Programmers and Ready-Made Irrigation Systems

The PLANTiT Water Timer is designed to connect to a tap, but can also be used for gravity-fed irrigation from a barrel or tank. The timer is programmed in just 2 easy steps - turn the Run Time dial to set your desired watering duration, and the Frequency dial to set the desired interval between waterings. Then connect it to the irrigation outlet pipe and the timer will take care of the rest.

• Designed to connect to a tap
• The protective cover makes it fully waterproof
• Powered by two 1.5V AAA batteries (not included), which can last a whole season without needing replacement
• Automatic shut-off valve for when the battery runs out, and a program delay button for when you need to maintain your plants and don't want to water them
• Supplied with a set of fittings and a built-in filter

Technical specifications:

• Operating pressure range: 0-150 PSI (0-10 BAR)
• Connection: ¾ male / female connector / hose connector
• Frequency: choose to irrigate every 1, 2, 3, 4, 6, 8, 12, 24, 48 or 72 hours, or once a week
• Run time (watering): 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes

Before setting the watering schedule

Take the inlet pressure, water source and watering duration into account. Check the flow rate with a test cycle.

Browse irrigation timers and ready-made irrigation systems.

Telescopic shower sprayer, 91 to 147 cm.

Product details

Telescopic shower sprayer 91–147 cm

Telescopic shower sprayer 91-147 cm

Before the first watering

Check the power supply, required inlet pressure, and permitted operating intervals. Test the watering and check for leaks before relying on the set schedule.

Browse irrigation controllers and kits.

MiniFogger, automatic cordless fine-mist sprayer with 2 speeds.

Product details

MiniFogger - cordless sprayer

MiniFogger features a sleek, compact cordless design that makes it easy to carry. With 2 spray modes, it lets you tackle more tasks with greater precision or wider coverage.

Before your first watering

Check the power supply, required inlet pressure and permitted operating intervals. Test the system and check for leaks before relying on the set schedule.

Browse irrigation controllers and ready-made irrigation systems.

The Wassertech automatic watering system for 10 plants is a kit that runs on 4 AA batteries (not included) and features a pressure pump, a timer, and up to 10 m of tubing, which can be cut to length as needed. Suitable for indoor and outdoor use, it ensures regular watering while you are away. 

Detailed specifications

• Power supply: 4 AA batteries; no mains electricity required.
• Pump: submersible pump that supplies water from a reservoir to the plants.
• Tubing: approximately 10 m of tubing, which can be cut to the required length.
• Control: timer that can be programmed for watering frequency and duration.
• Consumption / weight: approximately 0.5 kg 

Usage recommendations

• Use a reservoir with sufficient capacity if you will be away for several days—the larger it is, the longer the system will keep watering.
• Set the timer according to your plants’ needs—frequency + duration. For example, you can set the frequency to 0.1 days for more intensive watering, or leave several days between watering sessions depending on the season.
• Check the batteries regularly, especially in high temperatures or during extended use, to prevent watering from stopping.
• If the tubing is long or has many branches, make sure the pump is powerful enough and the reservoir is close enough to maintain pressure.

Benefits

This system provides convenient, automated watering for up to 10 plants without the need for electricity, making it suitable for balconies, greenhouses, or when you are away temporarily. With a timer and adjustable cycles, it provides even, regular watering, while the tubing and pump allow for flexible installation to suit the space and plants’ needs.

Before the first watering

Check the power supply, required inlet pressure, and permitted operating intervals. Test the system and check for leaks before relying on the set schedule.

Browse irrigation controllers and kits.

The Water Master Solar Irrigation Kit is an intelligent, fully autonomous irrigation system powered by solar energy. It automatically waters plants without requiring electricity, cables, or complex installations – an ideal solution for gardens, patios, and balconies.

The system uses a solar panel to power a pump that distributes water through hoses and drip emitters. This provides even, precise irrigation while saving water and energy.

With adjustable watering times and frequency, the kit adapts to the needs of each plant. This ensures optimal growth with minimal effort on your part, even when you're away from home. 

