Milwaukee

Milwaukee pH 7.01 buffer solution for calibrating a compatible pH meter.

Features and intended use

• Nominal value: pH 7.01.
• Package size: 20 ml.
• Intended use: checking and calibrating pH, according to the meter’s procedure.

Use and compatibility

Pour a fresh portion into a clean container and wait for a stable reading. Follow the temperature chart on the label, where applicable. Do not pour the used portion back into the bottle. The buffer is not a product for adjusting the pH of a reservoir.

Browse pH buffers and solutions.

Milwaukee pH 4.01 buffer solution for calibrating a compatible pH meter.

Features and intended use

• Nominal value: pH 4.01.
• Package: 20 ml.
• Purpose: checking and calibrating pH according to the meter's procedure.

Use and compatibility

Pour a fresh portion into a clean container and wait for a stable reading. Follow the temperature table on the label, where applicable. Do not return used solution to the bottle. The buffer is not intended for adjusting the pH of a reservoir.

Browse pH buffers and solutions.

Milwaukee electrical conductivity standard, 1413 µS/cm, for compatible EC meters.

Features and intended use

• Nominal EC value: 1413 µS/cm.
• Package size: 20 ml.
• Used for testing or calibration when the specific meter supports this standard value.

Operation and compatibility

Follow the manual for the selected model. Some EC meters are factory-calibrated, and the standard is used for testing after cleaning. Use a fresh portion without contaminating the remaining solution.

Browse EC standards and solutions.

Milwaukee MA9015 is a storage solution for compatible pH electrodes.

Features and intended use

• Package: 230 ml.
• Purpose: to keep the pH glass membrane and reference junction hydrated.

Use and compatibility

After measuring, rinse the electrode and add the prescribed amount of solution to the protective cap. Do not use distilled, deionized, or reverse osmosis water for long-term storage of a pH electrode. Refilling inside the electrode is permitted only with a refillable probe and an expressly compatible electrolyte.

Browse electrode maintenance solutions.

Milwaukee PH600 is a compact digital tester for the pH of liquid samples.

Features and intended use

• pH range: 0.0 to 14.0.
• Resolution: 0.1 pH.
• Accuracy: ±0.1 pH.
• Manual one-point calibration.

Operation and compatibility

Calibrate using the specified buffer, wait for a stable reading, and store the probe in a suitable solution. Decimal places in a description do not increase the display resolution.

Warranty under the store offer

• device warranty: 1 year
• sensor warranty: 6 months

Browse pH meters.

Milwaukee pH 10.01 buffer solution for calibrating a compatible pH meter.

Features and intended use

• Nominal value: pH 10.01.
• Package size: 20 ml.
• Intended use: pH testing and calibration according to the meter's procedure.

Operation and compatibility

Pour a fresh portion into a clean container and wait for a stable reading. Follow the temperature chart on the label where applicable. Do not return the used portion to the bottle. The buffer is not a product for adjusting the pH of the reservoir.

Browse pH buffers and solutions.

Milwaukee Electrode Rinse Solution is a solution for rinsing an electrode between samples or calibration solutions.

Features and purpose

• Sachet: 20 ml.
• Purpose: rinsing and limiting the transfer of contaminants.

Use and compatibility

The rinse solution serves a different purpose from the cleaning concentrate and storage solution. Follow the maintenance procedure for the specific electrode.

Browse measuring probe supplies.

Milwaukee electrical conductivity standard, 12 880 µS/cm, for compatible EC meters.

Features and intended use

• Nominal EC value: 12 880 µS/cm.
• Package size: 20 ml.
• Used for testing or calibration when the specific meter supports this standard value.

Operation and compatibility

Follow the manual for the selected model. Some EC meters are factory-calibrated, and the standard is used for testing after cleaning. Use a fresh portion without contaminating the remaining solution.

Browse EC standards and solutions.

Milwaukee MA9016 is a specialized cleaning solution for compatible pH electrodes.

Features and intended use

• Volume: 230 ml.
• Removes contaminants that may slow the response or make calibration difficult.

Use and compatibility

Follow the treatment time specified in the electrode manual and on the solution label. After cleaning, rinse, hydrate if necessary, and calibrate. Do not use the cleaning solution as a permanent storage solution.

Browse cleaning and maintenance solutions.

Milwaukee CD611 measures the electrical conductivity of liquids.

Features and intended use

• Range: 0 to 19,900 µS/cm.
• Resolution: 100 µS/cm.
• Manual single-point EC calibration.
• Manufacturer-recommended standard: 12,880 µS/cm.

Use and compatibility

EC is measured directly. Conversion to TDS/ppm requires a selected factor and is not a separate measurement of each nutrient. Temperature compensation does not mean a separate temperature reading is provided.

Browse EC meters.

