OptiClimate Air Conditioners

OptiClimate 10000, replacement carbon filter Replacement carbon filter for OptiClimate PRO 3 or PRO 4. OptiClimate PRO 3 and PRO 4 series air- and water-cooled climate systems feature built-in dust and carbon filters. The OptiClimate carbon filter removes mold spores from the air and should be replaced every 10 to 12 weeks. One replacement set contains three filters.

OptiClimate 15000 PRO3, connection kit "Opticlimate 15000 Pro3" is a high-quality water chiller designed for climate control in large spaces. The water-cooled OptiClimate 15000 PRO3 air conditioner has a cooling capacity of 15 kW, uses between 5 and 9 liters of water per minute, and has 3 heating elements rated at 2700 W. Name: OptiClimate 15000 PRO3 Voltage: 400V Cooling capacity: 15000W Water consumption: 5.0-9.0 L/min*** Power consumption: 3100W Phase: 3* Connection: 3-phase D25 4.0mm2 cable (the compressor of this unit is divided across 3 phases) Heating elements: 3x2700W Dehumidification capacity: 270 L/24h** Dimensions: 121x70x54 Weight: 160 kg * For two-phase and three-phase connections, one heating element per connected phase. ** At 80% humidity and an ambient temperature of 30°C. *** At a cooling water temperature of 6°C to 20°C.

OptiClimate Plenumbox 6000, supply box

Easily connect ducting to your OptiClimate with this supply box!

The OptiClimate supply box has a sturdy insulated casing and is installed at the rear of your OptiClimate 6000 PRO3 climate control system. With it, you can place the OptiClimate outside the grow room. And if you connect it to a 3-way damper*, you can use your OptiClimate in two separate rooms. 

• allows the OptiClimate climate control system to be placed outside the grow room
• can be used to split one OptiClimate climate control system between two separate rooms
• compatible with OptiClimate 6000 PRO3
• four pre-drilled holes for easy duct attachment
• dimensions: 48 x 40 cm
• hole diameter: ⌀ 250 mm

OptiClimate Plenumbox 3500, supply air box

Easily connect ducts to your OptiClimate with this supply air box!

The OptiClimate supply air box has a sturdy insulating casing and is installed at the back of your OptiClimate 3500 PRO3 air conditioning system. It lets you place the OptiClimate outside the grow room. If you connect it to a 3-way damper*, you can use your OptiClimate in two separate rooms.

• allows you to place the OptiClimate air conditioning system outside the grow room
• can be used to split one OptiClimate air conditioning system between two separate rooms
• compatible with OptiClimate 3500 PRO3
• four perforated openings for easy duct attachment
• dimensions: 60 x 50 cm
• opening diameter: ⌀ 250 mm

OptiClimate 3500, carbon filter set

Carbon filter set for the OptiClimate 3500 PRO 3 water-cooled air conditioner. The carbon filters remove odors and mold spores from the air. The set contains three filters (a 12-week supply). We recommend replacing the filter every 4 weeks. 

• 3 carbon filters for OptiClimate 3500 PRO 3
• dimensions: 48 x 40.5 cm

OptiClimate 6000, carbon filter set

Carbon filter set for the water-cooled air conditioner OptiClimate 6000 PRO 3. Carbon filters remove odors and mold spores from the air. The set contains three filters (a 12-week supply). We recommend changing the filter every 4 weeks. 

• 3 carbon filters for OptiClimate 6000 PRO 3
• dimensions: 59.7 x 49 cm

OptiClimate 3500 PRO3, water-cooled air conditioner

OptiClimate 3500 PRO3 is a water-cooled air conditioner that cools the air using water and heats it with ceramic heaters. It is a self-contained climate control system that perfectly controls the indoor climate, consuming as little energy as possible. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. The hot water is then drained through the water outlet or recycled.

• functions for: cooling, heating, air dehumidification (dehumidifier), circulation and air filtration .
• power consumption 230V: 740W
• cooling capacity: 3.5kW (for 6 x 600 HPS)
• dehumidifies: 55 L (per 24 h)
• water consumption: 1-2 L/min
• 2 x 1500W ceramic heaters
• flange diameter: ⌀ 250 mm (1 included)
• dimensions: 100 x 50 x 42 cm
• weight: 57 kg
• warranty: 1 year

Why choose OPTICLIMATE?

This is ideal for cooling properties near water sources such as canal houses, floating homes, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings too, where an outdoor unit cannot be installed. If your house has a swimming pool, you can use the water-cooled OptiClimate to cool your house and heat the pool.

• The PRO3 comes with a remote control (controller) included, allowing all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (in night mode) and maximum temperature (in day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dehumidifies the air. If necessary, using the included hygrostat, OptiClimate can also dehumidify in the night setting, thereby reducing humidity.

