LED Lighting

Secret Jardin TNoled 2x20W Blooming is a complete LED lighting set for the flowering stage of indoor-grown plants. TNoled technology successfully replaces bulky fluorescent CFL and T5 bulbs of the recent past. 

 

• for flowering
• power: 40W
• voltage: 24V
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm above the plant tops)
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• dimensions L/W/H: 50 x 12 x 4cm
• warranty: 1 year

Full technical specifications: here*

 

Assembly instructions: here*

 

Technical specifications:

 

• for flowering
• power: 40W
• voltage: 24V
• efficiency: 2.0µmol/s
• coverage area: 60 x 40cm (when suspended 15cm from the tops of the plants)
• dimming capability: yes
• water resistance: IP65
• robust and resistant to falls
• lifespan: + 30 000 hours
• dimensions L/W/H: 50 x 12 x 4cm
• 24V cable: 180cm
• 110V-220V cable: 60cm
• weight: 0.75kg

Lux-Rooting TL LED V.2 12W 60cm 6500K 2.3μmol/J is a single LED bar for growth, suitable for seed germination, rooting seedlings or propagating clones / cuttings. Using the power cable, you can connect several single LED bars in series.

• For growth
• Power: 12W
• Length: 60cm
• Colour temperature: 6500K
• Efficiency: 2.3μmol/J
• Recommended hanging height: 20cm above the tops of the plants
• Lifespan: >35 000 hours

The power cable is not included and is sold separately! You can purchase it here*.

Secret Jardin Cosmorrow 100W Blooming is a complete diode / LED lighting set for the flowering stage of indoor-grown plants. The patented modular technology allows individual strips to be replaced (if you wish to add a different spectrum).

 

• for flowering
• power: 100W
• voltage: 24V
• efficiency: 2.4µmol/s
• coverage area: 60 x 60cm (when suspended 15cm above the plant tops)
• dimming option: yes
• water resistance: IP65
• robust and drop-resistant
• dimensions L/W/H: 50 x 40 x 6.5cm
• warranty: 1 year

Note: The set includes a power supply!

Full technical specifications: here*

 

Assembly instructions: here*

 

Technical specifications:

 

• for flowering
• power: 100W
• voltage: 24V
• efficiency: 2.4µmol/s
• LED strips: 5 x COP20BL
• coverage area: 60 x 60cm (when suspended 15cm above the plant tops)
• ​dimming capability: yes
• water resistance: IP65
• robust and resistant to drops
• lifetime: + 50 000 hours
• dimensions L/W/H: 50 x 40 x 6.5cm
• weight: 0.95kg

Lumatek power cable with EU plug

• Balanced full-spectrum light
• ​very high efficacy: 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Growing area with additional CO₂ supplementation: 1.5 x 1.5m.
• Growing area without additional CO₂ supplementation: 1.8 x 1.8m. (positioned higher above the plants)
• Lifespan: 60 000 hours
• Light source: Higher Spec Osram and Lumiled diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Dimensions: 1181.2 x 1091 x 105.7mm.
• Weight: 18kg.
• Warranty: 5 years

Technical specifications:

 

• Balanced full-spectrum light
• ​very high efficacy: 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Growing area: 1.5 x 1.5m. (with additional CO₂ supplementation)
• Growing area: 1.8 x 1.8m. (without additional CO₂ supplementation, position higher above the plants)
• Lifespan: 60 000 hours
• Light source: Higher Spec Osram and LUMLED diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1181.2 x 1091 x 105.7mm.
• Weight: 18kg.
• Warranty: 5 years

 

Full instructions for use: here*

 

Full technical specifications: here*

Secret Jardin Cosmorrow LED 40W L90cm UV is a single LED bar that emits in the ultraviolet spectrum. Ideal for supplementary vertical lighting for plants in your grow tent. The power supply is not included in the set - it is sold separately! You can purchase it here!

 

• strengthens the immune system
• combats mould
• shorter internodes

 

• power: 40W
• voltage: 24V
• efficiency: 1.6µmol/s
• light ratio: 33% UVA - 66% 6500°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• warranty: 1 year

We recommend using it with a separate timer from the main lighting!

Technical specifications:

 

• strengthens the immune system
• combats mould
• shorter internodes
• power: 40W
• voltage: 24V
• efficiency: 1.6µmol/s
• light ratio: 33% UVA - 66% 6500°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• dimensions L/W/H: 87 x 3.2 x 1.5cm
• weight: 0.30kg

Secret Jardin Cosmorrow Power 4/5x20W is a power supply for four / five 20W LED strips from the Cosmorrow range.

 

• power consumption: 100W
• voltage: 100-220V
• frequency: 50/60 Hz
• 24V cable: 180cm
• 110V-220V cable: 60cm
• weight: 0.95kg
• protection: IP54
  

Note: we recommend a distance of 4.5cm between each LED strip!

Vanguard Hydroponics LED Cosmos 65W is an LED lamp for indoor plant cultivation. The emitted light has a full spectrum, making it ideal for use in all stages of plant development – from germination, seedlings, cloning or vegetative growth, through to flowering / fruiting.

