Products

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps

Size: Ø150 mm

Length: 890 mm for two bulbs 

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps.

High-quality Miro9 material with 97% reflectivity.

Special plastic flanges to prevent accidents and reduce heat.

Mounting kit included.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps

Cool Tube is an indispensable piece of equipment for hydroponic and indoor growing. Our new Cool Tubes are designed to offer greater efficiency and safety to customers. The product is more efficient because Prima Klima uses special Miro9 material for its reflectors, delivering 97% reflectivity. The highly durable plastic flanges provide greater efficiency in removing heat from plants and more safety for users, as plastic does not conduct electricity. Our Cool Tubes are manufactured in Europe in accordance with all safety standards.

• High-quality Miro9 material with 97% reflectivity
• Special plastic flanges to prevent accidents and reduce heat
• Mounting kit included

Cooltube is a reflector with a cooling glass tube, designed to provide uniform lighting for plants without excess heat. It reduces the heat output of the lamp fitted in it by up to 40%. Heat is extracted through a suitable air duct fitted to the tube. 

• Length: 49 cm
• Tube diameter: Ø120 mm
• Suitable for 400W or 600W MH or HPS lamps
• An attached aluminium reflector provides 92% diffused light
• Includes an E40 lamp holder
• Materials: glass and aluminium

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal halide (MH) lamps. It combines the cooling capability of a CoolTube with a large reflective surface. Use Ф125mm air ducts when connecting several reflectors in series.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps. It combines the cooling capability of CoolTube with a large reflective surface. Use Ø150mm air ducts when connecting several reflectors in series.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps.

High-quality Miro9 material with 97% reflectivity.

Special plastic flanges to prevent accidents and reduce heat.

Mounting kit included.

Air-cooled reflector for 400 and 600 W sodium (HPS) and metal-halide (MH) lamps

Cool Tube is an indispensable piece of equipment for hydroponic and indoor growing. Our new Cool Tubes are designed to offer greater efficiency and safety to our customers. The product is more efficient because Prima Klima uses a special Miro9 material for the reflectors, which provides 97% reflectivity. The highly durable plastic flanges offer greater efficiency in removing heat from plants and more safety for users, as plastic does not conduct electricity. Our Cool Tubes are manufactured in Europe in accordance with all safety standards.

• High-quality Miro9 material with 97% reflectivity
• Special plastic flanges to prevent accidents and reduce heat
• Mounting kit included

Cornwall thermo-hygrometer (measures indoor air temperature and humidity) and stores the minimum and maximum recorded values.

• Temperature measurement range: -10°C to 50°C
• Humidity measurement range from 20% to 90% humidity
• Check the maximum or minimum temperature and humidity by pressing the MAX/MIN button. The data will show the maximum or minimum temperature/humidity since the last reset.
• Reset the data by pressing the RESET button once
• To switch the temperature measurement from Celsius to Fahrenheit (or vice versa), use the button on the back of the unit.
• Use one 1.5V AA battery (included)

Cornwall 12l/day Dehumidifier removes excess moisture from the air, creating a comfortable environment for your home and office. Its compact design makes it easy to move.

• Capacity (approx.): 12l/24h
• Coverage area: from 15 to 20m²
• Air flow: 448m³/h.
• Power consumption: 220W
• Dimensions: 29 x 17 x 51cm.

Cornwall 6L Humidifier is made from recyclable plastic. It can operate continuously for 16 hours. Through ultrasonic-wave vibration, the humidifier breaks water droplets into particles from 1 to 5 μm. The particles are then diffused by a fan. During this process, a large number of anions are produced and dispersed. This allows the unit to humidify and cool the air. Its main features are as follows:

• produces a soft, refreshing mist
• energy-saving
• quiet
• automatic shut-off
• long service life

• Voltage: 220-240 V; ~ 50Hz
• Power: 25W
• Water tank: 6L
• Maximum: 350ml/h

Enhance your surroundings with the Humidifier Cornwall 8.5L – the perfect helper for maintaining optimal humidity at home or in the office.

Clip-on circulation fan by Cornwall.

• Diameter: 15 cm / 6''
• Power: 15W
• Speeds: 2 speeds
• Power cable: 1.2m
• Voltage: 230V AC, 50Hz

Cornwall oscillating clip fan.

• Diameter: 22cm
• Power: 20W
• Speeds: 2 speeds
• 90° oscillation angle
• Power cable: 1.2m
• Voltage: 220-240V - 50-60Hz

Cornwall DUCTO 1 extractor fan 100mm 107m3/h

• Capacity: 107m³/h
• Flange: 100mm / 4"
• RPM: 2300
• Power: 15W
• Voltage: 220-240V, 50-60Hz

Note: the fan is supplied without a power cable!

