Fertilisers and Additives — Fertilisers and Additives

GHE - T.A. - FinalPart (formerly Ripen) is a complete fertiliser / stimulant for the late flowering phase, which requires no additional additives. It increases flowering and the production of active ingredients and eliminates excess nutrients.

• accelerates the ripening process
• increases yield and the intensity of flavour/aroma
• increases the production of essential oils and active ingredients
• eliminates excess nutrients, which improves flavour

​How to use FinalPart:

• For hydroponic growing: Replace the old nutrient solution with pH-adjusted water and add up to 5 ml of FinalPart per 1 L of water, to match or slightly exceed your previous EC (up to 2.6) and mix well. Apply for 10 days or as long as needed, then use FlashClean® to finish or harvest directly.
• For growing in coco: Add up to 5 ml of FinalPart per 1 L of water with pH adjusted to match or slightly exceed your previous EC (up to 2.6) and mix well. Apply for 12–13 days or as long as needed, then use FlashClean® to finish or harvest directly. 
• For growing in soil: Add up to 4 ml of FinalPart per 1 L of water with pH adjusted to match or slightly exceed your previous EC (up to 2.0). Apply until the leaves yellow and/or ripening is satisfactory. This may take 10 to 20 days. Then use FlashClean® to finish or harvest directly.
• Experts can use FinalPart® to manage water stress, maximise the concentration of active ingredients and minimise splitting in soft-fruit crops: aim to maintain EC=2.6mS in hydroponic growing and EC=2.0mS in soil.

Note: dissolve the desired amount of FinalPart in water with pH adjusted between 5.5 and 6.5 and mix well! 

Use FinalPart as follows:

• Always use FinalPart on its own! 
• Do not combine it with other nutrients, fertilisers or additional boosters while using FinalPart,  because it contains everything the plant needs to ripen and complete its life cycle!
• FlashClean: FlashClean helps FinalPart reach its full potential.

1. Before applying FinalPart, FlashClean removes all residual nitrogen and other mineral salts from the substrate.
2. After you have finished applying FinalPart, a rinse with FlashClean can help improve the flavour of your harvest.

CANNACURE is a unique foliar enhancer that prevents and controls pest and mildew outbreaks. It is eco-friendly and toxin-free. CANNACURE delivers healthier plants, larger flowers and higher yields.

The natural way to control pests

Mildew, whitefly, aphids, spider mites, mealybugs ... The world is full of diseases, pests and parasites looking for an opportunity to infect your plants and destroy your crop. Of course, you want to protect your plants in the best possible way. But how? Strong chemical pesticides may do the job, but they pollute the environment and poison your flowers and fruit. Yet, traditional methods of disease and pest control generally just do not work well enough.
CANNACURE is a product that has it all. Eco-friendly, it eliminates pests and mildew while stimulating growth and flowering.
CANNACURE is CANNA's first product for controlling pests and diseases. Developed in CANNA's research laboratories, it is unlike any other plant protection product because it is also a foliar enhancer. It provides healthier plants that can focus on producing large flowers and higher yields. It is not only CANNA scientists who are convinced of the product's quality. Since its launch, it has received praise from many growers.

How does it work?

When you spray CANNACURE, it forms a second natural "skin" on your plants. This layer improves the colour and vitality of the leaves while ensuring that the plants can still breathe. It makes them healthy, glossy and clean, enabling optimal photosynthesis. This allows the plants to focus on flowering.
Any plant pests will become trapped in the sticky layer, so they cannot damage the leaves. Ultimately, the pests will starve to death. Combined with other CANNA nutrients and additives, CANNACURE will help your plants withstand future infestations and diseases.

How to use CANNACURE?

It is very important to apply CANNACURE thoroughly to both sides of the leaves. Use CANNACURE once a week as a preventative measure to ensure that pests cannot attack the leaves. If you have a severe infestation of mildew, whitefly or spider mites, for example, spray every three days and repeat, if necessary, after another three days. Then continue spraying weekly as usual.
CANNACURE can be used from the start of growth until harvest, alongside your usual feeding regime.

User instructions:

• Dilute 330ml of concentrate per 1 litre of water
• Spray at least once a week, until harvest
• Apply with a fine sprayer to achieve maximum effectiveness
• Do not prepare the solution more than ten days in advance
• Do not use together with products containing hydrogen peroxide (H₂O₂)
• Do not mix with any other product — mix with water only
• Use CANNACURE together with your nutrients or other feeds

Storage, health and safety, and other guidance:

• Shake the bottle well before use!
• Store closed, in a dark place; protect from freezing!
• Keep out of reach of children!