• lower operating costs and higher-quality yields
• ideal for all stages of cultivation
• best value for money
• full spectrum
• fanless, noiseless
• coverage area: 60 x 60 cm

Technical specifications:

• power: 65 W
• voltage: 220-240 V, 50-60 Hz
• total light output (PPF) at 25 cm from the top of the plants:  μmol/s
• efficacy:  μmol/J
• full spectrum
• suitable for: growth and flowering
• coverage area: 60 x 60 cm
• LED chips: 3000K - 101 pcs., 5000K - 96 pcs., 660nm - 26 pcs., 395nm -2 pcs., 730nm - 2 pcs. Sanan / Samsung
• dimmer modes: VEG Stage: Turn Off RED & IR, BLOOM Stage: Turn On RED & IR
• dimensions: 30 x 30 x 5 cm
• product weight: 0.65 kg
• service life: 50 000 hours
• warranty: 2 years

Vanguard Hydroponics LED Cosmos 240W is an LED grow light for indoor plants. Its emitted light has a full spectrum, making it ideal for use during all phases of plant development — from germination, seedling, cloning or vegetative growth to flowering / fruiting.

• lower operating costs and higher-quality yields
• ideal for all stages of growing
• best value for money
• full spectrum
• fanless, silent
• coverage area: 90 x 90 cm

Technical specifications:

• power: 240 W
• voltage: 220-240 V, 50-60 Hz
• total light output (PPF) at 25 cm from plant tops: 583 μmol/s
• efficacy: 2.4 μmol/J
• full spectrum
• suitable for: growth and flowering
• coverage area: 90 x 90 cm
• LED chips: 3000K - 308 pcs., 5000K - 150 pcs., 660nm - 68 pcs., 395nm - 4 pcs., 730nm - 4 pcs. Sanan
• dimmer modes: VEG Stage: Turn Off RED & IR, BLOOM Stage: Turn On RED & IR
• dimensions: 42 x 42 x 7 cm
• product weight: 3.05 kg
• service life: 50 000 hours
• warranty: 2 years

Introducing the smartest, most powerful and most efficient LED lighting on the market! DIMLUX XTREME SERIES LED 1000W+NIR. 

 

Dimlux Xtreme Series LED 1000W + NIR produces ultra-high PPFD levels of 3059μmol/s, evenly distributed over an area of 1.7 x 1.7m. It emits a full spectrum for cultivation, consistently producing crops with high yields and high quality. Dimlux Xtreme Series LED 1000W + NIR can be dimmed without losing efficiency, and the spectrum and power can be programmed according to the time of day and growth stage of the crop.

 

• power: 1065W at 230-240V
• total light output (PPF 350-800nm): 3059μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• coverage area: 1.7 x 1.7m
• optics: patented lens with deep penetration and ultra-high transmittance
• supplementary light: patented multicolour light tube 65k
• built-in Doppler proximity sensor
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink

THE MOST POWERFUL AND INTELLIGENT LED LIGHTING FOR GROWING PLANTS ON THE MARKET! With these innovative LED fixtures, Dimlux sets the benchmark for horticultural lighting. With patented technology, advances in LED technology and an optimal thermal design, Dimlux Xtreme Series LED will be the preferred option, offering a significant return on investment for hobby and professional growers alike. Our adjustable spectrum for growing with PhytoVegSpec® +NIR Indoor combines complete control over the quality of light (spectral flexibility) and the quantity (intensity and DLI), ensuring uniform spreading and even distribution of light with extreme penetration into the crop.

1. +NIR (NEAR INFRA-RED) (NEAR INFRARED 700-750NM = FAR RED). This lighting fixture has an amount of far-red light that is used together with red light. In addition, the far-red light provides a more complete spectrum, increased photosynthesis, increased photon absorption and higher yield due to adapted morphology. Due to the additional far-red component, plants will become slightly taller than with the version without +NIR.
2. COLOUR IPS DISPLAY AND USER INTERFACE. The integration of a colour IPS screen and PhytoVegspec® makes the Xtreme series unique and special. Its special feature is that the spectra and the B:R (blue:red) ratio, or the amount of blue to red light, are displayed very accurately on the screen. Using this information, lighting recipes can be exchanged between growers and companies using values that are quantitatively measurable and therefore universally exchangeable. The values that can be controlled are the percentages of BLUE, GREEN and RED light, the B:R ratio, PPF, PPFD, DLI, power, the percentages of emitted light, plant temperature and air temperature.
3. BUILT-IN OR EXTERNAL CONTROL. The lighting fixture can operate entirely independently and even serve as the main unit in a group with other lighting fixtures. They can also be controlled by external devices such as the Dimlux Maxi Controller or other controllers. Since the lighting fixture can be updated via Wi-Fi, it is possible to work according to the latest trends in lighting strategy and supplement the spectrum by adding additional lighting fixtures.
4. DRIVERLESS DESIGN (ballast). The drivers that power the LEDs are integrated into the frame of the lighting fixture. Since high-voltage drivers are used, efficiency is particularly high and heat losses are therefore lower. This lower heat loss makes it possible to integrate the drivers into the frame.
5. TILTED LENSES WITH DEEP PENETRATION AND ULTRA-HIGH TRANSMITTANCE. The tilted LED bars are designed to provide the ideal balance between light penetration and its even spread. At the recommended height above the crop, uniformity higher than 95% can be achieved when multiple lighting fixtures are used. Because the light from the lenses is focused, less scattered light is lost on walls and walkways. The patented ultra-high-transmittance lens is internally shaped in such a way that the light rays that would normally be reflected back towards the LED (converted back into heat) now end up right next to the LED and are reflected.
6. ADDITIONAL LIGHT TUBE WITH FULL-COLOUR LEDs. Our lighting fixtures have unique additional lighting that is directed through lenses built into the light tube. The auxiliary lights consist of full-colour LEDs and serve as additional lighting, an alarm indicator, a plant-temperature indicator or night lighting, depending on the situation.
7. SMART PORTS 3X. The Xtreme series has 3 available Smart ports. These are universal communication ports with various connection options for a wide range of sensors, such as a Plant Temperature Sensor, an Air Temperature Sensor, CO₂ and humidity, as well as climate-control devices. Communication can be both analogue and digital through the Smart Protocol. It is possible to control up to 160 lighting fixtures via analogue communication and >1000 fixtures via the Smart Protocol.
8. DOPPLER RADAR PROXIMITY SENSOR. The built-in Doppler radar sensor can detect movement up to 3 metres away. This sensor is used, for example, to activate the screen and for automatic activation of (green) additional lighting at night. The intensity and colour of the additional lighting can be adjusted so that the room can be entered at night without disturbing the plants' rhythm. Because the night lighting switches on only when movement is detected, it will not unnecessarily illuminate areas where it is not needed. The night lighting can be set to different intensities and colours, such as blue, which appears to have less effect on the sleep rhythm than green light, but to which human vision is less sensitive. The sensor will also be used to automatically switch off UV rays when the additional fixtures are used, preventing eye and skin damage.

