Timers and Controllers

The controller continuously maintains the set temperature and prevents operation below the specified minimum speed or above the permitted maximum speed.

🔹LUMii XLED Controller – EU Plug is a high-quality controller designed to control LED lighting with a 0-10V signal. It allows precise adjustment of the photoperiod and light intensity, as well as sunrise and sunset simulation, ensuring optimal conditions for plant growth.

🔹 Detailed specifications:

Manufacturer: LUMii

Model: XLED Controller – EU Plug

Signal type: 0 – 10 V

Number of channels: 1

Maximum number of connected devices: 25 LUMii XLEDv6 680W LED lights

Output voltage: 0 – 10 V ± 0.1 V

Adapter input voltage: 120 – 240 V AC

Controller input voltage: 12 V DC, 1.0 A

Operating temperature: 0°C – 35°C

Operating humidity: up to 80% RH, non-condensing

Protection rating: IP20

Installation: Wall-mounting or hanging option

Included accessories: EU plug adapter

🔹 Recommendations and instructions for use:

Connect the controller to the power source using the supplied adapter.

Use an RJ12 cable or connect directly to the push-in terminals to connect to the LED lights.

Set the desired photoperiod, light intensity, and sunrise and sunset simulation parameters via the 5-button interface.

The controller will control the connected devices, ensuring optimal conditions for plant growth.

✅ Benefits of use:

Precise control: Allows adjustment of the photoperiod and light intensity, as well as sunrise and sunset simulation.

Multiple devices: Can control up to 25 connected LED lights.

Ease of use: Intuitive 5-button interface for easy configuration.

Flexibility: Compatible with any LED lighting that accepts a 0-10V signal.

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12 × 600 W inductive loads.

Standard version – single-phase, with 3 power cables.


Dimensions and technical data:

230 × 300 × 110 mm
230 V / 50 Hz
24 h timer with 36 h battery backup, adjustable in 30 min intervals.
4 × 16 A 230 V
protection class: IP40

Compatibility with 1000 W ballasts and lamps:

circuits: 3 × 16 A
With magnetic ballast: 6 × 1000 W
With electronic ballast: 9 × 1000 W

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 12x600W inductive loads.

Variant "+heating" switches on 1 load when the lights are off.


Dimensions and technical specifications:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and bulbs:

circuits: 3 x 16A
With magnetic ballast: 6 x 1000W
With electronic ballast: 9 x 1000W

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 6x600W inductive loads.

The "+heating" version includes 1 load when the lights are switched off.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with a 36h battery backup, adjustable in 30min increments.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

The TechGrow S-2 CO2 sensor (2000ppm) measures CO₂ and detects light. It is compatible with all TechGrow controllers. The sensor is equipped with a built-in calibration function, allowing you to calibrate the CO₂ sensor against outside air. The calibration menu is accessible only through a CO₂ controller. It is also equipped with a built-in switch to prevent unwanted calibration.

• measurement range: 0 - 2000 ppm 

Almost all TechGrow controllers and sensors are compatible with one another, optimising ease of use and making expansion affordable. Recently, TechGrow began supplying controllers and sensors separately, so that you can mix and match controllers and sensors as required. This makes it possible to combine three different controllers with one sensor, for example a CO₂ controller, a climate controller and Humi Dual, using only an S-4 sensor. All values measured by your sensor can be saved on the TechGrow Datalogger DL-1. To find out which sensor is compatible with your TechGrow controller, see your controller manual. Every Pro Series controller displays current CO₂, temperature and humidity values, and also records min / max values.

A reliable, easy-to-set-up water timer for a single irrigation zone — it automates watering in a garden, greenhouse, or on a balcony, so plants receive water regularly without manual intervention.

• Type: 1-zone digital water timer.
• Operating pressure: 0.5–8 bar (≈ 7–116 PSI).
• Maximum flow rate (throughput): up to 35 L/min.
• Watering duration: from 1 to 240 minutes (up to 4 hours).
• Watering frequency: every 1–12 hours or at intervals of 1–7 days — selected according to plant needs.
• Power supply: 2 × AA (1.5 V) batteries.
• Operating temperature range: 3 °C–50 °C.
• Valve / connections: standard threads for tap and hose.
• Low-battery indicator and frost protection — at temperatures below ~3 °C, the device should be removed to prevent damage.
• Operating modes: automatic (scheduled), manual watering (without changing the main schedule), and a "Rain-Delay" option (postponement in rain/high humidity).