Key features

✔️ Solar panel: 1.5 W for autonomous operation
✔️ Pump flow rate: approximately 45 L/hour
✔️ Adjustable irrigation: from 15 sec. to 30 min.
✔️ Frequency: from 1–2 times a day to once every 7 days
✔️ 15 m hose (1/4") for covering a larger area
✔️ 15 micro-drippers for precise watering
✔️ Low water level sensor (protects the pump)
✔️ Non-return valve and filter for a clean flow
✔️ USB-C charging in cloudy weather
✔️ Easy installation with no tools required

Advantages

✔️ Fully autonomous system – operates without electricity
✔️ Saves water through drip irrigation with controlled watering
✔️ Energy-efficient – uses solar power
✔️ Customizable settings to suit your plants' needs
✔️ Ideal when you're away – waters automatically
✔️ Easy installation and minimal maintenance

 Application

The Water Master Solar Irrigation Kit is suitable for watering pots, gardens, vegetable beds, and greenhouses. An excellent solution for outdoor areas without access to electricity.

Perfect for home gardeners and plant enthusiasts who want convenience, efficiency, and an eco-friendly way to keep plants healthy with minimal effort.

How to use:

Submerge the hose in the reservoir or connect it to a water supply.

Set the irrigation duration (15 sec – 30 min) and frequency (1–2 times a day to once every 7 days).

The solar panel powers the pump and automatically starts irrigation.

The additional USB-C input allows charging even in cloudy weather.

Before the first watering

Check the power supply, required inlet pressure, and permitted operating intervals. Test the watering and check for leaks before relying on the set schedule.

Browse timers and irrigation kits.

Make watering your garden easy as child's play with the Water Master irrigation timer! Setting the timer takes just 2 easy steps - turn the Run Time dial to set your desired watering duration, and the Frequency dial to set the desired interval between waterings. Then connect it to your garden hose using a standard quick connector, and the timer will take care of the rest!

• uses an efficient solenoid valve
• up to 8 waterings per day
• programs the frequency and watering duration
• quick and easy to install on any tap

Technical specifications:

• Frequency (Frequency / Frequency): you can set watering every 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or 1 week
• Run time / watering (Active time / Runtime): 1, 3, 5, 10, 15, 20, 30, 60, 90, or 120 minutes
• Connections: ¾ male and ¾ female connector
• Batteries: 2 x AAA (not included)

Before setting the watering schedule

Take the inlet pressure, water source, and watering duration into account. Check the amount delivered with a test cycle.

Browse irrigation timers and ready-made irrigation systems.

Rain My Farm Balcony is a ready-to-use automatic drip irrigation kit for up to 30 pots. It includes an AMICO+ timer and all the tubing, fittings and drippers needed to quickly set up an irrigation system. This practical solution is ideal for balconies, patios, yards, greenhouses and conservatories, providing even, water-efficient irrigation even when you're away from home.

Drip irrigation is one of the most effective ways to maintain optimal moisture levels for plants while significantly reducing water consumption. The My Farm Balcony set is a ready-to-use DIY solution that makes it easy to build an automatic irrigation system without specialist tools or technical knowledge.

The set can irrigate up to 30 pots using individual drippers that deliver water directly to the root system. This gives plants the water they need without losses from evaporation or runoff. The result is healthier growth, a lower risk of overwatering and significantly lower water consumption.

The set includes the AMICO+ timer, which allows fully automatic irrigation control. The large LCD with automatic backlighting makes settings easy, and programming takes just a few simple steps: setting the start time, duration and watering frequency. This ensures reliable, precise irrigation even while you're on holiday or away for an extended period.

Technical specifications

✔️ Manufacturer: Rain S.p.A.

✔️ Series: My Farm Balcony

✔️ Type: Automatic drip irrigation kit

✔️ Maximum capacity: up to 30 pots

✔️ Timer included: AMICO+

✔️ Installation: Connects to a standard water tap

✔️ Irrigation type: Drip

✔️ Suitable for indoor and outdoor use

✔️ Easy installation without specialized tools

✔️ Expandable with additional Rain components.

📦 Kit includes

✔️ 1 × AMICO+ timer

✔️ Main polyethylene tube

✔️ Capillary tubing

✔️ Drippers for up to 30 plants

✔️ Connecting fittings

✔️ End caps

✔️ Fixing clips

✔️ Adapters for connecting to a water source

✔️ Detailed installation instructions.

Benefits

✔️ Automatically waters up to 30 pots

✔️ Significantly reduces water consumption

✔️ Maintains consistent substrate moisture

✔️ Protects plants from drying out while you’re away

✔️ Easy DIY installation

✔️ Timer with digital display included

✔️ Individual water supply to each plant

✔️ Suitable for balconies, terraces, greenhouses, and gardens

✔️ Compatible with Rain components for future expansion.