Brochure and instructions for use in English: here*, here* and here*

 

Full technical specifications:

 

• model: Xtreme Series 1000W (+ NIR)
• full spectrum: adjustable PhytoVegspec® +NIR Indoor
• total light output (PPF 350-800nm): 3059μmol/s
• total photon efficacy (PPF 350-800nm): 2.9μmol/J
• power: 1065W at 230-240V
• voltage: 120-277V AC, 50/60Hz
• beam angle: 90° × 120°
• mounting height above plants: 40-85cm
• optics: patented deep-penetration lens with ultra-high transmissivity
• supplementary light: patented 65k multicolour light tube
• proximity sensor: Doppler radar
• cooling: passive
• max. ambient temperature: 40°C
• control: built-in (via the display) or with the Dimlux Maxi Controller
• smart ports X3: plant temperature sensor, light sensor, interlink
• spectrum display with graphical user interface (control menu): 1.54" 65k-colour IPS
• THD: < 10%
• lifetime: > 50 000 hours
• water and dust resistance: IP65
• certification: CE, UL 8800, UL 1598 Wet Location, DLC
• warranty: 5 years
• dimensions: 120 x 110 x 6cm
• weight: 24kg

The Dimlux temperature sensor enables the Dimlux Maxi Controller to dim the lights based on the ambient temperature in the grow room. If the set value is exceeded, the lights will dim to keep the temperature under control. If the temperature remains elevated despite dimming, half of the dimmed lights will be switched off in a checkerboard pattern. If the temperature continues to rise, all lights will be switched off for at least 20 minutes.

 

• measures temperature levels in the room
• precise, professional equipment
• 10m cable

The Dimlux temperature sensor (for the Dimlux Maxi Controller) is an additional accessory that is absolutely essential for every professional indoor growing facility. The main function of this product is to provide accurate real-time data on the climate in the grow room back to the onboard computer of the Dimlux Maxi Controller. With this sensor, the lights can be dimmed according to temperature-specific data. This sensor is also required to calculate VPD* and potentially to activate heating or a heater.

1. What is vapour pressure deficit (VPD)? Vapour pressure deficit is the difference between the water vapour pressure in 100% saturated air at a given temperature (the water vapour pressure in the leaves) and the actual water vapour pressure in the air. A high VPD value increases the plant's transpiration rate (the release of moisture through the leaves) and increases the movement of nutrients through the plant's xylem, while a low VPD value slows the movement of nutrients through the plant.

Agrolite QB730 is professional LED lighting, designed to provide homogeneous and precise lighting in indoor cultivation environments. With its full-spectrum distribution and Balanced Impact Distribution (BID) technology, this lighting optimises the growth and flowering of plants, eliminating hot spots and providing even distribution of light.

Key features:

• Power: 730W
• Colour temperature: 3480 K
• PPF (Photon Flux): 2110 µmol/s
• Efficiency: 2.9 µmol/J
• Light angle: 120°
• Lifespan: 60,000 hours
• Dimensions: 1105 x 1033 x 48 mm
• Weight: 8.5 kg
• Recommended coverage area: up to 1.5 x 1.5 m
• Recommended installation height at 100% power:
  • Vegetative stage: 70-100 cm
  • Flowering stage: 40-60 cm
• Input voltage: 220 - 240 V / 50 - 60 Hz (with permitted variations of ±10%)
• Power settings: OFF / 40% / 60% / 80% / 100% / EXT (external control)
• Built-in dimmable driver system with two RJ11 ports for 0-10V dimming

Advantages:

• Uniform lighting: BID technology and strategically positioned LED chips provide even light distribution, preventing hot spots and optimising plant growth.
• Flexible control: The ability to adjust power and provide external control through 0-10V dimming allows lighting to be tailored to the needs of every growth stage.
• Long service life: With a lifespan of 60,000 hours, this lighting offers reliability and long-lasting performance.

Agrolite QB730 is an ideal choice for professional growers, who seek efficient and reliable lighting for their crops. With its high specifications and customisation options, it provides optimal conditions for plant growth and flowering.

Vanguard Hydroponics LED Cosmos 45W is an LED grow light for indoor cultivation. The emitted light has a full spectrum, making it ideal for use throughout all stages of plant development – from germination, seedling, cloning or vegetative growth, through to flowering / fruiting.

