brackets to attach the tubes to a wall or ceiling.
3. Connect the tubes in sequence using the IP65 input/output connectors to link up to 10 tubes in series.
4. Connect the power cable to the first tube and plug it into the mains.
5. Adjust the lighting to suit the plants’ needs, providing an appropriate photoperiod and light intensity.

✅ Benefits:

• Improved rooting: Stimulates fast, healthy rooting of cuttings.
• Maintaining mother plants: Provides optimal conditions for keeping mother plants healthy.
• Flexibility: Can connect up to 10 tubes in series, making it easy to expand the lighting system.
• Energy efficiency: Low energy consumption and a long product lifespan.
• Durability: IP65 protection against dust and moisture, suitable for various indoor environments.

Stucco – reflector with E40 socket

The textured Stucco Reflector is a low-cost open-type reflector (natural dissipation of heat from the bulb).

• made of textured polished aluminum
• dimensions L/W/H: 47 x 38 x 11.5cm.
• ceramic socket: E40 (included)
• suitable for: 250W, 400W, 600W MH / HPS bulbs

LUMii BLACK Dual Spec 600W – HPS lamp

The LUMii BLACK 600W HPS Lamp is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• luminous flux:88,000 Lm
• efficiency: 147 Lm/W
• color temperature: 2000 K
• lifespan: 20,000 h
• socket: E40

Note:to ignite the lamp, it is necessary to connect it to a choke and ignitor or electronic ballast, which are sold separately (you can purchase them here*).

Recommendations:

• Connect to the mains using a suitable ballast.
• Keep at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To get the most out of sodium lamps, it is recommended not to use them for more than one year.

Warning:

• Electric shock hazard - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental legislation!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp switching on and off periodically or significant changes in color or brightness - the lamp must be replaced immediately!

Sylvania GroLux 600W – HPS lamp

Sylvania GroLux SHP-TS 600W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• amperage: 5.5A
• luminous flux:90,000 lm, 200,000 Phyto-lm
• efficiency: 150 lm/W
• color temperature: 2050 K
• lifespan: 26,000 h
• socket: E40

Detailed specifications:here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Keep at least 60 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To get the most out of sodium lamps, it is recommended not to use them for more than one year.

Caution:

• Electric shock hazard - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and an appropriate device!
• Damaged lamps may emit hazardous radiation and cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp turning on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

E27 lamp holder with cable Universal and easy to install, this lamp holder is ideal for lighting solutions at home and in the office. Compatible with all E27 bulbs. The white E27 lamp holder with cable is the perfect choice for anyone looking for a reliable and stylish lighting solution. With its standard E27 size, it is compatible with a wide range of bulbs and is easy to install thanks to the included cable. Its elegant white design fits perfectly with a variety of interior styles, while its quality materials ensure durability and reliability. The lamp holder is suitable for both home and office use, offering flexible lighting options.

Sylvania GroLux 400W – HPS lamp

Sylvania GroLux SHP-TS 400W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 400W
• luminous flux: 58,000 lm, 128,000 Phyto-lm
• efficiency: 145 lm/W
• color temperature: 2050 K
• life: 26,000 hours
• socket: E40

Note:to ignite the lamp, it must be connected to a choke and ignitor or electronic ballastrequired, which are sold separately (you can purchase them from here*).

Detailed specifications:here*

Recommendations:

• Connect to the mains via a suitable ballast.
• Position at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To achieve maximum efficiency from sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable fixture!
• Damaged lamps can emit dangerous radiation and may cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental legislation!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps should be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp turning on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

HortiLight Light SET 600W – kit

HortiLight Light SET 600W is a complete lighting kit for indoor growing. The kit consists of:

• HortiLight 600W magnetic ballast 1 pc.
• dual-spectrum bulb HortiLight SHP 600W dual 1 pc.
• Stucco reflector 1 pc.