GHE - T.A. - Fulvic (Diamond Nectar formerly) is the finest, highest-quality fulvic acid on the market. Soluble humates help plants absorb minerals more easily, making nutrients more effective.

• ultra-pure, 100% natural biostimulant
• better root development
• healthier, more disease-resistant plants
• improved aroma and flavour quality
• increased essential-oil production
• significantly higher yields

How to use Fulvic:

When watering:

• at the first leaves: 20 ml per 10 L of water
• during the growth phase: 20 ml per 10 L of water
• during the pre-flowering period: 20ml per 10l of water

As a foliar spray:

• at the first leaves: 30 ml per 10 L of water
• during the growth phase: 30 ml per 10 L of water
• during the pre-flowering phase: 30 ml per 10 L of water

Use Fulvic with:

• all nutrients – mineral or organic, from GHE or other brands
• any substrate, hydroponics or outdoor cultivation

Citrus Focus with seaweed is a concentrated liquid fertiliser, specially formulated for citrus plants, made from pure mineral salts enriched with complex organic plant acids and concentrated kelp extract. It encourages healthy growth, flowering and abundant fruiting.

• contains all essential nutrients for all citrus plants
• suitable for: oranges, lemons, grapefruit, mandarins and limes
• with calcium oxide and micronutrients
• contains no carbamides (urea)

How to use Citrus Focus:

• Dilute 10 ml Citrus Focus in 1 litre of clean water and use it with every watering. For plants grown in pots or containers, water until it runs into the saucer.

Content % w/v:

• Total nitrogen (N): 2.31
• Nitrate nitrogen: 2.11
• Ammoniacal nitrogen: 0.20
• Readily soluble phosphorus (P₂O₅): 1.22 (0.53)
• Readily soluble potassium (K₂O): 3.82 (3.17)
• Readily soluble calcium (CaO): 1.01 (0.72)
• Chelated copper EDTA (Cu): 0.002
• Chelated iron EDTA (Fe): 0.040
• Chelated manganese EDTA (Mn): 0.010
• molybdenum (Mo): 0.001
• Chelated zinc (Zn): 0.0025
• Also contains: magnesium (Mg), sulphur (S), boron (B), humic acid and fulvic acid.

GHE - T.A. - Pro Bloom is a super-concentrated flowering booster that increases the quality and quantity of the harvest.

• increases flowering and growth by up to 20%
• increases calcium absorption
• increases leaf size
• activates microbial life and stimulates plants' immune system

How to use Pro Bloom:

Only during flowering / fruiting!

• To add to water or nutrient solution (in hydroponics, coco or soil): 2ml per 10L of water

• If necessary, dilute for use as a foliar spray, but avoid spraying flowers: 1ml per 10L of water

Use Pro Bloom with:

• all plants
• all substrates, hydroponics or outdoor growing

TA FlashClean is

• prevents clogging of irrigation-system drip emitters
• protects plants from stress and root damage
• corrects the nutrient balance
• addresses so-called nutrient "lockout"
• nourishes microbial life and refreshes soil and coco
• boosts growth in the final stage (especially with FinalPart)

How to use FlashClean:

Unlike other flushing products on the market, FlashClean is not an acid, contains no enzymes and does not discharge magnesium or other mineral additives into your system, making it uniquely versatile: you can treat your plants with it at any time during growth or flowering, but no more than once every two weeks!

In recirculating hydroponic systems:

• To refresh before changing nutrients (including before FinalPart): add 1.5 to 3ml/l. FlashClean to the existing nutrient solution and let the system circulate for 24 hours before draining and replacing it with fresh nutrient solution. Use the lower dose for young or delicate plants and the higher dose for established plants or those close to harvest.
• After overfeeding or nutrient "lockout": drain the old nutrient solution, add 1.5 to 3ml/l. FlashClean to pH-adjusted water (you do not need to fill the entire reservoir, only enough for the system to circulate and operate freely). Let it circulate for 24 hours before draining and adding fresh new nutrient solution. Use the lower dose for young or delicate plants and the higher dose for established plants or those close to harvest.
• For a final flush (after FinalPart): drain the old nutrient solution, add 1.5 to 3ml/l. FlashClean to pH-adjusted water (you do not need to fill the entire reservoir, only enough for the system to circulate and operate freely). Let it circulate for the final two days before harvest, to raise plant sugar levels instead of losing aroma and active-compound content through a longer water flush.

