Bluelab

Bluelab pH 7.0 buffer solution for calibrating a compatible pH meter.

Features and intended use

• Nominal value: pH 7.0.
• Packaging: 250 ml.
• Intended use: pH checking and calibration, according to the meter’s procedure.

Operation and compatibility

Pour a fresh portion into a clean container and wait for a stable reading. Follow the temperature chart on the label when applicable. Do not return a used portion to the bottle. The buffer is not intended for adjusting the pH of a reservoir.

Browse pH buffers and solutions.

Bluelab pH 7.0 buffer solution for calibrating a compatible pH meter.

Features and intended use

• Nominal value: pH 7.0.
• Package size: 18 ml.
• Intended use: checking and calibrating pH, according to the meter's procedure.

Operation and compatibility

Pour a fresh portion into a clean container and wait for a stable reading. Follow the temperature table on the label when applicable. Do not return the used portion to the bottle. The buffer is not a product for adjusting the pH of the reservoir.

Browse pH buffers and solutions.

Bluelab pH 4.0 buffer solution for calibrating a compatible pH meter.

Features and intended use

• Nominal value: pH 4.0.
• Package size: 250 ml.
• Intended use: checking and calibrating pH, according to the meter’s procedure.

Use and compatibility

Pour a fresh portion into a clean container and wait for a stable reading. Follow the temperature chart on the label, where applicable. Do not pour the used portion back into the bottle. The buffer is not a product for adjusting the pH of a reservoir.

Browse pH buffers and solutions.

Bluelab pH Pen measures the pH and temperature of a liquid solution.

Features and intended use

• pH range: 0.0 to 14.0.
• pH accuracy at 25°C: ±0.1.
• Two-point pH calibration.

Use and compatibility

Use the specified buffers and KCl storage solution. The standard pH Pen is not equivalent to the PenPlus with its replaceable module.

Store offer warranty

• 1-year warranty

Browse pH meters.

Bluelab conductivity standard, 2.77 mS/cm, for compatible EC meters.

Features and intended use

• Nominal EC value: 2.77 mS/cm.
• Package size: 250 ml.
• Used for checking or calibration when the specific meter supports this standard value.

Operation and compatibility

Follow the instructions for the selected model. Some EC meters are factory-calibrated, and the standard is used for checking after cleaning. Use a fresh portion without contaminating the remaining solution.

Browse EC standards and solutions.

Bluelab pH 4.0 buffer solution for calibrating a compatible pH meter.

Features and purpose

• Nominal value: pH 4.0.
• Package: 18 ml.
• Purpose: pH checking and calibration, according to the meter's procedure.

Use and compatibility

Pour a fresh portion into a clean container and wait for a stable reading. Follow the temperature chart on the label where applicable. Do not return the used portion to the bottle. The buffer is not a product for adjusting the pH of the reservoir.

Browse pH buffers and solutions.

Bluelab KCl is a storage solution for compatible pH electrodes.

Features and purpose

• Package size: 100 ml.
• Purpose: to keep the pH glass membrane and reference junction hydrated.

Operation and compatibility

After measuring, rinse the electrode and add the prescribed amount of solution to the protective cap. Do not use distilled, deionized, or reverse-osmosis water for long-term storage of a pH electrode. Refilling the electrode is permitted only with a refillable probe and an explicitly compatible electrolyte.

Browse electrode maintenance solutions.

The Bluelab Soil pH Pen is designed for pH measurements in soil, growing media, and solutions.

Features and intended use

• pH range: 0.0 to 14.0.
• pH accuracy at 25°C: ±0.1.
• Two-point pH calibration.

Use and compatibility

Prepare the sample according to the instructions and avoid putting mechanical stress on the glass tip. Keep the electrode hydrated.

Warranty under the store offer

• 1-year warranty

Browse soil pH meters.

Bluelab Probe Care Kit is a maintenance kit for pH and electrical conductivity probes.

Features and intended use

• Kit variant: pH and electrical conductivity.
• Cleaning and testing supplies according to the specific kit contents.

Operation and compatibility

Distinguish between pH calibration and EC testing. Follow the procedure for the specific probe and check the offer contents before ordering.

Browse maintenance kits and solutions.

Bluelab Probe Care Kit is a maintenance kit for pH measurement probes.

Features and intended use

• Kit type: pH.
• Cleaning and testing supplies, depending on the specific kit contents.

Operation and compatibility

Distinguish pH calibration from EC testing. Follow the procedure for the specific probe and check the offer contents before ordering.

Browse maintenance kits and solutions.

Bluelab Truncheon measures the electrical conductivity of nutrient solutions and displays the corresponding EC, CF, and ppm scales.

Features and purpose

• EC range: 0.2 to 3.6 mS/cm.
• Factory-calibrated, with no user calibration required.
• 500 ppm and 700 ppm scales.

