Measuring Instruments

A practical, compact measuring jug with handle, with a capacity of 2 L — a handy tool for accurately measuring liquids in the kitchen, laboratory, garden, or when preparing solutions and mixtures.

Capacity: 2 L

Material: plastic

Bluelab Grower`s Toolbox is a set of instruments for measuring the pH and electrical conductivity of the nutrient solution:

• Bluelab pH pen
• Bluelab EC pen
• 1-year warranty

Product technical specifications here!

The key parameters for your plants' growth – at a glance, anywhere and anytime!

The Bluelab Guardian Wi-Fi Monitor keeps you informed about the three key factors for healthy plant growth: pH, conductivity and temperature. With a quick glance at the display or your smartphone (via the Edenic by BlueLab app), you will have all the data you need to optimise your nutrient solution at every stage of plant growth!

• Connect it to the Edenic by BlueLab mobile app. Real-time monitoring, control, alerts and a complete overview right on your phone. 
• Built-in Wi-Fi (can be disabled).
• Alerts for low or high pH, temperature and conductivity values.
• Non-volatile memory (settings are retained in the event of a power loss)
• Plant-friendly green backlit display with adjustable brightness.
• 2-metre cables for the measurement probes.
• 110 - 240 VAC (mains power supply).
• Included Bluelab pH Probe replaceable probe.
• 2-year warranty on the device.
• 6-month warranty on the Bluelab pH Probe probe.
• Does not require calibration of the conductivity/temperature probe (factory calibrated)

Measurement range:

• pH: 0.0 - 14.0
• temperature: °C / °F 0–50 / 32–122
• EC / CF / ppm 500 (TDS) / ppm 700: 0.0 - 5.0 / 0 -50 / 0 - 2500 / 0 - 3500

Measurement accuracy (at 25°C):

• pH: ± 0.1 
• temperature: ± 1 / ± 2
• EC / CF / ppm 500 (TDS) / ppm 700: ± 0.1 / ± 1.0 / ± 50 / ± 70

Package contents:

• 1x Bluelab Guardian Monitor Wi-Fi with conductivity/temperature probe
• 1x Bluelab pH probe
• 1x Bluelab pH probe holder with suction cup
• 4x plug adapters (North America, Europe, the United Kingdom and Australia/New Zealand)
• 4x mounting screws
• 2x cable ties
• 1x Bluelab pH 7.0 20 ml single-use calibration solution
• 1x Bluelab pH 4.0 20 ml single-use calibration solution
• 1x Bluelab KCl 20 ml storage solution

On Balance MYCO MX-100 is a lightweight pocket electronic scale with compact dimensions and design. The hard-plastic lid protects the measuring sensor during transport or storage and also serves as an expandable tray.

• weighing capacity: max. 100 g
• weighing accuracy: up to 0.01 g
• automatic shut-off function after 3 minutes of inactivity
• Tare/Zero function for subtracting the weight of the tray
• easy calibration with one touch
• dimensions: 9.2 x 6 x 2 cm
• batteries: 2 x AAA (included)

Instructions for use: here*

Features:

• removable lid / tray
• weighing capacity: max. 100 g
• weighing accuracy: up to 0.01 g
• easy-to-read measurements on the green LCD display
• built-in overload protection, protecting the scale from damage
• automatic shut-off function after 3 minutes of inactivity
• Tare/Zero function for subtracting the weight of the tray
• easy calibration with one touch
• batteries: 2 x AAA (included)
• scale dimensions: 9.2 x 6 x 2 cm
• platform dimensions: 5.6 x 5.6 cm
• weight (with batteries): 65.6 g
• package dimensions: 10.4 x 6.3 x 2.2 cm
• warranty: 10 years

Avoid:

1. Use on uneven surfaces!
2. Use near radio-frequency transmitters!
3. High humidity!
4. Use near strong air currents!
5. Vibrations!
6. Extreme temperatures!

Professional PAR meter for measuring photosynthetically active radiation (400-700 nm) — ideal for precise plant-light control. ?

Detailed features

• Measuring range: 0-3999 µmol/m²/sec.
• Repeatability: ±1 µmol/m²/sec.
• Display resolution: 0.1 µmol/m²/sec for values 0-999; 1 µmol/m²/sec for values above 999.
• Measurement wavelength: 400 ± 10 nm to 700 ± 10 nm.
• Operating temperature: 0 °C to 50 °C.
• No condensation during use or storage.
• Power supply: 2 × AAA batteries.
• Dimensions: Main body: 115 × 60 × 24 mm; sensor: 80 × 45.6 × 26 mm.
• Weight: 115 g (without batteries).

Recommendations for use

• Measure PAR radiation directly above the plants to ensure they receive optimal light intensity for photosynthesis.
• Use the sensor at different growth stages (seedling, vegetative growth, flowering) to adjust the lighting accordingly.
• Store the device in a dry place and replace the batteries in time for accurate measurements.
• Avoid excess or insufficient light — use the meter readings to adjust lamp height or running time.
• For mobile or temporary setups, the device is very useful for a quick check of the light profile and distribution uniformity.

Benefits

With the VDL Par Meter you get a precise light-control tool that lets you manage photosynthetic activation in your plants. Its accuracy, wide range and convenient size make it an attractive solution for professional and hobby growers seeking optimal results.

