LUMATEK

Lumatek Daisy-Chain 5m. Control cable is a daisy-chain cable for your controllable LUMATEK LED lighting fixtures, providing a stable, precise connection without interference.

• length: 5m

Instructions for use: Simply connect the self-locking M12 male plug to the Signal Out output and the self-locking M12 female plug to the Signal In input of the next lighting fixture.

Lumatek Zeus LED fixtures and LED accessories: vconnection options for the various models in English here*.

Technical / test data:

• length: 5m.
• The withstand voltage between conductor and insulation is 800 VAC, 2 mA, test time 60 S; no breakdown or leakage occurs.
• Temperature resistance: 80℃
• Operating temperature: -20 - 105℃
• Storage temperature: -25 - 105℃
• IP65 protection
• Complies with RoHS*

Lumatek Dimmer Box 3-Pin PRO is an original manual dimmer designed to control compatible Lumatek LED lighting fixtures via a 3-pin control connector. It allows easy adjustment of light output in 25% – 50% – 75% – 100%, increments, without the need for an external controller. This is a practical solution for optimising light intensity throughout the different stages of plant development.

Lumatek Dimmer Box 3-Pin PRO was developed as an original accessory for Lumatek LED lighting systems. It connects directly to the 3-pin DIM port of compatible fixtures and enables fast, easy control of light intensity without the need for a digital control panel.

Using the mechanical switch, you can choose between several preset power levels—25%, 50%, 75% and 100%, allowing the lighting to be adapted to the plant development stage. Reducing light intensity is particularly useful during germination, rooting and early vegetative growth, when young plants do not need maximum light output.

The dimmer is compact, easy to install and requires no additional configuration. It simply connects to compatible LED lighting and is ready for use. It is suitable both as a replacement for the original dimmer and as a spare accessory.

Technical specifications

✔️ Manufacturer: Lumatek

✔️ Model: Dimmer Box 3-Pin PRO

✔️ Type: Manual dimmer for LED lighting

✔️ Connection: 3-pin connector

✔️ Power adjustment:

• OFF
• 25%
• 50%
• 75%
• 100%

Compatibility

Compatible with selected Lumatek LED lighting models, including:

✔️ Lumatek VF 90W LED

✔️ Lumatek VF 120W LED

✔️ Lumatek ATS 200W PRO (ATTIS)

✔️ Lumatek ATS 300W PRO 2.7-3.1

✔️ Lumatek ZEUS 465W Compact PRO

✔️ Lumatek ZEUS 465W PRO 2.3-3.1

✔️ Lumatek ZEUS 600W 2.3-3.1

✔️ Lumatek ZEUS 1000W 2.3-3.1

✔️ Other Lumatek models equipped with a 3-pin DIM input.

Benefits

✔️ Original Lumatek accessory

✔️ Easy adjustment of light output

✔️ Dimming levels: 25%, 50%, 75% and 100%

✔️ Plug & Play installation

✔️ No programming required

✔️ Compact and convenient to use

✔️ Suitable as a spare or replacement dimmer

✔️ Provides optimal light intensity for the different growth stages.

📋 Instructions for use

1. Disconnect the LED lighting fixture from the mains.
2. Connect the dimmer to the 3-pin DIM port of the lighting fixture.
3. Switch on the lighting fixture.
4. Select the desired power level—25%, 50%, 75% or 100%.
5. If necessary, adjust the intensity according to the plant development stage.

💡 Urban Botaniks tip: Use lower lighting levels (25–50%) during germination and rooting, increase to 75% during vegetative growth, and use 100% power during flowering, when plants have the highest light requirements.