Everything for Seedlings

CLONEX Rooting Gel 50 ml - gel for cuttings

CLONEX Rooting Gel 50ml. is a rooting gel used by everyone from amateur to professional gardeners around the world for the most successful rooting. 

• Easy to use.
• Immediately adheres to the cut tissue, sealing it and staying on the cut.
• Contains rooting hormone at 3,000 parts per million, the full strength needed for explosive root development.
• Gel - far safer than liquids or powders, because it cannot spill or blow away. Unlike liquids and powders, Clonexrooting gel remains in full contact with the stem throughout the rooting period.
• It does not wash off when you water your plants.
• Works with its companion products Root Riot and Clonex Mist to give young plants the healthiest, strongest start in their development.

Instructions for use:

• Choose young branches/shoots from the healthiest plants. If possible, the plant tips can be sprayed withClonex Mistonce or twice a week before taking cuttings. Cut the shoot tips, each with four or five pairs of leaves, and remove the bottom two pairs of leaves.
• Always use a clean, sharp knife or blade. Make a clean diagonal cut at the base of the shoot, just below the lowest leaf node.
• Pour a small amount of ClonexRooting Gel into a separate container for immediate use. Do not dip the cut tissue into the original container or return unused Clonex Rooting Gel, as this could contaminate the remaining gel.
• Immediately dip the shoot about 15 mm into Clonex Rooting Gel, then place it in the rooting medium (rockwool, Jiffy, etc.) deep enough to be held securely.
• Spray the new cuttings with Clonex Mist and place them in a propagator. The lid and vents should be closed.
• After 2-3 days, spray the shoots again with Clonex Mist and slightly open the vents on the propagator.

Check the new roots after a few days - continue spraying with Clonex Mist until the plant is ready for transplanting. If planting in soil, carefully place the soil around the roots to avoid damaging them.

TIP: New cuttings should be kept in a closed propagator, as most plant species thrive at temperatures between 21-24°C and a relative humidity of around 90%. After new roots appear, your plant will need to be hardened off. Open the propagator slightly to let a small amount of air in. Open it a little more each day, until you eventually remove the lid completely. When the young plants are well developed, they can be placed in larger rockwool cubes or transplanted into soil or coco. Carefully place the soil around the new roots to avoid damaging them.

ROOT!T Rooting Gel 150 ml – rooting gel for cuttings

ROOT!T Rooting Gel 150 ml is a rooting gel suitable for use with ornamental plants, softwood and hardwood plants, and leaf and root cuttings. This gel adheres tightly to the cutting stem, and the convenient bottle tip allows it to be applied directly to the rooting medium (rockwool plugs, peat plugs, coconut fiber, compost, or soil). For best results, we recommend using it together with ROOT!T Natural Rooting Sponges 50 pcs.

• Roots in 3-4 days without stress or wilting, with a good root system developing from the very first day!
• Convenient bottle with a cap, so you don't have to pour it into other containers.
• Hormone-free!
• Contains vitamin B1, which helps the root system grow faster.
• "Seals" the cutting, forming a protective coating over the cut surface, thereby preventing infections and dehydration.

Instructions for use:

• Always usesterile tools when taking cuttings!
• Pour about 1 ml of the gel directly into the hole for the cutting to make sure the gel doesn't get "wiped off" when inserting the cutting!
• Make sure the cuttings are placed in the gel and rooting medium immediately to prevent wilting and retain the flow of auxins (growth hormones) moving down the stem to initiate root growth. rooting gel for cuttings!

Grodan 4×4×4 cm – mineral wool cube

Grodan 4 cm mineral wool cube, 1 pc. for rooting and hydroponics.

• dimensions: 4x4x4 cm

Eazy Plug CT150 – tray with 150 cubes

Eazy Plug CT150 tray of 150 pcs. dry rooting plugs / cubes for rooting and seedlings, made from a specially developed substrate with added nutrients, which provides good water (nutrient solution) and air conductivity—essential for developing a healthy root system from the very start.

