Heat Mats and Thermostats

ROOT!T – heat mat thermostat

ROOT!T Thermostat for Heat Mat is an electronic device that gives you full control over the temperature in the root zone during germination / rooting. By switching the heating mats on and off, the device maintains the set desired temperature precisely (10-30ºC). Compatible with all ROOT!T heating mats.

• Maintain the optimal temperatures for your plants!
• Easy to switch on!
• Easy to use and control!
• sensor cable length: 1.8m.
• max. load: 1000W / 4.3A

Preparing for operation:

1. Place the temperature sensor in the propagator or the area to be heated. It can be hung using the rubber suction cup or placed in the substrate (photo 3).
2. Place the thermostat outside the propagator or growing area - the thermostat and output socket must always be kept in a dry place! DO NOT IMMERSE IN WATER OR LIQUIDS!
3. Plug the heating mat or other heater into the output socket.
4. Connect the thermostat to the power supply - the POWER indicator should light up.
5. Continue to set the desired temperature to maintain.

Setting the thermostat:

The display shows the current temperature at the sensor. Press UP to display degrees Fahrenheit ºF or DOWN to display Celsius ºC - the corresponding indicator will light up.

1. Press the SET button to display the desired temperature; after 3 seconds, it will return to the current temperature.
2. Press and hold the SET button for 3 seconds; the display will start flashing - press UP or DOWN to select the desired temperature to maintain.
3. Press SET again to return to displaying the current temperature. Leave it, and it will return to displaying the current temperature after 30 seconds.

The HEATING indicator will light up if the current temperature is lower than the desired temperature - the heating mat / heater is now operating ON. The HEATING indicator will not light up if the current temperature is higher than the desired temperature - the heating mat / heater is not operating now OFF.

ROOT!T 40×60 cm - heating mat

ROOT!T Medium Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is key to success in the early stages, when young plants are at their most delicate and vulnerable. 

• Dimensions W/D: 40x60cm.
• Speeds up seed germination or clone rooting by whole days.
• Warms the root zone by 5.5-11˚C above the ambient temperature.
• Fully waterproof, scratch-resistant, and durable.
• To set your desired precise temperature, use together with the ROOT!T thermostat for heating mats.

Instructions for use:

1. Place the heating mat on a thoroughly dried surface.
2. For best results, place the mat on an insulated surface, not directly on a cold floor.
3. Place the tray with seedlings (seeds, clones) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains (220-240V).
5. This heating mat is designed to warm the root zone by 5.5-11˚C above the ambient temperature.

Caution:

• Improper use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly in the tray / propagator, and do not cover it with soil or other growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

Heating Mat 50×25 cm – with Thermostat

Heating mat for mini nurseries, 50/25 cm, with thermostat

Brief description:

• Optimal control: Maintains the ideal temperature for germination and growth.
• Thermostat included: Easy adjustment and precise temperature control.
• Ideal for beginners: Suitable for mini nurseries and home gardens.

Detailed description:

Improve conditions for your seedlings with a 50/25 cm heating mat paired with a precise thermostat for temperature control. This set is perfect for beginner and experienced gardeners, providing optimal conditions for seed germination and seedling development.

Features:

• Dimensions: 50/25 cm – ideal for small nurseries.
• Thermostat included: Precise temperature control for even heating.
• Convenient: Easy to install and operate, suitable for home use.
• Energy efficient: Maintains a stable temperature with low energy consumption.
• Versatile: Suitable for all kinds of seeds and plants.

ROOT!T 40×120 cm – heat mat

ROOT!T Large Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is a key factor for success in the early stages, when young plants are at their most delicate and vulnerable. 

• Dimensions W/L: 40x120cm.
• Speeds up seed germination or cloning rooting by whole days.
• Warms the root zone by 5.5-11˚C above the ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T thermostat for heat mats.

Instructions for use:

1. Place the heating mat on a thoroughly dry surface.
2. For best results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the tray of seedlings (seeds, clones) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the power supply (220-240V).
5. This heating mat is designed to warm the root zone by 5.5-11˚C above the ambient temperature.

Warning:

• Improper use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly inside the tray / propagator or cover it with soil or other growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

ROOT!T 25×35 cm – heating mat

ROOT!T Small Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is key to success in the early stages, when young plants are at their most fragile and vulnerable.

• Dimensions W/L: 25x35cm.
• Speeds up seed germination or rooting of cuttings by whole days.
• Warms the root zone to 5.5-11˚C above the ambient temperature.
• Completely waterproof, scratch-resistant, long-lasting.
• To set your desired precise temperature, use it together with the ROOT!T heating mat thermostat.

Instructions for use:

1. Place the heating mat on a thoroughly dried surface.
2. For best results, place the mat on an insulated surface, not directly on a cold floor.
3. Place the tray with seedlings (seeds, cuttings) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the power supply (220-240V).
5. This heating mat is designed to warm the root zone to 5.5-11˚C above the ambient temperature.

Caution:

• Incorrect use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly in the tray/propagator or cover it with soil or other growing media!
• Do not cover the mat with insulating materials, as this may cause overheating!
• Do not immerse in water!

