Products

Brimex insect spray is an environmentally friendly spray made from high-quality organic fatty acids and is 100% biodegradable. These fatty acids affect the resistance of harmful insects and provide effective pest control.

• Brimex is effective against: Fruit flies*, Thrips*, Aphids*, Ants* and more.
• harmless to people and the environment
• harmless to flora and groundwater

For optimal crop protection, use preventively. Does not cause damage to (young) crops.

How to use:

• For optimal results, spray the leaves from a distance of 30cm
• Can be used for both indoor and outdoor growing

Application:

• Ready-to-use spray

More about:

• Thrips here*
• Aphids here*

Note:

• The container is pressurised; do not expose it to direct sunlight or temperatures above 50° C!
• Do not puncture the container in any way during or after use!
• Keep away from sources of ignition!

Short description:

BubbleGen is a dual jet bubble generator with an integrated silencer that quietly and efficiently enriches and circulates the nutrient-solution reservoir with oxygen. It works without noisy compressor pumps and air stones, using atmospheric pressure to create an oxygen-rich jet of bubbles and nutrient solution.

Product features:

• Quiet and efficient oxygenation: Perfect for hydroponic reservoirs.
• No compressors needed: Eliminates the need for noisy air pumps.
• No air stones: Prevents clogging and the growth of bacteria and algae.
• Replaces circulation pumps: No additional nozzles or circulation pumps are needed.
• Vacuum operation: Avoids heating the solution.
• Flexible air supply: Can be powered from various sources (1.5 m hose included).
• Energy-saving: Reduces the cost of air and circulation pumps.
• Wide operating range: Works with pumps from less than 1000 LPH to over 4000 LPH.
• Easy installation: Three suction cups included for secure attachment to the bottom of the reservoir.

Advantages:

1. Eliminates the need for additional equipment: BubbleGen replaces air pumps, air stones and circulation pumps.
2. Quiet operation: Ideal for environments requiring minimal noise.
3. Energy efficiency: Significantly reduces energy costs.
4. Easy integration: Can be connected to a nutrient-solution chiller in existing systems.

Technical details:

• Material: Durable, corrosion-resistant housing.
• Installation: Accessories included for easy fitting.
• Compatibility: With pumps from 1000 to 4000 LPH.
• Length of included air hose: 1.5 m.

BubbleGen is an ideal solution for hydroponic systems, offering an innovative and efficient approach to oxygenation and circulation while reducing costs, noise and system complexity.

Cactus Focus Drip Feeders are pre-measured fertiliser doses for cacti and succulents, made in the United Kingdom. They provide a continuous supply of nutrients for healthy growth and flowering — forget frequent watering and feeding.

Detailed features

• Origin: Formulated and manufactured in the United Kingdom to a Growth Technology recipe, specifically for cacti and succulents.
• Dosage: 38 ml liquid fertiliser — one complete, ready-to-use dose
• Application: Simply cut off the cap and place the feeder back into the substrate – do not squeeze!
• Duration: One dose feeds plants for 3–4 weeks.
• Sufficient amount: For small pots (up to 13 cm), one dose is sufficient; for larger containers, more can be used.
• Easy to use: Quick and convenient to apply, ideal for busy gardeners or hobbyists.

Benefits

• Convenient, hassle-free feeding — no measuring or frequent fertilising required.
• Supports healthy growth and flowering of cacti and succulents.
• Long-lasting effectiveness — one dose feeds for up to one month.
• Made in the United Kingdom to an established standard and recipe.

Can Fan FT 200 Filterbox is a housing for 200 mm diameter bag filters, made of galvanised steel. It is designed for integration with fans and air ducts, providing efficient air filtration in various applications. The housing is designed for easy installation and maintenance, offering strength and durability. 

Detailed features

• Diameter: 200 mm
• Housing material: Galvanised steel
• Closure type: Lever mechanism for easy opening and closing
• Compatibility: Suitable for 200 mm bag filters
• Length: 500 mm
• Application: Industrial and commercial air ducts, ventilation systems.

Recommended use

Use Can Fan FT 200 Filterbox for integration into air ducts and ventilation systems where efficient air filtration is required. It is suitable for applications in industrial and commercial settings where high efficiency and reliability are needed.

Benefits

• Easy installation: Quick and convenient integration into existing systems
• Strength: Made of high-quality galvanised steel for durability
• Versatility: Compatible with various 200 mm diameter bag filters
• Low maintenance: Easy to clean and maintain

Can FilterBox ⌀ 150 is a high-quality air filter designed for use in ventilation systems. It is ideal for odour control and improving air quality in a variety of environments while maintaining optimal conditions for plant growth.