Recommendations for use

• Install the timer on a standard garden tap or hose, before the pipe/hose leading to the plants.
• Set a schedule: choose a convenient start time, duration, and frequency — this allows regular watering without manual intervention.
• When you are away or have an unpredictable schedule, the timer ensures that plants receive water even when you are not there.
• For winter: remove the device if frost is expected — the water inside may freeze and damage the housing.
• Maintain normal pressure (0.5–8 bar) and good flow rate — excessively low or high pressure, or clogged filters, can disrupt watering.

TechGrow Sensor Temp/RH measures temperature and humidity (RH), while also detecting light. These values are displayed on your controller's screen. TechGrow Sensor Temp/RH can be connected to various devices. Depending on your TechGrow controller, the sensor will control temperature and/or humidity. The built-in light sensor can be switched off when using an S-2 sensor or a T-Mini CO₂ controller.

Almost all TechGrow controllers and sensors are compatible with one another, optimizing ease of use and keeping expansion affordable. Recently, TechGrow started offering controllers and sensors separately, so you can mix and match them as needed. This makes it possible to combine three different controllers with one sensor, e.g. a CO₂ controller, a climate controller and Humi Dual, using only an S-4 sensor. All values measured by your sensor can be saved on the TechGrow Datalogger DL-1. To find out which sensor is compatible with your TechGrow controller, refer to your controller manual. Each Pro Series controller displays the current CO₂, temperature and humidity values, and also records min/max values.

TechGrow Clima Control ECO 15A can control up to 2 fans and precisely create the right climate in your space. It ramps up more slowly than other controllers to achieve a more stable climate. The controller is extremely easy to use: the rotary knobs let you set the desired temperature and hysteresis, as well as the minimum and maximum fan speed. Modern software takes care of the rest!

main functions

• controls and displays: temperature
• day/night detection: no
• light sensor: no
• thermal relay: no
• temperature alarm: no

software features

• temperature range: 10 - 45°C
• temperature hysteresis: 0 - 7°C
• temperature settings: day
• humidity settings: no
• day/night delay: no
• min./max. values: no

power supply

• power supply: 100 - 240V
• power consumption: 3W
• fuse: 15A
• max. load: 3400W
• power cable: 3 x 1.5 / 1.7m

The fans are regulated automatically according to the settings. Once you set the desired temperature, the Clima Control Eco 15A will always maintain it. When the temperature exceeds "set point + hysteresis", the fan speed will gradually increase. When the temperature falls below "setting - hysteresis", the fan speed will gradually decrease. If desired, the controller settings can be temporarily overridden to allow the fans to run at full speed (100%). 

Instructions for use: here*

Features:

• Plug and Play (simply connect it to the mains and switch it on).
• Easy to use.
• Temperature control range: 10 - 45°C
• Temperature hysteresis adjustment range: 1 - 7°C
• Connected temperature sensor with 4.5 m cable.
• Rotary knobs for easy adjustment of settings.
• Suitable for connecting 2 fans.
• Option for continuous full fan speed (100%).
• Easy fuse replacement.
• Spare fuse (included).
• Not compatible with other sensors or devices.

A step transformer that lets you control fans without low-frequency noise at low speed.

Its six control steps provide better control of the exhaust fan according to your selected temperature settings.

Two knobs allow you to set the temperature and temperature hysteresis.
Using the built-in J1 jumper (inside the housing), you can choose whether, once the desired temperature is reached, the fan continues at minimum speed or stops. When J1 is closed, ventilation continues at minimum speed. When it is open, the fan stops completely.

It is supplied with a 4m cable with a temperature and humidity sensor, an exhaust-fan outlet and a waterproof enclosure.