For CD611: Milwaukee, 12,880 µS/cm EC standard, 20 ml sachet.

Milwaukee pH51 is a pH tester with a replaceable MA73600 electrode.

Features and purpose

• Range: pH 0.0 to 14.0.
• Resolution: 0.1 pH.
• Accuracy: ±0.1 pH.
• Manual two-point calibration.

Use and compatibility

Prepare the probe and calibrate it according to the manual. Keep the pH electrode hydrated with a suitable solution.

Warranty under the store offer

• meter warranty: 1 year
• probe warranty: 6 months

Browse pH meters.

Milwaukee pH55 measures pH and temperature with automatic temperature compensation.

Features and intended use

• pH range: −2.0 to 16.0.
• pH accuracy: ±0.1.
• Automatic one- or two-point calibration.
• Replaceable MI56P electrode.

Operation and compatibility

Allow the sample to reach temperature equilibrium and wait for a stable reading. Replace the electrode with the specified model.

Browse pH meters.

Milwaukee EC60 measures electrical conductivity, calculated TDS and temperature.

Features and intended use

• EC range: 0 to 20 mS/cm.
• TDS range: 0 to 10 ppt.
• Temperature range: 0 to 60°C.
• Automatic one-point EC calibration.

Operation and compatibility

TDS is derived from EC using a conversion factor. Check the settings and specified EC standard for the EC60 before comparing readings with another device.

Warranty under the store offer

• Manufacturer's warranty - 2 years for the device, 6 months for the sensor. Does not cover mechanical damage or improper use!

Browse EC meters.

Milwaukee C66 is an EC tester with a replaceable electrode.

Features and purpose

• EC range: 0.00 to 10.00 mS/cm.
• Resolution: 0.01 mS/cm.
• Accuracy: ±2% of full scale.
• Manual one-point calibration.

Operation and compatibility

Follow the instructions for preparation, standard, and temperature equilibration. Check the electrode's cleanliness if readings are unstable or low.

Warranty under the store offer

• meter warranty: 1 year
• electrode warranty: 6 months

Browse EC meters.

Milwaukee Pocket MI6000 is a set of separate pH and EC testers.

Features and intended use

• PH600 pH tester.
• CD611 EC tester.

Operation and compatibility

Calibrate each meter with its prescribed standard. The two meters have different probes, measurement principles and storage requirements.

Browse pH and EC kits.

For the CD611: Milwaukee, EC standard 12 880 µS/cm, 20 ml sachet.

Milwaukee pH 7.01 buffer solution for calibrating a compatible pH meter.

Features and intended use

• Nominal value: pH 7.01.
• Package size: 230 ml.
• Intended use: pH checking and calibration, according to the meter's procedure.

Use and compatibility

Pour a fresh portion into a clean container and wait for a stable reading. Follow the temperature chart on the label where applicable. Do not return the used portion to the bottle. The buffer is not a product for adjusting the pH of a reservoir.

Browse pH buffers and solutions.

Milwaukee pH 4.01 buffer solution for calibrating a compatible pH meter.

Features and intended use

• Nominal value: pH 4.01.
• Package size: 230 ml.
• Intended use: checking and calibrating pH according to the meter’s procedure.

Use and compatibility

Pour a fresh portion into a clean container and wait for a stable reading. Follow the temperature chart on the label when applicable. Do not pour the used portion back into the bottle. The buffer is not a product for adjusting the pH of a reservoir.

Browse pH buffers and solutions.

The Milwaukee Pocket Tester Kit combines the pH51 with a separate EC tester.

Features and intended use

• pH measurement with the pH51.
• Separate electrical conductivity tester.

Use and compatibility

Confirm the exact EC tester model and included calibration supplies before ordering. The pH51 and EC tester use different calibration procedures.

Browse pH and EC kits.

Milwaukee MC110 PRO is a benchtop pH monitor with an alarm when the reading deviates from the set value.

Features and intended use

• Range: pH 0.0 to 14.0.
• Resolution: 0.1 pH; accuracy: ±0.2 pH.
• Alarm setpoint: pH 3.5 to 7.5.
• Manual two-point calibration.

Operation and compatibility

The MC110 displays the reading and sounds an alarm. It does not have the dosing function of the MC122.

Browse monitors and controllers.

Milwaukee MC122 PRO monitors pH and switches a compatible device according to the set value.

Features and intended use

• pH controller with manual two-point calibration.
• Compatible with the Milwaukee MP810 dosing pump.
• The MP810 is not included in this separate offer for the MC122.

Operation and compatibility

Automatic addition of pH adjuster requires a pump, a suitable reagent and a properly selected setup. Choose the MC720 kit when you need an offer that includes the MC122 and MP810.

Warranty under the store offer

• device warranty: 2 years
• pH probe warranty: 6 months

Browse pH and EC meters and controllers.