VDL PAR Meter — precise PAR radiation meter

Calibration solution for electrical conductivity (EC) meters – pens, monitors and controllers.

• preset EC value: 2.76 mS/cm
• suitable for Bluelab®
• volume: 300 ml

Electrical conductivity (EC) meters must be calibrated regularly. Follow the instructions supplied with the meter. After use, always rinse the probe with clean water and dry it with a tissue.
The Bluelab Truncheon EC meter does not require calibration! However, it should be checked regularly with this solution. If the reading is low or different from 2.76 mS/cm, the probe tip must be cleaned carefully; also check the batteries.

Storage conditions:

1. Store in a cool place!
2. Keep out of reach of children!

On Balance DJ-100-RD is a compact digital scale shaped like a jewellery box that fits comfortably in the palm of your hand.

• removable lid / tray 
• base made of stainless steel
• capacity: 100g
• measurement to: 0.01g
• scale dimensions: 9.5 x 6.2 x 1.9cm
• platform dimensions: 5.4 x 5.5cm
• weight: 72g

Instructions for use: here*

Features:

• removable cover / weighing tray 
• base made of stainless steel
• capacity: 100g
• measurement to: 0.01g
• scale dimensions: 9.5 x 6.2 x 1.9cm
• platform dimensions: 5.4 x 5.5cm
• weight: 72g
• package dimensions: 9.7 x 6.4 x 2.3cm
• weight with packaging: 85g

Avoid:

1. To use on uneven surfaces!
2. To use near radio-frequency transmitters!
3. High humidity!
4. To use near strong air currents!
5. Vibrations!
6. Extreme temperatures!

Automate dosing of pH regulator into your solution with the Milwaukee MP810 peristaltic dosing pump!

The pump offers a maximum pressure of 1.5 bar or more than 15 m of head pressure, with a dosing flow of 0.6 l/min.

• constant dosing flow: 1.5 l/h (25 ml/min)
• without adjustment
• maximum pressure: 1.5 bar
• made of: polypropylene (PP)
• peristaltic tube made of: Santoprene
• tube diameter: outer ⌀ 6mm.
• power supply: 240 VAC ± 10%
• power consumption: 0.42 W
• dimensions: 9.9 x 10.7 x 10.9 cm.
• weight: 0.5 kg

Instructions for use here.

accessories:

• clear PVC tubing: 2 x 1.6 m
• discharge fitting
• suction fitting with filter and ceramic weight
• mounting bracket with a set of screws and wall plugs

Bluelab PeriPod M3 enables automatic maintenance of ideal pH and nutrient levels in your reservoir!

• 1x 120ml/min peristaltic pump for dosing solutions for adjusting pH
• 2x 120ml/min peristaltic pumps for dosing nutrients
• robust housing and wall-mounting capability
• individual pump priming and calibration
• replaceable peristaltic pumps and tubing
• 4 m alkali-resistant tubing for dosing pH adjuster
• 2x 4m tubing for dosing nutrient solution
• compatible with most modern growing systems, including recirculating and standard drain-to-waste systems
• compatible with Bluelab Pro Controller

*Please note: Only M-series pumps (M3 and M4) can be connected together. L3 can only be connected to other L3 units

Instructions in English for the use and operation of peristaltic dosing pumps here.

Instructions in English for replacing a peristaltic dosing pump here.

Instructions in English for replacing dosing tubing here.

Instructions in English for replacing a peristaltic dosing pump cartridge here.

Stop wasting your valuable time manually dosing and preparing nutrient solution! Bluelab PeriPod M3 is a simple device designed to work with Bluelab Pro Controller and together they provide your optimal solution for dosing nutrients into your reservoir. Bluelab PeriPod M3 responds to signals sent by Bluelab Pro Controller and, through its peristaltic pumps, begins dosing and pumping pH adjuster and nutrient solutions into your reservoir. Measure, control and maintain pH levels precisely.

Growth Technology pH Probe Cleaner is a specialised cleaning solution developed for safe and effective cleaning of pH probes and electrodes, suitable for BLuelab and Milwaukee. It removes accumulated mineral salts, nutrient residues and organic contaminants that can affect measurement accuracy. Regular use extends the life of pH electrodes and maintains maximum measurement accuracy.

Every pH electrode gradually becomes contaminated during use, especially when measuring nutrient solutions, water with high mineral content or organic solutions. Deposits on the sensitive membrane can lead to a slower response, inaccurate measurements and difficult calibration.Growth Technology pH Probe Cleaner was developed specifically to safely remove these contaminants without damaging the electrode's sensitive structure.

Regular cleaning restores the probe's response speed, improves measurement accuracy and reduces the need for premature electrode replacement. The manufacturer recommends that, after each cleaning, the probe be recalibrated using pH 7.0 and pH 4.0 buffer solutions to ensure the most accurate results.

Growth Technology pH Probe Cleaner is suitable for all Bluelab pH probes and pH meters, including Milawaukee and those from other manufacturers.

Technical specifications

✔️ Manufacturer: Growth Technology

✔️ Type: Cleaning solution for pH probes

✔️ Capacity: 300 ml

✔️ Intended use: Cleaning pH and EC electrodes

✔️ Safe for glass pH electrodes

✔️ Removes mineral deposits and organic contaminants

✔️ Improves measurement accuracy

✔️ Extends the service life of pH probes

✔️ Suitable for regular maintenance of measuring instruments.

