BOYU

BOYU FP-1500 Submersible Water Pump 1500 L/h is suitable for all hydroponic systems and applications that require nutrient solution to be pumped. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Thanks to its smart design, the pump is easy to disassemble and clean.

• voltage: 230V, 50/60Hz
• power: 25W
• max. head: 2.5m
• max. flow rate: 1500 L/h
• outlet diameter: ⌀ 13mm
• dimensions: 104 x 93 x 140mm

Choosing a Water Pump

Choose a flow rate that suits the required head, hose length and resistance from the fittings. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-750 submersible water pump 750 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its intelligent design.

• voltage: 230V, 50/60Hz
• power: 12W
• max. head height: 1.5m
• max. flow rate: 750 L/h
• outlet diameter: ⌀ 13mm
• dimensions: 224 x 139 x 144mm

Choosing a water pump

Match the flow rate to the required head, hose length and resistance from the fittings. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-1000 submersible water pump 1000L/h is suitable for all hydroponic systems and those requiring nutrient solution pumping. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. The intelligent design makes it easy to disassemble and clean.

• voltage: 230V, 50/60Hz
• power: 16W
• max. head height: 1.8m
• max. flow rate: 1000L/h
• outlet diameter: ⌀ 15mm
• dimensions: 89 x 70 x 111mm

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate does not apply at the maximum head.

Browse water pumps.

BOYU FP-150 submersible water pump 150 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its clever design.

• voltage: 230V, 50/60Hz
• power: 2.5W
• max. head height: 0.6 m
• max. flow rate: 150 L/h
• outlet diameter: ⌀ 11 mm
• dimensions: 50 x 43 x 48 mm

Choosing a water pump

Choose a flow rate that suits the required head, hose length and resistance from the fittings. The stated maximum flow rate cannot be achieved at the same time as the maximum head.

Browse water pumps.

BOYU FP-100 submersible water pump 120l/h is suitable for all hydroponic systems and systems that require nutrient solutions to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof, and sealed. Disassembly and cleaning are easy thanks to its smart design.

• voltage: 230V, 50/60Hz
• power: 1.5W
• max. water head: 0.3m
• max. flow rate: 120l/h
• outlet diameter: ⌀ 8mm
• product dimensions: 40 x 36 x 42mm

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

The BOYU SES-10 air pump is specifically designed for quiet operation. It has an aluminum motor housing, effective heat dissipation, and a long service life. It features high flow and high air pressure.

• voltage: 230V, 50/60Hz
• power: 10W
• pressure: > 0.02Mpa
• flow rate: 10 l/min / 600 l/h
• outlet diameter: ⌀ 8 mm
• dimensions: 187 x 107 x 114 mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve as instructed to prevent water from flowing back.

Browse air pumps.

BOYU FP-350 submersible water pump 350 l/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof, and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 6W
• max. head height: 0.8 m
• max. flow rate: 350 l/h
• outlet diameter: ⌀ 13 mm
• dimensions: 69x54x82 mm

Choosing a water pump

Match the flow rate to the required head, hose length, and fitting resistance. The specified maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

BOYU FP-3000 3000 L/h submersible water pump is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is corrosion-resistant, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 68W
• max. head: 3.5 m
• max. flow rate: 3000 L/h
• outlet diameter: ⌀ 19 mm
• dimensions: 132 x 106 x 172 mm

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate is not the flow rate at maximum head.

Browse water pumps.

Using an air pump

The air stone operates with an external air source. Match its size and resistance to the air pump, and check for blockages if the bubbles become less frequent.

Browse air stones.

Ceramic aeration stone Ø 125 mm.

Product details

Aeration stones are an ideal solution for increasing the oxygen concentration in water.

Simply connect it to your air pump. 

Stone size: Ø125 mm

Using an air pump

The aeration element works with an external air source. Match its size and resistance to the air pump, and check for clogging if the bubbles decrease.

Browse aeration stones.

The BOYU hydroponic air stone is an essential accessory for your soil-free growing system.

Use with an air pump

The aeration component works with an external air source. Match its size and resistance to the air pump, and check for blockages if the bubbles become fewer.

Browse air stones.

BOYU FP-2000 submersible water pump 2000 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the intelligent design.