- temperature range: 20C° - 30C°
- temperature hysteresis: 2C°-8C°
- dimensions: 265mm x 300mm x 205mm
- max. power: 2,5A
- voltage: 230V / 50HZ
- Digital 5V sensor measures temperatures from –55°C to +125°C (–67°F to +257°F)
- Accuracy: 0,5C° within the range of -10C° to +85C°; ±4,5%rh
- protection rating: IP54

Control panel for operating HPS (sodium) and MH (metal halide) lamps, with a timer that controls lamp switching. On models with a heater output, the heater switches on when the lamps switch off for maximum electricity efficiency. The maximum permissible appliance power is 2000W.

Timer/contactor for 8x600W inductive loads.


Dimensions and technical data:

230x300x110mm
230V / 50Hz
24h timer with 36h battery backup, 30min settings.
4x16A 230V
protection class: IP40

Compatibility with 1000W ballasts and lamps:

circuits: 2 x 16A
With magnetic ballast: 4 x 1000W
With electronic ballast: 6 x 1000W

Control the climate in your grow room efficiently with TechGrow Clima Control Plus 7A - both during the day and at night.

• Power supply: from 100
• to 240V consumption: 3W (with sensor
,
• without fan) Maximum fan power: 7 Amp / 1700W
• Temperature setting range:
• 0 - 50°C TMP hysteresis +/- setting

range: 0 - 5°C I

for use here!   This Plus version offers every function available with Clima Control, plus separate daytime and night-time temperature settings, added heater-control functionality and a high-temperature socket. In addition, this controller has an adjustable delay time before switching from day to night mode to prevent unwanted fan cycling. With clear, comprehensive menus and the convenient Push & Turn dial, TechGrow Clima Control Plus 7A is easy for anyone to use. The unique calibration menu lets you determine how much power is required for 10% and 90% speed to set up each unit, regardless of its size. TechGrow Clima Control Plus 7A controls temperature only, but can also display readings from other connected sensors. Compatible with many other TechGrow devices.   Features:

7A heater

• connection day and night
• temperatures can be adjusted separately over
-temperature
• alarm contact adjustab
le
• delay time for switching from day to night temperature L
ED
• indicator for light detection, fan activity, heater activity and stable climate ideal for heating whe
n
• using LED lighting all settings are retained
• during power outages the display shows the min / max va
lues
• of the connected sensor(s) the fan can be operated automa
tically
• or manually the fan controller is adju
stable
• in 10% increments features a unique calibra
tion
• menu for configuring each unit, regardless of size can be connected to multip
le
• TechGrow devices comes without a sensor; sensors
• are available separately option to con
nect
• to Techgrow Datalogger (DL-1) the other functions
• are identical to TechGrow Clima Control 7A

This fully redesigned controller is easier to use and compatible with many other TechGrow products. The TechGrow T-Mini Pro CO₂ controller measures, controls and displays the CO₂ value and records min / max values. It features a built-in light sensor that automatically switches between day and night modes. No CO₂ is used at night.

• Power supply: from 100 to 240V
• Power consumption: 3W (with sensor, without CO2 source)
• CO₂ setup range: 300 to 2000ppm
• CO₂ +/- adjustment range: 20 to 200ppm (we recommend 50ppm)
• (Hysteresis / frequency band)
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

Instructions for use here!

Features:

• Can be set from 300 to 2000 ppm
• Built-in function for calibrating the CO₂ sensor against outdoor air
• The display shows the minimum / maximum readings of the built-in sensor
• The display refreshes every second
• LED indicator for CO₂ supply, light detection and stable climate
• All settings are retained during power outages
• The controller automatically switches between day and night mode via the built-in light sensor.
• Automatically turns off the display backlight after 60 seconds
• Peripherals are connected using a standard network cable (UTP)
• Option to connect to the Techgrow Datalogger (DL-1)

Control the climate in your grow room efficiently with TechGrow Clima Control 14A.

• power supply: from 100 to 240V
• consumption: 3W (with sensor, without fan)
• maximum fan power: 14 Amp / 3400W
• TMP setting range: 10 - 50°C
• TMP hysteresis +/- setting range: 0 - 5°C

Instructions for use here!