In soil, coco or another substrate (clay pebbles, perlite):

• For a refresh before changing nutrients (including before FinalPart and after overfeeding or nutrient "lockout"): every 15 days (or when needed after lockout, etc.): fill a watering can with fresh, pH-adjusted water and add 1.5 to 3 ml/l. FlashClean. Water until it drains into the saucer / through the bottom of the pot. Resume the regular feeding schedule with the next watering. Use the lower dose for young or fragile plants and the higher dose for developed plants / plants close to harvest.
• For a final "flush" (after FinalPart): add 3 ml/1 l of water FlashClean instead of base nutrients during the final two days before harvest to increase sugar levels in plants, rather than losing aroma and active-compound content through a longer water-only "flush".

Note: with FloraKleen you can treat your plants at any stage of growth or flowering, but no more than once every two weeks!

Use with: all fertilisers and substrates, but especially with FinalPart:

• FlashClean helps FinalPart reach its full potential. By flushing nitrogen and other mineral salts from the substrate, FinalPart will work more effectively, mobilising nitrates and improving the final aroma / flavour of the harvest.
• Before harvest, instead of 10 days of water-only "flush", try 2 with FlashClean—growers around the world do it because, in commercial production, 8 extra days of harvest are a major benefit!

Orchid Focus BLOOM is a specially formulated fertilizer for Phalaenopsis (at all stages) and for the flowering period of Cymbidium, Dendrobium, Odontoglossum, Cambria, Brassia, Miltonia and others. It contains all essential nutrients for producing abundant flowers.

• specialised formula for healthy and abundant flowering of orchids
• suitable for most species and hybrids
• made from pure mineral salts, enriched with concentrated organic plant acids
• N-P-K: 1.1 : 1.5 : 2.4
• contains no urea*

*Note: urea damages the sensitive roots of orchids. Never treat your orchids with a fertilizer containing urea!

How to use Orchid Focus BLOOM:

1. Dilute 5 ml in 2 litres of lukewarm water (soft / osmosis or rainwater is best).
2. For Cymbidium orchids, dilute 20 ml in 2 litres of lukewarm water. 
3. For all orchid species, apply with every other watering!
4. In addition, orchids benefit from misting and the humidity it creates. For best results, lightly mist the leaves and roots with Orchid Myst 2-3 times a week.

Content % w/v:

• nitrogen (N): 1.13
• Easily soluble phosphorus (P₂O₅): 1.49 (0.65)
• potassium (K₂O): 2.41 (2.00)
• calcium oxide (CaO): 1.01 (0.72)
• Chelated copper EDTA (Cu): 0.002
• Chelated iron EDTA (Fe): 0.040
• Chelated manganese EDTA (Mn): 0.010
• molybdenum (Mo): 0.001
• Chelated zinc (Zn): 0.0025
• Also contains: magnesium (Mg), sulphur (S), boron (B), humic and fulvic acids

GHE - T.A. - NovaMax Grow (formerly FloraNova) is the most concentrated 1-component liquid fertiliser for growth on the market. It can be used for growing in hydroponics, coco or soil. Flora Nova Grow is a true breakthrough in fertiliser technology, combining all the substances your plants need in just one bottle. With it, you will not need additional additives (such as CalMag / PK / Trace elements) to ensure healthy growth. Its unique formula of highly purified minerals and natural additives, including humic extracts, enables it to work well with every type of plant.

• the most concentrated 1-component fertiliser for growth on the market
• everything your plants need in just 1 bottle
• no need for additives (CalMag / PK / Trace elements)
• very economical
• works well with every plant type

How to use NovaMax Grow:

• Shake well before each use and mix thoroughly with water!

For growing in soil:

• when the first roots develop: 1ml. per 10l. water
• when the first leaves appear: 8ml. per 10l. water
• during the growth period: 12ml. per 10l. water
• during the pre-flowering period: 8ml per 10L of water

For growing in hydroponics and coco:

• when the first roots develop: 3ml. per 10l. water
• when the first leaves appear: 10ml. per 10l. water
• during the growth period: 15ml. per 10l. water
• during the pre-flowering period: 10ml per 10L of water

You can use Flora Nova Grow with:

• Works for growing all plants and substrates – soil, hydroponics, coco, both indoors and outdoors.
• Fulvic is the best and highest-quality fulvic acid on the market, which we recommend for further increasing and improving the harvest, in addition to the main nutrient fertilisers.
• TrikoLogic provides beneficial micro-organisms in the root zone, TrikoLogic S adds increased protection and additional performance, especially at high temperatures.
• General Organics additives: The General Organics range includes high-quality organic additives for fine-tuning and improving your harvest.

The product Bio Flores is developed for the flowering phase of plants.