• voltage: 230V, 50/60Hz
• power: 43W
• max. head: 3.0m
• max. flow rate: 2000 L/h
• outlet diameter: ⌀ 19mm
• dimensions: 118 x 101 x 158mm

Choosing a water pump

Match the flow rate to the required head, hose length and resistance from the fittings. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

Ø 100 mm ceramic airstone.

Product details

Airstones are an ideal solution for increasing the oxygen concentration in water.

Simply connect it to your air pump. 

Stone size: Ø 100 mm

Using an air pump

The aeration element works with an external air source. Match its size and resistance to the air pump, and check for clogging if the bubbles decrease.

Browse airstones.

The air pump BOYU S-1000 is made of high-polymer composite rubber for longer service life and reliability. It features low operating noise, high air capacity and requires no oil lubrication. It also has electronic control of the intake ratio for high efficiency and low power consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.014Mpa
• flow rate: 4.2L/min / 252L/h
• outlet diameter: ⌀ 4mm
• weight: 0.5kg
• dimensions: 138 x 80 x 59mm

Connection and aeration

Choose an air hose and diffuser to suit the pump outlets. Place the pump above the water level or use a suitable check valve as directed to limit water backflow.

Browse air pumps.

The air pump BOYU S-2000 is made from high-polymer composite rubber for a longer service life and reliability. It features low operating noise, high air capacity, and requires no oil lubrication. It also has electronic control of the input ratio for high efficiency and low power consumption.

• voltage: 230V, 50/60Hz
• power: 3W
• pressure: > 0.012Mpa
• flow rate: 4L/min / 240L/h
• outlet diameter: 2 x ⌀ 4mm
• weight: 0.82kg
• dimensions: 163 x 105 x 88mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Position the pump above the water level or use a suitable check valve, as instructed, to prevent water from flowing back.

Browse air pumps.

Ceramic air stone Ø 75 mm.

Product details

Air stones are an ideal solution for increasing the oxygen concentration in water.

Simply connect it to your air pump.

Stone size: Ø 75 mm

Using with an air pump

The aeration element works with an external air source. Match its size and resistance to the air pump, and check for clogging if the bubbles become less frequent.

Browse air stones.

BOYU HT-8100 100W – submersible heater with thermostat

BOYU Heater HT-8100 is a heater with a thermostat for nutrient reservoirs with a capacity of 130 to 190 L., helping you maintain your desired nutrient solution temperature.

• power: 100W
• suitable for reservoirs: 130-190 L.
• voltage: AC230 / 115V
• frequency: 50/60Hz

The BOYU SES-20 air pump is specifically designed for quiet operation. It has an aluminum motor housing, good heat dissipation and a long service life. It features high flow rate and high air pressure.  

• voltage: 230V, 50/60Hz
• power: 15W
• pressure: > 0.02Mpa
• flow rate: 20L/min / 1200L/h
• outlet diameter: ⌀ 8mm
• dimensions: 224 x 139 x 144mm

Connection and aeration

Choose an air hose and diffuser to suit the pump outlets. Place the pump above the water level or use a suitable check valve as directed to prevent water from flowing back.

Browse air pumps.

The air pump BOYU S-4000 is made of high-polymer composite rubber for longer service life and reliability. It features low operating noise, high air capacity and requires no oil lubrication. It also has electronic control of the intake ratio for high efficiency and low power consumption.

• voltage: 230, 50/60Hz
• power: 9W
• pressure: > 0.012Mpa
• flow rate: 3.2L/min 768L/h
• outlet diameter: 4 x ⌀ 4mm
• dimensions: 206 x 149 x 96mm

Connection and aeration

Choose an air hose and diffuser to suit the pump outlets. Place the pump above the water level or use a suitable check valve as directed to limit water backflow.

Browse air pumps.

The BOYU SES-60 air pump is specially designed for quiet operation. It has an aluminum motor housing, good heat dissipation and a long service life. It features high airflow and high air pressure.  

• voltage: 230V, 50/60Hz
• power: 35W
• pressure: > 0.03Mpa
• flow rate: 60L/min / 3600L/h
• outlet diameter: ⌀ 13mm
• dimensions: 309 x 186 x 210mm

Connection and aeration

Choose an air hose and diffuser to suit the pump outlets. Place the pump above the water level or use a suitable check valve as instructed to prevent water from flowing back.