Use and compatibility

Clean the measuring end and check it with Bluelab 2.77 mS/cm standard. Checking with a standard is different from adjusting the calibration. The EC reading does not measure the amount of each individual fertilizer.

Warranty under the store offer

• 5-year warranty

Browse EC meters.

Checking standard: Bluelab, EC Standard 2.77 mS/cm, 250 ml.

Bluelab Conductivity Pen measures EC and solution temperature.

Features and purpose

• EC range: 0.0 to 10.0 mS/cm.
• EC accuracy at 25°C: ±0.1 mS/cm.
• Single-point EC calibration.

Use and compatibility

Use the standard and procedure for the Conductivity Pen. The rule that Truncheon does not require user calibration does not apply to this model.

Warranty under the store offer

• 1-year warranty

Browse EC meters.

Bluelab OnePen is a portable meter for pH, EC and temperature with a Bluetooth connection to Edenic.

Features and intended use

• Replaceable combination probe.
• pH resolution: 0.01.
• EC and ppm 500/700 scales, depending on the selected mode.
• Connects to Edenic via Bluetooth.

Operation and compatibility

A resolution of 0.01 pH is not the same as an accuracy of ±0.01 pH. Mobile features require a compatible app and connection. OnePen is not a standalone Wi-Fi monitor or dosing system.

Browse combination meters.

Bluelab 2.77 mS/cm conductivity standard for compatible EC meters.

Features and intended use

• Nominal EC value: 2.77 mS/cm.
• Package size: 18 ml.
• Used for checking or calibration when the specific meter supports this standard value.

Use and compatibility

Follow the manual for the selected model. Some EC meters are factory-calibrated, and the standard is used for checking after cleaning. Use a fresh portion without contaminating the remaining solution.

Browse EC standards and solutions.

The Bluelab Probe Care Kit is a maintenance kit for electrical conductivity probes.

Features and intended use

• Kit variant: electrical conductivity.
• Cleaning and checking supplies, depending on the specific kit contents.

Use and compatibility

Distinguish pH calibration from EC checking. Follow the procedure for the specific probe and check the offer contents before ordering.

Browse maintenance kits and solutions.

Bluelab Pulse measures electrical conductivity, moisture, and temperature in compatible substrates.

Features and purpose

• Designed for root-zone measurements.
• Works with a compatible mobile app and Bluetooth connection.

Use and compatibility

Follow the substrate requirements and measurement method. Substrate EC and EC of an extracted or irrigation solution are not interchangeable unless the same method is used. Pulse does not measure pH. Check current app support for your phone.

Warranty under the store offer

• 1-year warranty

Browse substrate meters.

Bluelab KCl is a storage solution for compatible pH electrodes.

Features and Purpose

• Package: 250 ml.
• Purpose: keeps the pH glass membrane and reference junction hydrated.

Operation and Compatibility

After measuring, rinse the electrode and add the specified amount of solution to the protective cap. Do not use distilled, deionized, or reverse-osmosis water for long-term pH electrode storage. Refilling inside the electrode is permitted only for a refillable probe and with an explicitly compatible electrolyte.

Browse electrode maintenance solutions.

Bluelab pH ProbePlus is a replacement measuring probe.

Features and purpose

• Designed for: Bluelab pH PenPlus.
• pH and temperature module for PenPlus.

Operation and compatibility

Check the exact model and connection before ordering. After replacement, prepare, hydrate, and calibrate the probe according to the device manual. A matching connector alone does not guarantee compatibility.

Browse meters and replacement probes.

Compatible device: Bluelab pH PenPlus, pH tester with replaceable probe.

Bluelab KCl is a storage solution for compatible pH electrodes.

Features and purpose

• Package size: 18 ml.
• Purpose: Keeps the pH glass membrane and reference junction hydrated.

Use and compatibility

After measuring, rinse the electrode and place the specified amount of solution in the protective cap. Do not use distilled, deionized, or reverse osmosis water for long-term storage of a pH electrode. Refilling inside the electrode is permitted only for a refillable probe and with an explicitly compatible electrolyte.

Browse electrode maintenance solutions.

Bluelab pH Probe is a replacement measuring probe.

Features and purpose

• Designed for: compatible Bluelab pH devices, as specified in the manual.
• Replacement pH electrode, sold separately from the complete meter.

Operation and compatibility

Check the exact model and connection before ordering. After replacement, prepare, hydrate, and calibrate the probe according to the device manual. A matching connector alone does not guarantee compatibility.

Warranty under the store offer

• warranty: 6 months

Browse meters and replacement probes.

Bluelab Starter Pack is a kit for measuring pH and electrical conductivity in nutrient solution.

Features and intended use

• Combines pH and EC measuring tools, depending on the specific kit contents.

Operation and compatibility

Confirm which devices and solutions are included before ordering, as the name Starter Pack alone does not clearly specify the contents.