• lower operating costs and higher-quality yields
• ideal for all stages of cultivation
• best value for money
• full spectrum
• fanless, noiseless
• coverage area: 50 x 50 cm

Technical specifications:

• power: 45 W
• voltage: 220-240 V, 50-60 Hz
• total light output (PPF) at 25 cm from the top of the plants:  μmol/s
• efficacy:  μmol/J
• full spectrum
• suitable for: growth and flowering
• coverage area: 60 x 60 cm
• LED chips: 3000K - 66 pcs., 5000K - 64 pcs., 660nm - 18 pcs., 395nm -2 pcs., 730nm - 2 pcs. Sanan / Samsung
• dimmer modes: VEG Stage: Turn Off RED & IR, BLOOM Stage: Turn On RED & IR
• dimensions: 25 x 25 x 5 cm
• product weight: 0.55 kg
• service life: 50 000 hours
• warranty: 2 years

Lumatek VF650W LED driver is a power driver for VF series lighting units: VF (Lumatek LED VF 90W and Lumatek LED VF 120W).

 

• can power up to 7 VF90 or up to 5 VF120 simultaneously
• can be switched off or dimmed using a standard 0-10V dimmer (sold separately)
• operating temperature: -20º - +40ºC
• operating humidity: 20% - 90%
• Water resistance: IP65
• dimensions: 230 x 120 x 50 mm
• weight: 2.0 kg
• warranty: 3 years

The driver is intended for indoor grow rooms with a controlled climate. It may be used in environments with humidity up to 90%, but must not be used in a more humid environment or outdoors!

 

Technical specifications:

 

• can power up to 7 VF90 or up to 5 VF120 simultaneously
• can be switched off or dimmed using a standard 0-10V dimmer (sold separately)
• operating temperature: -20º - +40ºC
• operating humidity: 20% - 90%
• Water resistance: IP65
• dimensions: 230 x 120 x 50mm
• weight: 2.0kg
• weight with packaging: 4.7kg
• warranty: 3 years

Lumatek LED VF 90W is the perfect diode / LED / lighting for young plants grown using vertical farming (hence the name of the VF series - Vertical Farming). These versatile, high-efficiency units ensure 100% success in your projects, from seed germination to nursery propagation.

 

• ideal for seeds and cuttings / clones
• power (100%): 103W @ 230V
• coverage area: 1.2 x 0.5 m
• efficacy: 2.4µmol/J
• PPF: 244 µmol/s
• power supply: Lumatek VF650W LED driver (sold separately), which can power up to 7 x VF 90W units
• dimensions: 1207 x 521 x 20.5mm
• weight: 1.72 kg
• warranty: 3 years

The VF series now features a new clear Glue protective coating technology on the LED bars, resulting in higher light transmission of 99% without light loss, extended diode life, extra corrosion resistance and high IP65 water resistance. For basic maintenance, simply clean with damp cotton.

 

Instructions for use: here* and here*

 

Full technical specifications:

 

• ideal spectrum and light intensity for young plants
• ideal for seeds and cuttings / clones
• power (100%): 103W @ 230V
• coverage area: 1.2 x 0.5m
• efficacy: 2.4µmol/J
• PPF: 244 µmol/s
• includes 3 x 30W LED bars attached to the frame
• colour temperature: 4000K, 3000K
• light distribution: 120º
• input current: 220-240V, 50-60Hz
• external-control capability: with LUMATEK Control Panel Plus 2.0 or universal 0-10V controllers
• fully dimmable (OFF, 25%, 50%, 75%, 100%) after connection to 650W LED driver
• passive cooling
• shortens the plant growth cycle
• power supply: Lumatek VF650W LED driver (sold separately), which can power up to 7 x VF 90W units
• Plug and Play (simply connect it to the mains and switch it on)
• IP65 water resistance
• lifetime: > 60 000 hours
• 3-year warranty
• dimensions: 1207 x 521 x 20.5mm
• weight: 1.72 kg
• warranty: 3 years

LUMii BLACK Blade 100W LED is a high-performance LED lighting system designed to provide optimal light for plants during the growth stage.

LUMii BLACK Blade 100W LED is a compact, economical and productive LED alternative to T5, CFL or 250 W metal-halide lamps. Providing full-spectrum white light with enhanced blue output, it is ideal for vegetative growth and propagation. (Not recommended for flowering and fruiting stages.) The fixture is large enough to illuminate an entire propagation tray and small enough to use in a LightHouse cloning tent. It is powered directly from the mains via the supplied 2 m power cable and includes hanging straps for easy installation. Technical specifications: Input power 100 W. Input voltage 100 - 277 V AC / 50 - 60 kHz. Input current 1 A at 100 V, 0,36 A at 277 V. Efficacy 2,6 µmol/J @ 220 V AC. PPF 260 µmol/s. Beam angle 120°. Protection rating IP65. Dimensions: 215 mm x 425 mm x 92 mm (8,5" x 16,7" x 3,6"). Weight 2 kg (4,4 lb). Operating ambient temperature and humidity: 0° C - 40° C (32° F - 104° F). Maximum relative humidity 95%. Storage temperature and humidity: -40° C - 70° C (-40° F - 158° F). Maximum relative humidity 85%.

Forget about a distribution board, timer box and relays! Dimlux lighting fixtures can be plugged directly into the socket! Simply set the on and off times and your lighting is ready to operate!
 
Dimlux Maxi Controller is a modular control system for Dimlux lighting, fans and heating. It can control up to 160 Dimlux lighting fixtures or ballasts. You can set the desired brightness using the + and - buttons. The Maxi Controller controls and monitors CO₂, plant temperature and vapour pressure deficit (VPD) depending on the selected connected sensors. Why choose the Dimlux Maxi Controller?