User instructions:

• Shake well before use
• Dissolve approximately 40ml of concentrate in 10L of water (1: 250)
• Depending on the plants' pot and nutrient requirements, use 1-3 times per week when growing in fertile soil
• The diluted nutrient solution should not be acidified
• Use the mixed solution within 24 hours
• When using drip irrigation: to prevent clogging, always flush the pipes with water

Storage, health and safety, and other guidance:

• BIOCANNA developed BIOCANNA Bio Vega specifically for the plant's growth phase!
• Store in a dark place; protect from frost.
• Keep out of reach of children!

GHE - T.A. - TriPart Micro Hard Water (FloraMicro H/W) is part of the 3-component TriPart base nutrient range TriPart (formerly the Flora range) from the GHE and T.A. (Terra Aquatica) family, designed for use with hard/tap water (more than 70mg calcium/1L).

• for hard/tap water
• the "building block" that provides micro- and sub-micro nutrients as well as additional macro nutrients.
• use TriPart® Micro as directed throughout the growth and flowering periods

How to use TriPart®:

• Shake the bottles well before each use!
• Add each part separately, always stirring well afterwards!
• Always add the components in this order: Micro - Grow - Bloom!!!
• If you use one measuring cup/jug, rinse it thoroughly before adding the next part and after use!

How to use TriPart Micro:

For growing in soil:

• when the first roots develop: 2ml per 10l of water
• when the first leaves appear: 6ml per 10l of water
• during the growth period: 10ml per 10L of water
• during the pre-flowering period: 15ml per 10l of water
• during the flowering period: 14ml per 10L of water

For hydroponic and coco growing:

• when the first roots develop: 5ml per 10l of water
• when the first leaves appear: 10ml. per 10l. water
• during the growth period: 12ml. per 10l. water
• during the pre-flowering period: 20ml per 10l of water
• during the flowering period: 16ml per 10L of water

Use TriPart® with:

• TriPart works for growing all plants in every substrate - soil, hydroponics and coco, both indoors and outdoors.
• Fulvic is the best and highest-quality fulvic acid on the market, which we recommend for further increasing and improving the harvest, in addition to the main nutrient fertilisers.
• FlashClean optimises the health/condition of the substrate and mineral availability, even with an already good harvest.
• Ripen use on its own during the final 10 days to increase flowers.
• TrikoLogic provides beneficial micro-organisms in the root zone, TrikoLogic S adds increased protection and additional performance, especially at high temperatures.

BioRHIZOTONIC is a 100% organic stimulant for organic growing.

• BioRHIZOTONIC contains a range of vitamins, including B1 and B2
• It stimulates the development of root hairs and root tips and improves plant resilience
• A strong root system guarantees that the plant can absorb more nutrients and grow faster

BioRHIZOTONIC has a noticeable strengthening effect on plants. Thanks to BioRHIZOTONIC, plants develop longer roots through the subsoil layer. This is why BioRHIZOTONIC is, among other things, an ideal remedy for plants subjected to stress, such as cuttings during transplanting.
BioRHIZOTONIC also restores and strengthens plants that are ill or do not look well.

User instructions:

• Shake well before use
• Dissolve 20-40ml of concentrate in 10 litres of water (1:500-1:250)
• Use 1-6 times daily in the plant-growing medium and/or spray directly onto the leaves until the plant develops a healthy root system
• When transplanting, it is necessary to pre-treat the growing medium with this solution
• BIORHIZOTONIC produces better results at lower EC. If necessary, use BIORHIZOTONIC only during the first few days (without fertilisers)

Storage, health and safety instructions

• Excessive fertilisation has a negative effect on the substrate, the plant and nature as a whole!
• BIOCANNA BIORHIZOTONIC is 100% plant-based and is suitable for all growing media, such as soil, coco and hydroponic systems!
• Store in a tightly closed container in a dark, frost-proof place!
• Keep out of reach of children!

BioBizz Pre - Mix is an organic dry fertiliser.

• A blend of various organic ingredients
• For optimal growth and flowering
• Resistance to diseases and fungi

What is Pre - Mix?

• Do you want guaranteed optimal growth, flowering and maximum resistance to diseases and fungal problems? Pre - Mix combines the qualities of various organic fertilisers, trace elements and fungi — all in the right quantities in one convenient and flexible package.

How is it used?

• You can use Pre-Mix as a transplanting or starter fertilizer. Mix it into any soil or substrate, or combine it with high-quality organic worm castings to add microbial life and boost the nutrient value of your soil or planting mix.