Warranty under the store offer

• 1-year warranty

Explore pH and EC kits.

Bluelab Guardian Monitor Wi-Fi displays pH, electrical conductivity, and temperature, and sends data to Edenic when the connection is configured.

Features and intended use

• Continuous solution monitoring.
• Wi-Fi connectivity and on-screen readings.
• Separate pH and conductivity/temperature probes.

Operation and compatibility

The monitor does not add reagents or replace a dosing controller. Maintain the pH probe according to the instructions and check EC measurements using an appropriate standard.

Warranty under the store offer

• 2-year warranty on the device.
• 6-month warranty on the Bluelab pH Probe.

Explore monitors and controllers.

Bluelab PeriPod M3 is a dosing module with 3 pumps for a compatible Bluelab Pro Controller.

Features and purpose

• Up to 120 ml/min for each pump, not for the module as a whole.
• Configuration for one pH regulator and two nutrient components.
• Requires a compatible controller and measurement probes.

Operation and compatibility

M3 and M4 can be combined according to the manual, but not with L3 in one configuration. Calibrate the actual flow rate for the solution used and set the ratios via the controller.

Browse controllers and meters.

Bluelab Multimedia pH Meter is a pH meter with a Leap probe for direct measurement in soil, growing media, and solutions.

Features and intended use

• Replaceable Bluelab Leap pH Probe.
• Two-point pH calibration.
• Indication when recalibration is needed.

Operation and compatibility

Prepare the soil or growing medium according to the manual and ensure suitable probe contact. The sampling method affects how comparable the results are.

Warranty under the store offer

• meter warranty: 5 years
• probe warranty: 6 months

Browse soil pH meters.

Bluelab Leap pH Probe is a replacement measuring probe.

Features and intended use

• Designed for: compatible pH meter, for direct measurement in soil, growing media, and solutions.
• Replacement pH electrode, sold separately from the complete meter.

Operation and compatibility

Check the exact model and connection before ordering. After replacement, prepare, hydrate, and calibrate according to the device manual. A matching connector alone does not guarantee compatibility.

Warranty under the store offer

• warranty: 6 months

Browse meters and replacement probes.

Bluelab OnePen Replacement Probe is a replacement measuring probe.

Features and purpose

• Designed for: Bluelab OnePen.
• Measures pH, EC, and temperature when used with OnePen.

Operation and compatibility

Check the exact model and connection before ordering. After replacement, prepare, hydrate, and calibrate the probe according to the device manual. A matching connector alone does not guarantee compatibility.

Browse meters and replacement probes.

Compatible device: Bluelab OnePen, pH, EC, and temperature meter.

Bluelab PeriPod M4 is a dosing module with 4 pumps for a compatible Bluelab Pro Controller.

Features and intended use

• Up to 120 ml/min per pump, not for the entire module combined.
• Configuration for one pH regulator and three nutrient components.
• Requires a compatible controller and measuring probes.

Operation and compatibility

M3 and M4 can be combined according to the manual, but not with L3 in the same configuration. Calibrate the actual flow rate for the solution being used and set the ratios through the controller.

Browse controllers and meters.

Bluelab pH Controller Wi-Fi monitors and controls pH with a built-in peristaltic pump.

Features and purpose

• Automatic dosing in the selected direction: raising or lowering pH.
• Built-in pump with a flow rate of up to 120 ml/min.
• Wi-Fi connection to Edenic.
• Replaceable pH and temperature probes.

Operation and compatibility

Observe the reagent's concentration limits and chemical compatibility. Set mixing intervals and safeguards against overdosing. The device is not a system for simultaneously dosing pH Up and pH Down using two separate pumps.

Warranty under the store offer

• warranties for the device and temperature probe: 2 years
• warranty for the Bluelab pH Probe: 6 months

Browse pH and EC meters and controllers.

Bluelab Connect Stick is a USB receiver for wireless communication with compatible Bluelab Connect devices.

Features and intended use

• Transmits data to the Connect Desktop software on a computer.
• To use Edenic with Connect devices, a working local computer with Connect Desktop and a connected Connect Stick are required.

Operation and compatibility

This is a communication receiver, not a USB flash drive for standalone data storage. Check device compatibility and the current software requirements.

Warranty under the store offer

• 2-year warranty

Explore Bluelab devices and accessories.

Bluelab Combo Meter measures pH, electrical conductivity, and solution temperature.

Features and intended use

• Separate measuring probes, depending on the kit contents.
• Two-point pH calibration.
• The EC probe is factory-calibrated and maintained through cleaning and checks.

Operation and compatibility

Use pH buffers for pH calibration and the specified EC standard for checking. Do not store the pH electrode according to the dry-storage requirements for an EC sensor.

Warranty under the store offer

• Device warranty: 5 years
• Probe warranty: 6 months

Explore combination meters.