1. Gradual to continuously variable dimming.
2. Create optimal growing conditions for your crop.
3. Advanced connectivity and control options.
4. Simulates sunrise and sunset.
5. Datalog function (continuous recording of measured data)

Features:

 

• the controller works with a 5m standard Interlink cable (included)
• can control up to 160 Dimlux lighting fixtures or ballasts in groups of 40
• the first group of 40 can be controlled with all sensors
• switches lighting manually or automatically
• simulates sunrise and sunset
• measures ambient temperature via a temperature sensor
• measures relative humidity via a RH sensor
• measures plant temperature via a plant temperature camera
• displays the vapour pressure deficit (VPD)
• controls CO₂ via a CO₂ sensor
• detects flammable, toxic and harmful gases via a Gas Protect CO₂
sensor
• displays min./max. values for all sensors with a time stamp
• Datalog function for recording measured data from all sensors
• controls the fan based on temperature and humidity (with FAN/AUX BOX)
• controls a humidifier or dehumidifier and heating (with AUX BOX or FAN/AUX BOX)

 

Instructions for use in English: here* and here*

1. OPTIMAL CONTROL, MAXIMUM EFFICIENCY. Maxi Controller is a modular system* for controlling Dimlux lighting, fans and heating. It also controls and monitors CO2, vapour pressure deficit (VPD) and installation temperature, depending on the selected sensors. Maxi Controller can control up to 160 Dimlux Expert luminaires or Xtreme ballasts. It can silently switch the lighting on or off using the built-in timer. The lighting can also be variably dimmed to reach the desired output. The controller can adjust output according to the room temperature. The Dimlux lighting system dims automatically once a set temperature is exceeded. If the temperature is still too high, Maxi Controller will switch off all or half of the luminaires until the desired temperature is reached. Dimlux Expert luminaires or Xtreme ballasts can be connected directly to a power outlet. Simply set the on/off times and the system is ready to operate. The desired light intensity can be set with the + and – buttons. The Maxi Controller can also operate with asynchronous timing, for example 10 hours on and 10 hours off. This setting reduces total cycles by almost 20%. Sunrise and sunset can also be simulated. Maxi Controller also has a thermostat/hygrostat function. It is also possible to regulate the CO₂ level in an enclosed room using an extremely accurate dual-beam CO₂ sensor. This CO₂ sensor can control CO₂ generators and cold CO₂ systems. *The controller can be expanded to include an AUX BOX, FAN/AUX BOX, CO₂ sensor, CO₂ Gas Protect sensor, plant-temperature camera, humidity sensor and temperature sensor (sold separately).
2. COMPREHENSIVE AND PRECISE SETTINGS. In addition to the extensive 7 dimming levels, the Dimlux Maxi Controller can adjust light output according to room temperature. It also facilitates the transition from gradual dimming to continuously variable dimming, making it even easier to achieve the perfect lighting setting. This is possible by pressing the + and – buttons (brightness), or by setting the desired temperature and leaving the rest to the Dimlux Maxi Controller. When the preset temperature is exceeded, the lights automatically dim or are even partially switched off.
3. SENSORS: MEASUREMENT = KNOWLEDGE. Several sensors are available that can be connected to the Dimlux Maxi Controller. Temperature sensor and humidity sensor can be combined with a plant-temperature sensor for optimal plant growth. The values obtained from the sensors are then analysed and combined to achieve the optimal relationship between temperature, humidity and plant temperature — and therefore vapour pressure deficit.
4. SUNRISE AND SUNSET SIMULATION. Plants do not use photosynthesis until a certain temperature is reached. When lighting switches on after a dark period, this can be stressful and may affect growth; condensation may also form and cause rot. The Dimlux Maxi Controller can prevent this by slowly switching the Dimlux Expert lighting systems on and off, thereby simulating sunrise and sunset.
5. DATALOG FUNCTION. The data-logging function makes it possible to store all measured values from the controller on a USB flash drive for later viewing in graphical form on your computer. The controller records all values to the flash drive every minute.

• Balanced full-spectrum light
• ​very high efficacy: up to 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Coverage area: 2.0 x 1.5m
• Lifespan: + 60 000 hours
• Light distribution: 120°
• Light source: Higher Spec Osram and Lumiled LEDs
• Fully adjustable: OFF, 25%, 50%, 75%, 100%  with 0-10V dimmer (included)
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1700 x 1099.6 x 48.2 mm
• Weight: 17.5 kg
• Warranty: 5 years

Lumatek LED VF 120W is the perfect diode / LED / lighting solution for young plants grown using vertical farming (hence the series name VF - Vertical Farming). These versatile and highly efficient devices ensure 100% success in your projects, from seed germination to nursery propagation.

 

• ideal for seeds and cuttings / clones
• power (100%): 130W @ 230V
• coverage area: 1.2 x 0.5m
• efficacy: 2.4µmol/J
• PPF: 308µmol/s
• power supply: Lumatek VF650W LED driver (sold separately), which can power up to 5 x VF 120W devices
• dimensions: 1207 x 521 x 20.5mm
• weight: 2.1kg
• warranty: 3 years

The VF series now includes new clear Glue protective-coating technology on the LED bars, resulting in higher light transmission of 99% with no loss of light, extended diode life, additional corrosion resistance and high IP65 water resistance. For basic maintenance, simply clean with damp cotton.