• for seed germination or rooting cuttings / clones
• for rapid and vigorous rooting
• always perfect water/air ratio (20/80%)
• 100% biodegradable

It's that simple: just water them thoroughly and let the excess water drain away! Eazy Plug automatically regulates the optimal moisture level.

Specifications:

• plug dimensions: 2.5 х 2.5 х 3.0 см
• tray dimensions: 52.5 x 31.0 x 3.0см
• EC: 1 mS/cm
• pH: 5.9

Advantages of Eazy Plug:

• self-regulating
• easy to use
• air pruning to significantly increase root mass
• suitable for gradually drier growing conditions

Compatibility:

• Eazy Plug are compatible with all well-known growing media, such as rockwool, coco coir, black and white peat, garden soil, potting soil, soilless growing media, fine bark and wood mulch, wood fiber, perlite, pumice, sand, clay and vermiculite.

Application:

• Eazy Plug can be used in hydroponic ebb-and-flow irrigation systems (Ebb & Flow), drip irrigation, NFT*, wick systems, floating platforms, DWC*, aquaponic systems, and soil cultivation (indoors and outdoors).

Agrolite 4.30 E27 120W – LED lamp

Agrolite 4.30 LED is an innovative lighting product with four adjustable 30W panels, for a total output of 120W. The lamp's geometry, high efficiency, and low heat output make it the ideal light fixture for the stages of germination, growth and flowering.

• purpose: for growth and flowering
• power: 120W
• efficiency: 2.2 µmol/J
• lifespan: 20,000 hours
• socket: E27

Note: the lamp is sold without a socket!

You can buy a socket here!

Warning: do not use with dimmers!

Technical specifications:

Eazy Plug CT77 – tray with 77 cubes

Eazy Plug CT77 tray, 77 plugs dry plugs / rooting and seedling blocks made from a specially developed substrate with added nutrients, providing good conduction of water (nutrient solution) and air, which is very important for developing a good root system from the very beginning.

• for seed germination or for rooting cuttings / clones
• for fast and vigorous rooting
• always perfect water/air ratio (20/80%)
• 100% biodegradable

It's that simple: just water them thoroughly and let the excess water drain! Eazy Plug will automatically regulate the optimum moisture level.

Specifications:

• plug dimensions: 3.5 х 3.5 х 3.0 cm
• tray dimensions: 52.5 x 31.0 x 3.0cm
• EC: 1 mS/cm
• pH: 5.9

Advantages of Eazy Plug:

• self-regulating
• easy to use
• air pruning for significantly increased root mass
• suitable for gradually drier cultivation

Compatibility:

• Eazy Plug are compatible with all known growing media, such as rockwool, coco coir, black and white peat, garden soil, potting soil, soilless growing media, fine bark and wood mulch, wood fiber, perlite, pumice, sand, clay and vermiculite.

Application:

• Eazy Plug can be used in hydroponic irrigation systems such as ebb and flow (Ebb & Flow), drip irrigation, NFT*, wick systems, floating rafts, DWC*, aquaponic systems, and soil cultivation (indoors and outdoors).

Moistening time:

• when pouring from above < 10 seconds
• when soaking < 10 seconds
• drip irrigation - depends on the preset amount
• when bottom-watering < 45 seconds

ROOT!T Value – 24-cell tray kit

ROOT!T VALUE Rooting Sponge Propagation Kit is a complete kit for germinating seeds or rooting cuttings. The kit contains:

• propagator with a humidity control vent
• 24-cell tray
• 24 pcs. rooting sponges
• 15 ml sample of initial feed
• 15 ml sample of rooting gel
• instructions in English for optimal results
• dimensions L/W/H: 38 x 24 x 18.5 cm

ROOT!T – 60-cell seedling tray

ROOT!T Propagator Tray Insert is a 60-cell tray for rooting sponges, suitable for use in the ROOT!T propagator.

