Clear hose, outer Ø 18 mm, inner Ø 16 mm, 1 m

Flexible silicone-plastic hose, 18 mm Ø, transparent, suitable for air and water systems - easy to install and monitor flow.

Detailed specifications

• Inner diameter (ID): ~ 18 mm
• Material: PVC with silicone softening or a similar polymer - flexible, durable, and transparent.
• Construction: reinforced / with yarn or braided reinforcement for greater strength and resistance to kinking.
• Length: from 1 m to 100 m.
• Outer diameter and thickness: similar products have values of around 1.16″ outer diameter and wall thickness (≈ 3.97 mm).
• Maximum working pressure: 145 psi (~ 10 bar) at standard temperature (~ 21 °C).
• Burst pressure: up to ~ 450 psi (~ 30 bar)
• Minimum bend radius: approximately 8″ (~ 203 mm) to prevent the hose from deforming easily.
• Temperature range: from –20 °C to +66 °C.
• Reinforcement / hardness: approximately 73A (wall hardness).
• Resistance: UV-resistant (for outdoor use), chemically resistant to many liquids and oils.

Usage recommendations

• During installation, leave a little slack (or an S-shaped bend) to allow movement and prevent strain due to temperature changes.
• Avoid sharp twisting or bending at an acute angle - maintain the bend radius (~ 8″) for long-lasting performance.
• The incoming / airflow must not exceed the recommended flow rate for the hose, or the maximum pressure may be exceeded.
• Excessively high pressure increases the risk of bursting - regularly check fittings and hoses for cracks.
• If the hose is used for air, do not let dust or fibers enter the interior - inlet filtration is recommended.
• Periodically check the hose’s clarity and integrity. If it becomes cloudy, cracked, or faded, replace that section.

Benefits

This flexible 18 mm Ø silicone hose offers an ideal solution for distributing air or water - well balanced between flexibility and strength, with specifications suited to professional and hobby systems. Its transparent design makes it easy to identify and visually monitor the flow.

Sizes and connections

Match the inner and outer diameters to the connector type. Check whether the length is sold by the meter or as a full roll, and cut the end straight before connecting.

Browse hoses and tubes.