LUMATEK

• Light spectrum: full spectrum +
• High efficacy: up to 2.5µmol/J
• PPF: 508µmol/s
• power (100%): 205W
• Coverage area: up to 0.8 x 0.8m
• Waterproof: IP65
• Lifespan: + 60 000 hours
• Light source: high-quality white, red and far-red diodes
• Five operating modes: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Dimensions: 524.5 x 524.5 x 71.6mm
• Weight: 4kg
• Warranty: 3 years

• Light spectrum: full spectrum +
• High efficiency: up to 2.7µmol/J
• PPF: 816µmol/s
• Power: 310W (±2%)
• Coverage area: up to 1.0 x 1.0m
• Waterproof: IP65
• Lifespan: + 60 000 hours
• Light source: high-quality white, red and far-red diodes
• Five different operating modes: OFF, 25%, 50%, 75%, 100% with a 0-10V dimmer (included)
• Dimensions: 559.5x559.5x71.6mm
• Weight: 5.2kg
• Warranty: 3 years

Lumatek LED Zeus 600W PRO 2.9 is a complete LED lighting system which, with a PPF of 1770µmol/s and efficacy of 2.9µmol/J is perhaps one of the best products currently available on the market. Its balanced full spectrum light makes it ideal and sufficient for use during all stages of plant development — from germination, through seedling, cloning or vegetative growth, right to the end of the flowering period for indoor-grown crops.

Why Lumatek LED:

1. Save up to 40% on electricity because less heat is generated in the space, reducing the need for cooling.
2. Gardeners growing with LED lighting notice improved crop quality as well as a higher final yield.
3. Provides + 60 000 hours of operation and a 5-year warranty.

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1770µmol/s
• Power consumption: 615W (±5%)
• Coverage area: 1.4 x 1.4 m.
• Service life: + 60 000 hours
• Light source: Higher Spec Osram and Lumiled diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100% 
• Dimensions: 1091x1182.4x51.9mm.
• Weight: 13.5kg.

As technology advances, high-quality LED horticultural lighting is now a reliable option for growers, offering a significant return on investment. Lumatek full-spectrum LED products balance light quality (spectra) with quantity (intensity and duration) sufficiently to provide a single-source lighting solution for the entire growing cycle — from vegetative growth to flowering.
The linear arrangement of LEDs creates even light distribution at a short distance from the crop, enabling single-source lighting for multilayer growing systems, individual benches in low rooms and grow tents.
Zeus is built using high-quality Lumatek drivers and top-tier Osram and LUMLED LEDs, generating full-spectrum light that is ideal for vegetative and flowering cycles.
For the different plant stages — germination, seedling or vegetative growth — the power of Lumatek LED Zeus 600W PRO 2.9 can be adjusted without losing efficiency. The highly efficient, low-powered LED configuration with six LED bars lowers LED temperature, increasing output and improving light maintenance.

Technical specifications:

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1770µmol/s
• Power consumption: 615W (±5%)
• Coverage area during vegetative growth: 1.5 x 1.5 m
• Coverage area during flowering: 1.4 x 1.4 m.
• Light distribution: 120°
• Service life: + 60 000 hours
• Light source: Higher Spec Osram and LUMLED LEDs
• Fully dimmable with 0-10V light dimmer (included): OFF, 25%, 50%, 75%, 100% 
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1091x1182.4x51.9mm.
• Weight: 13.5kg.
   

Full instructions for use: here*

Full technical specifications: here*

  The new higher-specification LUMATEK ZEUS 600W PRO 3.1 LED is an aluminium multi-bar light fixture that produces high PPF levels of 1990 µmol/s, achieving a photon efficacy of 3.1 µmol/J. As diode technology continues to advance, LUMATEK has increased the total photosynthetic photon flux, raising the total usable photons for the growing area by 10%. This means the fixture now covers 1.5 x 1.5 m for vegetative and flowering stages. The LUMATEK ZEUS 600W PRO 3.1 design provides even photon distribution and can be positioned close to plants. Ultra-high efficacy: 3.1 µmol/J PPF: 1990 µmol/s Coverage area: 1.5 x 1.5 m. Balanced full-spectrum