• 60 cells
• dimensions: 52x32x5cm

Ugro Benefit Rhiza1200 4 g – rooting powder

UGRO Benefit Rhiza1200 4 g is a fast-acting, non-pathogenic rooting powder that starts working within 24 hours, accelerating plant growth and improving the accumulation of valuable molecules in your plant. Its active natural ingredient, Glomus intraradices, significantly increases the biomass of the roots and shoots (sprouts / young branches).

• contains Glomus intraradices
• accelerates plant growth
• improves theaccumulation of valuable molecules in plants
• increases the biomass of roots and shoots

Application:

• Add 1 g to 5 L of water or 1 g to the substrate of each plant when transplanting.

Jiffy-7 – tray with 84 cells for 33 mm

Tray for JIFFY
84 cells

Tray specifically for Jiffy-7C 33mm blocks.

Size 52x32cm.

Jiffy-7 trays are designed to hold the blocks securely while allowing free air circulation, helping prevent disease and promote root development.

ROOT!T Cutting Mist 100 ml – cutting spray

ROOT!T Cutting Mist 100ml is a cutting spray that prevents losses during the critical first few days, when cuttings are most vulnerable. Ideal for plants with soft and semi-hard wood. You can treat the mother plant (from which you will take cuttings) with this spray 2-3 days in advance, as well as the cuttings themselves during the first three days after cutting them!

• improves rooting
• revives drooping, stressed cuttings and brings them back to life
• contains essential vitamin and mineral blends
• prevents cuttings from dehydrating
• can be used with ROOT!T Rooting Gel 150ml rooting gel or on its own

Directions for use:

• Spray the plant you will take cuttings from 2-3 days in advance!
• Spray the cuttings during the first 3 days after cutting them!

Jiffy-7 – tray with 60 cells for 41 mm plugs

tray for JIFFY
60 cells

Tray specifically for Jiffy-7C 41 mm blocks.

Size 52x32 cm.

Jiffy-7 trays are designed to hold the blocks securely while allowing air to circulate freely, helping prevent disease and promoting root development.

ROOT!T – propagator tray 57×37 cm

ROOTiT Propagator Tray is a tray / base for the ROOT!T propagator.

• equipped with longitudinal channels to prevent overwatering
• dimensions: 57x37x5.5cm.

Solux i-Clone 2×20W – LED for seedlings

🔹 Solux i-Clone 2x20W LED Tube is high-quality lighting designed to provide optimal illumination for rooting cuttings and maintaining mother plants. With its full-spectrum lighting and the ability to connect up to 10 tubes in series, this product offers flexibility and efficiency for any indoor garden.

🔹 Detailed specifications:

• Manufacturer: Solux
• Model: i-Clone 2x20W LED Tube
• Type of lighting: LED tube with two 20W LEDs
• Color temperature: 6500K (suitable for vegetative growth and flowering)
• Light efficacy: 2.4 μmol/s per watt
• Product lifespan: 55,000 hours
• Dimensions: 120 cm long
• Weight: 330 g
• IP rating: IP65 (resistant to dust and moisture)
• Connection: Can connect up to 10 tubes in series via IP65 input/output
• Package contents: 2 LED tubes, power cable, mounting brackets

🔹 Recommendations and instructions for use:

1. Choose a suitable location for installing the tubes, ensuring good light distribution.
2. Use the included mounting brackets to attach the tubes to a wall or ceiling.
3. Connect the tubes in sequence using the IP65 input/output connectors to link up to 10 tubes in series.
4. Connect the power cable to the first tube and plug it into the mains.
5. Adjust the lighting to suit the plants’ needs, providing an appropriate photoperiod and light intensity.