Dosing pump: Milwaukee MP810, dosing pump, 1.5 L/h, 25 mL/min. Complete kit: Milwaukee MC720 PRO, MC122 and MP810 dosing pump kit.

Milwaukee MC811 MAX is a monitor for continuous display of pH, EC, and temperature.

Features and intended use

• pH: 0.0 to 12.0; resolution 0.1; accuracy ±0.2 pH.
• EC: 0.00 to 5.00 mS/cm; resolution 0.01; accuracy ±2% of full scale.
• Temperature: −10 to 60°C.
• Calibration: manual pH calibration at two points, manual EC calibration at one point.

Use and compatibility

The MC811 is a monitor and does not automatically dose fertilizer or pH adjuster. The TDS functions of the MC810 model should not be attributed to the MC811.

Warranty under the store offer

• Meter warranty: 2 years
• pH probe warranty: 6 months

Browse monitors and controllers.

Milwaukee Pocket Tester Kit combines the pH55 and EC60.

Features and intended use

• pH55 for pH and temperature.
• EC60 for EC, TDS, and temperature.

Operation and compatibility

Check the contents of the specific kit and prepare both meters according to their separate instructions. The TDS scale is derived from EC using a coefficient.

Browse pH and EC meter kits.

Milwaukee MW802 PRO measures pH, EC, and calculated TDS with a combination probe.

Features and intended use

• pH range: 0.00 to 14.00.
• EC range: 0.00 to 6.00 mS/cm.
• TDS range: 0 to 4000 ppm.
• Accuracy: ±0.2 pH; ±2% of the full EC/TDS scale.
• Manual one-point calibration for pH and EC/TDS.

Operation and compatibility

Follow the procedure for the MW802. TDS is calculated from EC using this model's factor; do not compare ppm values unless the factor is the same.

Warranty under the store offer

• meter warranty: 2 years
• probe warranty: 6 months

Browse combination meters.

Milwaukee MA911B/2 is a replacement measuring probe.

Features and purpose

• Designed for: Milwaukee MC110 PRO.
• Replacement pH electrode, sold separately from the complete meter.

Operation and compatibility

Check the exact model and connection before ordering. After replacement, prepare, hydrate, and calibrate the probe according to the meter's manual. A matching connector alone does not guarantee compatibility.

Warranty offered by the store

• warranty: 6 months

Browse meters and replacement probes.

Milwaukee MC310 PRO is a stationary EC monitor with an out-of-range alarm.

Features and intended use

• EC range: 0.0 to 10.0 mS/cm.
• Resolution: 0.1 mS/cm.
• Accuracy: ±2% of full scale.

Operation and compatibility

The monitor displays EC and sounds an alarm, without automatically dosing fertilizer. Calibrate according to the MC310 instructions.

Browse monitors and controllers.

Milwaukee MW804 is a combined tester for pH, EC, calculated TDS and temperature.

Features and purpose

• pH: 0.00 to 14.00; resolution 0.01; accuracy ±0.05.
• EC: 0.00 to 20.00 mS/cm.
• TDS: 0.00 to 10.00 ppt.
• Temperature: 0 to 50°C.
• EC/TDS accuracy: ±2% of full scale.
• Automatic calibration; replaceable MI60P probe.

Operation and compatibility

Check the TDS factor and selected mode. Perform the separate pH and EC calibration procedures in the manual.

Warranty under the store offer

• meter warranty: 2 years
• sensor warranty: 6 months

Browse combo meters.

Milwaukee EC40 measures the electrical conductivity of nutrient solution using EC, CF and ppm scales.

Features and purpose

• EC range: 0.2 to 4.0 mS/cm.
• ppm scales with 0.5 and 0.7 factors.
• Factory-calibrated model.

Operation and compatibility

Clean the electrodes and check the readings according to the instructions. ppm is a value calculated from EC, not an analysis of specific salts.

Warranty under the store offer

• warranty: 2 years

Browse EC meters.

Milwaukee MA871 is a digital refractometer for readings on the Brix scale.

Features and intended use

• Range: 0 to 85% Brix.
• Measurement based on the refractive index.

Operation and compatibility

Follow the manufacturer's procedure for zeroing and cleaning the prism. Brix is not EC and does not selectively indicate the content of each dissolved component in a complex mixture.

Warranty under the store offer

• Warranty: 2 years

Browse measuring instruments in the section.

Milwaukee MP810 is a peristaltic pump for dosing with a compatible control system.

Features and Purpose

• Nominal flow rate: 1.5 L/h = 25 ml/min.
• Pump, separate from the measurement controller.

Operation and Compatibility

Connecting it to the MC122 allows you to build an automatic pH system. Check the chemical compatibility of the tubing and reagent, and set the mixing time.

Browse controllers and meters.