Mini greenhouses, propagators, and seedling heat mats

ROOT!T Value – 24-cell tray kit

ROOT!T VALUE Rooting Sponge Propagation Kit is a complete kit for germinating seeds or rooting cuttings. The kit contains:

• propagator with a humidity control vent
• 24-cell tray
• 24 pcs. rooting sponges
• 15 ml sample of initial feed
• 15 ml sample of rooting gel
• instructions in English for optimal results
• dimensions L/W/H: 38 x 24 x 18.5 cm

ROOT!T – 60-cell seedling tray

ROOT!T Propagator Tray Insert is a 60-cell tray for rooting sponges, suitable for use in the ROOT!T propagator.

• 60 cells
• dimensions: 52x32x5cm

Jiffy-7 – tray with 84 cells for 33 mm

Tray for JIFFY
84 cells

Tray specifically for Jiffy-7C 33mm blocks.

Size 52x32cm.

Jiffy-7 trays are designed to hold the blocks securely while allowing free air circulation, helping prevent disease and promote root development.

Jiffy-7 – tray with 60 cells for 41 mm plugs

tray for JIFFY
60 cells

Tray specifically for Jiffy-7C 41 mm blocks.

Size 52x32 cm.

Jiffy-7 trays are designed to hold the blocks securely while allowing air to circulate freely, helping prevent disease and promoting root development.

ROOT!T – propagator tray 57×37 cm

ROOTiT Propagator Tray is a tray / base for the ROOT!T propagator.

• equipped with longitudinal channels to prevent overwatering
• dimensions: 57x37x5.5cm.

ROOT!T – heat mat thermostat

ROOT!T Thermostat for Heat Mat is an electronic device that gives you full control over the temperature in the root zone during germination / rooting. By switching the heating mats on and off, the device maintains the set desired temperature precisely (10-30ºC). Compatible with all ROOT!T heating mats.

• Maintain the optimal temperatures for your plants!
• Easy to switch on!
• Easy to use and control!
• sensor cable length: 1.8m.
• max. load: 1000W / 4.3A

Preparing for operation:

1. Place the temperature sensor in the propagator or the area to be heated. It can be hung using the rubber suction cup or placed in the substrate (photo 3).
2. Place the thermostat outside the propagator or growing area - the thermostat and output socket must always be kept in a dry place! DO NOT IMMERSE IN WATER OR LIQUIDS!
3. Plug the heating mat or other heater into the output socket.
4. Connect the thermostat to the power supply - the POWER indicator should light up.
5. Continue to set the desired temperature to maintain.

Setting the thermostat:

The display shows the current temperature at the sensor. Press UP to display degrees Fahrenheit ºF or DOWN to display Celsius ºC - the corresponding indicator will light up.

1. Press the SET button to display the desired temperature; after 3 seconds, it will return to the current temperature.
2. Press and hold the SET button for 3 seconds; the display will start flashing - press UP or DOWN to select the desired temperature to maintain.
3. Press SET again to return to displaying the current temperature. Leave it, and it will return to displaying the current temperature after 30 seconds.

The HEATING indicator will light up if the current temperature is lower than the desired temperature - the heating mat / heater is now operating ON. The HEATING indicator will not light up if the current temperature is higher than the desired temperature - the heating mat / heater is not operating now OFF.

Glass House Propagator 64 – mini greenhouse

Glass House Propagator 64 is a propagator made of high-quality rigid plastic, suitable for germination, small plants or cuttings.

• size: 59x39x24cm.
• sturdy, durable and waterproof polypropylene tray
• transparent, impact-resistant polystyrene lid for maximum light transmission
• sliding ventilation vents for easy humidity control

VDL propagator 59×39×21 cm – for seedlingsPropagator 39 x 59 x 21 cm Vdl is a high-quality, reusable seedling container that provides perfect protection and optimal conditions for the development of young plants and seeds. This propagator measures 39 cm x 59 cm x 21 cm, making it ideal for home use or small gardens. It is designed with a transparent lid for maximum visibility and monitoring of plant growth, while allowing plenty of light to reach the seeds or young plants. The lid of the Vdl propagator is equipped with ventilation openings that allow humidity and temperature inside the container to be adjusted, providing temperature control and the proper air circulation necessary for healthy plant growth. With the Propagator 39 x 59 x 21 cm Vdl, you can improve your chances of successful propagation by providing your seeds and young plants with the optimal growing conditions they need.