✅ Benefits:

• Improved rooting: Stimulates fast, healthy rooting of cuttings.
• Maintaining mother plants: Provides optimal conditions for keeping mother plants healthy.
• Flexibility: Can connect up to 10 tubes in series, making it easy to expand the lighting system.
• Energy efficiency: Low energy consumption and a long product lifespan.
• Durability: IP65 protection against dust and moisture, suitable for various indoor environments.

ROOT!T – heat mat thermostat

ROOT!T Thermostat for Heat Mat is an electronic device that gives you full control over the temperature in the root zone during germination / rooting. By switching the heating mats on and off, the device maintains the set desired temperature precisely (10-30ºC). Compatible with all ROOT!T heating mats.

• Maintain the optimal temperatures for your plants!
• Easy to switch on!
• Easy to use and control!
• sensor cable length: 1.8m.
• max. load: 1000W / 4.3A

Preparing for operation:

1. Place the temperature sensor in the propagator or the area to be heated. It can be hung using the rubber suction cup or placed in the substrate (photo 3).
2. Place the thermostat outside the propagator or growing area - the thermostat and output socket must always be kept in a dry place! DO NOT IMMERSE IN WATER OR LIQUIDS!
3. Plug the heating mat or other heater into the output socket.
4. Connect the thermostat to the power supply - the POWER indicator should light up.
5. Continue to set the desired temperature to maintain.

Setting the thermostat:

The display shows the current temperature at the sensor. Press UP to display degrees Fahrenheit ºF or DOWN to display Celsius ºC - the corresponding indicator will light up.

1. Press the SET button to display the desired temperature; after 3 seconds, it will return to the current temperature.
2. Press and hold the SET button for 3 seconds; the display will start flashing - press UP or DOWN to select the desired temperature to maintain.
3. Press SET again to return to displaying the current temperature. Leave it, and it will return to displaying the current temperature after 30 seconds.

The HEATING indicator will light up if the current temperature is lower than the desired temperature - the heating mat / heater is now operating ON. The HEATING indicator will not light up if the current temperature is higher than the desired temperature - the heating mat / heater is not operating now OFF.

Glass House Propagator 64 – mini greenhouse

Glass House Propagator 64 is a propagator made of high-quality rigid plastic, suitable for germination, small plants or cuttings.

• size: 59x39x24cm.
• sturdy, durable and waterproof polypropylene tray
• transparent, impact-resistant polystyrene lid for maximum light transmission
• sliding ventilation vents for easy humidity control

Ferro RADIX 60 ml – Rooting product

Ferro RADIX is a liquid product for treating cuttings during rooting, in a 60 ml package.

Selection and application

Apply according to the label instructions and the growing conditions for the cuttings.

Follow the product label instructions for dosage, application, and compatibility.

Plagron SeedBooster Plus 10 ml – for germination

PLAGRON SeedBooster Plus 10ml. is a powerful and safe fertilizer for the first stage of plant growth. It provides young plants with all the essential nutrients, significantly accelerating the growth process.

• Make seed germination even more successful!
• Significantly accelerates growth in young plants.
• Supplies the plant with all essential nutrients.
• NPK: 5-4-7

Instructions for use:

• Shake well before use!
• Dissolve 7 drops of Seedbooster Plus in 1L of water at the recommended temperature of 23ºC. Then leave your plant seeds to soak in this solution for 12 hours.
• Apply Seedbooster Plus for up to one week after rooting to protect your young plants.

Grodan – 77 mineral wool cubes with tray

Grodan stone wool cubes - tray of 77 for rooting.

• tray size: 53x32cm.
• cube size: 3.5x3.5x4cm.

Cultilene – 77 rockwool cubes with tray

Cultilene rockwool cubes - tray of 77 for rooting.