GK Palm Tree Ashes is palm-tree ash from the Indonesian island of Sumatra. The ash contains a large amount of potassium, a small amount of phosphorus and magnesium. Used in combination with GK GUANOKALONG powder 1kg., it is an organic flowering booster.

• NPK:0-1-30

Application:

• Water with a solution of 50ml. per 5L. ONCE EVERY TWO WEEKS during flowering.
• Mix 100ml. per 15L. soil in the second week of flowering or sprinkle around the plant.

ATAMI Bloombastic, the all-in-one flowering additive, acts as a stimulator, hardener, flavour enhancer and an activator of various enzymatic processes.

1. Contains over 50% more phosphorus and potassium than other liquid flowering products on the market!
2. A high-quality cocktail of bio-minerals and bio-stimulants!
3. Increases the sugar content, weight and aroma!
4. An explosion in the production of sugar and flowers!

Suitable for:

• various types of vegetables, fruit and herbs
• flowering ornamental plants (e.g. orchids, violets)

Suitable for cultivation in:

• hydroponics
• coco substrate
• soil

Applications:

• during the last 4 - 6 weeks of flowering and ripening, in combination with the base nutrient programme
• suitable for all irrigation systems
• Do not combine with other flowering boosters (PK additives) high in phosphorus and potassium!

Dosage:

• 0.5 - 1 ml Bloombastic in 1 litre of water
• Please note that it drastically increases the EC level (electrical conductivity) of the nutrient solution!

NPK ratio:

• PK 14-15 W/W

GHE - T.A. - NovaMax Bloom (formerly FloraNova) is the most concentrated 1-component liquid flowering fertilizer on the market. Can be used for growing in hydroponics, coco coir or soil. Flora Nova Grow is a real breakthrough in fertilization technology, collecting all the necessary substances for your plants in just one bottle. With it, you won't need any extra supplements (like CalMag / PK / trace elements) to ensure healthy growth.

• the most concentrated 1-component flowering fertiliser on the market
• everything your plants need in just 1 bottle
• no supplements needed (CalMag / PK / Trace elements)
• very economical 
• works well with every plant type

How to use NovaMax Bloom:

• Shake well before each use and mix thoroughly with water!

For growing in soil:

• during the pre-flowering period: 8ml per 10L of water
• during the flowering period: 20ml per 10l of water

For growing in hydroponics and coco:

• during the pre-flowering period: 10ml per 10L of water
• during the flowering period: 25ml per 10l of water

You can use NovaMax Bloom with:

• Works for growing all plants and substrates – soil, hydroponics, coco, both indoors and outdoors.
• General Organics additives: The General Organics range includes high-quality organic additives for fine-tuning and improving your harvest.
• FlashClean optimises the health/condition of the substrate and mineral availability, even with an already good harvest.
• Ripen use on its own during the final 10 days to increase flowers.

BioBOOST is not a fertiliser, but a natural fermented plant extract with growth-stimulating properties that give the product a stronger aroma. BioBOOST is suitable for all plant-growing systems and can be applied in combination with BIOCANNA fertilisers and additives.

BioBOOST was developed by CANNA's research department from plant extracts sourced from tropical rainforests and is a true plant stimulant. Bioactive substances support additional metabolism, a process plants need most during flowering. Plants produce more fructose, become healthier and stronger, and are less vulnerable to disease and epidemics. As a result, higher yields are achieved with strong, juicy, healthy fruits. The number of bioactive substances in BioBOOST is enormous.

User instructions:

• Apply BIOBOOST together with regular feeding
• Shake well before use
• Dosage: Dilute approximately 1:500 (20ml in 10 L water) from the moment flowers start to form. For an additional flowering boost, dilute 1:250 (40ml in 10L water)
• Do not use in combination with products containing hydrogen peroxide (H₂0₂)
• Use the solution within 7 days
• BIOBOOST can be applied manually, by drip irrigation, or as a foliar feed

Storage, health and safety guidelines:

• BIOCANNA has specially developed BIOCANNA Bio Vega and Bio Flores for the plant growth and flowering stages!
• BIOBOOST is also ideal for use in combination with other (BIO)CANNA products!
• Store in a tightly closed container in a dark, frost-proof place!
• Keep out of reach of children!

GHE - T.A. - TriPart Grow (FloraGro) is part of the 3-component series of base nutrient fertilizers TriPart (the Flora series in the past) from the shared GHE and T.A. (Terra Aquatica) family.