Benefits

✔️ Effectively cleans pH and EC electrodes

✔️ Improves probe response speed

✔️ Restores measurement accuracy

✔️ Extends the life of pH electrodes

✔️ Reduces the risk of incorrect readings

✔️ Suitable for all Bluelab and Milwaukee pH instruments

✔️ Easy and safe to use

✔️ Ideal for regular maintenance of measuring equipment.

📋 Instructions for use

1. Rinse the pH probe with clean water.
2. Apply a small amount of Growth Technology pH Probe Cleaner to a soft brush or directly onto the electrode.
3. Carefully clean the glass membrane without applying excessive pressure.
4. Rinse thoroughly with clean water.
5. Store the probe in pH Probe Refill and Storage.
6. Before the next use, calibrate with pH 7.0 and pH 4.0 buffer solutions.

⚠️ Important: Never store a pH electrode in distilled or deionised water. After cleaning, use pH Probe Refill and Storage to prevent the sensitive membrane from drying out and maintain measurement accuracy.

💡 Urban Botaniks tip: Clean the pH probe regularly, especially when working with nutrient solutions high in minerals. Combining pH Probe Cleaner, pH Probe Refill and Storage and regular calibration significantly extends the electrode's life and ensures reliable measurements with every use.

On Balance DZT-100-BK is a digital pocket scale equipped with a solid tray. When not used for weighing, the scale is stored compactly and conveniently in the tray.

• base made of stainless steel
• capacity: 100g
• measurement to: 0.01g
• scale dimensions: 12.7 x 7.6 x 1.9cm
• platform dimensions: 7.5 x 6.5cm
• weight: 113.2g

Instructions for use: here*

Features:

• base made of stainless steel
• capacity: 100g
• measurement to: 0.01g
• scale dimensions: 12.7 x 7.6 x 1.9cm
• platform dimensions: 7.5 x 6.5cm
• weight: 113.2g
• dimensions of the packaging: 14.5 x 8.9 x 2.5cm
• weight with packaging: 168g

Avoid:

1. Using it on uneven surfaces!
2. Using it near radio-frequency transmitters!
3. High humidity!
4. Using it near strong air currents!
5. Vibrations!
6. Extreme temperatures!

Active Eye Analogue Light Meter is an analogue light meter (lux meter)

• Easy to use.
• Battery-free.
• No calibration required.

Three three operating modes:

• X1 for CFL (fluorescent lighting systems): 0 lux - 2700 lux
• X10 - for sunlight: 2700 lux - 27 000 lux
• X100 - for MH and HPS (metal halide and sodium lighting systems): 27 000 lux - 270 000 lux

Bluelab Multimedia pH Meter allows pH measurement directly in the root zone, regardless of the plant environment - soil, keramsite, coco, mineral wool or nutrient solution.

• hardened tip of the sensor for measurements directly in the root zone
• easy two-point calibration with 30-day active period indicator
• Backlit LCD display
• low battery indicator
• automatic shut-off function
• 2 x AAA alkaline batteries (included)
• length of probe cable: 2m.
• device warranty: 5 years
• probe warranty: 6 months

The Bluelab Multimedia pH Meter is not waterproof, but will withstand accidental water splashes. If the device is splashed, dry it as soon as possible!

Full product technical specifications here!

Precisely measures pH in the root zone, regardless of the growing medium: soil, coco coir, rockwool or nutrient solution. 

• Take more and faster measurements with the fastest Bluelab pH sensor.
• Because the Bluelab Multimedia pH Meter is portable and needs no power supply to operate, it can be used anywhere and at any time.
• Calibration is easy with a single button press and the calibration solutions Bluelab pH 7.0 Calibration Solution and Bluelab pH 4.0 Calibration Solution . The successful-calibration indicator will light up on screen and disappear after 30 days to show you it is time to calibrate again.
• The Bluelab Multimedia pH Meter can be used by everyone – from hobbyists at home to growers in professional greenhouses.
• The Bluelab Leap pH Probe  is replaceable, so you can use this device for years to come.

The 5-litre measuring jug with handle is a professional tool for accurately measuring, mixing and pouring larger volumes of liquids. Made from sturdy plastic (polyethylene/polypropylene), it resists chemicals, impacts and intensive use, making it suitable for home and professional environments.

The transparent body with clearly marked graduated scales (litres and millilitres) ensures precise control when measuring and mixing liquids.

The jug has an ergonomic handle and convenient spout, allowing easy, safe pouring without spills even with larger volumes.

⚙️ Key features:

• ✔️ Capacity: 5 litres (5000 ml)
• ✔️ Material: high-quality durable plastic (HDPE / PP)
• ✔️ Clear, precise measuring scales (ml / L)
• ✔️ Ergonomic handle for a secure grip
• ✔️ Spout for precise pouring
• ✔️ Resistant to chemicals and liquids (fertilisers, oils, products)
• ✔️ Lightweight, durable and break-resistant

? Advantages:​

• Ideal for working with large liquid volumes
• Precise dosing and mixing
• Suitable for professional and home use
• Easy to clean and maintain

? Applications:

• Mixing fertilisers and nutrient solutions
• Grow systems and hydroponics
• Automotive fluids (oils, antifreeze)
• Kitchen, laboratories and technical applications

The Bluelab Leap pH Probe is a replacement pH measuring probe, suitable for the Bluelab Multimedia pH Meter or the Bluelab Combo Meter. The probe enables  pH measurement directly in the root zone, regardless of the growing medium – soil, clay pebbles, coco coir, rockwool  or nutrient solution.