 

Instructions for use: here* and here*

 

Full technical specifications:

 

• ideal spectrum and light intensity for young plants
• ideal for seeds and cuttings / clones
• power (100%): 130W @ 230V
• coverage area: 1.2 x 0.5m
• efficacy: 2.4µmol/J
• PPF: 308µmol/s
• includes 4 x 30W LED bars attached to the frame
• colour temperature: 4000K, 3000K
• light distribution: 120º
• input current: 220-240V, 50-60Hz
• external-control capability: with LUMATEK Control Panel Plus 2.0 or universal 0-10V controllers
• fully dimmable (OFF, 25%, 50%, 75%, 100%) after connection to 650W LED driver
• passive cooling
• shortens the plant growth cycle
• power supply: Lumatek VF650W LED driver (sold separately), which can power up to 5 x VF 120W devices
• Plug and Play (simply connect it to the mains and switch it on)
• IP65 water resistance
• lifetime: > 60 000 hours
• 3-year warranty
• dimensions: 1207 x 521 x 20.5mm
• weight: 2.1kg
• warranty: 3 years

Dimlux Aux Box connects to the Dimlux Maxi Controller via the controller’s aux port, turning it into a fully automatic climate system. Dimlux Aux Box has two connections – one for a heater or heating unit and one for a humidifier or dehumidifier. Control is electronic and there is no annoying humming.

 

 

Lumatek Zeus 465W PRO 2.9 is a complete LED lighting kit that, with its PPF of 1353µmol/s and efficacy of 2.9µmol/J, may be one of the best products currently available on the market. Its balanced full spectrum makes it ideal and sufficient for use throughout all stages of plant development - from germination and seedlings to cloning or vegetative growth, right through to the end of the flowering period for indoor-grown crops.

 

Why Lumatek LED:

1. Save up to 40% on electricity because less heat is generated in the space, reducing the need for cooling.
2. Gardeners growing with LED lighting notice improved crop quality as well as a higher final yield.
3. Guaranteed for 60 000h of operation and covered by a 5-year warranty.

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1353µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Lifespan: 60 000 hours
• Light source: Osram and LUMLED diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100%
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

As technology advances, high-quality LED horticultural lighting is now a reliable option for growers, offering a significant return on investment. Lumatek full-spectrum LED products balance light quality (spectra) with quantity (intensity and duration) sufficiently to provide a single-source lighting solution for the entire growing cycle - from vegetative growth through to flowering.
The linear layout of the LEDs creates even light distribution at a short distance from the crop, allowing single-source lighting for multi-tier growing systems, single benches in low rooms and grow tents.
Zeus is built using high-quality Lumatek drivers and top-tier Osram and LUMLED LEDs, producing full-spectrum light ideal for vegetative and flowering cycles.
For the different stages of the plant - germination, seedling or vegetative growth - the power of the Lumatek Zeus 465W COMPACT PRO 2.9 can be adjusted without losing efficiency. The highly efficient, low-powered LED configuration with five 93W LED bars lowers LED temperature, increasing output and improving light maintenance.

 

Technical specifications:

 

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1353µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Light distribution: 120°
• Lifespan: 60 000 hours
• Light source: Osram and LUMLED diodes
• Fully dimmable with 0-10V light dimmer (included): OFF, 25%, 50%, 75%, 100%
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

Full instructions for use: here*

 

Full technical specifications: here*

Plant temperature is more important than ambient temperature! When the camera is connected, the climate can be controlled based on plant temperature. If the plant temperature becomes too high, the Dimlux Maxi Controller will dim the lights to keep the stomata open. In the event of water shortage (e.g. due to a faulty pump), the lights are also dimmed or switched off to prevent crop damage.

 

• infrared camera for heat detection
• highly precise environmental control
• allows the Dimlux Maxi Controller to calculate VPD*
• used by the professional horticulture industry
• very easy to install – plugs directly into the Dimlux Maxi Controller
• 10m cable

 

*Note: see the detailed description for an explanation of vapour pressure deficit (VPD).

See how to calculate your plant's VPD: here*

 

Dimlux Plant Temperature Camera is a fantastic accessory that accurately measures your plant's infrared levels and sends the information back to the Dimlux Maxi Controller. This information is then used together with room temperature and humidity readings to calculate and display the vapour pressure deficit (VPD)* – the potential of the surrounding air to draw moisture from the plant. It gives the grower the most accurate information on how much the plants need to transpire (release moisture through their leaves) to reach equilibrium with the surrounding atmosphere. A high vapour pressure deficit means your plants will lose more water through their stomata. Low vapour pressure deficits mean plants retain water more easily (great for cuttings, etc.). The Dimlux Maxi Controller can regulate your lighting power according to the temperature difference between the plants and the surrounding atmosphere, ensuring that VPD levels are always within the correct range.

 

VPD (VAPOUR PRESSURE DEFICIT) VAPOUR PRESSURE DEFICIT. The plant temperature camera, connected to and integrated with the Dimlux Maxi Controller, measures the plant temperature and displays the results on the Dimlux Maxi Controller.

The question is: Why do we need a plant temperature camera at all?
The reason is that it is crucial for the Dimlux Maxi Controller to understand the plant's overall condition or health. The temperature of a healthy plant should always be lower than the ambient temperature in which it lives. Water and nutrients continuously move through the plant, keeping it cooler than its surroundings. If the plant temperature rises to the same temperature as the ambient air, it is no longer healthy and will begin to wilt and eventually die. Factors that contribute to this undesirable condition or environment include:

1. High-intensity discharge lighting - HPS (sodium) or MH (metal-halide) lamps
2. Lack of adequate extraction or ventilation
3. Incorrect water supply to the plant.

