Water Chillers and Coolers

Maintaining the nutrient solution temperature in hydroponic systems (NFT and DWC) within optimal limits is essential for preserving oxygen levels and maintaining suitable conditions in the root zone.

With the Hailea HC-250A Chiller 600 - 2200 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• refrigerant R134a
• low noise levels
• easy-to-use digital controller
• automatic overheating shutoff function
• for a tank / aquarium with a capacity of: 250 L

The chiller is designed to work with a water pump with a flow rate of 600 to 2200 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-250A
• recommended flow rate: 600 - 2200 L/h
• for a tank / aquarium with a capacity of: 250 L
• fittings: 2x ⌀ 25 mm (included)
• power: 1/6 HP
• power consumption: 300 W
• current: 220-240V, 50Hz
• amperage: 1.3A
• dimensions: 448 x 330 x 440 mm
• weight: 18 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Clean according to the unit’s instructions. Make sure to place an air circulation fan near the chiller to prevent heat buildup.

Please note:

1. The flow rate is determined by the pump’s maximum output (submersible pump or other external supply filter) and the circulation equipment.
2. The cooling performance test is shown at an ambient temperature of 30°C, a water temperature before cooling of 28°C, a set temperature of 16°C, and a maximum of 250 liters of water to be cooled. As the amount of water being cooled decreases, the water temperature will drop.
3. Cooling efficiency depends on the installation location, heat source, lighting, pump filter, and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use other alternatives to avoid affecting the unit’s performance.
4. When a room does not have enough air exchange, cooling efficiency decreases if the ambient temperature rises due to heat from the unit.

Cooling sizing

The specified flow rate in L/h is for circulation through the unit. Cooling also depends on the volume, ambient temperature, and heat load. Ensure unobstructed ventilation and a compatible water pump.

Browse water chillers.

Maintaining a constant nutrient solution temperature within optimal limits in hydroponic systems (NFT and DWC) is extremely important for preserving oxygen levels and maintaining suitable conditions in the root zone.

With the Hailea HC-2200BH Chiller 1500 - 4000 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• refrigerant R134a
• low noise levels
• easy-to-use digital controller
• automatic overheat shutoff function
• for a tank / aquarium with a capacity of: 2000 L 
• The chiller is designed to work with a water pump with a flow rate of 1500 to 4000 L/h (sold separately).

Instruction video: here.*

Specifications:

• model: HC-2200BH
• recommended flow rate: 1500 - 4000 l/h
• for a tank / aquarium with a capacity of: 2000 l
• fittings: 4x ⌀ 25 mm (included)
• power: 2 HP
• power consumption: 1610 W
• current: 220-240V, 50Hz
• amperage: 7A
• dimensions: 634 x 468 x 590 mm
• weight: 47 kg
• warranty: 1 year

Recommendations: The cooler should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Clean according to the unit's instructions. Be sure to also install an air circulation fan near the chiller to prevent heat buildup.

Please note:

1. The flow rate depends on the pump's maximum flow (submersible pump or other external power filter) and circulation equipment.
2. The cooling performance test is shown with an ambient temperature of 30°C, a water temperature before cooling of 28°C, a set temperature of 16°C and no more than 2000 liters of chilled water. As water cooling decreases, the water temperature will drop.
3. Cooling efficiency depends on the installation location, heat source, lighting, pump filter and other connected parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use other alternatives to avoid affecting the unit's performance.
4. When a room does not have sufficient air exchange, cooling efficiency decreases if the ambient temperature rises due to heat from the unit.

Cooling capacity

The specified flow rate in l/h is for circulation through the unit. Cooling also depends on volume, ambient temperature and heat load. Ensure free ventilation and use a compatible water pump.

Browse water chillers.

Tecoponic HY2000 Chiller – Water Chiller for Hydroponic Systems

Brief Description:

•  Precision Cooling: Maintains the ideal nutrient solution temperature (5°-35°C).
•  Energy Efficiency: High-quality compressors and a titanium heat exchanger for low energy consumption.
• Convenient Design: Compact and suitable for aquariums and systems up to 2000 liters.