E40 socket with mounting plate, no cable The E40 socket with mounting plate is an extremely practical and reliable product, designed to provide a secure and stable connection between your bulb and the power supply. This socket is compatible with all types of light sources with an E40 screw base. The E40 socket is made from high-quality, durable materials such as ceramic and metal, which withstand high temperatures and offer years of use without wear or deformation. The metal mounting plate attached to the socket allows for easy and secure installation on various surfaces. Using this socket with a mounting plate makes it quick and easy to connect your light sources. Thanks to its standard E40 size, it is universal and suitable for many types of lights, including halogen, LED, fluorescent, and more. Including the mounting plate in the product design makes installation easier and provides extra stability, especially in heavy-duty or complex installations. In addition, the plate allows the socket to be mounted vertically or horizontally, offering flexibility and the ability to customize it to suit your needs and preferences.

Secret Jardin Cosmorrow Power 20W

Secret Jardin Cosmorrow Power 1x20W is a power supplyfor one20W LEDstrip from the Cosmorrow series.

• power: 20W
• voltage: 100-220V
• frequency: 50/60 Hz
• weight: 0.35 kg
• protection: IP54

PowerPlant Superveg 600W – MH lamp

Metal halide / MHbulb / lamp for the growth / vegetative stage.

Metal halide lamp, suitable for plants in the vegetative stage. Connect to a 600W ballast.

Improved output in the blue spectrum for vigorous growth.

• Socket: E40
• Coverage area: 1.44 m²
• Light output: 51,000 Lm
• Efficiency: 85 Lm/W
• Lifetime: 10,000 hours
• Color temperature: 4000 K

Note:to ignite the lamp, it must be connected to a choke and ignitor or an electronic ballast, which are sold separately (you can buy them here*).

Warning:

• The cable connecting the ballast to the reflector should be no more than 2 m long!

LUMii Digita 600W – electronic ballast

LUMii Digita 600W Electronic Ballast is an electronic/digital ballast/choke with dimming capability (reducing or increasing the power) for 600W high-pressure sodium (HPS) or metal halide (MH) lamps/bulbs. LUMii Digita 600W Electronic Ballast is an electronic choke with a built-in microprocessor that controls the unit and operates at a higher frequency than standard analog chokes. Greater efficiency means more light for your plants. It allows the bulb to ignite quickly, thereby saving energy. Quieter than any other choke. Measurements indicate up to 30% greater brightness than analog chokes. An electronic choke solves the problem of irregular mains voltage! Analog chokes age over time, become noisy and consume more electricity, heat up more and more, while their light output decreases. This does not happen with electronic chokes; they maintain the same level of light output and efficiency. To ensure safe operation, the LUMii ballast is programmed to switch off in the event of a short circuit, if the bulb burns out, or if no bulb is present.

​

• operating modes with a 600W lamp/bulb: 250W, 400W, 600W
• operating modes with a 400W lamp/bulb: 250W, 400W, do not dim above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not dim above 250W
• Supply voltage: 220–240V 50Hz
• Amperage: 1.8A
• Input power: 620W
• Output power: 600W
• Efficiency: >0.99 THD
• Harmonic distortion: <10%, Imax:Iavg. <1.7
• Ambient temperature: from -25°C to 70°C
• Temperature rise (Δt): 29°C
• Protection rating: >IP23
• ​Dimensions L/W/H: 43/38/18.5cm
• Weight: 3.125kg

Disconnect the power supply when changing the lamp!

LUMii BLACK Reflector

The LUMii BLACK Reflector includes:

•  5 m cable 
•  E40 socket

Dimensions:

• Height: 130 mm 
• Width: 380 mm
• Length: 510 mm

Easy Rollers – accessory

With Easy Rollers you can quickly and easily adjust the height of your lights.

• support up to 10kg.

Sylvania GroLux 250W – HPS lamp

Sylvania GroLux SHP-TS 250W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering stage.

• for growth and flowering
• Power: 250W
• Amperage: 2.6A
• Luminous flux: 34,000 lm, 75,500 Phyto-lm
• Efficiency: 136 lm/W
• Color temperature: 2050 K
• Lifespan: 26,000 h
• Socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (you can purchase them here*).

