Cornwall Humidity Controller, humidity controller

The CORNWALL humidity controller is the ideal device for maintaining optimal humidity for your crop. Connect it to your humidifier or dehumidifier and set the desired humidity. The controller will take care of the rest.

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W
• Inductive load: 2A 460W 
• Operating temperature: 5°C - 40°C
• Storage temperature: -10°C - 50°C
• Controlled humidity range: 20% - 90%
• Accuracy: ±5%
• Reporting period: 10 sec

Before use, please read the instructions:

• Before setting the humidity, select the operating mode - dehumidification (fan icon) or humidification (droplets icon). In "dehumidification" mode, the controller supplies power when humidity exceeds the set value; in "humidification" mode, when humidity falls below the set value.
• To change the operating mode - press ON/OFF and the "up arrow" together for 3 seconds.
• Default setting: Humidity (SET): 40%; Mode: Humidification
• Setting the humidity - press ON/OFF

Humidification mode (icon: droplets):

• use the arrows to set the SET value at least 5% above the RH humidity (the currently measured humidity). After a few minutes, the indicator will light green and the controller will start supplying power;
• when the room humidity (RH) reaches the level set in SET, the indicator lights red, the droplets disappear from the screen, and the controller stops supplying power.
• when the room humidity (RH) is above the level set in SET, the indicator lights red and the controller will not supply power.

Dehumidification mode (icon: fan):

• use the arrows to set the SET value at least 5% below the RH humidity (the currently measured humidity). After a few minutes, the indicator will light green and the controller will start supplying power;
• when the room humidity (RH) drops to the level set in SET, the indicator lights red, the fan disappears from the screen, and the controller stops supplying power.
• when the room humidity (RH) is below the level set in SET, the indicator lights red and the controller will not supply power.

Important:

• Do not connect a power strip downstream of the controller!
• Do not connect devices that transmit vibrations to the controller!
• Ensure the safety of heating and moving devices!
• Protect from moisture, extreme temperatures, shocks, and vibrations!
• Use indoors only; do not expose to sunlight!
• Keep out of reach of children!

Charge the battery when the device displays "LO" - by plugging the device into an outlet!

Distinguish the maximum load of 16 A / 3680 W from the specified inductive load of 2 A / 460 W. For a motor, compressor, or other inductive device, observe the lower allowable limit.

Choosing a climate controller

Match the load type and control method. An AC fan with adjustable voltage and an EC fan with a signal input require different controls. Follow the limits for the specific model.

Browse ventilation and climate controllers.