Detailed Description:

Tecoponic HY2000 Chiller is a high-quality water chiller designed for hydroponic systems and aquariums up to 2000 liters. Thanks to its advanced technology, it maintains the optimal nutrient solution temperature needed for healthy plant growth.

Key Features:

• Cooling Technology: Eco-friendly R134a refrigerant and a titanium heat exchanger for high performance and energy efficiency.
• Digital Thermostat: Precise temperature readings with settings ranging from 5°-35°C and a resolution of 0.1°C.
• Efficient Design: Compact, rust-resistant housing, easy maintenance with a magnetic air filter.
• Unique Feature: Built-in heater for continuously maintaining the temperature in all conditions.

Technical Specifications:

• Power supply: 230V-50Hz
• Power consumption: 440W
• Flow rate: 600 l/h - 800 l/h
• Dimensions: 31 х 31 х 51 cm
• Weight: 21.4 kg
• Connections: 3/4" fitting

Cooling Capacity Sizing

The stated flow rate in l/h refers to circulation through the unit. Cooling also depends on the volume, ambient temperature, and heat load. Ensure adequate ventilation and use a compatible water pump.

Browse water chillers.

Maintaining a constant nutrient solution temperature within optimal ranges in hydroponic systems (NFT and DWC) is extremely important for preserving oxygen levels and protecting the roots from pythium* and other diseases.

With the Hailea HC-150A chiller, 250 - 1200 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
•  R134a refrigerant
• low noise levels
• easy-to-use digital controller
• automatic overheat protection shut-off function
• for tank / aquarium with a volume of: 150 L

The chiller is designed to operate with a water pump with a flow rate of 1000 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-150A
• recommended flow rate: 250 - 1200 L/h
• for tank / aquarium with a volume of: 150 L
• fittings: ⌀ 12 or ⌀ 17 mm (included)
• power: 1/10 HP 
• power consumption: 170 W
• current: 220-240V, 50Hz
• amperage: 1.1A
• dimensions: 420 x 248 x 365 mm
• weight: 15.0 kg
• warranty: 1 year

Recommendations: The cooler should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Clean according to the appliance instructions. Be sure to also place an air circulation fan near the chiller to prevent heat buildup.

Please note:

1. The flow rate is determined by the pump's maximum output (submersible pump or other external power filter) and the circulation equipment.
2. The cooling performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C, and the volume of water being cooled is no more than 150 liters. As the water cooling capacity decreases, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter, and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use other alternatives to avoid affecting the unit's performance.
4. When a room does not have sufficient air exchange, cooling efficiency decreases if the ambient temperature rises due to heat from the unit.

Cooling capacity sizing

The stated flow rate in L/h refers to circulation through the unit. Cooling also depends on volume, ambient temperature, and heat load. Ensure adequate ventilation and use a compatible water pump.

Browse water chillers.

Maintaining a consistent nutrient solution temperature within the optimal range in hydroponic systems (NFT and DWC) is extremely important for preserving oxygen levels and maintaining suitable conditions in the root zone.

With the Hailea HC-100A Chiller 1500 - 4000 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• refrigerant R134a
• low noise levels
• easy-to-use digital controller
• automatic overheating shut-off function
• for tanks / aquariums with a capacity of: 1,000 L

The chiller is designed to work with a water pump with a flow rate of up to 4000 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-1000A
• recommended flow rate: 1500 - 4000 L/h
• for tanks / aquariums with a capacity of: 1,000 L
• fittings: included
• power: 1 HP
• power consumption: 780 W
• current: 220-240V, 50Hz
• amperage: 3.2 A
• dimensions: 520 x 400 x 480 mm
• weight: 31.3 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Clean it according to the appliance instructions. Be sure to place an air circulation fan near the chiller to prevent heat buildup.

