Water Master Smart-Drip, irrigation for 4, 6, 9, or 12 plants

The Smart-Drip kit from Water Master is a ready-to-install drip irrigation system designed for 4, 6, 9 or 12 plants — it delivers water evenly and efficiently to the root zone and optimizes irrigation.

Detailed specifications

• Compatibility: system for 4 plants (“4 outlets”), according to the Smart-Drip 4 version.
• Pump: water pump included, flow rate 800 L/h, 1 unit.
• Tubing: polyethylene pipe Ø 16 mm — 1 m × 3 pcs. included (for the 4-way version), according to the official specifications.
• Microtubing: white microtube 5×3 mm – 60 cm × 4 pcs. for the 4-plant version
• Elbow fittings: 90° elbow Ø 16 mm – 3 pcs. for the version.
• End cap: Ø 16 mm “end cap” – 1 pc. for the version.
• Distributor (Netbow): Ø 12 cm / 5″ with 4 outlets, gray – 4 pcs. (for the 4-plants version), according to the specifications.
• “Smart VDL plug” (smart plug/control interface) – 1 pc. included.
• Other accessories: microtubing hole punch (Plastic hole punch), Microtube-dripper connectors – 4 pcs.
• Application: suitable for both hydroponics and containers in soil or a greenhouse — the system provides uniform and efficient water supply, adapted to each plant's needs.

Usage recommendations

• Plan the placement of the 4 plants before installation — it is recommended that each plant have one outlet line with microtubing.
• Install the tubing and fittings according to the included instructions, ensuring a level base and secure pump mounting.
• Check the water source and filter (if included) — make sure the water is clean and free of particles that could clog the microtubing.
• Set up the pump and check the flow rate — some systems require pressure adjustment based on the height and distance to the plants.
• Route the microtubing to the base of the plants, making sure each plant receives an appropriate supply — check that the drippers are aligned.
• Inspect the system regularly — check for clogs, leaks, or blockages in the microtubing and fittings.
• If the water supply is interrupted or you take a break from growing, drain the tubing, clean the pump, and store the system dry to prevent freezing or corrosion.

Benefits

The Water Master Smart-Drip for 4, 6, 9 and 12 plants offers a ready-to-use solution for automated drip irrigation. With a pump, tubing, micro-fittings, and a compact controller (VDL plug) included, it allows easy installation and setup of an irrigation system. Directing water to the root zone of four plants ensures more efficient use of resources, improved plant health, and less manual intervention.

Before the first watering

Check the power supply, required inlet pressure, and permitted operating intervals. Run a test watering cycle and check for leaks before relying on the set schedule.

Browse timers and irrigation kits.