• The probe tip is made of durable hardened glass, allowing fast measurements in any medium!
• completely waterproof 
• fast and accurate measurements
• warranty: 6 months

Use together with the included KCl storage cap to extend the life of the probe!

Operating and usage instructions here!

Measure pH directly in the root zone, regardless of the growing medium! Take more and faster measurements with the fastest Bluelab pH sensor. With good care and correct use (keeping the probe tip wet and cleaning it once a month), you will extend its service life. The Bluelab Leap pH Probe can be used by anyone – from hobbyists at home to growers in professional greenhouses. Replace only the pH probe, not the entire device!

Bluelab OnePen Replacement Probe is an original replacement probe designed for the professional Bluelab OnePen meter. It measures pH, electrical conductivity (EC) and temperature, restoring the meter's full accuracy without the need to buy a new meter. Thanks to the easy replacement system, changing the probe takes only seconds and significantly extends the service life of the Bluelab OnePen.

Bluelab OnePen Replacement Probe was developed as a replaceable measurement module for the Bluelab OnePen and is one of the greatest advantages of this professional meter. Instead of replacing the entire device when the electrode wears out, you only need to replace the probe, reducing costs and minimising waste.

The probe combines a high-quality double-junction pH electrode, titanium EC electrodes and a temperature sensor, providing exceptionally accurate and fast measurements of all key nutrient-solution parameters. Thanks to the materials used, it is resistant to aggressive environments and intensive daily use.

The housing is IP68 certified, providing excellent protection against water and dust. After installation, the probe is calibrated in the standard way using pH 7.0 and pH 4.0 buffer solutions and is ready for use.

Technical specifications

✔️ Manufacturer: Bluelab

✔️ Model: OnePen Replacement Probe

✔️ Type: Replacement probe

✔️ Compatibility: Only with Bluelab OnePen

✔️ Measured parameters:

• pH
• EC (Electrical Conductivity)
• Temperature

✔️ pH range: 0.0 – 14.0 pH

✔️ EC range: 0.0 – 10.0 EC

✔️ CF range: 0 – 100 CF

✔️ TDS (500 Scale): 0 – 5000 ppm

✔️ TDS (700 Scale): 0 – 7000 ppm

✔️ Temperature range:

0 – 50°C

32 – 122°F

✔️ Double Junction pH technology

✔️ Titanium EC electrodes

✔️ Automatic temperature compensation

✔️ Water- and dust-resistant IP68 construction

✔️ Quick and easy tool-free replacement

📦 The set includes

✔️ 1 × Bluelab OnePen Replacement Probe

✔️ 1 × Buffer solution pH 7.0 (18 ml)

✔️ 1 × Buffer solution pH 4.0 (18 ml)

✔️ 1 × KCl Storage Solution – storage solution (18 ml)

Benefits

✔️ Replace only the probe, not the entire device

✔️ Significantly extends the life of the Bluelab OnePen

✔️ Simultaneously measures pH, EC and temperature

✔️ Double-junction pH electrode for longer life

✔️ High-resistance titanium EC electrodes

✔️ High accuracy and rapid reading stabilisation

✔️ Easy replacement in seconds

✔️ IP68 protection against water and dust

✔️ Reduces maintenance costs

✔️ Genuine Bluelab replacement component

🔧 Application

Suitable for:

• Bluelab OnePen

• Hydroponic systems

• Coco coir substrate

• Soil cultivation

• Aquaponics

• Measuring nutrient solutions

• Greenhouses

• Professional horticulture

• Laboratory applications

📋 How to use

1. Unscrew the old probe from the Bluelab OnePen.
2. Install the new replacement probe.
3. Calibrate the probe with pH 7.0 and pH 4.0 buffer solutions.
4. Rinse the probe with clean water after every use.
5. Always store the electrode in the included KCl Storage Solution when the instrument is not in use.

⚠️ Important: The average service life of the probe is approximately 18 months, depending on use and maintenance. Regular cleaning, proper storage and periodic calibration can significantly extend its lifespan. The probe comes with a 6-month limited warranty.

💡 Urban Botaniks tip: If you notice slower stabilisation of readings or difficulties calibrating the Bluelab OnePen, the most common cause is a worn probe. Replacing it restores the factory measurement accuracy and is a significantly more economical solution than buying a new instrument.

Milwaukee EC45 PRO is a professional instrument for rapid measurement of electrical conductivity (EC), total dissolved solids (TDS) and Conductivity Factor (CF) in nutrient solutions. Designed specifically for hydroponics, greenhouses, fertigation systems and professional horticulture, it provides instant measurements without calibration. Its IP67 waterproof housing floats on water and is suitable for daily use in reservoirs and mixing tanks.

Milwaukee EC45 PRO is designed for growers who want to monitor nutrient-solution concentration quickly and reliably. Maintaining the correct EC value is essential for optimal nutrient uptake and preventing plant deficiency or overfeeding. EC45 PRO measures EC, TDS (500 and 700 ppm scale) and CF, allowing use of the grower's preferred measurement system.

