PLANT!T

Vermiculite 1 L - Bulk

Vermiculite 1 L is a natural, soft and porous material obtained by expanding mica. It has a high cation exchange capacity, which helps gradually release nutrients such as potassium, calcium, magnesium, iron, silicon and other micronutrients.

• Holds up to 4 times more water while protecting roots from rotting.
• Absorbs excess fertilizers and additives, then releases them gradually.
• Improves soil aeration and drainage properties.
• Perlite "loves" air, while vermiculite loves water.
• Suitable for seedling substrates.

The PLANTiT Water Timer is designed to connect to a tap, but can also be used for gravity-fed irrigation from a barrel or tank. The timer is programmed in just 2 easy steps - turn the Run Time dial to set your desired watering duration, and the Frequency dial to set the desired interval between waterings. Then connect it to the irrigation outlet pipe and the timer will take care of the rest.

• Designed to connect to a tap
• The protective cover makes it fully waterproof
• Powered by two 1.5V AAA batteries (not included), which can last a whole season without needing replacement
• Automatic shut-off valve for when the battery runs out, and a program delay button for when you need to maintain your plants and don't want to water them
• Supplied with a set of fittings and a built-in filter

Technical specifications:

• Operating pressure range: 0-150 PSI (0-10 BAR)
• Connection: ¾ male / female connector / hose connector
• Frequency: choose to irrigate every 1, 2, 3, 4, 6, 8, 12, 24, 48 or 72 hours, or once a week
• Run time (watering): 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes

Before setting the watering schedule

Take the inlet pressure, water source and watering duration into account. Check the flow rate with a test cycle.

Browse irrigation timers and ready-made irrigation systems.

Hydroponic net pot Ø 140 mm

This 140mm-diameter hydroponic basket is the perfect foundation for any hydroponic grow. Specially designed to support healthy plant growth, it provides the root system with optimal access to water, air, and nutrients. The basket is made of durable plastic that resists corrosion and can withstand the moist conditions typical of hydroponic systems. Its open mesh structure allows plant roots to grow through freely and absorb the nutrients they need from the surrounding water. Product features: Diameter: 140mm Material: Durable plastic Intended use: Hydroponic systems Whether you are new to hydroponics or an experienced grower, this basket is an essential part of your system. It will help you maximize plant growth and productivity while minimizing potential root system problems.

Choosing a net pot

Check the diameter of the opening in the lid and the basket's support rim. Choose a growing medium that stays in the basket, leaving room for root development.

Browse hydroponic baskets.

Hydroponic net pot Ø 80 mm

"Heavy Duty Net Pot" is specially designed for hydroponic systems and is a highly load-resistant basket with a diameter of 80mm. This high-quality hydroponic basket is ideal for growing plants in water, allowing maximum access to water and nutrients. The basket is made of durable material that can withstand demanding growing conditions while also ensuring optimal root aeration. Its mesh structure allows plant roots to spread freely and absorb the nutrients they need from the water. Product features: Diameter: 80mm Material: Load-resistant plastic Intended use: Hydroponic systems

Choosing a net pot

Check the diameter of the opening in the lid and the basket's support rim. Choose a growing medium that stays in the basket, leaving room for root development.

Browse hydroponic baskets.

3/4-inch faucet adapter to 13 mm hose.

Product details3/4" faucet-to-hose adapter - 13 mm

Choosing the right fitting

Check the nominal size and connection type on each side. For reducing fittings, the two sizes refer to different connections, not a compatibility range.

Browse micro-irrigation fittings.

PLANT!T Bucket Lid – lid for DWC bucket

PLANT!Т Bucket Lid 20L bucket lid is great for use in DIY hydroponic systems, as the pre-marked circles make it easy to cut the right size for your net pot.

• The built-in handles on the bucket lid provide a good grip and make it easy to carry when placed on the PLANT!T 20L bucket

Choosing a basket

Check the diameter of the lid opening and the basket's support rim. Choose a substrate that stays in the basket while leaving room for root growth.

Browse hydroponic baskets.

PLANT!T Bucket 20 L - DWC Bucket

The PLANT!T Bucket 20 L has a range of different uses, including:

• as storage when used with the PLANT!T Bucket Lid
• DWC hydroponic systems with lids featuring net pots
• DIY hydroponic systems (thanks to the flat surface of both)

The built-in handles make it easy to stack multiple buckets.

Choosing a Basket

Check the diameter of the opening in the lid and the basket's support rim. Choose a growing medium that stays in the basket while leaving room for the roots to develop.

Browse hydroponic baskets.