📋 Instructions for use

1. Connect the AMICO+ timer to the water tap.
2. Position the main tube according to the arrangement of the pots.
3. Connect the capillary tubes and drippers to each pot.
4. Set the desired watering time, duration, and frequency using the timer.
5. Start the system and check that all the drippers are working properly.
6. Adjust the position of the drippers as needed for optimal watering.

⚠️ Important: Before first use, flush the system with clean water to remove any debris from the pipes. Using a filter at the water source is recommended, especially with harder or contaminated water, to prevent the drippers from clogging.

💡 Urban Botaniks tip: If you use pots of different sizes, position the drippers so the water reaches as close as possible to the base of each plant. This will ensure even moisture throughout the root system and make watering more efficient.

Before the first watering

Check the power supply, required inlet pressure, and permitted operating intervals. Run a test watering cycle and check for leaks before relying on the set schedule.

Browse timers and irrigation kits.

Water Master is a high-quality digital irrigation timer, designed specifically to control drip irrigation and sprinkler irrigation systems. 

• uses an efficient solenoid valve
• up to 8 watering cycles per day
• programming of frequency and watering duration
• easy and quick to install on any tap

Specifications:

• Connections: ¾ male and ¾ female connector
• Batteries: 2 x AAA (not included)

Before setting up the watering schedule

Take into account the inlet pressure, water source, and watering duration. Check the amount of water delivered with a test cycle.

Explore timers and ready-made irrigation systems.

A reliable, easy-to-set water timer for one watering zone — automates watering in a garden, greenhouse, or balcony, so plants receive water regularly without manual intervention.

• Type: 1-zone digital water timer.
• Operating pressure: 0.5 – 8 bar (≈ 7 – 116 PSI).
• Maximum flow rate: up to 35 L/min.
• Watering duration: from 1 to 240 minutes (up to 4 hours).
• Watering frequency: from every 1–12 hours or at intervals of 1–7 days — selected according to the plants’ needs.
• Power supply: 2 × AA (1.5 V) batteries.
• Operating temperature range: 3 °C – 50 °C.
• Valve / Connections: standard faucet/hose threads.
• Low-battery indicator and frost protection — at temperatures below ~3 °C, remove the device to avoid damage.
• Operating modes: automatic (on a schedule), manual watering (without changing the main schedule), and “Rain-Delay” (delaying watering due to rain/humidity).

Recommendations for use

• Install the timer on a standard garden faucet or hose, before the pipe/hose leading to the plants.
• Set a schedule: choose a convenient start time, duration, and frequency — this allows regular watering without manual intervention.
• When you’re away or your schedule is unpredictable, the timer ensures your plants get water even when you’re not there.
• For winter: remove the device if freezing temperatures are expected — the water inside may freeze and damage the housing.
• Maintain normal pressure (0.5–8 bar) and good flow rate — if the pressure is too low or too high, or the filters are clogged, watering may be disrupted.

Before setting up irrigation

Take into account the inlet pressure, water source, and watering duration. Check the amount delivered with a test cycle.

Browse timers and ready-made irrigation systems.

Automatic irrigation system for up to 10 pots at once — provides regular, even watering when you're away or don't have time to water by hand.

Detailed Specifications

• Type: automatic drip/micro-irrigation system (drip irrigation / micro-drip system). 

• Suitable for: pots, terraces, balconies, greenhouses, or small gardens — up to 10 individual plants (pots). 

• Material: plastic components (tubing, fittings), resistant to moisture and standard garden conditions. 

• Power / control: the system includes a control unit (timer / valve) for automatic water delivery on a set schedule. 

• Suitable water pressure and flow rate: a system for home gardens and pots — no professional plumbing required.

• Use: automatic watering of pots/containers — can reduce the need for manual watering, especially when you're away.

Usage Recommendations

• Connect the system to a water source — a tap, faucet, or hose — and place one tube in or beside each container or pot.

• Set a watering schedule (frequency and duration) based on your plants' needs — more often for leafy greens and flowers, less often for hardy or deep-rooted plants.

• When planting or transplanting — make sure the soil is well moistened before watering and that the system is set to deliver a moderate amount of water.

• If you're away — the system will automatically maintain moisture, but it's a good idea to check the tubing and water distribution periodically to prevent blockages.

• For maximum effectiveness — pair with well-drained pots and a suitable growing medium to prevent overwatering.

Before Setting Up Irrigation

Take into account the inlet pressure, water source, and watering duration. Check the amount of water delivered with a test cycle.