• tray size: 53x32 cm
• cube size: 3.5x3.5x4 cm

VDL propagator 59×39×21 cm – for seedlingsPropagator 39 x 59 x 21 cm Vdl is a high-quality, reusable seedling container that provides perfect protection and optimal conditions for the development of young plants and seeds. This propagator measures 39 cm x 59 cm x 21 cm, making it ideal for home use or small gardens. It is designed with a transparent lid for maximum visibility and monitoring of plant growth, while allowing plenty of light to reach the seeds or young plants. The lid of the Vdl propagator is equipped with ventilation openings that allow humidity and temperature inside the container to be adjusted, providing temperature control and the proper air circulation necessary for healthy plant growth. With the Propagator 39 x 59 x 21 cm Vdl, you can improve your chances of successful propagation by providing your seeds and young plants with the optimal growing conditions they need.

Clonex Mist 300 ml – spray for cuttings

Clonex MIST 300ml. is the latest innovation in cloning technology, developed to make cloning even more successful. An innovative, complex combination of amino acids and mineral nutrients to accelerate healthy rooting. Clonex Mist is a ready-to-use product that provides:

• rapid root formation
• healthy plants
• consistent results every time

Instructions for use:

• Choose a healthy plant with good, healthy tips. If possible, the plant tips can be sprayed with Clonex Mist once or twice a week before taking cuttings. 
• Use a sharp, clean blade, such as a scalpel, to make a diagonal cut at the base of the stem, just below the lowest leaf node.
• If you have Clonex rooting gel, promptly dip the cutting in the gel.
• Then immediately place the cutting in the growing medium (rockwool, Jiffy, etc.) that you have previously moistened.
• Spray the new cuttings with Clonex Mist and place them in a propagator. The lid and vents should be closed.
• After 2-3 days, spray the shoots again with Clonex Mist and open the propagator vents slightly.

Check for new roots after a few days - continue spraying with Clonex Mist until the plant is ready for transplanting. If planting in soil, gently place the soil around the roots to avoid damaging them.

TIP: Repeat spraying every 2-3 days or whenever your cuttings look dry. Open the vents of the propagator a little more each day. Light condensation inside the propagator indicates suitable relative humidity.

ROOT!T 40×60 cm - heating mat

ROOT!T Medium Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is key to success in the early stages, when young plants are at their most delicate and vulnerable. 

• Dimensions W/D: 40x60cm.
• Speeds up seed germination or clone rooting by whole days.
• Warms the root zone by 5.5-11˚C above the ambient temperature.
• Fully waterproof, scratch-resistant, and durable.
• To set your desired precise temperature, use together with the ROOT!T thermostat for heating mats.

Instructions for use:

1. Place the heating mat on a thoroughly dried surface.
2. For best results, place the mat on an insulated surface, not directly on a cold floor.
3. Place the tray with seedlings (seeds, clones) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains (220-240V).
5. This heating mat is designed to warm the root zone by 5.5-11˚C above the ambient temperature.

Caution:

• Improper use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly in the tray / propagator, and do not cover it with soil or other growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

Propagator Pro 70 – mini greenhouse for seedlings

Propagator Pro 70 seedling growing kit is sturdy and durable. It is easy to ventilate using the ventilation vents in the lid. The walls and lid are slightly angled so that condensed water runs to the sides rather than onto the plants.

• Dimensions: 58cm long, 38cm wide, 24cm high
• The kit includes: a waterproof tray and lid
• The lid is equipped with adjustable ventilation vents
• Made from hard, dense plastic - does not bend
• Material: polypropylene PP (tray) and polystyrene PS (lid)

The propagator is sold without a tray with sowing cells (insert). Suitable options include:

Eazy Plug CT150  and Eazy Plug CT77

Cultilene rockwool cubes - tray of 77

Jiffys-7 - 41mm tray with 60 cells

You can also place small pots inside: Soft seedling pot 7x7x8cm

Secret Jardin Cosmorrow Power 20W

Secret Jardin Cosmorrow Power 1x20W is a power supplyfor one20W LEDstrip from the Cosmorrow series.

• power: 20W
• voltage: 100-220V
• frequency: 50/60 Hz
• weight: 0.35 kg
• protection: IP54