TechGrow Clima Control 14A lets you connect two fans at the same time. It has a very clear, comprehensive menu that is easy to learn, and also lets you monitor minimum and maximum values on the display. Thanks to the simple menus and convenient push-and-turn button, TechGrow Clima Control 14A is easy for anyone to use. Its unique calibration menu lets you determine how much power is needed for 10% and 90% speed settings for each unit, regardless of its size. TechGrow Clima Control 14A controls temperature only, but can also display values from other connected sensors. Compatible with many other TechGrow devices.

Features:

• TechGrow Clima Control 14A can measure, display and log min / max values from connected CO₂, humidity and temperature sensors
• All settings are retained in the event of a power outage
• The display shows the min./max. values of its connected sensor(s)
• the display updates every second
• LED indicator for light detection and a stable climate
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature allowing the fan to be adjusted in two simple steps
• offers a calibration menu for setting up each unit, regardless of its size
• automatically turns off the display backlight after 60 seconds
• automatically detects a broken cable or poor connection of connected sensors
• The sensor is connected using a standard network cable (UTP)
• can connect to multiple TechGrow devices
• Multiple sensors are available separately
• option to connect to Techgrow Datalogger (DL-1)

Controlling the climate in your grow room with TechGrow Clima Control Basic Plus 7A is simple yet effective.

• Power supply: from 100 to 240V
• Mains frequency: 50 to 60Hz
• Consumption: 3W (without fan)
• Maximum fan power: 7 Amp / 1700 W
• TMP setting range: 10 - 45°C
• TMP hyst +/- setting range: 1 -7°C
• Probe: pre-fitted temperature probe with 4.5m cable

Instructions for use here!

Setting up the Clima Control Basic Plus 7A is easy with its convenient rotary knobs. Its plain appearance is deceptive, as the Clima Control Basic Plus 7A is equipped with the reliable, advanced TechGrow technology you already know.

The bright green LED display shows the current temperature and set point while you adjust it.

This controller comes with a pre-fitted temperature probe with a 4.5m cable.

Features:

• Plug & Play
• LED indicator for set point and current temperature
• very easy to use
• adjustable minimum and maximum fan power
• analogue control knobs for easy setting adjustment
• two fan sockets
• easy to connect
• easy-to-replace fuse
• spare fuse included

TechGrow T-2 Pro CO2 controller 7A is an unrivalled device that controls CO₂, temperature and humidity in your grow room.

• Power supply: from 100 to 240V
• Consumption: 3W (with a sensor, without a CO₂)
• Maximum fan power: 7 Amp / 1700W
• CO₂ setpoint range : 300 to 2000ppm
• CO₂ +/- setting range: 20 to 200ppm (we recommend 50ppm)
• RH setpoint range: 10% - 90% RH
• RH +/- setting range: 0% - 10% RH
• TMP setpoint range: 0 - 45°C
• TMP hysteresis +/- setting range: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

Instructions for use here!

Thanks to this unique combination, you can dose CO₂ during the day while the fan extracts excess CO₂ and moisture produced by your plants at night. TechGrow Pro CO₂ controller T-2 7A increases ventilation at high temperatures, but this can be overridden by setting a very high temperature setpoint. This fully redesigned controller is compatible with many other devices from TechGrow. TechGrow Pro CO₂ controller T-2 7A measures, controls and displays CO₂, humidity and temperature values from connected sensors and records min/max values.

Easy fan control via "Box-menu".

Includes quick menus that provide a brief overview of all settings and measurements.

Recommended sensor: TechGrow S-4 0/2000 ppm

Compatible sensors:

1. ​TechGrow S-4 0/2000 ppm

Features:

• all CO₂ settings are the same as those of TechGrow Pro CO₂ controller T-1
• extraction of excess CO₂ and moisture at night
• unique calibration menu for setting up any grow box, regardless of size
• LED indicator for CO₂, light detection and stable climate
• controls CO₂, temperature and humidity simultaneously
• all settings are retained during power failures
• all setpoint, hysteresis and alarm values are individually adjustable
• quick menu for an overview of all settings and measurements
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature that lets you adjust the fan in two simple steps
• can be connected to multiple devices from TechGrow
• can be connected to TechGrow Datalogger (DL-1)

• voltage: 230V / 50Hz
• switching time: 15 min
• backup power: no
• manual switching: On - Automatic - Off

Technical specifications: 

• Imax: 16 A
• Umax: 230 V
• VAmax: 3600 W

Control the climate in your grow room efficiently with TechGrow Clima Control 7A.