• OptiClimate dehumidifies by continuously finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

SAFE AND RELIABLE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example, if the water supply is restricted.
2. Opticlimate is fire-safe, as all electrical components, including the heating elements and connections, are installed in a steel housing.
3. Opticlimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*

OptiClimate Plenumbox 10000, air supply box Air supply box suitable for OptiClimate PRO 3 or PRO 4. OptiClimate Plenumbox 10000 for the PRO3 or PRO4 model. The Plenumbox is an insulated box that can be installed at the rear of the OptiClimate 10000 PRO3 and PRO4. The distribution box makes it possible to place the OptiClimate outside the room or use the Dual Room System with a three-way valve. The distribution box comes with four perforated openings that can be used to secure the air hose. Suitable for: OptiClimate 10000 PRO3 and PRO4 Dimensions: 688 x 497 mm Flange: 355 mm Specially for: When the OptiClimate is placed outside the room

OptiClimate 6000 PRO3, water-cooled air conditioner

OptiClimate 6000 PRO3 is a water-cooled air conditioner that cools the air using water and heats it with ceramic heaters. This is a standalone climate control system that perfectly controls the indoor climate, consuming as little energy as possible. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. This hot water is then drained through the water outlet or recycled.

• functions: cooling, heating, air dehumidification (dehumidifier), circulation and air filtration.
• power consumption 230-400V: 1450W
• cooling capacity: 6.0kW (for 10 x 600 HPS)
• dehumidifies: 100L (per 24h)
• water consumption: 2-4L/min
• 3 x 1500W ceramic heaters
• flange diameter: ⌀ 250mm (1 included)
• dimensions: 115 x 53 x 43cm
• weight: 80kg
• warranty: 1 year

Why choose OPTICLIMATE?

This is ideal for cooling properties near water sources such as canal houses, floating homes, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings where an outdoor unit cannot be installed. If your home has a swimming pool, you can use the water-cooled OptiClimate to cool your home and heat the pool.

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored simultaneously. Once the minimum temperature (in night mode) and maximum temperature (in day mode) have been set using the remote control, OptiClimate will heat or cool, depending on the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dehumidifies the air. If necessary, using the included humidistat, OptiClimate can also dehumidify in the night setting, thereby reducing humidity.

• OptiClimate dehumidifies by continuously finding the right balance between heating and cooling. This allows the dehumidification function to work even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

SAFE AND RELIABLE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights turn off if the set maximum temperature is exceeded, for example, when the water supply is disrupted.
2. Opticlimate is fire-safe, as all electrical components, including the heating and connections, are mounted in a steel housing.
3. Opticlimate has an alarm output that can be used to send an SMS alert in case of a malfunction.

Instructions for use in English: here*

OptiClimate 15000 PRO3, water-cooled air conditioner

The Opticimate 15000 PRO3 is a water-cooled air conditioner that cools the air using water and heats it with ceramic heaters. It is a standalone climate control system that perfectly controls the indoor climate, consuming as little energy as possible. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. The hot water is then drained through the water outlet or recycled.

• functions: cooling, heating, dehumidification (dehumidifier), circulation and air filtration.
• power consumption 400V: 3100W
• phases: 3
• cooling capacity: 15kW
• dehumidifies: 270l (per 24h)
• water consumption: 5-9l/min
• 3 x 2700W ceramic heaters
• dimensions: 121 x 70 x 54cm
• weight: 160kg
• warranty: 1 year

PRO3 comes with a remote (controller), which allows all processes to run fully automatically and be monitored simultaneously.

Why choose OPTICLIMATE?

This is ideal for cooling properties near water sources such as canal houses, floating homes, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings where an outdoor unit cannot be installed. If your house has a swimming pool, you can use the water-cooled OptiClimate to cool your house and heat the pool.

• PRO3 comes with a remote control (controller), which allows all processes to run fully automatically and be monitored simultaneously. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool, depending on the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dehumidifies the air. If necessary, using the included humidistat, OptiClimate can also dehumidify in the night setting, thereby reducing humidity.

• OptiClimate dehumidifies by continuously finding the right balance between heating and cooling. This allows the dehumidification function to continue operating even after the desired temperature is reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more efficient than a construction dehumidifier.

SAFE AND RELIABLE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. Opticlimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel housing.
3. Opticlimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*

OptiClimate 10000 PRO3, water-cooled air conditioner

OptiClimate​ 10000 PRO3 is a water-cooled air conditioner that cools the air using water and heats it with ceramic heaters. This is a standalone climate control system that perfectly controls the indoor climate, consuming as little energy as possible. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. The hot water is then discharged through the water outlet or recycled.

• functions for: cooling, heating, air drying (dehumidifier), circulation and air filtration.
• power consumption 230-400V: 2150W
• cooling capacity: 10kW 
• dehumidifies: 170L (per 24h)
• water consumption: 3-6L/min
• 3 x 2000W ceramic heaters
• dimensions: 115 x 56 x 50cm 
• weight: 120kg
• warranty: 1 year

Why choose OPTICLIMATE?

This is ideal for cooling properties near bodies of water, such as canal houses, floating houses, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings, too, where an outdoor unit cannot be installed. If your house has a swimming pool, you can use the water-cooled OptiClimate to cool your house and  heat the pool.

• The PRO3 comes with a remote control (controller) included, allowing all processes to run fully automatically while being monitored simultaneously. Once the minimum temperature (in night mode) and maximum temperature (in day mode) have been set using the remote control, OptiClimate will heat or cool, depending on the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dehumidifies the air. If necessary, using the included humidistat, OptiClimate can also dehumidify in night mode, thereby reducing humidity.

• OptiClimate dehumidifies by continuously finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate’s dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more efficient than a construction dehumidifier.

SAFE AND RELIABLE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example, when the water supply is restricted.
2. Opticlimate is fire-safe, as all electrical components, including the heating elements and connections, are installed in a steel housing.
3. Opticlimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*