You can find a power cable: here*

Cornwall DUCTO 2 outlet fan 125mm 190m3/h

• Capacity: 190m³/h
• Flange: 125mm / 5"
• RPM: 2400
• Power: 20W
• Voltage: 220-240V, 50-60Hz

Note: the fan comes without a power cable!

You can find a power cable: here*

Cornwall DUCTO 3 extractor fan 150 mm 305 m3/h

• Capacity: 305 m³/h
• Flange: 150 mm / 6"
• RPM: 2400
• Power: 30W
• Voltage: 220-240V, 50-60Hz

Note: the fan comes without a power cable!

You can find a power cable: here*

With the Cornwall voltage controller you can reduce the power at which your fans operate, thereby reducing noise emissions and supporting increased humidity.

• Power: up to 280W
• Voltage: 230V, 50Hz
• Amperage: up to 1.6A

Instructions for use:

1. Connect the controller to the mains power supply.
2. Connect the desired device to the controller.
3. The controller's indicator light should come on if it is switched on.
4. Use the rotary knob to set the desired power.

Desk, floor or wall-mount circulation fan from Cornwall Electronics.

• Diameter: 45cm / 18''
• Power: 45 W
• Speeds: 3 speeds
• For desk, floor or wall mounting
• Adjustable height
• Maximum height 125cm
• 90° head rotation
• Low power consumption
• Dimensions: 50x44x125cm

The CORNWALL humidity controller is the ideal device for ensuring optimum humidity for your crop. Connect it to your humidifier or dehumidifier and set the desired humidity. The controller does the rest.

• Voltage: 230V AC/50HZ
• Maximum load: 16A 3680W
• Inductive load: 2A 460W
• Operating temperature: 5°C - 40°C
• Storage temperature: -10°C - 50°C
• Controlled humidity range: 20% - 90%
• Accuracy: ±5%
• Sampling interval: 10 sec

Please read the instructions before use:

• Before setting the humidity, select the operating mode: dehumidification (fan icon) or humidification (droplet icon). In “dehumidification” mode, the controller supplies power when humidity exceeds the set value; in “humidification” mode, when humidity falls below the set value.
• To change the operating mode, press ON/OFF and the “up arrow” together for 3 seconds.
• Default setting: Humidity (SET): 40%; Mode: Humidification
• Setting the humidity: press ON/OFF

Humidification mode (droplet icon):

• use the arrows to set the SET value at least 5% above the RH humidity (the currently measured humidity). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• when the room humidity (RH) reaches the SET level, the indicator turns red, the droplets disappear from the display and the controller stops supplying power.
• when the room humidity (RH) is above the SET level, the indicator is red and the controller will not supply power.

Dehumidification mode (fan icon):

• use the arrows to set the SET value at least 5% below the RH humidity (the currently measured humidity). After a few minutes, the indicator will turn green and the controller will begin supplying power;
• when the room humidity (RH) falls to the SET level, the indicator turns red, the fan disappears from the display and the controller stops supplying power.
• when the room humidity (RH) is below the SET level, the indicator is red and the controller will not supply power.

Important:

• Do not connect a power strip after the controller!
• Do not connect devices that transmit vibrations to the controller!
• Ensure the safety of heating and moving appliances!
• Keep away from moisture, extreme temperatures, impacts and vibrations!
• Use indoors only; do not expose to sunlight!
• Keep away from children!

Recharge the battery when the device shows “LO” by plugging the device into a socket!

Cornwall 18W 500mg/h ozoniser neutralises odours and gases, microorganisms and pests.

• ozone output: 500mg/h
• power: 18W
• operating modes: 2
• voltage: AC 220V, 50 Hz

Operating instructions:

1. Switch on the power at the side of the device; the power indicator lights up and the device is ready for use.
2. Press the "Mode / Stop" button once; the "Ozone Mode 1" indicator lights up, showing that the unit has entered programme One.
3. Press the "Mode / Stop" button again; the "Ozone Mode 2" indicator lights up, showing that the unit has entered programme Two.

Safety warnings:

1. Warning symbol: This symbol reminds the user that this machine operates at high voltage.
2. Warning symbol: This symbol reminds the user to handle and maintain the appliance carefully.
3. Use it correctly according to the instructions.

Two ozone modes:

1. Ozone 1: A 15-minute cycle repeats continuously, then switches off for 120.
2. Ozone 2: The ozoniser will operate for 10 minutes and then switch off.