Browse air pumps.

The BOYU LK-80 air pump is specially designed for quiet operation, like every SES air pump. The only difference is that the LK model has higher airflow and higher air pressure. It features an aluminum motor casing, good heat dissipation, and a long service life.

• voltage: 230V, 50/60Hz
• power: 50W
• pressure: > 0.035Mpa
• flow rate: 80L/min / 4800L/h
• outlet diameter: ⌀ 19mm
• dimensions: 288 x 196 x 193mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve according to the instructions to limit water backflow.

Browse air pumps.

The BOYU SES-40 air pump is specially designed for quiet operation. It has an aluminum motor housing, dissipates heat well, and has a long service life. It features high flow and high air pressure.  

• voltage: 230V, 50/60Hz
• power: 30W
• pressure: > 0.03Mpa
• flow rate: 40L/min / 2400L/h
• outlet diameter: ⌀13mm
• dimensions: 275 x 167 x 176mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve as instructed to prevent water from flowing back.

Browse air pumps.

BOYU FP-4000 submersible water pump, 4000 L/h is suitable for all hydroponic systems and those that require nutrient solution to be pumped. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its smart design.

• voltage: 230V 50/60Hz
• power: 75W
• max. head: 3m
• max. flow rate: 4000 L/h
• outlet diameter: ⌀ 19mm
• dimensions: 132 x 106 x 172mm

Choosing a water pump

Match the flow rate to the required head, hose length and fitting resistance. The stated maximum flow rate does not apply at maximum head.

Browse water pumps.

The BOYU hydroponic air stone is an essential accessory for your soil-free growing system.

This high-quality air stone is specially designed to provide a continuous supply of oxygen to plant roots. With its innovative design, the air stone disperses small oxygen bubbles into the water, ensuring optimal respiration and nourishment for the plants' root systems. This helps promote healthy growth, increase nutrient absorption, and improve plant productivity. The BOYU hydroponic air stone is made from high-quality materials that ensure durability and reliability. Add the BOYU air stone to your hydroponic system and enjoy healthy, thriving plant growth

Using an air pump

The aeration element works with an external air source. Match its size and resistance to the air pump, and check for clogging if the bubbles decrease.

Browse air stones.

The BOYU LK-100 air pump is specially designed for quiet operation, just like every SES air pump. The only difference is that the LK model has a higher flow rate and higher air pressure. It features an aluminum motor housing, good heat dissipation, and a long service life. 

• power supply: 230V, 50/60Hz
• power: 65W
• pressure: > 0.035Mpa
• flow rate: 100L/min / 6000L/h
• outlet diameter: ⌀ 19mm
• dimensions: 288 x 196 x 193mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve, following the instructions, to limit water backflow.

Browse air pumps.

The BOYU SES-30 air pump is specially designed for quiet operation. It has an aluminum motor casing, good heat dissipation, and a long service life. It features high airflow and high air pressure.

• voltage: 230V, 50/60Hz
• power: 25W
• pressure: > 0.025Mpa
• flow rate: 30L/min / 1800L/h
• outlet diameter: ⌀ 13mm
• dimensions: 275 x 167 x 176mm

Connection and aeration

Choose an air hose and diffuser to match the pump outlets. Place the pump above the water level or use a suitable check valve according to the instructions to prevent water from flowing back.

Browse air pumps.

BOYU HT-8200 200 W – submersible heater

BOYU Heater HT-8100 is a heater with a thermostat for nutrient reservoirs with a capacity of 190 to 250L., which helps you maintain your desired nutrient solution temperature.

• power: 200W
• suitable for containers: 190-250L.
• voltage: AC230 / 115V
• frequency: 50/60Hz

BOYU HT-8300 300W – submersible heater with thermostat

BOYU Heater HT-8300 is a heater with a thermostat for nutrient reservoirs with a capacity of 300 to 350 L, helping you maintain your desired nutrient solution temperature.

• power: 300W
• suitable for reservoirs: 300-350 L
• voltage: AC230 / 115V
• frequency: 50/60Hz