ROOT!T 40×60 cm - heating mat

ROOT!T Medium Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is key to success in the early stages, when young plants are at their most delicate and vulnerable. 

• Dimensions W/D: 40x60cm.
• Speeds up seed germination or clone rooting by whole days.
• Warms the root zone by 5.5-11˚C above the ambient temperature.
• Fully waterproof, scratch-resistant, and durable.
• To set your desired precise temperature, use together with the ROOT!T thermostat for heating mats.

Instructions for use:

1. Place the heating mat on a thoroughly dried surface.
2. For best results, place the mat on an insulated surface, not directly on a cold floor.
3. Place the tray with seedlings (seeds, clones) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the mains (220-240V).
5. This heating mat is designed to warm the root zone by 5.5-11˚C above the ambient temperature.

Caution:

• Improper use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly in the tray / propagator, and do not cover it with soil or other growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

Propagator Pro 70 – mini greenhouse for seedlings

Propagator Pro 70 seedling growing kit is sturdy and durable. It is easy to ventilate using the ventilation vents in the lid. The walls and lid are slightly angled so that condensed water runs to the sides rather than onto the plants.

• Dimensions: 58cm long, 38cm wide, 24cm high
• The kit includes: a waterproof tray and lid
• The lid is equipped with adjustable ventilation vents
• Made from hard, dense plastic - does not bend
• Material: polypropylene PP (tray) and polystyrene PS (lid)

The propagator is sold without a tray with sowing cells (insert). Suitable options include:

Eazy Plug CT150  and Eazy Plug CT77

Cultilene rockwool cubes - tray of 77

Jiffys-7 - 41mm tray with 60 cells

You can also place small pots inside: Soft seedling pot 7x7x8cm

Neptune Hydroponics – electric propagator

The Neptune Hydroponics heated propagator is a high-quality propagator with a 12V heating mat. With it, you can germinate flowers, vegetables, or aromatic herbs during the winter months, allowing their seeds to develop at an ideal temperature and be ready for transplanting in early spring.

• dimensions: 38 x 25 x 19cm.

Garland Micro Greens – tray without holes 56×28 cm

Garland Micro Greens Reservoir Tray Without Holes is the ideal tray for growing microgreens. Use in combination with the Garland Micro Greens Growing Tray With Holes for microgreens. Used together, the two trays provide optimal watering and drainage for your microgreens. The tray can also be used as a “blackout” tray when turned upside down and placed over the microgreens growing tray, thereby speeding up the seed germination process in the first few days after planting.

• material: injection-molded plasticfree of Bisphenol A (BPA)
• sturdy and durable plastic allows repeated use for years
• 100% recyclable
• dimensions: 56 x 28 x 3 cm

ROOT!T – propagator lid 57×37 cm

ROOTiT Propagator Lid is a lid for the ROOT!T propagator.

• two vents for humidity control
• dimensions: 57x37x15.5cm.

ROOT!T 40×120 cm – heat mat

ROOT!T Large Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is a key factor for success in the early stages, when young plants are at their most delicate and vulnerable. 

• Dimensions W/L: 40x120cm.
• Speeds up seed germination or cloning rooting by whole days.
• Warms the root zone by 5.5-11˚C above the ambient temperature.
• Fully waterproof, scratch-resistant and durable.
• To set your desired precise temperature, use together with the ROOT!T thermostat for heat mats.

Instructions for use:

1. Place the heating mat on a thoroughly dry surface.
2. For best results, place the mat on an insulated surface rather than directly on a cold floor.
3. Place the tray of seedlings (seeds, clones) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the power supply (220-240V).
5. This heating mat is designed to warm the root zone by 5.5-11˚C above the ambient temperature.

Warning:

• Improper use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly inside the tray / propagator or cover it with soil or other growing medium!
• Do not cover the mat with heat-insulating materials, as this may cause overheating!
• Do not immerse in water!