19 mm hose elbow.

The elbow changes the direction of the line and reduces the need to bend the hose.

Choosing the right connection

Check the nominal size and connection type on each side. For reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

PLANTIT 25 mm hose outlet.

Product details

PLANTiT 25 mm hose outlet. The outlet for a tank / bucket is designed for a range of water distribution applications in hydroponic growing.

• for hose: ⌀ 25 mm or 1 inch

Choosing the right connector

Check the nominal size and connection type on each side. With reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

Hose end plug for 19 mm hose.

The plug closes the end of a compatible line. Check the seal by running a test supply of water.

Choosing the right fitting

Check the nominal size and connection type on each side. On reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

Hydroponic Net Pot Ø 200 mm

"Heavy Duty Net Pot" is designed specifically for hydroponic systems and is a highly load-resistant basket with a diameter of 200mm. This quality hydroponic basket is ideal for growing plants in water, allowing maximum access to water and nutrients. The basket is made of durable material that can withstand demanding growing conditions while providing optimal root ventilation. Its mesh structure allows plant roots to spread freely and absorb the nutrients they need from the water. Product features: Diameter: 80mm Material: Load-resistant plastic Intended use: Hydroponic systems Heavy Duty Net Pot makes a significant contribution to the efficiency of your hydroponic project. Designed for long-term use, it will withstand the demanding conditions of hydroponic environments while supporting the health and growth of your plants.

Choosing a basket

Check the diameter of the opening in the lid and the basket’s support rim. Choose a substrate that stays in the basket while leaving room for the roots to grow.

Browse hydroponic baskets.

PLANTIT 13 mm hose outlet.

Product details

PLANTiT 13 mm hose outlet. The tank/bucket outlet is designed for a range of water-distribution applications in hydroponic growing.

• for hose: ⌀ 13 mm or 1/2 inch

Setting up irrigation

Match the flow rate to the number of pots, pressure, and watering duration. Filtration and periodic flushing help limit clogging of the small outlets.

Browse drippers and distributors.

19 mm hose shut-off valve.

The valve allows you to manually stop the flow to the relevant branch of the line.

Choosing the right connection

Check the nominal size and connection type on each side. With reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

Tank sealing ring, 25 mm.

Product details25mm Tank or Bucket Sealing Ring

Choosing the right connection

Check the nominal size and connection type on each side. For reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

PLANTIT 19 mm hose outlet

Product details

PLANTiT 19 mm hose outlet. The reservoir / bucket outlet is designed for a range of water distribution applications in hydroponic growing.

• for hose: ⌀ 19 mm or 3/4 inch

Choosing the right connection

Check the nominal size and connection type on each side. For reducing fittings, the two sizes indicate different connections, not a compatibility range.

Explore micro-irrigation fittings.

19 mm hose tee.

The tee fitting connects three sections of the line and allows you to create a branch.

Choosing the right connection

Check the nominal size and connection type on each side. For reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

Inline irrigation filter, 19 mm.

Choosing the right connection

Check the nominal size and connection type on each side. For reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

25 mm hose connector with 1-inch BSP male thread.

Choosing the right connection

Check the nominal size and connection type on each side. For reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

Reducing hose connector, 25 to 19 mm.

Choosing the right connection

Check the nominal size and connection type on each side. For reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

PLANT!T DIY Level Indicator – water level indicator

The PLANTIT DIY Level Indicator Kit is an innovative level indicator specially designed for gardeners who want precise control over the liquid level in their tanks, containers, or hydroponic systems. This kit allows you to monitor the level of water or other liquids with great precision, without having to open or dismantle the entire system. Product features: Versatile: Compatible with different types of tanks and containers, as well as most hydroponic systems. Easy to install: Includes all the necessary parts and instructions for quick and easy installation, with no special tools or skills required. Accurate indicator: Quickly and easily check the liquid level in the tank without having to inspect it physically. Quality materials: Made from high-quality, durable materials to ensure long-lasting use. The PLANTIT DIY Level Indicator Kit is ideal for any serious gardener who wants to maintain optimal conditions for their plants. This water level indicator will save you time and effort by helping you maintain the perfect liquid level in your tank or container.

Choosing a basket

Check the diameter of the opening in the lid and the basket’s support rim. Choose a substrate that stays in the basket while leaving room for root development.

Browse hydroponic baskets.

180° micro sprinkler, green base, 54 L/h.

Product details180 degrees Micro Spray Green Base (54L/h)

Setting up irrigation

Match the flow rate to the number of pots, pressure, and watering duration. Filtration and periodic flushing help prevent small openings from clogging.