• Power supply: from 100 to 240V
• Power consumption: 3W (with sensor, without fan)
• Maximum fan power: 7 Amp / 1700W
• TMP setting range: 10 - 50°C
• TMP hyst +/- setting range: 0 - 5°C

Instructions for use here!

TechGrow Clima Control 7A lets you connect two fans at the same time. It has a very clear, comprehensive menu that you are already familiar with, which also lets you view min./max. values on the display. Thanks to its straightforward menus and convenient push-and-turn button, TechGrow Clima Control 7A is easy for anyone to use. The unique calibration menu lets you determine how much power is required for 10% and 90% speed when setting up each unit, regardless of its size. TechGrow Clima Control 7A controls the temperature and can also display values from other connected sensors. Compatible with many other TechGrow devices.

Features:

• TechGrow Clima Control 7A can measure, display and record the min./max. values of connected CO₂, humidity and temperature sensors
• All settings are retained in the event of a power outage
• The display shows the min./max. values of its connected sensor(s)
• the display refreshes every second
• LED indicator for light detection and a stable climate
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature allowing the fan to be adjusted in two simple steps
• Offers a unique calibration menu for setting up each unit, regardless of its size and
• automatically turns off the display backlight after 60 seconds
• automatically detects a broken cable or poor connection of connected sensors
• The sensor is connected using a standard network cable (UTP)
• Can be connected to multiple TechGrow devices
• Multiple sensors are available separately
• can be connected to the Techgrow Datalogger (DL-1)

TechGrow T-2 Pro CO₂ 14A controller is an unparalleled device that controls CO₂ levels, temperature and humidity in your grow room.

• Power supply: from 100 to 240V
• Consumption: 3W (with sensor, without CO₂ source)
• Maximum fan power: 14 Amp / 3400W
• Maximum CO₂ source power: 6A / 1500W
• Maximum total power: 16A
• CO₂ system setting range : 300 to 2000ppm
• CO₂ +/- setting range: 20 to 200ppm (we recommend 50ppm)
• RH setting range: 10% - 90% RH
• RH +/- setting range: 0% - 10% RH
• TMP setting range: 0 - 45°C
• TMP hysteresis setting range +/-: 0 - 5°C
• Measurement interval: 1 measurement per second

Note: the sensor is sold separately!

Instructions for use here!

Thanks to this unique combination, you can dose CO₂ during the day, while the fan extracts excess CO₂ and the humidity produced by your plants at night. TechGrow Pro CO₂ controller T-2 14A increases ventilation at high temperatures, but this can be overridden by setting a (very) high set temperature. This fully redesigned controller is compatible with many other TechGrow devices. TechGrow Pro CO₂ controller T-2 14A measures, controls and displays CO₂, humidity and temperature values from connected sensors, and records min / max values.

Easy-to-use fan control via the "Box-menu".

Includes quick menus that provide a brief overview of all settings and measurements.

Recommended sensor: TechGrow S-4 0/2000 ppm

Compatible sensors:

1. ​TechGrow S-4 0/2000 ppm
2. TechGrow S-4 0/10000 ppm

Features:

• all CO₂ settings are the same as those of the TechGrow Pro CO₂ controller T-1
• extraction of excess CO₂ and humidity at night
• unique calibration menu for setting up every box, regardless of size
• LED indicator for CO₂ dosing, light detection and a stable climate
• controls CO₂, temperature and humidity simultaneously
• all settings are retained during power outages
• all setpoint, hysteresis and alarm values are individually adjustable
• quick menu for a quick overview of all settings and measurements
• the fan can be operated automatically or manually
• the fan controller is adjustable in 10% increments
• includes a unique feature allowing the fan to be adjusted in two simple steps
• can be connected to multiple devices from TechGrow
• can be connected to the Techgrow Datalogger (DL-1)

The Lighthouse wireless thermostat is ideal for most heating appliances. These include infrared heaters, tubular heaters, "fan heaters", underfloor heating and portable radiators, as well as various types of cooling equipment.