Plagron SeedBox, germination kit with 12 plugs

Plagron SeedBox is a germination kit with a tray, transparent lid, 12 plugs, and 250 ml of Seedbooster. It is suitable for getting your growing operation off to an organized start in a small propagator.

Preparing the kit

For the current version with a 250 ml bottle, the manufacturer recommends mixing half a bottle of Seedbooster, 125 ml, with 125 ml of water. Distribute evenly over the plugs and follow the included guide. Check the kit version before preparing it.

Germination and transplanting

Place the seeds according to the instructions, maintain suitable conditions, and provide ventilation as the seedlings develop. Transplant when roots emerge from the plugs. Success also depends on seed quality and the growing environment.

Ongoing care

For foliar application to young plants, see Vita Start.

Browse all Plagron fertilizers and supplements. Manufacturer's guide.

Garland Professional Seed Tray – with holes, 37×23.5 cm

Grow healthy plants from seeds at home or in your greenhouse with the Garland Professional Seed Tray for germinating seeds and seedlings. Grow like the professionals!

• for seed germination, growing microgreens or rooting seedlings
• drainage holes, reducing the risk of overwatering
• practical, space-saving size 
• made from recycled plastic
• 100% recyclable

Dimensions: 37 x 23.5 x 6 cm

Garland Micro Greens – tray with holes, 56×28 cm

Garland Micro Greens Growing Tray With Holes is the ideal tray for growing microgreens. Use it together with the Garland Micro Greens Reservoir Tray Without Holes. Used together, the two trays provide optimal watering and drainage for your microgreens.

• material: injection-molded plasticBPA-free (BPA)
• sturdy and durable plastic allows for repeated use for years
• 100% recyclable
• dimensions: 56 x 28 x 3 cm

ROOT!T 25×35 cm – heating mat

ROOT!T Small Heat Mat is a heating mat that evenly warms the root zone, improving germination and rooting. Maintaining a constant temperature is key to success in the early stages, when young plants are at their most fragile and vulnerable.

• Dimensions W/L: 25x35cm.
• Speeds up seed germination or rooting of cuttings by whole days.
• Warms the root zone to 5.5-11˚C above the ambient temperature.
• Completely waterproof, scratch-resistant, long-lasting.
• To set your desired precise temperature, use it together with the ROOT!T heating mat thermostat.

Instructions for use:

1. Place the heating mat on a thoroughly dried surface.
2. For best results, place the mat on an insulated surface, not directly on a cold floor.
3. Place the tray with seedlings (seeds, cuttings) on the mat. Cover it with a propagator lid - this will keep the root zone warm and maintain humidity for better rooting.
4. Connect to the power supply (220-240V).
5. This heating mat is designed to warm the root zone to 5.5-11˚C above the ambient temperature.

Caution:

• Incorrect use may result in fire or electric shock!
• Make sure there are no sharp objects on the surface beneath the heating mat that could puncture it! Do not place the mat directly in the tray/propagator or cover it with soil or other growing media!
• Do not cover the mat with insulating materials, as this may cause overheating!
• Do not immerse in water!

Garland Professional Gravel Tray – без отвори

Grow healthy plants from seed at home or in your greenhouse with the Garland Professional Gravel tray for germinating seeds and growing seedlings. Grow like the professionals!

• for seed germination, growing microgreens or rooting seedlings
• practical, space-saving size 
• made from recycled plastic
• 100% recyclable

Dimensions: 37 x 23.5 х 6 cm

Germination Kit, 40 Cells – 2 LED Strips

Seed germination kit and cutting propagation kit with built-in LED lighting. The system provides a suitable environment for early plant development, supporting reliable germination and a healthy start for seedlings. Suitable for home growing, greenhouses, or use during seasons with less natural light.

Capacity:40 individual cells for seeds or cuttings, allowing a large number of plants to germinate at the same time.

Lighting: equipped with 2 cool-white LED strips, providing supplemental light for better development of young plants.

Dimensions:38 × 24 × 12 cm — compact size, suitable for placing on a table, shelf, or work surface.

Construction: includes a tray and seedling cells, making it easier to organize germination and care for plants.

Purpose: suitable for germinating vegetables, herbs, flowers, and other plants, as well as propagating cuttings.