• light Diodes: Samsung
• LM301H EVO
• & Osram 4.24 Light distribution:
• 120° Five power settings:
• OFF, 25%, 50%, 75%, 100% External control:
• with LUMATEK Digital
• Panel PLUS 2.0 (HID+LED) warranty:
• 5 years Weight: 13.5 kg Dimensions: 1182 x
• 1091 x 52
• mm   For
• different cultivars, seedlings and vegetative growth

periods, the LUMATEK ZEUS 600W PRO 3.1 can be dimmed without loss of efficiency. The highly efficient low-power diode

configuration with 6 LED bars lowers diode temperatures, increases output and improves light maintenance. As standard, this fixture can also be externally controlled with the

LUMATEK Plus 2.0 control panel, including light-timing setup, automated dimming (in 1% increments), temperature safety control, and sunrise/sunset mode for up to 100 LUMATEK ZEUS 600W PRO 3.1 fixtures per controller. Lumatek Plus 2.0 Control Panel Compatibility with universal control systems. Lumatek LED fixtures

can be fully controlled

with the Lumatek Plus 2.0 Digital Panel or any other control system using a 0-10V output signal. Even if your universal controller has an RJ-port interface, you can control our LEDs using an RJ-to-0-10V signal-conversion adapter. Technical specifications: Input voltage: 220-240 V AC, 50-60 Hz Power consumption: 640 W (± 5%) @ 230 V

AC Ultra-high

• efficacy: 3.1 µmol/J PPF: 1990 µmol/s Coverage
• area: 1.5 x 1.5 m. Balanced full-spectrum light Diodes: SAMSUNG
• LM301H EVO | OSRAM
• 4.24 Light
• distribution: 120° Fully dimmable with
• 0-10V light dimmer (included):
• OFF, 25%, 50%, 75%, 100% External
• control: with LUMATEK
• Digital Panel PLUS 2.0 (HID+LED) Daisy-chain capability: yes Thermal management:
• passive water resistance: IP65 Certifications: CE, EMC, LVD
• Service life: L90 > 60 000
• hours warranty:
• 5 years
• Weight: 13.5 kg Dimensions:
• 1182 x 1091 x 52 mm
• The set includes:
• 6 x
• LUMATEK 100W PRO 3.1 LED bars

with magnetic

• mounting 1 x LUMATEK 600W PRO 3.1 driver with
• connecting cables 1 x LED frame with connecting
• cables 1 x 0-10 V light
• dimmer 2 x metal hangers
• 1 x manual
• Full instructions

for use: here* Full

technical specifications: here*

Lumatek LED Zeus 600W is a complete LED lighting system which, with its PPF of 1380µmol/s and efficiency of 2.3µmol/J, is perhaps one of the best products currently available on the market. The light it produces, with a balanced full spectrum, makes it ideal and sufficient for use throughout all stages of plant development—from germination, through seedlings, cloning or vegetative growth, right to the end of the flowering period for indoor-grown crops.

Why Lumatek LED:

1. You save up to 40% on electricity, because less heat is generated in the room and consequently less cooling is required.
2. Gardeners growing with LED lighting notice improved crop quality as well as a higher final yield.
3. Guaranteed 60 000 h of operation and a 5-year warranty.

• Balanced full-spectrum light
• ​High efficiency: 2.3µmol/J
• PPF: 1380µmol/s
• Power consumption: 600W
• Coverage area: 1.5 x 1.5m.
• Lifespan: 60 000 hours
• Light source: Osram and Lumileds Philips diodes
• Fully adjustable: OFF, 25%, 50%, 75%, 100%
• Dimensions: 1091x1182.4x51.9mm.
• Weight: 13.5kg.

With the advancement of technology, high-quality LED horticultural lighting is now a reliable option for growers, offering a significant return on investment. Lumatek full-spectrum LED products balance the quality (spectra) and quantity (intensity and duration) of light sufficiently to provide single-source lighting for the entire growing cycle—from vegetative growth to the flowering period.
The linear arrangement of the LEDs creates an even distribution of light close to the crop, allowing single-source lighting for multi-layer growing systems, single benches in low rooms and grow tents.
Zeus is built using high-quality Lumatek drivers and top-of-the-range Osram and Lumileds Philips LEDs, generating full-spectrum light ideal for vegetative and flowering cycles.
For different plant stages—germination, seedlings or vegetative growth—the output of the Lumatek LED Zeus 600W can be adjusted without any loss of efficiency. The highly efficient, low-powered LED configuration with six LED bars reduces LED temperature, increasing output and improving light maintenance.