Please note:

1. The flow rate is determined by the pump's maximum output (submersible pump or other external feed filter) and the circulation equipment.
2. The cooling performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C, and the volume of cooled water is no more than 1,000 liters. As the water cooling capacity decreases, the water temperature will drop.
3. Cooling efficiency depends on the installation location, heat source, lighting, pump filter, and other connected components. Use special pumps and other accessories sold with Hailea series chillers. Do not use other alternatives, to avoid affecting the unit’s performance.
4. When a room does not have sufficient air exchange, cooling efficiency decreases if the ambient temperature rises due to heat from the unit.

Cooling system sizing

The stated flow rate in L/h refers to circulation through the unit. Cooling also depends on volume, ambient temperature, and heat load. Ensure adequate ventilation and use a compatible water pump.

Browse water chillers.

Maintaining a constant nutrient solution temperature in hydroponic systems (NFT and DWC) within optimal limits is extremely important for preserving oxygen levels and maintaining suitable conditions in the root zone.

With the Hailea HC-100A Chiller 200 - 1000 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• refrigerant R134a
• low noise levels
• easy-to-use digital controller
• automatic overheating shut-off function
• for tank / aquarium with a capacity of: 100 L

The chiller is designed to work with a water pump with a flow rate of 1000 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-100A
• recommended flow rate: 200 - 1000 L/h
• for tank / aquarium with a capacity of: 100 L
• fittings: ⌀ 13 mm (included)
• power: 1/20 HP 
• power consumption: 130 W
• current: 220-240V, 50Hz
• amperage: 0.6A
• dimensions: 338 x 218 x 325 mm
• weight: 9.2 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Clean according to the appliance instructions. Be sure to place an air circulation fan near the chiller to avoid heat buildup.

Please note:

1. The flow rate is determined by the pump’s maximum flow (submersible pump or other external power filter) and the circulation equipment.
2. The cooling performance test is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the cooled water is no more than 100 liters. As the water cooling capacity decreases, the water temperature will drop.
3. Cooling efficiency depends on the installation location, heat source, lighting, pump filter, and other connecting components. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives, to avoid affecting the unit's performance.
4. When a room does not have sufficient air exchange, cooling efficiency decreases if the ambient temperature rises due to heat from the unit.

Cooling capacity sizing

The stated flow rate in L/h refers to circulation through the unit. Cooling also depends on volume, ambient temperature, and heat load. Ensure unobstructed ventilation and a compatible water pump.

Browse water chillers.

Maintaining a constant nutrient solution temperature within optimal limits in hydroponic systems (NFT and DWC) is extremely important for preserving oxygen levels and maintaining suitable conditions in the root zone.

With the Hailea HC-130A 200 - 1000 L/h chiller, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with freshwater and saltwater
• refrigerant R134a
• low noise levels
• easy-to-use digital controller
• feature with automatic overheating shutoff
• for tanks/aquariums with a volume of: 130 L

The chiller is designed to operate with a water pump with a flow rate of 1000 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-130A
• recommended flow rate: 200 - 1000 L/h
• for a tank / aquarium with a volume of: 130 L
• fittings: ⌀ 12 or ⌀ 17 mm (included)
• power: 1/15 HP 
• power consumption: 130 W
• current: 220-240V, 50Hz
• amperage: 0.8A
• dimensions: 338 x 218 x 325 mm
• weight: 9.5 kg
• warranty: 1 year

Recommendations: The cooler should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Clean according to the unit's instructions. Make sure to install an air circulation fan near the chiller to prevent heat buildup.

Please note:

1. The flow rate is determined by the pump's maximum flow (submersible pump or other external power filter) and the circulation equipment.
2. The cooling performance test is shown for an ambient temperature of 30°C, a water temperature before cooling of 28°C, a set temperature of 16°C, and no more than 130 liters of cooled water. As the water cooling capacity decreases, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter, and other connecting components. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use other alternatives, to avoid affecting the unit's performance.
4. When a room does not have sufficient air exchange, cooling efficiency decreases if the ambient temperature rises due to heat from the unit.

Cooling capacity sizing

The specified flow rate in L/h is for circulation through the unit. Cooling also depends on the volume, ambient temperature, and heat load. Ensure adequate ventilation and use a compatible water pump.

Browse water chillers.