• Plug and Play (simply plug it in to the mains and switch it on, no installation required)
• automatic wireless connection between the portable thermostat and the switch
• option to select the "heating" or "cooling" function, depending on the appliance to be used
• built-in temperature sensor
• multi-channel - one portable thermostat can control several switches
• portable design, suitable for placement or wall mounting
• displays the current and desired temperature in ºC or ºF
• battery-saving LCD backlight with automatic switch-off
• low battery warning

Technical specifications:

• maximum ratings of the connected appliance: 230V, 50Hz, 13A, 3000W
• power supply for the portable thermostat: 2 x 1.5AA batteries (not included)
• current temperature measurement: 0ºC - 70ºC or 32ºF - 158ºF

Controller with settings for temperature, minimum speed and negative pressure, controlling inlet and outlet air fans.

Dimensions and technical data:

• Product dimensions: W80xH80xD130mm
• Package dimensions: W150xH110xD170mm
• Designed for: 2A / 2x200W / TRIAC 2x16A
• Voltage: 230V / 50HZ
• The 5V digital sensor measures temperatures from –55°C to +125°C (–67°F to +257°F )
• 0.5°C Accuracy from –10°C to +85°C
• Protection rating: IP54

Setting range:

• Temperature: from 20C° to 30C°
• Minimum speed: off, 20%, 100%
• Negative pressure: 100% to 50%

Instructions for use here!

• The controller manages one or two fans – one for inlet air and one for outlet air, or two for outlet air. Connect the exhaust fan to "Fan 1" and the intake fan to "Fan 2". Set the desired temperature value.
• The "Minimum Speed" setting sets the exhaust fan's minimum speed as a percentage of its maximum speed. At "Off", ventilation stops when not needed; at any other value, it runs at the set speed.
• The "Negative Pressure" setting sets the intake fan speed as a percentage of the exhaust fan speed. If you use this controller for 2 exhaust fans, set it to 100%; otherwise, determine the suitable value experimentally.
• As the temperature rises, fan speed increases gradually, reaching 2° 100% higher. As it decreases, the speed also drops to the value set by "Minimum Speed".
• Maintains a constant temperature, and negative pressure keeps odours contained.
• Can be used for two exhaust fans if the room has unrestricted air access.
• Ready to use and reliable, with a waterproof enclosure, socket covers and a low-voltage sensor, making it ideal for humid rooms.
• The sensor has a 4m cable, which can be extended to 50m.

Automatic irrigation system for up to 10 pots at once — provides regular, even watering when you are away or do not have time to water by hand.

Detailed features

• Type: automatic drip/micro-irrigation system (drip irrigation / micro-drip system). 

• Suitable for: pots, terraces, balconies, greenhouses or small gardens — up to 10 individual plants (pots). 

• Material: plastic components (tubes, fittings), resistant to moisture and standard garden conditions. 

• Power supply / control: the system includes a control element (timer / valve) for automatic water delivery according to a set schedule. 

• Suitable water pressure and flow rate: a system for home gardens / pots — does not require professional plumbing.

• Use: automatic watering of pots/containers — can reduce the need for manual watering, especially when you are away.

Recommendations for use

• Connect the system to a water source — tap, faucet or hose — and place one tube in/next to each container or pot.

• Set a watering schedule (frequency and duration) according to the plants’ needs — more often for fresh greens and flowers, less often for resilient or deep-rooted plants.

• When planting out or repotting, ensure the soil is well moistened before watering and set the system for moderate delivery.

• If you are away, the system will maintain moisture automatically, but it is advisable to check the tubes and distribution periodically to prevent blockages.

• For maximum effectiveness, combine with well-drained pots and a suitable substrate to avoid overwatering.