Technical specifications:

• Balanced full-spectrum light
• ​High efficiency: 2.3µmol/J
• PPF: 1380µmol/s
• Power consumption: 600W
• Coverage area: 1.5 x 1.5m.
• Light distribution: 120°
• Lifespan: 60 000 hours
• Light source: Osram and Lumileds Philips diodes
• Fully adjustable with 0-10V light dimmer (included): OFF, 25%, 50%, 75%, 100% 
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1091x1182.4x51.9mm.
• Weight: 13.5kg.

Full instructions for use: here*

Full technical specifications: here*

Lumatek HPS Lamp 250W 240V is a pulse-start* high-pressure sodium bulb / lamp, suitable for both growth / vegetative growth and the flowering phase. It is made from durable PCA ceramic, which allows the lamp to operate at higher internal temperatures, increasing output and efficiency. Pulse-start technology enables faster start-up and restart, longer lamp life and improved lumen maintenance.

• for growth and flowering
• power: 250W
• current: 3.0A
• luminous flux: 33 000 lm
• efficacy: 132 lm/W
• PPF: 400 μmol/s
• colour temperature: 2000 K
• lifespan: 28 000 h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

LUMATEK 600W 240V CONTROLLABLE BALLAST is a digital controllable ballast that can operate with both high-pressure sodium (HPS) and metal-halide (MH) lamps. It provides stable and precise voltage to the lamp, creating higher PAR/PPF output and is nevertheless far more energy efficient than most ballasts on the market! The ballast features intelligent start technology and a soft-dimming mechanism! It can be externally controlled with LUMATEK Control Panel Plus 2.0 (sold separately).

• Output power: 600W
• 4 operating modes: 250W - 400W - 600W - 660W
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• 5-year warranty!

An electronic ballast is a solution to the problem of irregular voltage in the power grid! Magnetic ballasts age over time, begin to make noise and consume more electricity, heat up more and more while their light output decreases. This does not happen with digital ballasts—they maintain the same level of output and efficiency. LUMATEK ballasts are programmed for “soft start”, meaning no voltage or current peak is required to start the lamp; this extends bulb life, does not overload the electrical installation and allows a larger number of ballasts to start safely at the same time.

Full technical specifications:

• Output power: 600W
• Input voltage: 240V, 50/60Hz
• Maximum current: 2.7A
• power factor*: > 0.99
• Efficiency: 96%
• THD*: < 8%
• Dimming capability / 4 operating modes: 250W - 400W - 600W - 660W
• Compatible with: 250W, 400W, 600W HPS / MH lamps
• Operating frequency: high frequency
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• Dimensions: 310 x 114 x 81mm
• Weight: 2.7kg
• warranty: 5 years

Operating instructions:

• For use with a 250W HPS or MH lamp: the ballast must be always and only in 250W mode!
• For use with a 400W HPS or MH lamp: the ballast must never be in 600W or 660W mode!
• For use with a 600W HPS or MH lamp: Start in 600W mode and only after the lamp has fully warmed up (after approximately 10min. of operation), can you switch to 660W mode!

1. Disconnect the power when changing the lamp!
2. LUMATEK recommends replacing the lamp after 6-12 months of operation!
3. VERY IMPORTANT: allow the lamp to cool completely (20-30min.) before switching it on again! (Doing otherwise shortens its life.)
4. Also, do not switch the lamp off before it has reached full power!

Lumatek LED Zeus Compact 465W is a complete LED lighting system which, with its PPF of 1070µmol/s and efficiency of 2.3µmol/J, is perhaps one of the best products currently available on the market. The light it produces, with a balanced full spectrum, makes it ideal and sufficient for use throughout all stages of plant development—from germination, through seedlings, cloning or vegetative growth, right to the end of the flowering period for indoor-grown crops.