Detailed specifications:here*

Recommendations:

• Connects to the mains through a suitable ballast.
• Position at least 40 cm from the plant tops!
• Recommended ambient temperature: 25°C
• To get the maximum performance from sodium lamps, it is recommended that they be used for no more than one year.

Caution:

• Risk of electric shock - disconnect the power before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable fixture!
• Damaged lamps may emit hazardous radiation and can cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp’s life - characterized by the lamp switching on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

Secret Jardin Cosmorrow Power 40W

Secret Jardin Cosmorrow Power 1x40W is a power supply for one 40W LED strip from the Cosmorrow series.

• power: 40W
• voltage: 100-220V
• frequency: 50/60 Hz
• weight: 0.70kg
• protection rating: IP54

LUMii CFL Warm White 130W – 2700K

Compact fluorescent lamp (CFL) for flowering, with a built-in electronic ballast (plugs directly into the mains using an E40 socket). It does not generate much heat and can be placed very close to the plants.

• Socket: E40
• Luminous flux: 6300 Lm
• Efficiency: 48 Lm/W
• Lifespan: 10,000 hours
• Color temperature: 2700 K
• Suitable for supplemental lighting, side lighting, mother plants and clones
• Minimal heat emission

• Do not touch the glass part of the lamp with your hands! 
• Do not overtighten in the socket!
• Ensure adequate ventilation!
• Do not use the lamp if it is wet! 
• Do not use in light fixtures with power adjustment (dimmer)!
• Do not use in enclosed light fixtures!

Garden Highpro PROCUFS, a pair of suspension collars, up to 84 kg

Garden Highpro PROCUFS create attachment points for a suspension system on a tubular frame. They are used with suitable hangers when installing equipment such as reflectors and carbon filters.

Features and purpose

• Set: two collars, one pair.
• For tubes with a diameter of up to 5 cm, equivalent to 50 mm.
• The manufacturer specifies a load capacity of up to 84 kg per pair.
• They are an accessory for a suspension system, not a standalone height-adjustment mechanism.

Helpful tips for choosing and using

Measure the tube and check its load capacity, as well as that of all other fasteners.

Position the collars according to the frame shape and attach the compatible suspension system.

Distribute the load between the two points and check all connections before letting go of the equipment.

Important information for use

• 84 kg is the specified capacity for the pair, not for each individual collar.
• The permissible load of the entire installation is limited by its weakest component. The frame may support a lower load.
• Do not use damaged collars or unsuitable attachment points.

More garden accessories

Browse all gardening accessories and tools.

LUMii BLACK 600W – electronic ballast

LUMii BLACK 600W Electronic Ballast is an electronic/digital dimmable ballast (for reducing or increasing the power) for 600W high-pressure sodium (HPS) or metal halide (MH) lamps/bulbs. 

• 4 operating modes: 250W, 400W, 600W, 600W boost (+10%)
• aluminum housing with wall-mounting option.
• cable with Schuko plug for connecting to the mains
• IEC connector (computer-style) for connecting the lamp
• Voltage: 240V
• Amperage: 2.9A
• Power cable: 2 m
• Dimensions L/W/H: 29/12/6 cm
• Weight:3 kg
• Warranty: 1 year

The electrical fuse is located under the power connector - please check the fuse if the ballast is not working!

• operating modes with a 600W lamp/bulb: 250W, 400W, 600W, 600W boost (+10%)!
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W

Disconnect the power supply when changing the lamp!

Schuko Power Cable 2 m – 3×1,5 mm² 3 x 1.50 sq. cable - 2 m with plug

Cosmorrow 20W PPE 2.7 – Growth LED

Secret Jardin Cosmorrow LED 20W PPE2.7 L50cm Growing is a single LED bar for the growth phase of indoor-grown plants. Power supply is not included - sold separately! You can purchase it here!