The instrument is exceptionally easy to use – simply immerse the measuring section in the solution. It has no buttons, switches on automatically when immersed and, once the reading stabilises, switches itself off after about 30 seconds, greatly extending battery life. The bright 24-LED indicator shows the measured value, battery status and warnings for values outside the measurement range.

Unlike standard EC testers, EC45 PRO is factory calibrated and does not require periodic user calibration. The graphite electrodes resist build-up, and the robust housing allows the instrument to be used as a stirring rod when preparing nutrient solutions. Thanks to automatic temperature compensation, readings remain accurate between 5°C and 50°C.

Technical specifications

✔️ Manufacturer: Milwaukee Instruments

✔️ Model: EC45 PRO

✔️ Type: EC / TDS / CF meter

Measurement ranges

✔️ EC: 0.2 – 6.0 mS/cm

✔️ TDS (500): 100 – 3000 ppm

✔️ TDS (700): 140 – 4200 ppm

✔️ CF: 2 – 60 CF

Resolution

✔️ EC: 0.1 mS/cm (up to 4.0 mS/cm)

✔️ EC: 0.25 mS/cm (4.0 – 6.0 mS/cm)

✔️ TDS 500: 50 ppm / 125 ppm

✔️ TDS 700: 70 ppm / 175 ppm

✔️ CF: 1 CF / 2.25 CF

✔️ Accuracy: ±4% of reading ±1 digit

✔️ Automatic temperature compensation: 5 – 50°C

✔️ Factory calibrated

✔️ Graphite electrode

✔️ LED display with 24 blue LEDs

✔️ Automatic switch-on

✔️ Automatic shut-off

✔️ Power supply: 3 × AA alkaline batteries

✔️ Battery life: up to 3 years (about 10 measurements per day)

✔️ Protection: IP67

✔️ Floating housing

✔️ Dimensions: 444 × Ø30 mm

✔️ Weight: 265 g (with batteries)

📦 The kit includes

✔️ 1 × Milwaukee EC45 PRO Nutrient Stick Meter

✔️ 3 × AA alkaline batteries

✔️ Protective cap

✔️ User manual.

Benefits

✔️ Measures EC, TDS and CF with one instrument

✔️ No calibration required

✔️ Automatic power on and off

✔️ Waterproof housing IP67

✔️ Floats if dropped in water

✔️ Highly durable graphite electrodes

✔️ Automatic temperature compensation

✔️ Clear LED indication

✔️ Suitable for everyday professional use

✔️ Works as a measuring instrument and stirring rod at the same time.

📋 Instructions for use

1. Remove the protective cap.
2. Immerse the electrode in the nutrient solution.
3. Gently stir the solution with the instrument for an even measurement.
4. Wait for the LED indication to stabilize.
5. When finished, rinse the electrode with clean water.
6. When necessary, clean the electrode periodically according to the manufacturer's instructions.

⚠️ Important: Although the EC45 PRO does not require calibration, the manufacturer recommends regular cleaning of the graphite electrodes to prevent salt and nutrient residue buildup, which can affect measurement accuracy.

💡 Urban Botaniks tip: Check the EC value daily, especially when growing hydroponically. This will help you maintain the optimal nutrient solution concentration, avoid salt buildup, and ensure maximum plant growth and yield.

Bluelab PeriPod M4 enables automated maintenance of ideal pH and nutrient levels in your reservoir.

• 1x 120 ml/min peristaltic pump for dosing pH-adjustment solutions
• 3x 120 ml/min peristaltic pumps for nutrient dosing
• robust housing and wall-mounting capability
• individual pump priming and calibration
• replaceable peristaltic pumps and tubing
• 4 m of alkali-resistant tubing for pH adjuster dosing
• 3x 4 m tubing for nutrient solution dosing
• compatible with most modern growing systems, including recirculating and standard run-to-waste systems
• compatible with Bluelab Pro Controller

*Please note: Only pumps from the M series (M3 and M4) can be connected together. L3 can be connected only with other L3 units

Instructions in English for the use and operation of peristaltic dosing pumps here.

Instructions in English for replacing a peristaltic dosing pump here.

Instructions in English for replacing dosing tubing here.

Instructions in English for replacing a peristaltic dosing pump cartridge here.

Stop wasting valuable time on manual dosing and nutrient solution preparation! Bluelab PeriPod M4 is a simple device designed to work with the Bluelab Pro Controller, together forming your optimal solution for dosing nutrients into the reservoir. Bluelab PeriPod M4 responds to signals from the Bluelab Pro Controller and, through its peristaltic pumps, starts dosing and pumping pH adjuster and nutrient solutions into your reservoir. Measure, control and maintain pH levels precisely.

MA73600 is a replacement pH probe for Milwaukee pH51 and Milwaukee pH54 testers (sold separately).

• measures: pH and temperature of solutions
• easy installation
• measurement range: 0.0 - 14.0 pH
• resolution: 0.1 pH
• measurement accuracy: ±0.1 pH
• warranty: 6 months

Key features:

• Compatible with: Milwaukee pH51 and Milwaukee pH54 testers.
• Easy installation: slide the probe into the tester and screw it in for secure attachment.
• Reliability: ensures accuracy and long-lasting use.
• Convenience: designed for quick replacement, without the need for special tools.

Proper probe maintenance will give you fast, accurate results for longer. Here are our top four tips.