• With the help and intelligence of the Dimlux Maxi Controller, the lights it controls are dimmed until the plant temperature falls below the ambient temperature and remain that way until the fault causing the temperature imbalance between the plant and the ambient air is resolved (for example, a plumbing or electrical fault).
• Now, with the plant temperature camera, the temperature sensor and the Dimlux humidity sensor, connected to and integrated with the Dimlux Maxi Controller, the controller is programmed to analyse the ambient temperature, plant temperature and humidity levels, and to calculate another vitally important measurement, described as “Vapour Pressure Deficit” or VPD. This measurement is an indicator that best describes the level of environmental support in which the plant lives.
• This environment is critical for optimal growth and nutrient uptake, and depends on how hot and humid it is. If the indoor environment is lit with HPS, MH or CDM lighting, and humidity is above 70 to 80% while temperatures are above 35°C, then the plants' ability to photosynthesise and to take up CO₂ and to absorb nutrients decreases; consequently, the plants' ability to grow and produce flowers and fruit also decreases.
• Therefore, if the environment cannot be controlled or restored to normal conditions, your plants' ability to absorb nutrients and grow optimally will also be reduced. Consequently, reducing the light output and heat from HPS, MH or CDM lighting is the next logical step in balancing the parameters [heat and humidity] to maintain high photosynthetic activity and, more importantly, to keep the stomata in the leaves open.
• By keeping the stomata open for gas exchange, which is the main force driving water and nutrients through the plant, more sugars and amino acids are formed in the flowers/fruits for optimal production. This level of control is possible only with the Dimlux Maxi Controller and your Dimlux lighting. For greater flexibility in your indoor environment in relation to your lighting, the right control equipment is the key to consistently maximising the quality and yield potential of your plants and every harvest!
• The idea of VPD and its application is new, exciting and perhaps confusing to some. The idea, once again, is that if it is too hot or too humid for your plants to function optimally, why waste electricity on lights at full power when the plants cannot use the light, when we can balance heat and humidity by reducing lighting power and bringing the VPD reading to around 1 to 1.2?
• By doing this, the plants will use the nutrients you feed them, and therefore grow and produce optimally. Again, this is possible only with Dimlux lighting, Dimlux Maxi Controller and the plant temperature camera, the temperature sensor and the Dimlux humidity sensor. The same yields have been achieved even at 70% light output, simply because the other parameters were balanced and optimal VPD was achieved.

LUMATEK Digital Panel PLUS 2.0 (HID+LED) is a digital lighting controller that can control all LED light fixtures, drivers and Lumatek ballasts. Using innovative technology, this controller intelligently monitors room temperatures and the light cycle, and safely controls the dimming and switching on/off of the lighting.

 

• controls up to 400 ballasts or 100 LED drivers
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• compatible with all Lumatek ballasts: 315W, 600W, 630W and 1000W
• compatible with all Lumatek LED drivers: 90W, 120W, 465W, 600W and 1000W
• temperature sensor for monitoring and control
• automatic temperature regulation through dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• warranty: 3 years

Instructions for use: here* and here*

 

Lumatek Digital Panel Plus 2.0 is a dual-signal, dual-channel digital lighting controller. Each of its two channels (zones) can control up to 200 Lumatek ballasts or up to 50 LED fixtures. Each channel (zone) can control ballasts/drivers with the same wattage; Zone A can control ballasts/drivers with the same power supply as Zone B, or Zone B can be configured to control ballasts/drivers with a different wattage. For example, Zone A can control 600W LED fixtures, while Zone B can control 600W or 315W HID ballasts.

 

Features:

 

• controls up to 400 ballasts or 100 LED fixtures
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• 24-hour lighting schedule and switching
• temperature sensor for monitoring and control
• dimming with up to ±1% accuracy
• automatic temperature regulation through dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• automated light-intensity control

 

Specifications:

 

• power supply: adapter 100 - 240V, 50/60Hz - DC 5V/2A
• compatible with all Lumatek ballasts: 315W, 600W, 630W and 1000W
• compatible with all Lumatek LED drivers: 90W, 120W, 465W, 600W and 1000W
• dimming range: 10% - 115%
• power dimming accuracy: 1%
• sunrise/sunset duration: 0-30 min
• dimensions: 125 x 80 x 25mm
• warranty: 3 years

🔹 The Original 60 is a fully equipped indoor garden station (tent) measuring 60 x 40 x 116 cm, designed to provide optimal conditions for plant growth. With its three shelves, intensive lighting, and efficient ventilation, it is perfect for growing seedlings, microgreens, and small plants in limited spaces. 

Detailed specifications

• Dimensions: 60 x 40 x 116 cm
• Weight: 11.5 kg
• Lighting: 3 x 20 W LED strips with an intense spectrum optimized for vegetative growth
• Consumption: 45 kWh/month
• Voltage: 24 V DC (low voltage for safety)
• Ventilation: Temperature-controlled extractor and circulation fan
• Construction: 90% reflective Mylar, 300 g/m² moisture-resistant coating
• Additional accessories: Option to add a DF16F100 carbon filter and HM20 heating mat

 

 

Recommended use

This station is ideal for:

• Growing herbs such as basil, coriander, mint, oregano, and more.
• Producing microgreens such as arugula, spinach, radishes, and more.
• Growing seedlings for subsequent transplanting into a garden or pots
• Growing small vegetables and fruits such as cherry tomatoes, peppers, strawberries, and more.

 

Benefits

• Compactness: Suitable for small spaces such as apartments and kitchens.
• Energy efficiency: Low monthly energy consumption.
• Safety: Operates at low voltage, reducing the risk of accidents.
• Easy maintenance: Easy to assemble and clean.
• Flexibility: Option to add additional accessories to customize the conditions.

Secret Jardin TLED 26W L54cm Growing is a single LED bar for the growth stage of indoor-grown plants. Ideal as supplementary vertical lighting for the plants in your grow tent.

