SYLVANIA

Sylvania GroLux 600W – HPS lamp

Sylvania GroLux SHP-TS 600W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• amperage: 5.5A
• luminous flux:90,000 lm, 200,000 Phyto-lm
• efficiency: 150 lm/W
• color temperature: 2050 K
• lifespan: 26,000 h
• socket: E40

Detailed specifications:here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Keep at least 60 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To get the most out of sodium lamps, it is recommended not to use them for more than one year.

Caution:

• Electric shock hazard - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and an appropriate device!
• Damaged lamps may emit hazardous radiation and cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp turning on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

Sylvania GroLux 400W – HPS lamp

Sylvania GroLux SHP-TS 400W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 400W
• luminous flux: 58,000 lm, 128,000 Phyto-lm
• efficiency: 145 lm/W
• color temperature: 2050 K
• life: 26,000 hours
• socket: E40

Note:to ignite the lamp, it must be connected to a choke and ignitor or electronic ballastrequired, which are sold separately (you can purchase them from here*).

Detailed specifications:here*

Recommendations:

• Connect to the mains via a suitable ballast.
• Position at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To achieve maximum efficiency from sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable fixture!
• Damaged lamps can emit dangerous radiation and may cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental legislation!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps should be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp turning on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

Sylvania GroLux 250W – HPS lamp

Sylvania GroLux SHP-TS 250W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering stage.

• for growth and flowering
• Power: 250W
• Amperage: 2.6A
• Luminous flux: 34,000 lm, 75,500 Phyto-lm
• Efficiency: 136 lm/W
• Color temperature: 2050 K
• Lifespan: 26,000 h
• Socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (you can purchase them here*).

Detailed specifications:here*

Recommendations:

• Connects to the mains through a suitable ballast.
• Position at least 40 cm from the plant tops!
• Recommended ambient temperature: 25°C
• To get the maximum performance from sodium lamps, it is recommended that they be used for no more than one year.

Caution:

• Risk of electric shock - disconnect the power before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable fixture!
• Damaged lamps may emit hazardous radiation and can cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp’s life - characterized by the lamp switching on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!