• stimulates structural and vegetative growth
• builds healthy roots
• provides most of the nitrogen, potassium and secondary minerals in TriPart®
• use in larger amounts during the growth period and in smaller amounts during flowering

How to use TriPart®:

• Shake the bottles well before each use!
• Add each part separately, always stirring well afterwards!
• Always add the components in sequence: Micro - Grow - Bloom!!!
• If you use one measuring cup/jug, rinse it thoroughly before adding the next part and after use!
• If you water with hard/tap water (more than 70mg of calcium/1l), use GHE - T.A. - TriPart Micro Hard Water 1l. (FloraMicro H/W)
• If you use reverse osmosis, use GHE - T.A. - TriPart Micro Soft Water 1l. (FloraMicro S/W)

How to use TriPart Grow:

For growing in soil:

• when the first roots develop: 2ml per 10l of water
• when the first leaves appear: 6ml per 10l of water
• during the growth period: 15ml. per 10l. water
• during the pre-flowering period: 15ml per 10l of water
• during the flowering period: 7ml per 10l of water

For hydroponic and coco growing:

• when the first roots develop: 5ml per 10l of water
• when the first leaves appear: 10ml. per 10l. water
• during the growth period: 18ml per 10l of water
• during the pre-flowering period: 20ml per 10l of water
• during the flowering period: 8ml per 10l of water

Use TriPart® with:

• TriPart works for growing all plants in every substrate - soil, hydroponics and coco, both indoors and outdoors.
• Fulvic is the best and highest-quality fulvic acid on the market, which we recommend for further increasing and improving the harvest, in addition to the main nutrient fertilisers.
• FlashClean optimises the health/condition of the substrate and mineral availability, even with an already good harvest.
• Ripen use on its own during the final 10 days to increase flowers.
• TrikoLogic provides beneficial microorganisms in the root zone, TrikoLogic S adds enhanced protection and extra performance, especially at high temperatures.

Explode is our main bloom booster, giving plants in full bloom all the nutrients they need during this phase. This bloom enhancer, enriched with several micronutrients, vitamins and acids, provides explosive flower hardening. Explode also improves the photosynthetic process and increases your plant’s resistance to fungal and bacterial diseases. Its high-quality components are fully absorbed without leaving any residue.

• Total N-P-K: 0.2-0.2-4
• No additional PK 13/14 required
• Stimulates explosive flower hardening
• Improves strength and disease resistance
• Increases the amount of glucose produced
• Optimal uptake by the plant
• Suitable for any irrigation system

During the flowering period, the plant prepares to pollinate. It does this by producing flowers so that pollen can be transferred to fertilise the female plant.
This process requires a great deal of energy. It is therefore vital that plants receive enough energy to develop into fully flowering plants. Plants obtain their energy through a process called "Photosynthesis". In this process, the plant produces energy by using light energy, carbon dioxide from the air, water and nutrients from the soil. Only green leaves containing sufficient chlorophyll participate in photosynthesis and produce glucose. A nutrient deficiency during flowering, when leaves turn yellow and chlorophyll levels decrease, is disastrous for a plant and prevents good results.
Explode ensures the plant receives all nutrients needed for explosive flower hardening. It increases the plant’s resistance to fungal and bacterial diseases. Explode also stimulates the production of green pigment and chlorophyll content in the leaves. This improves photosynthesis. Chlorophyll converts water and nutrients into glucose. This means that light, carbon dioxide, water and nutrients are transformed into even more glucose, so your flowers and fruits gain explosive weight and flavour.

Dosage:

• 100ml per 100 litres of water (1:1000)

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 0.1% NO₃
• 0.1% NH₄
• 0.2% P₂O₅
• 3.7% K₂O
• 0.2% CaO
• 0.1% MgO
• 3.1% SO
• 0.1% Na₂O
• 0.1% CI
• 0.001% B
• 0.001% Cu
• 0.001% Fe
• 0.001% Mn
• 0.001% Mo
• 0.001 %Zn

Cactus & Succulent Focus by Growth Technology is a combined liquid fertiliser for cacti and succulent plants. Its specialised formula provides optimal growth, healthy and green stems, strong spines and vibrant flowers for your cacti and succulents.

• specially formulated for cacti and succulent plants
• contains all essential macro- and microelements
• contains organic plant extracts such as humic and fulvic acids

Regular use ensures healthy, strong plants with vibrant flowers.

How to use Cactus & Succulent Focus:

1. Shake well before use - this will ensure even distribution of nutrients!
2. Dosage – dilute 5ml Cactus and Succulent Focus in 1 litre of clean water and use this mixture to water the plants at every watering.