Browse drippers and distributors.

19 mm straight connector.

Choosing the right fitting

Check the nominal size and connection type on each side. For reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro irrigation fittings.

25 mm hose elbow.

The elbow changes the direction of the line and reduces the need to bend the hose.

Choosing the right connection

Check the nominal size and connection type on each side. On reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

Reducing tee for 25 mm to 19 mm hose.

The tee fitting connects three sections of the line and allows you to create a branch.

Choosing the right connection

Check the nominal size and connection type on each side. With reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.

PLANT!T BigFloat – top-up float valve

PLANTIT BigFloat Auto Top-up Kit is an automatic refill kit designed to make it easier to manage the water balance in your garden, hydroponic system or aquarium. This product is designed to make it easier to maintain a stable water level by automatically adding water when the level falls below a set point. Automatic refill: The system automatically adds water when the level falls below the set point, reducing the need for manual checks and refills. Easy to install: The kit includes all the necessary parts and installation instructions, making installation quick and easy, even for beginners. High-quality materials: Made from durable, corrosion-resistant materials that ensure long-lasting performance. Suitable for use in all types of containers and reservoirs, including aquariums, hydroponic systems and garden ponds. With the PLANTIT BigFloat Auto Top-up Kit, you can enjoy your garden or aquarium without worrying about maintaining the correct water level. This product saves you time and effort by automating one of the most demanding tasks in caring for water features.

Choosing a basket

Check the diameter of the opening in the lid and the basket’s support rim. Choose a substrate that stays in the basket, leaving room for the roots to develop.

Browse hydroponic baskets.

Vermiculite 100 L - Full bag

Vermiculite 100 L is a natural, soft and porous material produced by expanding mica. It has a high cation exchange capacity, which helps it gradually release nutrients such as potassium, calcium, magnesium, iron, silicon, and other micronutrients.

• Holds up to 4 times more water while protecting roots from rotting.
• Absorbs excess fertilizers and additives, then releases them gradually.
• Improves soil aeration and drainage.
• Perlite "loves" air, while vermiculite loves water.
• Suitable for seedling substrates.

19 mm LDPE irrigation pipe, 50 m roll.

Dimensions and connections

Match the inner and outer diameters to the connector type. Check whether the length is sold by the meter or as a full roll, and cut the end straight before connecting.

Browse hoses and pipes.

PLANT!T AEROS is an easy-to-use Deep Water Culture (DWC) hydroponic system, also known as a “bubble bucket.” With a minimal amount of growing medium and intensive aeration, this pot ensures fast growth and healthy plants. Key technical specifications:

• System type: DWC (Deep Water Culture)
• Reservoir capacity: 15L (effective capacity: 12L)
• Dimensions: 303 mm wide, 357 mm deep, 353 mm high
• Air pump and water pump included

Fast growth, healthy roots, and easy operation with PLANT!T AEROS!

PLANT!T AEROS is an extremely popular and easy-to-use hydroponic growing kit based on the Deep Water Culture (DWC) method, also known as a “bubble bucket.” The system uses a minimal amount of growing medium (such as clay pebbles), while providing more nutrients through aeration of the solution.

How does the system work?

The plant is placed in a hydroponic pot filled with growing medium (usually expanded clay pebbles), and its roots are submerged in nutrient solution. Thanks to the air pump and air stones at the bottom of the reservoir, the solution is continuously aerated. This keeps the plant roots in constant contact with nutrients and oxygen, significantly accelerating growth. Aeration also keeps the roots healthy and provides them with continuous, gentle movement.

Nutrient solution monitoring:

For optimal results, we recommend regularly monitoring the solution’s pH and EC levels. This is easy to do: simply remove the lid and test the solution.

High-quality components:

All PLANT!T AEROS components are made from high-quality materials and are fully compatible, ensuring long-lasting, reliable operation.

The kit includes:

• Main reservoir with a transparent section for monitoring the water level
• Lid for the main reservoir
• Inspection port cap
• Nutrient solution distribution kit
• Dual-outlet air pump
• Silicone air hose (1 m)
• Hydroponic mesh pot
• Water pump and other additional components for maximum convenience

Selection and maintenance

Choose the model according to the number of plants, the required area, and how the solution is delivered. Monitor the level, pH, and EC according to the crop and the instructions for the specific system.

Browse Terra Aquatica hydroponic systems.

25 mm tap-to-hose adapter.

Choosing the right connection

Check the nominal size and connection type on each side. For reducing fittings, the two sizes indicate different connections, not a compatibility range.

Browse micro-irrigation fittings.