1. Always store it with the cap filled with buffer or MA9015 storage solution, and not water.
2. Clean your probe regularly by soaking it in MA9016 cleaning solution.
3. Calibrate after cleaning and/or storage before testing to correct changes in the pH and EC sensor.
4. Gently stir the probe in the sample for a faster result.

Water Master pH Probe Refill & Storage Solution KCl 300 ml is a professional solution based on potassium chloride (KCl), designed for the proper storage and maintenance of pH probes and electrodes. It keeps the sensitive membrane constantly hydrated, prevents it from drying out and helps maintain the accuracy and long service life of pH measuring instruments.

Proper storage of the pH probe is an essential part of its maintenance. If the glass electrode dries out, its sensitivity gradually decreases, leading to inaccurate measurements, slower response and a shorter service life. Water Master pH Probe Refill & Storage Solution was developed specifically to prevent this problem by keeping the electrode constantly hydrated and ready for use.

The solution is suitable both for storage and for topping up electrolyte in compatible refillable pH probes. After measurement, the electrode should be rinsed with clean or distilled water, then the protective cap should be filled with a small amount of the KCl solution so that the probe tip remains constantly moist.

Water Master KCl Storage Solution is compatible with most pH testers and pH meters using a glass electrode, regardless of the manufacturer. Regular use reduces measurement drift, facilitates calibration and significantly extends the life of the electrode.

Technical specifications

✔️ Manufacturer: Water Master

✔️ Type: Storage and refill solution for pH probes

✔️ Main ingredient: Potassium chloride (KCl)

✔️ Capacity: 300 ml

✔️ Purpose: Storage and maintenance of pH electrodes

✔️ Suitable for most pH meters with a glass electrode

✔️ Prevents the electrode from drying out

✔️ Improves measurement accuracy and stability

✔️ Suitable for home and professional use.

🔧 Applications

Suitable for:

• pH testers

• pH meters

• pH probes

• Hydroponic systems

• Coco substrates

• Soil growing

• Aquaponics

• Aquariums

• Laboratories

• Water quality monitoring.

📋 Instructions for use

1. After completing a measurement, rinse the pH probe with clean or distilled water.
2. Pour a small amount of KCl Storage Solution into the electrode's protective cap.
3. Fit the cap so that the electrode tip remains in constant contact with the solution.
4. If using a refillable probe, top up the solution according to the manufacturer's instructions.
5. Replace the used solution regularly – do not return used liquid to the bottle, to avoid contamination.

⚠️ Important: Never store a pH electrode in distilled or deionised water. This can damage the sensitive membrane and reduce measurement accuracy. Always use a dedicated KCl solution for storage.

💡 Tip from Urban Botaniks: Combine this solution with Water Master pH Probe Cleaner: clean the probe first, then store it in the KCl solution. This will ensure maximum measurement accuracy and significantly extend the life of the pH electrode.

Milwaukee MI56P is a replacement pH probe for Milwaukee pH55 and Milwaukee pH56 (sold separately).

• measures: pH and temperature of solutions
• easy installation
• measurement range: 0.0 - 14.0 pH
• resolution: 0.1 pH
• measurement accuracy: ±0.1 pH
• warranty: 6 months

Key features:

• Compatible with: Milwaukee pH55 and Milwaukee pH56 testers.
• Easy installation: slide the probe into the tester and screw it in for secure attachment.
• Reliability: guarantees accuracy and long-lasting use.
• Convenience: designed for quick replacement, without the need for special tools.

Proper probe maintenance will give you fast, accurate results for longer. Here are our top four tips.

1. Always store it with the cap filled with buffer or MA9015 storage solution, and not water.
2. Clean your probe regularly by soaking it in MA9016 cleaning solution.
3. Calibrate after cleaning and/or storage before testing to correct changes in the pH and EC sensor.
4. Gently stir the probe in the sample for a faster result.

Practical, compact handled measuring cup with a 250 ml capacity — a convenient tool for precise liquid measurement in the kitchen, laboratory, garden or when preparing solutions and mixes.

Capacity: 250 ml

Material: plastic

Automate control of your solution's pH with the Milwaukee MC720 PRO pH Controller and Pump Kit. The kit includes:

• 1x controller with pH probe Milwaukee MC122 PRO pH Controller
• 1x dosing pump Milwaukee MP810 1.5l/h (25ml/min)

Bluelab pH Controller Wi-Fi monitors and adjusts nutrient-solution pH levels for you!

• Automatic pH control and monitoring in reservoirs up to 7600l.
• Large, easy-to-read display with green backlight
• Easy-to-use menu for programming and setup
• Easy pH calibration using on-screen instructions
• Flashing alarms for low or high values
• Dosing locks to protect against overdosing
• Automatic resumption of dosing after restart in the event of a power outage
• Waterproof design with wall-mounting option
• 4m alkali-resistant pH-adjuster dosing tube
• Use with undiluted pH adjuster
• Bluelab pH Probe probe: included
• Replaceable peristaltic pump and tubing
• warranty for the unit and temperature probe: 2 years
• warranty for the Bluelab pH Probe probe: 6 months

Product technical specifications here and here!

Hands-free monitoring and dosing of solution pH levels, simply and without your intervention! We know pH levels can make the difference between a great harvest and a poor one. Constantly measuring and correcting the pH levels of nutrient solutions can take time. Our smart pH controller automatically monitors and fine-tunes pH levels for you. Set your pH parameters and let Bluelab pH Controller maintain them using pH Up or pH Down, but not both. Simply set the parameters and leave the rest to Bluelab pH Controller. So do not worry, relax...