Water quality: Many areas have hard water with a high concentration of dissolved minerals. Over time, these salts can build up in the soil, making it harder for plants to absorb nutrients. Repotting the soil or flushing it with distilled water once a year is recommended to ensure optimal nutrient uptake.

Expert tip: Avoid overwatering your desert plants. Cacti and succulents should dry out between waterings and receive plenty of sunlight. Too much water can make plant tissue soft and susceptible to fungal attack.

GHE - T.A. - Pro Roots is a super-concentrated root stimulator that dramatically boosts growth and root development.

• larger, healthier root system
• better resistance to mould and fungi
• healthier, more vigorous plants

How to use Pro Roots:

Pro Roots is very powerful: for best results use it on cuttings, seeds and transplanted plants for 15 days, then switch to Fulvic to stimulate abundant fine-root growth.

• For adding to water or nutrient solution (in hydroponics, coco or soil): 2ml. per 10L. water

• If necessary, dilute for use as a foliar spray: 1ml. per 10L. water

Use Pro Roots with:

• all plants
• all substrates, hydroponics or outdoor growing

GK Complete Organics is a complete organic nutrient blend that you can use from the start of growth through to flowering. Guanokalong powder is mixed with the other GK-organic products such as Seaweed powder, Palm tree ashes, Vegetal fertilizer, Fish powder and Lava Worm. This unique product mix provides a pure, organic and complete NPK value with numerous microelements.

Mix GK Complete Orazganics 1L with 50L of soil from the very start of growing your plants.

Ferro ENZYM PLUS is a natural liquid enzyme product that contains 15 different enzymes. It also contains vitamins that stimulate root growth and improve nutrient and water uptake through the root system.

• quickly breaks down old roots
• prevents the development of pathogenic microorganisms in the growing medium
• stimulates root growth
• improves nutrient and water uptake

Instructions for use: Shake well before use! Adjust the desired pH and EC values in the nutrient solution after adding ENZYM PLUS.

Dosage:

• 4 ml per 10 L of water
• 40 ml per 100 L of water
• 400 ml per 1000 L of water

Not for consumption by humans or animals! Avoid contact with skin or eyes! Keep out of the reach of children or animals!

Additional product information is available on the manufacturer's website: here!

PLAGRON Sugar Royal is an additive used alongside the main nutrient programme; its use encourages and supports the natural processes occurring in plants during the flowering phase. Sugar Royal improves and enhances the natural aromatic and flavour qualities of the final product.

• improves and enhances the natural aroma and flavour
of flowers / fruit
• shortens the growing period (accelerates ripening)
• increases the final yield
• NPK: 9-0-0

Dosage and use:

• Shake well before use!
• Add a maximum of 1 ml of Sugar Royal to 1 L of water (1:1000).
• Apply from the 2nd week of growth at every watering!

PLAGRON Alga Grow is a 100% organic seaweed-based fertiliser for the growth phase of plants grown in soil. It provides rapid root development and balanced growth for healthy plants. Alga Grow can also be applied as a foliar feed.

• 100% organic and suitable for organic farming (CU certified)
• provides a stable pH value in the soil
• improves the structure of the soil
• rapid root development
• balanced growth
• healthy plants
• NPK: 4-2-4

Dosage and use:

• Shake well before use!
• Add up to 4ml. Alga Grow to 1l. of water (1:250).
• Apply with every watering during the growth phase!

T.A. pH+ is a professional pH regulator specially formulated to raise pH levels in irrigation water and hydroponic systems. Suitable for all plant types, this product provides the ideal environment for optimal nutrient uptake.

T.A. pH+ is a high-quality pH-up regulator developed to improve irrigation-water quality and the environment in hydroponic systems. With this product, you can easily achieve and maintain the optimum pH level for your type of plants, which is essential for efficient nutrient uptake and healthy growth. T.A. pH+ is made from plant-safe components and delivers reliable results without the risk of harmful effects. The product is ideal for a wide range of crops, including vegetables, fruit, flowers and ornamental plants, offering easy and convenient use for every grower.

Multi Total supports the key processes needed to convert organic material from dead plant matter into useful nutrients. It activates important root growth by improving soil structure in terms of water retention and stimulates nutrient-producing bacteria in the substrate. Multi Total also stimulates the cation exchange capacity (CEC) of minerals and micronutrients, increasing soil fertility and improving resistance to fungi and stressful conditions. The high-quality components are fully absorbed without residue.