VDL 30W 55×35 cm – heating mat

🔹  30W VDL Heating Mat - measuring  55x35 cm. is an electric heating mat designed to maintain optimal temperature conditions for seed germination, rooting cuttings, and growing sensitive plants. It provides precise temperature control, which is especially useful in cold conditions.

🔹 Detailed specifications:

• Dimensions: 55x35 cm
• Power: 30 W
• Material: Flexible, moisture-resistant PVC surface
• Application: Suitable for use under pots, in nurseries, or in greenhouses
• Manufacturer: VDL

🔹 Recommendations and instructions for use:

1. Place the mat on a flat, dry surface.
2. Place the pot or container with plants on the mat.
3. Connect the heating mat to the power supply.
4. Check the soil moisture periodically and water as needed.

✅ Benefits of use:

• Improved germination: Provides warmth that speeds up seed germination.
• Healthy growth: Promotes rooting in cuttings and growth in young plants.
• Economical: Low energy consumption (30 W).
• Versatility: Suitable for various plant types and growing conditions.

The VDL Heating Mat with controller is a high-quality heating mat designed for seed germination, rooting cuttings, and growing seedlings. Thanks to the built-in controller (potentiometer), you can easily set the desired temperature, providing optimal conditions for rapid root system development and a higher germination success rate.

The VDL Heating Mat with thermostat is a practical solution for maintaining a stable temperature in mini greenhouses, seedling trays, and pots during colder periods. Warming the root zone speeds up seed germination and promotes strong, healthy root development in cuttings when the ambient temperature is below optimal.

The mat is made from high-quality, durable materials, making it flexible, resistant, and easy to store. After use, it can be rolled up without taking up unnecessary space. Place it under a mini greenhouse, seedling tray, or pots to ensure even heat distribution across the entire surface.

The built-in analog controller allows you to smoothly adjust the heat output to suit the needs of different plants. This makes the mat suitable for a wide range of crops - from vegetable seedlings and ornamental plants to more demanding species that need higher temperatures for successful germination or rooting.

Technical specifications

✔️ Manufacturer: VDL

✔️ Type: Heating mat with controller

✔️ Size:55 × 35 cm

✔️ Power:30 W

✔️ Temperature control: Yes (potentiometer)

✔️ Flexible design

✔️ Rolls up for easy storage

✔️ Not waterproof / do not immerse in water

📦 Package includes

✔️ 1 × VDL 30W heating mat

✔️ 1 × Built-in power controller

✔️ User guide.

Benefits

✔️ Adjustable temperature to suit plant needs

✔️ Speeds up seed germination

✔️ Stimulates the development of a healthy root system

✔️ Suitable for rooting cuttings

✔️ Provides even heating

✔️ Lightweight, flexible, and easy to store

✔️ Suitable for home and professional use

✔️ Ideal for mini greenhouses and propagators.

🔧 Applications

Suitable for:

• Seed germination

• Rooting cuttings

• Seedling production

• Mini greenhouses

• Seedling trays

• Animal heating

• Vegetables

• Terrariums

• Flowers

• Greenhouses.

📋 Instructions for use

1. Place the heat mat on a flat, dry and stable surface.
2. Place a mini greenhouse, seedling tray or pots on it.
3. Connect the mat to the power supply.
4. Set the desired heat level using the built-in control.
5. Monitor the temperature in the mini greenhouse and adjust the setting as necessary.
6. After use, unplug the device and store it rolled up in a dry place.

⚠️ Important: The mat is not designed to be immersed in water. Do not use it on sharp or uneven surfaces and do not cover it with insulating materials, as this may cause overheating.

💡 Tip from Urban Botaniks: For the highest germination rate, combine the heat mat with a quality mini greenhouse and a thermometer/hygrometer. Maintaining a stable temperature in the root zone significantly speeds up germination and improves the development of young plants.

ROOT!T 25×35 cm – Insulating MatInsulated mat measuring 350 mm x 250 mm. This mat is placed under a heated propagator mat. It ensures that all the heat produced is directed upwards to the propagator and is not lost.

VDL 15W 35×20 cm – heating mat with thermostat

🔹 15W VDL Heating Mat - measuring 35x20cm. is an electric heating mat designed to maintain optimal temperature conditions for seed germination, rooting cuttings, and growing sensitive plants. It provides precise temperature control, which is especially useful in cold conditions.

🔹 Detailed specifications:

• Dimensions: 35x20 cm
• Power: 15 W
• Material: Flexible, moisture-resistant PVC surface
• Application: Suitable for use under pots, seedling trays, or in greenhouses
• Manufacturer: VDL
• Thermostat: Thermostat included

🔹 Recommendations and instructions for use:

1. Place the mat on a flat, dry surface.
2. Place the pot or plant container on the mat.
3. Connect the mat to the power supply.
4. Check the soil moisture regularly and water when necessary.

✅ Benefits:

• Improved germination: Provides warmth that speeds up seed germination.
• Healthy growth: Stimulates root development in cuttings and the growth of young plants.
• Economical: Low energy consumption (15 W).
• Versatility: Suitable for different types of plants and growing conditions.