 

• for growth
• Power: 42W
• efficiency: 2.0µmol/s
• Colour temperature: 6500K
• Coverage area: 120 x 60cm (when suspended 15cm above the tops of the plants)
• protection rating: IP54
• lifespan: + 50 000 hours
• warranty: 1 year
• Power cable: yes

Technical specifications:

 

• for growth
• Power: 42W
• efficiency: 2.0µmol/s
• Colour temperature: 6500K
• Coverage area: 120 x 60cm (when suspended 15cm above the tops of the plants)
• voltage: 100-220V
• frequency: 50/60 Hz
• Dimensions: 95 x 4 x 3cm
• Weight: 0.58kg
• protection rating: IP54
• lifespan: + 50 000 hours

LUMii Black LED Bar 30W UV/FR is a specialised LED lamp designed to supplement the main lighting in your indoor garden with important ultraviolet (UV) and far-red (FR) spectra. LUMii Black Bar 30w UV/FR LED is a simple bar-shaped LED lamp that provides supplementary ultraviolet and infrared light to extend the light spectrum provided by other light sources. It is designed to connect to the LUMii Black Blade 400w LED fixture, but can also be used alongside any other full-spectrum grow light to increase crop yield and quality, stimulate growth and support flowering. It plugs in and operates with its own power cable; we recommend controlling it with a timer and using it for about 2 hours a day during the photoperiod. USPs: Adds UVA rays (385 nm) to the grow-light spectrum Adds infrared wavelengths (730 nm) to the grow-light spectrum Fits directly onto the LUMii Black Blade 400w LED Can be used as supplementary lighting with any other grow lighting Powered directly from the mains Technical specifications: Power 30 W ± 5 % Input voltage 100-277 V AC / 50-60 kHz Input current 0,3 A at 100 V, 0,11 A at 277 V Output 56,60 umol/s - wavelength 200-800 nm Chips 385 nm and 730 nm Light beam angle 120° Protection rating IP65 Dimensions Length 605 mm (23,82") Width 57 mm (2,24") Depth 31 mm (1,21") Weight 0,85 kg / 1,87 lb Operating ambient temperature and humidity 0°C - 40°C (32°F - 104°F). Maximum relative humidity 95% Storage temperature and humidity -40°C - 70°C (-40°F - 158°F). Maximum relative humidity 85%

Cosmorrow Kit 200w PPE 2.7 Full Spectrum provides optimal and efficient lighting for all stages of indoor plant growth, combining a full light spectrum with high energy efficiency.

Growing plants indoors requires the right tool, and Cosmorrow Kit 200w PPE 2.7 Full Spectrum is exactly that. This lamp is designed specifically for gardeners seeking high-quality lighting that meets the needs of different plant stages. With its full light spectrum, it ensures that your plants receive all the wavelengths needed for optimal growth and flowering. Its 200W power and PPE 2.7 ensure maximum efficiency with minimal electricity consumption. The kit includes everything needed for quick and easy installation. Whether you are a beginner or an experienced gardener, Cosmorrow Kit will help you grow healthy plants with abundant harvests.

Secret Jardin Cosmorrow LED 40W L90cm IR is a single LED strip emitting in the infrared spectrum. Ideal for supplementary vertical lighting for plants in your tent. The power supply is not included - sold separately! You can purchase it here!

 

• accelerates flowering
• warms the plants
• longer internodes
  
• power: 40W
• voltage: 24V
• efficacy: 1.7µmol/s
• light ratio: 33% IR : 66% 2100°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• warranty: 1 year

 

We recommend using it with a separate timer from the main lighting!

Technical specifications:

 

• accelerates flowering
• warms the plants
• longer internodes
• power: 40W
• voltage: 24V
• efficacy: 1.7µmol/s
• light ratio: 33% IR : 66% 2100°K
• dimming option: yes
• water resistance: IP65
• sturdy and drop-resistant
• dimensions L/W/H: 87 x 3.2 x 1.5cm
• weight: 0.30kg

 

Lumatek Zeus 1000W PRO EVO 3.1 is a highly efficient LED fixture designed for professional growers seeking maximum performance and even illumination across large areas. With its unique rectangular frame and exceptional light efficiency, this model offers optimal coverage and light penetration suitable for all growth stages.​

Advantages:

• Full-spectrum light: Ideal for all growth phases – from vegetative growth to flowering.

• Modular design: 10 magnetic LED bars of 100W for easy replacement and maintenance.

• High-quality components: Samsung LM301H EVO and Osram diodes for maximum efficiency.

• Protection: Transparent adhesive coating for 99% light transmission and corrosion protection.

• Flexibility: Suitable for various configurations – from low rooms to multi-layer systems

 

Technical specifications:

• efficacy: up to 3.1 µmol/J
• light output (PPF): 3125 µmol/s
• input voltage: 220-240V, 50-60Hz
• input power at 100%: 1025 W (±5%) at 230 V AC
• coverage: 2.0 x 1.5 m
• waterproof protection: IP65
• lifetime: 60 000 hours
• light distribution: 120°
• cooling: passive cooling
• power modes: OFF.-25%-50%-75%-100% with 0-10V light dimmer (included)
• external control: with Lumatek Digital Panel Plus 2.0
• weight: 18 kg
• dimensions: 1700 x 1200 x 84 mm
• spectrum: full spectrum F
• warranty: 5 years

The set includes:

• 10 x full-spectrum LED bars Lumatek 100W Pro 3.1
• 1 x LED frame
• 1 x electronic ballast with connecting cables Lumatek 1000W PRO 3.1
• 1 x 0-10V light dimmer + Velcro
• 2 x metal hanging wires
• 1 x manual in English

If you have a damaged ballast on your Lumatek - ZEUS, we offer the possibility to purchase it as a spare part. 

Electronic Ballast for LED lighting fixtures Lumatek - ZEUS PRO 2.9 and 3.1 models 600W