Garland 38×24×18 cm – mini greenhouse

🔹 Garland Small High Dome Propagator is a compact and effective tool for growing seedlings and cuttings. Measuring 38 x 24 x 18 cm, it is ideal for a windowsill, providing optimal conditions for germination and growth. The clear lid with an adjustable ventilation opening makes it easy to control humidity, while the tray's special design ensures effective drainage.

🔹 Detailedspecifications:

• Dimensions: 38 x 24 x 18 cm
• Materials: Durable plastics suitable for repeated use
• Lid: Clear with an adjustable ventilation opening
• Tray: Designed for effective drainage and to prevent water from collecting
• Color: Green with a clear lid
• Manufacturer: Garland Products

🔹 Recommendationsandinstructionsforuse:

1. Put a suitable potting mix or substrate in the tray.
2. Plant the seeds or cuttings in the prepared mix.
3. Place the lid on the tray and adjust the ventilation opening to provide optimal germination conditions.
4. Place the propagator in a warm, bright spot, such as a windowsill.
5. Check the humidity regularly and water as needed.

✅ Benefitsofuse:

• Idealsize: Its compact size makes it suitable for any space.
• Humiditycontrol: The adjustable ventilation opening makes it easy to control humidity.
• Effectivedrainage: The tray's special design prevents excess water from collecting.
• Reusable: Durable materials ensure long-lasting use.

VDL 30W 55×35 cm – heating mat

🔹  30W VDL Heating Mat - measuring  55x35 cm. is an electric heating mat designed to maintain optimal temperature conditions for seed germination, rooting cuttings, and growing sensitive plants. It provides precise temperature control, which is especially useful in cold conditions.

🔹 Detailed specifications:

• Dimensions: 55x35 cm
• Power: 30 W
• Material: Flexible, moisture-resistant PVC surface
• Application: Suitable for use under pots, in nurseries, or in greenhouses
• Manufacturer: VDL

🔹 Recommendations and instructions for use:

1. Place the mat on a flat, dry surface.
2. Place the pot or container with plants on the mat.
3. Connect the heating mat to the power supply.
4. Check the soil moisture periodically and water as needed.

✅ Benefits of use:

• Improved germination: Provides warmth that speeds up seed germination.
• Healthy growth: Promotes rooting in cuttings and growth in young plants.
• Economical: Low energy consumption (30 W).
• Versatility: Suitable for various plant types and growing conditions.

Garland black tray 37×23.5×6 cm – no holes

The medium Garland garden tray without drainage holes is suitable for germinating seeds or rooting seedlings. It is made from recycled plastic.

• dimensions L/W/H: 37.5 x 23 x 6 cm
• material: rigid plastic
• color: black
• 100% recyclable

The tray is suitable for use with the EP 42 propagator cover (sold separately).

Flexible tray 31×51×4 cm – for microgreens

Flexible tray for germinating seeds, growing microgreens, and rooting seedlings.

• suitable for: seeds, microgreens and seedlings
• material: soft plastic
• dimensions: 31 x 51 x 4 cm

Mammoth Propagator 90 Propagator

Mammoth Propagator 90 is a medium-sized propagator that provides excellent conditions for planting or cloning plants in an area of 0.54m². This budget-friendly mini propagator is suitable for both hobbyists and more experienced gardeners.

• ideal for seeds and cuttings / clones
• dimensions: 90 x 60 x 60cm
• steel poles: ⌀ 16mm
• reflective foil: Mylar Silver 190D
• ventilation port: ⌀ 150mm
• easy and quick assembly

Advantages: 

• completely opaque single-layer cover, easy to clean
• Mylar Silver 190D reflective silver foil with a reflectivity of ~ 90%
• sturdy corners and connectors made of rigid PP polymer
• metal tubes with a diameter of 16mm and a thickness of 0.4mm are made of lightweight steel
• ventilation and wiring ports
• removable floor tray
• easy and quick assembly

Technical specifications:

• dimensions: 90 x 60 x 60cm
• growing area: 0.54m²
• access opening: front door
• side port: 2 pcs.
• ventilation port: ⌀ 150mm
• wiring port: ⌀ 76mm