• Total N-P-K: 0.2-0.1-0.1
• Improves soil structure
• Supports bacterial life
• Stimulates cation exchange capacity (CEC)
• Increases resistance to fungi and stress
• Optimal plant absorption

Water retention is essential for plant vitality and health. It provides a continuous water supply to plants between replenishment periods to sustain their growth and survival. The better the soil retains nutrients, the more nutrients are available to your plant so it can grow strong and healthy. Multi Total contains a variety of micronutrients that support this process. It also supports bacterial life, which converts organic matter into useful nutrients for your plants.
Rhizobia is one of these stimulated bacteria, living on plant roots and converting organic material into nitrogen, which is crucial for the plant to grow strong and, above all, remain healthy.
Multi Total also stimulates cation exchange capacity (CEC), where positively charged ions interact with soil. The higher the CEC, the more cations the soil can attract and the better its fertility will be. This enables your plants to absorb more nutrients from the soil, increasing their vigour and growth rate.

Dosage:

• 100ml per 100 litres of water

User instructions:

• Do not ingest!
• Keep out of reach of children!
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice!
• Wear protective clothing - the use of gloves is recommended!
• Shake well before use!

Ingredients / NPK:

• 0.1% NO₃
• 0.1% NH₄
• 0.1% P₂O₅
• 0.1% K₂O
• 0.1% CaO
• 0.1% MgO
• 0.1% SO
• 0.1% Na₂O
• 0.1% CI
• 0.001% B
• 0.001% Cu
• 0.001% Fe
• 0.001% Mn
• 0.001% Mo
• 0.001 %Zn

PLAGRON Terra Bloom is a primary fertiliser with a mineral base for flowering plants grown in soil. This highly concentrated liquid fertiliser provides optimal nutrition during the flowering phase and guarantees abundant flowering and fruit formation. Terra Bloom is suitable for all soil mixes and can be used together with all liquid fertilisers and additives.

• guarantees abundant flowering and fruit formation
• easily absorbed by plants
• suitable for all irrigation systems
• NPK ratio: 2-2-4

Dosage and use:

• Shake well before use!
• Add a maximum of 5 ml of Terra Bloom to 1 l of water. Apply with every watering during the flowering phase!

Growth Technology Formulex 300ml. is a high-performance single-component mineral fertiliser that contains a complete nutrient profile and is ideal for young plants. Formulex contains everything seedlings and cuttings need when they require their first fertilisation. Although Formulex is generally used for plants in their early stages of development, it can in fact be used throughout the vegetative phase of plants grown in both soil and hydroponic systems.

• contains all necessary macro- and microelements for optimal growth of young plants
• ideal for seedlings and cuttings / clones
• can also be used as a foliar fertiliser
• suitable for plants grown in soil and hydroponics

Benefits of FORMULEX:

1. Complete nutrient profile: Contains all necessary macro and microelements for optimal growth of young plants.
2. Versatile application: Can be used in soil, hydroponic systems and as a foliar fertiliser.
3. Stable pH: Does not require pH adjustment with most water types, making it easy to use.
4. Effective for early stages: Ideal for seedlings and cuttings, but can also be used during the vegetative phase.

Instructions for use:

• Rooting: Formulex is ideal for seedlings and cuttings / clones. Dilute 5 ml in 1 l. of water. Keep the soil / cubes (rock wool) moist.
• Growing in soil: Formulex is a superior liquid fertiliser for all plants grown in soil, especially potted plants. Dilute 5 ml in 1 l. of water. Use every week.
• Hydroponic growing (hydroponics): Following the recommended dilution below, Formulex can be used as a complete hydroponic nutrient solution. Dilute 10 ml in 1 l. of water. Shake or stir well.
• Foliar feeding: Formulex can be sprayed or misted onto plant leaves. It is ideal for use with cuttings / clones. Dilute 5 ml in 1 l. of water. Use every week.

General advice:

1. Shake well: Shake the bottle thoroughly before use to ensure an even distribution of nutrients!
2. Avoid light burn: Spray plants in low light or immediately after switching off the lighting, or at sunset, to avoid leaf burn!

Content % w/v:

• Total nitrogen (N): 1.98
• Nitrate nitrogen: 1.78
• Ammoniacal nitrogen: 0.20
• Readily soluble phosphorus (P₂O₅): 0.87 (0.38)
• Potassium (K₂O): 3.31 (2.75)
• Calcium (CaO): 1.40 (1.00)
• Chelated Copper EDTA (Cu): 0.002
• Chelated Iron EDTA (Fe): 0.040
• Chelated Manganese EDTA (Mn): 0.010
• Molybdenum (Mo): 0.001
• Chelated Zinc (Zn): 0.0025
• Also contains: Magnesium (Mg), Sulphur (S), Boron (B)