Why Lumatek LED:

1. You save up to 40% on electricity, because less heat is generated in the room and consequently less cooling is required.
2. Gardeners growing with LED lighting notice improved crop quality as well as a higher final yield.
3. Provides 60 000 hours of operation and a 5-year warranty.

• Balanced full-spectrum light
• ​High efficiency: 2.3µmol/J
• PPF: 1070µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Lifespan: 60 000 hours
• Light source: Osram and Lumileds Philips diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100%
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

As technology advances, high-quality LED horticultural lighting is now a reliable option for growers, offering a significant return on investment. Lumatek full-spectrum LED products balance light quality (spectra) with quantity (intensity and duration) sufficiently to provide a single-source lighting solution for the entire growing cycle, from vegetative growth through flowering.
The linear arrangement of LEDs creates even light distribution at a short distance from the crop, enabling single-source lighting for multilayer growing systems, single benches in low rooms and grow tents.
Zeus is built using high-quality Lumatek drivers and top-bin Osram and Lumileds Philips LEDs, generating full-spectrum light ideal for the vegetative and flowering cycle.
For different stages of the plant – germination, propagation or vegetative growth – the power of the Lumatek LED Zeus Compact 465W can be adjusted, without losing efficiency. The highly efficient, low-powered LED configuration with five 93W LED bars reduces LED temperature, increasing output and improving light maintenance.

Technical specifications:

• Balanced full-spectrum light
• ​High efficiency: 2.3µmol/J
• PPF: 1070µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Light distribution: 120°
• Lifespan: 60 000 hours
• Light source: Osram and Lumileds Philips diodes
• Fully adjustable with 0-10V light dimmer (included): OFF, 25%, 50%, 75%, 100% 
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

Full instructions for use: here*

Full technical specifications: here*

Lumatek MH Lamp 400W 240V is a pulse-start* metal halide lamp for growth / vegetation. It is made from durable quartz, allowing the lamp to operate at higher internal temperatures and increasing power and efficiency. Pulse-start technology enables faster start and restart times, longer lamp life and increased PAR / PPF output maintenance.

• for growth
• power: 400W
• current: 4.6 A
• life span: 10 000 h
• luminous flux: 35 000 lm
• colour temperature: 6000 K
• efficiency: 88 lm/W
• PPF: 500μmol/s
• power supply: 240V, 50Hz
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

LUMATEK 1000W 240V CONTROLLABLE BALLAST is a digitally controllable ballast that can operate with both sodium (HPS) and metal-halide (MH) lamps. It provides stable, precise voltage to the lamp, delivering higher PAR/PPF output while being far more energy-efficient than most ballasts on the market. The ballast features intelligent start technology and a soft-dimming mechanism. It can be externally controlled with the LUMATEK Control Panel Plus 2.0 (sold separately).

• output power: 1000W
• 4 operating modes: 600W - 750W - 1000W - 1000W SL
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuits, overheating, overvoltage / undervoltage and end of lamp life!
• 5-year warranty!

An electronic ballast is a solution to the problem of irregular mains voltage. Magnetic ballasts age over time, become noisy and consume more electricity, while heating up ever more as their light output declines. This does not happen with digital ballasts: they maintain the same output and efficiency. LUMATEK ballasts are programmed for a “soft start”, meaning no voltage or current spike is required to start the lamp. This extends bulb life, does not strain the electrical installation and enables more ballasts to be started safely at the same time.

Full technical specifications:

• output power: 1000W
• Input voltage: 240V, 50/60Hz
• max. current: 4.7A
• power factor*: > 0.99
• THD*: < 10%
• dimming capability / 4 operating modes: 600W - 750W - 1000W - 1000W SL
• compatible with: 600W, 750W, 1000W HPS / MH lamps
• operating frequency: high frequency
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• dimensions: 318 x 166 x 96mm
• weight: 4.25 kg
• warranty: 5 years

Operating instructions:

• for use with a 600W HPS or MH lamp: the ballast must always be set to 600W mode only!
• for use with a 750W HPS or MH lamp: the ballast must never be set to 1000W or 1000W SL mode!
• for use with a 1000W HPS or MH lamp: start in 1000W mode and only after the lamp is fully warmed up (after around 10 min. of operation), you can switch to 1000W SL mode!

