TechGrow T-1 Pro CO₂ Controller

This fully redesigned controller is as easy to use as the other TechGrow devices with which it is compatible. The TechGrow T-1 Pro CO₂ controller measures and controls the CO₂ level in a room. It automatically switches between day and night modes through the external sensor.

• Power supply: from 100 to 240V (automatic)
• Consumption: 3W (with sensor, without CO₂ source)
• CO₂ system setting range: 300 to 2000ppm
• CO₂ +/- setting range: 20 to 200ppm (we recommend 50ppm)
• (Hysteresis / frequency band)
• Measurement time: 1 measurement per second

Note: the sensor is sold separately!

Instructions for use here and here!

Our new Pro range features a hard, robust housing that is splash-resistant and fully controlled via the single Push & Turn button. The TechGrow Pro CO₂ T-1 controller also has min / max memory to show the minimum and maximum CO₂ value in a given area. The external CO₂ sensor is connected by UTP cable as standard, allowing you to take measurements anywhere in the area, ranging from 300-2000ppm or 300-10000ppm. With its new built-in dosing delay and timer, it offers the perfect solution for precise and accuracy-dependent dosing. The TechGrow Pro CO₂ T-1 controller also comes with a built-in dosing counter, allowing you to monitor CO₂ usage. The TechGrow Pro CO₂ T-1 controller now offers an easier way to make long-term progress and achieve overall improvement. Managing your growing environment will be better than ever!

Recommended sensor: TechGrow S-2 0/2000 ppm

Compatible sensors:

1. TechGrow S-2 0/2000 ppm
2. TechGrow S-4 0/2000 ppm
3. TechGrow S-2 0/10000 ppm
4. TechGrow S-4 0/10000 ppm

Features:

• can be set from 300 to 2000 ppm or from 300 to 10000 ppm
• adjustable dosing delay and timer
• automatic CO₂ dosing counter
• familiar interface
• built-in function for calibrating the CO₂ sensor against outdoor air
• the display shows CO₂, temperature and humidity values (depending on the connected sensor(s))
• the display shows the min / max values of the connected sensor(s)
• the display refreshes every second
• LED indicator for CO₂ dosing, light detection and stable climate
• all settings are retained during a power outage
• the controller automatically switches between day / night settings (via the connected sensor)
• sensor not included; available separately
• automatically turns off the display backlight after 60 seconds
• automatically detects a broken cable or poor connection of connected sensors
• compatible with multiple TechGrow devices
• option to connect to the Techgrow Datalogger (DL-1)