Milwaukee MW600 PRO is a professional portable dissolved oxygen (Dissolved Oxygen – DO) meter designed for aquaculture, hydroponics, laboratories, wastewater treatment plants and water analysis. The instrument provides fast, reliable measurements in the range 0.0 – 19.9 mg/L, features automatic temperature compensation (ATC) and a high-quality MA840 polarographic probe for maximum accuracy in daily use.

Dissolved oxygen is one of the most important indicators of water quality. It directly affects plant development in hydroponic systems, fish health in aquaculture and the efficiency of biological processes in water treatment. Milwaukee MW600 PRO is designed to provide accurate and reliable measurements both in laboratory conditions and in the field.

The instrument uses a MA840 polarographic probe with automatic temperature compensation, which eliminates the effect of temperature on the results. Calibration is easily performed at two points – in 100% saturated air and in a zero-oxygen solution, ensuring high measurement accuracy.

The large LCD display clearly shows the measured values, while the compact housing makes MW600 PRO easy to carry and use on site. The instrument is especially suitable for monitoring oxygen in nutrient solutions, reservoirs, ponds, aquariums, fish farms and various water systems.

The polarographic probe has a replaceable membrane and electrolyte, making maintenance easier and significantly extending the service life of the measuring system. Low power consumption provides up to approximately 70 hours of continuous operation on a single 9V battery.

Technical specifications

✔️ Manufacturer: Milwaukee Instruments

✔️ Model: MW600 PRO

✔️ Type: Portable DO meter (Dissolved Oxygen)

✔️ Measurement range: 0.0 – 19.9 mg/L

✔️ Resolution: 0.1 mg/L

✔️ Accuracy: ±1.5% Full Scale (@25°C)

✔️ Temperature compensation: Automatic (0 – 30°C)

✔️ Calibration: Manual, 2-point

✔️ Display: LCD, 3½ digits

✔️ Probe: MA840 polarographic probe

✔️ Cable length: 3 m

✔️ Operating temperature: 0 – 50°C

✔️ Maximum humidity: 95% RH

✔️ Power supply: 1 × 9V alkaline battery

✔️ Battery life: approximately 70 hours

✔️ Dimensions: 143 × 80 × 32 mm

✔️ Weight: 220 g (with battery)

📦 The kit includes

✔️ 1 × Milwaukee MW600 PRO measuring instrument

✔️ 1 × Polarographic probe MA840 with 3 m cable

✔️ 2 × Spare membranes

✔️ 1 × Bottle of electrolyte MA7040 / MA9071

✔️ 1 × Calibration screwdriver

✔️ 1 × 9V alkaline battery

✔️ 1 × User manual

🔧 Applications

Suitable for:

• Hydroponic systems

• Aquaculture and fish farms

• Aquariums

• Ponds

• Wastewater treatment plants

• Laboratories

• Drinking and wastewater analysis

• Water quality control

• Research activities

📋 Instructions for use

1. Connect the MA840 probe to the instrument.
2. Remove the protective cap and make sure the membrane is clean and filled with electrolyte.
3. Calibrate the instrument according to the manufacturer's instructions.
4. Immerse the probe in the solution being measured and wait for the readings to stabilize.
5. After measurement, rinse the probe with clean water.
6. Store the probe with the protective cap fitted and periodically check the condition of the membrane and electrolyte.

⚠️ Important: For maximum accuracy, the manufacturer recommends regular calibration, periodic membrane replacement and topping up the electrolyte when needed. A damaged or contaminated membrane can lead to inaccurate measurements.

💡 Urban Botaniks tip: In hydroponic growing, maintaining high levels of dissolved oxygen in the nutrient solution supports healthy root development, improves nutrient uptake and reduces the risk of root diseases.

Take quick and easy measurements directly in your plants' soil with Milwaukee MW101-SOIL PRO! 

The Milwaukee MW101-SOIL PRO is designed to measure pH directly in soil, making it ideal for use in professional horticulture and agriculture, but can also be used in hydroponics.

• fast and easy-to-read results with a large digital LCD display
• accuracy up to ±0.02 pH, measurement range 0.00 - 14.00 pH
• lightweight and portable
• easy measurement: just insert the probe directly into the soil of your plants and wait for the reading to stabilize
• easy manual two-point calibration for increased accuracy
• automatic shut-off (auto-off) function 

Instructions for use and technical specifications here.

Features:

• measurement range: 0.0 - 14.0 pH
• resolution: 0.1 pH
• measurement accuracy: ± 0.1 pH
• temp. compensation: manual, 0 - 50°C
• calibration: manual, 2-point
• calibration: calibration solution pH 7.01 - 20ml and calibration solution pH 4.01 - 20ml
• pH electrode: Milwaukee MA920B/1 Direct Stick Measurement pH Probe with 3m. cable
• working environment: 0 - 50°C; max. 95% RH
• battery type: 1 x 9V (included)
• battery life: about 300 hours of use
• dimensions: 14.5 x 7.9 x 4 cm
• weight: 220 g (with batteries)
• device warranty: 2 years
• probe warranty: 6 months

You can extend the life of your pH electrode as follows:

1. Storage: The pH probe must be kept hydrated. Long periods of dry storage will harm the probe's sensitivity. Allowing the probe to dry may also cause deposits and clogging at its tip. Storing it in MA9015 storage solution or pH calibration buffers will help address both issues. Do not store in tap water or distilled water! This will damage the probe's sensitivity. The best way to store the probe is with the probe cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that the electrode be stored upright to further reduce the potential for leakage.
2. Cleaning: Deposits on the probe tip from the mineral salts of the nutrient solution or from organic material can affect its sensitivity and clog it. We recommend regularly soaking your electrode in MA9016 cleaning solution.
3. Calibration: the glass tip of the pH probe becomes less sensitive over time, so make sure to calibrate regularly to keep your meter accurate. Also calibrate after cleaning or a long period of storage.