• for growth
• power: 20W
• voltage: 24V
• efficacy: 2.7µmol/s
• color temperature: 6500K
• coverage area: 60 x 40cm (when suspended 15cm from the tops of the plants)
• water resistance: IP65
• warranty: 1 year

Technical specifications:

• for growth
• power: 20W
• voltage: 24V
• amperage: 0.83A
• efficacy: 2.7µmol/s
• color temperature: 6500K
• coverage area: 60 x 40cm (when suspended 15cm from the tops of the plants)
• water resistance: IP65
• dimensions: 47 x 3.2 x 1.5cm
• weight: 0.16kg

LUMii CFL Warm White 200W – 2700K

Compact fluorescent lamp (CFL) for flowering, with a built-in electronic ballast (connects directly to the mains via an E40 socket). It does not get very hot and can be placed very close to the plants.

• Socket: E40
• Luminous flux: 8050 Lm
• Efficiency: 40 Lm/W
• Lifespan: 10,000 hours
• Color temperature: 2700 K
• Suitable for supplemental lighting, side lighting, mother plants and clones
• Minimal heat output

• Do not touch the glass part of the lamp with your hands! 
• Do not overtighten in the socket!
• Ensure adequate ventilation!
• Do not use the lamp if it is wet! 
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

Black-and-white film 85 µm – 2 m per meter

Double-layer black / white film 85μm 2m / 1m. The price is for 1 linear meter.

• thickness: 85μm
• width: 2m
• length: 1m

LUMii Green LED Head Torch – green light

LUMii Green LED Head Torch is a headlamp with green light, ideal for checking your garden without interrupting the photoperiod (during the plants' dark period).

• Three operating modes - full, partial, and strobe (flashing light)
• 6green LEDs
• Operates on 3 AAA batteries (not included)
• Compact, lightweight design

LUMii BLACK 600W – lighting kit

LUMii Black 600W Setindoor grow lighting kit which includes:

• bulb / lamp: dual spectrum  LUMii BLACK 600W1 pc.
• ballast: digital LUMii BLACK 600W1 pc.
• reflector: open Stucco1 pc.

Warning: the kit does not include a cable from the ballast to the reflector!

Lumatek ATS 200W PRO 2.5 – LED light

• Light spectrum: full spectrum +
• High efficiency: up to 2.5µmol/J
• PPF: 508µmol/s
• power (100%): 205W
• Coverage area: up to 0.8 x 0.8m
• Waterproof: IP65
• Lifespan: + 60,000 hours
• Light source: high-quality white, red and far-red diodes
• Five different operating modes: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Dimensions: 524.5 x 524.5 x 71.6mm
• Weight: 4kg
• Warranty: 3 years

LUMii GrowRoom Lenses – accessory

LUMii protective glasses for inspecting plants under HPS lighting. As well as protecting your eyes, they make it easier to identify early signs of nutrient deficiencies or pest infestations without having to turn off your lights. LUMii protective glasses feature a specially designed blue lens that corrects the orange tint of sodium lamps and creates the effect of natural daylight. This lets you see the true colors of your plants - leaves, fruits, and flowers.

• protect eyes from ultraviolet (UV) and infrared (IR) rays
• normalize the spectrum

Maxibright Warpdrive 600W – ballast

Maxibright Warpdrive 600W Power Pack is a budget electronic ballast designed for use with 600W high-pressure sodium (HPS) or metal halide (MH) lamps/bulbs. It does not have a "dimming" function (increasing or decreasing the power)!

• operates silently
• extremely lightweight and compact
• works with HPS and MH bulbs

Note: the product is supplied with a UK plug* (UK-standard plug) and IEC-14 female connector*!

Features:

• power: 600W
• dimming capability: none
• ​voltage: 240V
• frequency: 50/60Hz
• Imax: 3.5A
• weight: 1.135kg
• dimensions: 241/100/60mm
• warranty: 1 year

Note: the product is supplied with a UK plug* (UK-standard plug) and IEC-14 female connector*!