Browse timers and ready-made irrigation systems.

AgroDrip 30 is a ready-to-use drip irrigation kit designed for up to 30 pots or plants. The system delivers water precisely to the root zone, reducing water consumption and making daily plant care easier. The kit is suitable for balconies, patios, greenhouses, and small gardens, and can be easily connected to a water tap.

AgroDrip 30 is a practical solution for setting up a compact drip irrigation system without the need for specialized tools. Thanks to the included microtubing, drippers, and fittings, installation is quick and easy, and each plant receives the water it needs directly in the root zone. This improves plant growth and significantly reduces water loss through evaporation.

The kit is suitable for watering up to 30 pots and can be easily adapted to suit the arrangement of the plants. If needed, the system can be combined with an irrigation timer for automatic watering, enabling fully automated operation and hassle-free irrigation even when you are away.

Drip irrigation maintains consistent substrate moisture, limits overwatering, and creates optimal growing conditions for vegetables, herbs, ornamental plants, and flowers both outdoors and in greenhouses.

Technical specifications

✔️ Manufacturer: Agrodrip 

✔️ Model: Agrodrip 30

✔️ Type: Drip irrigation kit

✔️ Capacity: up to 30 pots or plants

✔️ Installation: To a water tap

✔️ Suitable for outdoor and indoor use

📦 The kit includes:

✔️ Pipe Ø16 mm – 15 m

✔️ Microtube Ø6 mm – 30 m

✔️ 20 pcs. Quick connector Ø16 x 3/4" 

✔️ 100 pcs. Adjustable stake drippers

✔️ 20 pcs. Stake drippers

✔️ 20 pcs. Ribbed tee Ø6 mm 

✔️ 2 pcs. Ribbed tee Ø16 mm

✔️ 2 pcs. Ribbed elbow Ø6 mm

✔️ 2 pcs. Ribbed elbow Ø16 mm

✔️ 1 pc. Ribbed connector Ø7 mm x Ø6 mm

✔️ 1 pc. Punch Ø7 mm 

✔️ 2 pcs. Ribbed connector Ø16 mm 

✔️ 10 pcs. Ribbed plug Ø6 mm  

✔️ 2 pcs. End clip Ø16 mm 

Applications

Suitable for:

• Potted plants

• Balcony flowers

• Potted vegetables

• Herbs

• Greenhouses

• Terraces

• Winter gardens

• Yards

• Home and professional gardens.

📋 Instructions for use

1. Connect the kit to a water tap using the included adapters.
2. Position the main microtube according to the location of the pots.
3. Install the tees, elbows, and drippers for each plant.
4. Check the system for leaks and proper water distribution.
5. If desired, connect the system to an irrigation controller for automatic watering.
6. Check the drippers periodically and clean them as needed.

⚠️ Important: For reliable operation and a longer system lifespan, we recommend using filtered water or installing a filter upstream of the system. This reduces the risk of clogged drippers and ensures even watering.

💡 Tip from Urban Botaniks: For fully automatic irrigation, pair AgroDrip 30 with an irrigation controller. This way, plants will receive the right amount of water on specific days and at specific times, even when you're away from home.

Before the first watering

Check the power supply, required inlet pressure, and permitted operating intervals. Test the irrigation system and check for leaks before relying on the set schedule.

Browse irrigation controllers and kits.

AgroDrip 15 is a ready-to-use drip irrigation kit designed for up to 15 pots or plants. The system delivers water precisely to the root zone, reducing water consumption and making daily plant care easier. The kit is suitable for balconies, terraces, greenhouses, and small gardens, and can be easily connected to a water tap.

AgroDrip 15 is a practical solution for setting up a compact drip irrigation system without the need for specialized tools. Thanks to the included microtubes, drippers, and fittings, installation is quick and easy, and each plant receives the required amount of water directly in the root zone. This improves plant growth and significantly reduces water loss through evaporation.

The kit is suitable for watering up to 15 pots and can be easily adapted to suit plant placement. If needed, the system can be combined with an irrigation timer for automatic watering, ensuring fully automated operation and hassle-free irrigation even while you are away.

Drip irrigation maintains consistent substrate moisture, limits overwatering, and creates optimal growing conditions for vegetables, herbs, ornamental plants, and flowers, both outdoors and in greenhouses.