The Bluelab Connect Stick is a USB flash drive that lets you record nutrient solution measurement data and monitor it wirelessly.

• Ability to record collected data [when used together with Bluelab Connect products (sold separately)]
• Download and install the Bluelab Connect software for FREE
• Monitor the data and its current status through Google Docs (a computer with continuous internet access is required)
• 2-year warranty

The Bluelab Connect Stick receives wireless data from Bluelab Connect Monitors, recording it in the cloud. One Bluelab Connect Stick USB flash drive can receive data from several Bluelab Connect devices. Simply plug the Bluelab Connect Stick into your computer's USB port, download and install the Bluelab Connect software for FREE, to start monitoring crop performance wirelessly. View readings from your computer or mobile device to know whether your crop needs attention. Add other Bluelab Connect devices to the software with one click.

Product technical specifications here!

The Bluelab Combo Meter is everything you need for simple, reliable crop growing!

• easy to use, clean and calibrate
• measures pH, conductivity (EC, CF, ppm700 and ppm500) and temperature (°C, °F) of the nutrient solution
• simple two-point calibration (pH)
• No calibration required for the conductivity/temperature probe (factory calibrated)!
• 2-metre cable for measurements in hard-to-reach places
• Bluelab pH Probe: included
• device warranty: 5 years
• probe warranty: 6 months
   

The Bluelab Combo Meter is not waterproof, but it will withstand accidental water splashes! If the device gets splashed, dry it as quickly as possible!

Full product technical specifications here!

The Bluelab Combo Meter is a portable pH, conductivity and temperature meter – all in one. If you are experiencing yellow leaves or slow growth, the Bluelab Combo Meter will show you whether each parameter meets your plants’ requirements. Adjustments can be made quickly to get your crop back on track. The Bluelab Combo Meter has two probes – the Bluelab pH Probe and a conductivity/temperature probe. To take measurements, simply place them in the nutrient solution and the data will appear on the screen. Because the Bluelab Combo Meter is portable and does not need mains power to operate, it can be used anywhere, at any time, to help you meet your plants’ daily nutrient needs. Calibration is easy, with a single button press and the Bluelab pH 7.0 Calibration Solution and Bluelab pH 4.0 Calibration Solution. The successful-calibration indicator lights up on the screen, then disappears after 30 days to let you know that you need to calibrate again. The Bluelab pH Probe is replaceable, so you can use this meter for years to come.

• easy to use, clean and calibrate
• ​large, easy-to-read display
• selectable temperature units (°C or °F)
• measures pH, conductivity (EC, CF, ppm700 and ppm500) and temperature (°C, °F) of the nutrient solution
• simple two-point calibration (pH)
• No calibration required for the conductivity/temperature probe (factory calibrated)!
• 2-metre cable for measurements in hard-to-reach places
• Bluelab pH Probe: included
• 2 x alkaline AAA batteries (included)
• automatic shut-off function
• device warranty: 5 years
• probe warranty: 6 months

Bluelab pH Meter is one of the best instruments on the market for measuring the pH and temperature of nutrient solution!

​

• lightweight and portable (easy to carry)
• large, easy-to-read display
• easy one-button pH calibration
• tick icon indicating successful calibration
• 2 x alkaline AAA batteries (included)
• low battery indicator
• automatic shut-off function
• Bluelab pH Probe probe: included
• probe cable length: 2m.
• instrument warranty: 5 years
• probe warranty: 6 months 

Bluelab pH Meter is not waterproof, but it will withstand accidental water splashes. If the instrument is splashed, dry it as quickly as possible!

Full product technical specifications here!

Precisely measures the pH value of the nutrient solution so you know whether any adjustments are needed. All plants need a specific pH level for maximum nutrient uptake from the solution. If you do not control pH levels, plants will not be able to absorb the elements they need for good, vigorous growth. 

• Bluelab pH Meter is the perfect portable way to accurately measure the pH value of nutrient solution, so you can add the required amount of pH- or pH+ to get growth back on track. Simply place the Bluelab pH Probe probe into the solution and the measurement value will appear on the screen.
• As the Bluelab pH Meter is portable and does not need mains power to operate, it can be used anywhere, at any time.
• Calibration is easy with a single button press and the calibration solutions Bluelab pH 7.0 Calibration Solution and Bluelab pH 4.0 Calibration Solution . The successful-calibration indicator will light up on screen and disappear after 30 days to show you it is time to calibrate again.
• Bluelab pH Meter can be used by everyone – from home enthusiasts to gardeners in professional greenhouses.
• Bluelab pH Probe probe is replaceable, so you can use this instrument for years to come.