Can FilterBox ⌀ 200 is a high-quality air filter designed for use in ventilation systems. It is ideal for odour control and improving air quality in various environments, while maintaining optimal conditions for plant growth.

Can Inline 1000 is an in-line activated carbon filter for air purification. It can be used as a second filter, giving you double air filtration. Can Inline is the ideal solution when space is small and limited and there is no room for your filter – it can easily and conveniently be placed outside the working area.

• capacity: 1000m³/h
• flange: ⌀ 200mm
• steel housing
• activated carbon layer thickness: 5cm
• can be installed inside and outside the grow room
• intake or exhaust air - 100% filtration in both directions
• minimum 18-month lifespan*

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. It is not intended for filtering dust, fine particulate matter or smoke! It is recommended to install a dust filter in front of it. Activated carbon bed thickness: 5cm.

Full technical specifications:

• capacity: 1000m³/h
• steel housing
• flange: ⌀ 200mm
• length: 77.5cm
• diameter: 36.5cm
• weight: 17kg
• activated carbon quantity: 5.1kg
• activated carbon layer thickness: 5cm
• activated carbon type: Lite
• minimum 18-month lifespan*

*When used in a working environment with below 70% relative humidity and temperature up to 80°C!

Can Inline 1500 is an inline activated carbon filter for air purification. It can be used as a second filter, providing you with double air filtration! Can Inline is the ideal solution when space is small and limited, leaving no room for your filter - it can be easily and conveniently installed outside the grow room.

• capacity: 1500m³/h
• flange: ⌀ 250mm
• steel housing
• activated carbon layer thickness: 5cm
• can be installed inside and outside the grow room
• intake or exhaust air - 100% filtration in both directions
• minimum 18-month lifespan*

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. It is not intended for filtering dust, fine particulate matter or smoke! It is recommended to install a dust filter in front of it. Activated carbon bed thickness: 5cm.

Full technical specifications:

• capacity: 1500m3/h
• steel housing
• flange: ⌀ 250mm
• length: 102.5cm
• diameter: 36.5cm
• weight: 24kg
• amount of activated carbon: 7.6kg
• activated carbon layer thickness: 5cm
• activated carbon type: Lite
• minimum 18-month lifespan*

*When used in an environment with relative humidity below 70% and temperatures up to 80°C!

Can Inline 2500 is an in-line activated-carbon filter for air purification. It can be used as a second filter, providing you with double air filtration. Can Inline is the ideal solution where space is small and limited, with no room for your filter - it can be placed easily and conveniently outside the grow room.

• capacity: 2500m³/h
• flange: ⌀ 250mm
• steel housing
• activated carbon layer thickness: 5cm
• can be installed inside and outside the grow room
• intake or exhaust air - 100% filtration in both directions
• minimum 18-month lifespan*

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. It is not intended for filtering dust, fine particulate matter or smoke! It is recommended to install a dust filter in front of it. Activated carbon bed thickness: 5cm.

Full technical specifications:

• capacity: 2500m³/h
• steel housing
• flange: ⌀ 250mm
• length: 126.5 cm
• diameter: 41.5cm
• weight: 34.5kg
• amount of activated carbon: 12.2kg
• activated carbon layer thickness: 5cm
• activated carbon type: Lite
• minimum 18-month lifespan*

*For use in a working environment with relative humidity below 70% and temperatures up to 80°C!

Can Inline 300 ⌀ 100mm is an inline activated-carbon filter for air purification. It can be used as a secondary filter, giving you double air filtration. Can Inline is the ideal solution where space is limited and there is no room for your filter: it can be conveniently installed outside the grow room.

• capacity: 300 m³/h
• flange: ⌀ 100mm
• steel housing
• activated carbon layer thickness: 2.5 cm
• can be installed inside and outside the grow room
• intake or exhaust air - 100% filtration in both directions
• minimum 18-month service life*

Absorbs odorous and/or hazardous gases such as ammonia, formaldehyde and volatile organic compounds (VOC). Catalytically breaks down ozone. Not intended for filtering dust, fine dust particles or smoke! A dust filter is recommended upstream. Activated-carbon bed thickness: 2.5cm.

Full technical specifications:

• capacity: 300 m³/h
• steel housing
• flange: ⌀ 100mm
• length: 72cm
• diameter: 30cm
• weight: 7kg
• amount of activated carbon: 1.2 kg
• activated-carbon bed thickness: 2.5cm
• type of activated carbon: Lite
• minimum 18-month service life*

*For use in a working environment with under 70% relative humidity and temperatures up to 80°C!

Can Inline 300 is an inline activated carbon filter for air purification. It can be used as a second filter, providing you with double air filtration. Can Inline is the ideal solution when space is small and limited and there is no room for your filter – it can be easily and conveniently placed outside the working area.

