OSRAM

Osram Plantastar 600W – HPS lamp

Osram Plantastar 600W is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• current: 6.06A
• luminous flux: 90,000 lm
• efficiency: 150 lm/W
• PPF: 1100 µmol/s
• efficiency: 1.8 µmol/s
• color temperature: 2000 K
• lifetime: 20,000 h
• socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (you can purchase them here*).

Detailed specifications:here*

Recommendations:

• Connect to the mains through a suitable ballast.
• Position at least 60 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To achieve maximum efficiency from sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Electric shock hazard - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and an appropriate device!
• Damaged lamps may emit hazardous radiation and can cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lights should be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp periodically switching on and off or significant changes in color or brightness - the lamp must be replaced immediately!

Osram Vialox NAV-T 600W – HPS lamp

Osram Vialox NAV-T (SON-T) 600W is a sodium / HPS bulb / lamp for the flowering phase.

• for flowering
• power: 600W
• amperage: 6.06A
• luminous flux: 90,000 lm
• efficacy: 150 lm/W
• color temperature: 2000 K
• lifespan: 20,000 h.
• socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (you can purchase them from here*).

Detailed specifications:here*

Recommendations:

• Connect to the mains via a suitable ballast.
• Position at least 60 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To get the maximum efficiency from sodium lamps, it is recommended not to use them for more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control equipment and a suitable device!
• Damaged lamps may emit hazardous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps must be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - indicated by the lamp switching on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!

Osram Vialox NAV-T 1000W - HPS lamp

Osram Vialox NAV-T (SON-T) 1000W is a sodium / HPS bulb / lamp for the flowering phase.

• for flowering
• power: 1000W
• amperage: 10.6A
• luminous flux: 130,000 lm
• efficiency: 130 lm/W
• color temperature: 2000 K
• lifespan: 8,000 h
• socket: E40

Note:to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (you can purchase them here*).

Detailed specifications:here*

Recommendations:

• Connects to the mains through a suitable ballast.
• Position at least 80 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To get the maximum performance from sodium lamps, it is recommended to use them for no more than one year.

Warning:

• Electric shock hazard - disconnect the power supply before installing, removing, or inspecting the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable, thermally protected control gear and a suitable fixture!
• Damaged lamps may emit hazardous radiation and can cause injury, poisoning, property damage, or fire!
• Damaged lamps must be replaced immediately with care and disposed of in accordance with local environmental regulations!
• Burn hazard - allow the lamp to cool first!
• Do not use excessive force when installing a lamp!
• Lamps should be switched off and allowed to cool at least once a week!
• At the end of the lamp's life - characterized by the lamp switching on and off intermittently or significant changes in color or brightness - the lamp must be replaced immediately!