Technical specifications

✔️ Manufacturer: Agrodrip 

✔️ Model: Agrodrip 15

✔️ Type: Drip irrigation kit

✔️ Capacity: up to 15 pots or plants

✔️ Installation: Connects to a water tap

✔️ Suitable for indoor and outdoor use

📦 Kit includes:

✔️ Microtube Ø6 mm – 30 m

✔️ Microtube Ø7 mm – 1 m

✔️ 15 pcs. stake drippers

✔️ 20 pcs. barbed tees Ø6 mm

✔️ 2 pcs. barbed elbows Ø6 mm

✔️ 1 pc. barbed connector Ø7 × Ø6 mm

✔️ 1 pc. male connector 1/2" × Ø7 mm

✔️ 1 pc. reducing coupler 3/4" × 1/2".

Application

Suitable for:

• Potted plants

• Balcony flowers

• Potted vegetables

• Herbs

• Greenhouses

• Terraces

• Winter gardens

• Yards

• Home and professional gardens.

📋 Instructions for use

1. Connect the kit to a water tap using the included adapters.
2. Position the main microtube according to the placement of the pots.
3. Install the tees, elbows, and drippers for each plant.
4. Check the system for leaks and proper water distribution.
5. If desired, connect the system to an irrigation timer for automatic watering.
6. Periodically check the drippers and clean them as needed.

⚠️ Important: For reliable operation and a longer system lifespan, we recommend using filtered water or installing a filter upstream of the system. This reduces the risk of clogged drippers and ensures even watering.

💡 Tip from Urban Botaniks: For fully automatic irrigation, pair AgroDrip 15 with an irrigation timer. This way, your plants will receive the required amount of water on specific days and at specific times, even when you’re away from home.

Before the first watering

Check the power supply, required inlet pressure, and permitted operating intervals. Test the irrigation system and check for leaks before relying on the set schedule.

Browse irrigation timers and ready-made irrigation systems.

Automatic watering timer for 1 zone, controlling water supply according to a set schedule—ideal for gardens, greenhouses, flower beds, and hose-based irrigation systems.

• Type: 1-zone electronic timer.
• Power: 2xAA batteries
• Material: ABS+PP housing, resistant to outdoor conditions.
• Operating pressure: approximately 0.5–8 bar, suitable for standard plumbing and hose systems.
• Watering settings: set the frequency—from hourly to daily—and repeat intervals from 1 to 7 days.
• Features: automatic watering, waterproof housing, ideal for home gardens and greenhouses.

Usage recommendations

• Connect the timer to a standard hose or irrigation system, then set the desired watering time and frequency—the device will take care of the rest automatically.
• Suitable for gardens, balconies, greenhouses, pots, and flower beds—anywhere you cannot water by hand every day.
• A good choice when you are away (on vacation, traveling, etc.) to maintain regular moisture.
• Use only when the water pressure is between 0.5 and 8 bar

Before setting the watering schedule

Take the inlet pressure, water source, and watering duration into account. Check the water volume delivered with a test cycle.

Browse irrigation controllers and ready-made irrigation systems.

Water Master electric sprayer with a capacity of 2 liters, designed for precise and convenient application in the garden, hydroponics, or home. Lightweight, ergonomic design with an adjustable nozzle for a fine mist or powerful stream. Powered by a 2000 mAh lithium battery that charges quickly via USB‑C. Made from recyclable materials for a longer service life. 

Detailed specifications

• Capacity: 2 liters
• Material: recyclable ABS, PP, and HDPE
• Battery: lithium, 2000 mAh, 3.7 V
• Charging: USB Type‑C cable (included)
• Dimensions: ø13 × 28.7 cm
• Weight: ~550 g
• Nozzle: adjustable for mist or stream
• Design: lightweight, ergonomic, easy to use even in hard-to-reach areas

Usage recommendations

• Fully charge before use with the supplied USB‑C cable.
• Use the mist setting for precise irrigation or stream when concentrated application is needed.
• Thanks to the recyclable material and built-in battery, the product is more eco-friendly.
• Suitable for irrigation, fertilizing, and pest spraying.

Summary – Benefits

• Convenient capacity: 2 liters — ideal for quick tasks.
• USB-C rechargeable battery: a convenient, rechargeable solution without the need for extra batteries.
• Flexible spraying: adjust between mist and stream.
• Compact and durable: lightweight and ergonomic, made from durable materials.
• Eco-friendly choice: recyclable housing, less waste.

Before the first watering

Check the power supply, required inlet pressure, and permitted operating intervals. Test the irrigation system and check for leaks before relying on the set schedule.

View timers and ready-made irrigation kits.