• capacity: 300 m³/h
• flange: ⌀ 125mm
• steel housing
• activated carbon layer thickness: 2.5 cm
• can be installed inside and outside the grow room
• intake or exhaust air - 100% filtration in both directions
• minimum 18-month lifespan*

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically breaks down ozone. It is not intended for filtering dust, fine dust particles or smoke! A dust filter is recommended to be installed before it. Activated carbon layer thickness: 2.5cm

Full technical specifications:

• capacity: 300 m³/h
• steel housing
• flange: ⌀ 125mm
• length: 72cm
• diameter: 30cm
• weight: 7kg
• amount of activated carbon: 1.2 kg
• activated carbon layer thickness: 2.5cm
• type of activated carbon: Lite
• minimum 18-month service life*

*For use in a working environment with under 70% relative humidity and temperatures up to 80°C!

Can Inline 3000 is an inline activated-carbon filter for air purification. It can be used as a secondary filter, providing double air filtration. Can Inline is the ideal solution when space is small and limited, with no room for your filter — it can be placed easily and conveniently outside the grow room.

• capacity: 3000 m³/h
• flange: ⌀ 315mm
• steel housing
• activated carbon layer thickness: 5cm
• can be installed inside and outside the grow room
• intake or exhaust air - 100% filtration in both directions
• minimum 18-month lifespan*

Absorbs odorous and/or hazardous gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically decomposes ozone. It is not intended for filtering dust, fine particulate matter or smoke! It is recommended to install a dust filter in front of it. Activated carbon bed thickness: 5cm.

Full technical specifications:

• capacity: 3000 m³/h
• steel housing
• flange: ⌀ 315mm
• length: 126.5 cm
• diameter: 46.5 cm
• weight: 40.5 kg
• activated carbon quantity: 14.3 kg
• activated carbon layer thickness: 5cm
• activated carbon type: Lite
• minimum 18-month lifespan*

*When used in an environment with relative humidity below 70% and temperatures up to 80°C!

Can Inline 600 is an inline filter with activated carbon for air purification. It can be used as a second filter, providing double air filtration. Can Inline is the ideal solution for situations where space is limited and there is no room for your filter — it can be conveniently placed outside the grow room.

• capacity: 600m³/h
• flange: ⌀ 150mm
• steel housing
• activated carbon layer thickness: 5cm
• can be placed inside and outside the grow room
• inlet or outlet air — 100% filtration in both directions
• minimum 18-month service life*

Absorbs odorous and/or hazardous gases — ammonia, formaldehyde, volatile organic compounds (VOC), etc. Catalytically breaks down ozone. Not intended for filtering dust, fine particulate matter or smoke! It is recommended to install a dust filter before it. Activated-carbon bed thickness: 5cm

Full technical specifications:

• capacity: 600m³/h
• steel housing
• flange: ⌀ 150mm
• length: 60.5cm
• diameter: 31.5cm
• weight: 10kg
• amount of activated carbon: 2.2kg
• activated carbon layer thickness: 5cm
• type of activated carbon: Lite
• minimum 18-month service life*

*When used in an operating environment with relative humidity below 70% and temperatures up to 80°C!

CAN ISO-MAX 250/1480 is a powerful high-end inline fan. What makes this model unique is that it is a fan built into a silencer. Its metal housing is wrapped in special sound-insulating material, providing high performance and low noise levels. The fan is equipped with a Swiss motor, thermal protection against overheating, speed control and hangers for easier installation.

• metal, sound-insulated housing
• option for speed control
• capacity: 1480 m³/h
• flange: ⌀ 250 mm
• power: 150W
• current: 0.9A
• length: 680 mm
• weight: 9.9 kg

Note: the fan is supplied without a plug!

Full technical specifications: here*

• CAN-MAX fan integrated into a silencer
• quiet and powerful
• easy to install
• metal housing
• special sound-insulating material
• Swiss motor
• thermal protection
• speed control capability
• ​Supplied without a plug!

CAN ISO-MAX 250/2310 is a powerful high-end inline fan. What makes this model unique is that it is a fan integrated into a silencer. Its metal housing is wrapped in a special sound-insulating material, providing high performance and low noise levels. The fan is equipped with a Swiss motor, thermal protection against overheating, speed control and hangers for easier installation.

• sound-insulated metal housing
• option for speed control
• capacity: 2310m³/h
• flange: ⌀ 250mm
• power: 273W
• current: 1.7A
• length: 680 mm
• weight: 13.4kg

Note: the fan is supplied without a plug!

Full technical specifications: here*

• CAN-MAX fan integrated into a silencer
• quiet and powerful
• easy to install
• metal housing
• special sound-insulating material
• Swiss motor
• thermal protection
• speed control capability
• ​Supplied without a plug!