1. Disconnect the power when changing the lamp!
2. LUMATEK recommends replacing the lamp after 6-12 months of operation!
3. VERY IMPORTANT: allow the lamp to cool completely (20-30min.) before switching it on again! (Doing otherwise shortens its life.)
4. Also, do not switch the lamp off before it has reached full power!

Lumatek HPS Lamp 600W 400V is a pulse-start* sodium lamp suitable for growth / vegetative growth as well as flowering. 400V HPS lamps are more efficient than standard HPS lamps and therefore offer a 10% increase in light intensity and PAR / PPF output. Made using high-quality ceramic arc tube technology, the lamp can operate at higher internal temperatures, increasing power and efficiency. The pulse-start technology enables faster start and restart times, longer lamp life and increased PAR / PPF maintenance.

• for growth and flowering
• power: 600W
• current: 3.6A
• luminous flux: 90 000 lm
• efficacy: 150 lm/W
• PPF: 1100μmol/s
• efficacy: 1.83 μmol/s
• colour temperature: 2000K
• life: 24 000h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Lumatek VF650W LED driver is a power driver for VF series lighting units: VF (Lumatek LED VF 90W and Lumatek LED VF 120W).

• can power up to 7 VF90 or up to 5 VF120 simultaneously
• can be switched off or dimmed using a standard 0-10V dimmer (sold separately)
• operating temperature: -20º - +40ºC
• operating humidity: 20% - 90%
• Water resistance: IP65
• dimensions: 230 x 120 x 50 mm
• weight: 2.0 kg
• warranty: 3 years

The driver is intended for indoor grow rooms with a controlled climate. It may be used in environments with humidity up to 90%, but must not be used in a more humid environment or outdoors!

Technical specifications:

• can power up to 7 VF90 or up to 5 VF120 simultaneously
• can be switched off or dimmed using a standard 0-10V dimmer (sold separately)
• operating temperature: -20º - +40ºC
• operating humidity: 20% - 90%
• Water resistance: IP65
• dimensions: 230 x 120 x 50mm
• weight: 2.0kg
• weight with packaging: 4.7kg
• warranty: 3 years

Lumatek LED VF 90W is the perfect diode / LED / lighting for young plants grown using vertical farming (hence the name of the VF series - Vertical Farming). These versatile, high-efficiency units ensure 100% success in your projects, from seed germination to nursery propagation.

• ideal for seeds and cuttings / clones
• power (100%): 103W @ 230V
• coverage area: 1.2 x 0.5 m
• efficacy: 2.4µmol/J
• PPF: 244 µmol/s
• power supply: Lumatek VF650W LED driver (sold separately), which can power up to 7 x VF 90W units
• dimensions: 1207 x 521 x 20.5mm
• weight: 1.72 kg
• warranty: 3 years

The VF series now features a new clear Glue protective coating technology on the LED bars, resulting in higher light transmission of 99% without light loss, extended diode life, extra corrosion resistance and high IP65 water resistance. For basic maintenance, simply clean with damp cotton.

Instructions for use: here* and here*

Full technical specifications:

• ideal spectrum and light intensity for young plants
• ideal for seeds and cuttings / clones
• power (100%): 103W @ 230V
• coverage area: 1.2 x 0.5m
• efficacy: 2.4µmol/J
• PPF: 244 µmol/s
• includes 3 x 30W LED bars attached to the frame
• colour temperature: 4000K, 3000K
• light distribution: 120º
• input current: 220-240V, 50-60Hz
• external-control capability: with LUMATEK Control Panel Plus 2.0 or universal 0-10V controllers
• fully dimmable (OFF, 25%, 50%, 75%, 100%) after connection to 650W LED driver
• passive cooling
• shortens the plant growth cycle
• power supply: Lumatek VF650W LED driver (sold separately), which can power up to 7 x VF 90W units
• Plug and Play (simply connect it to the mains and switch it on)
• IP65 water resistance
• lifetime: > 60 000 hours
• 3-year warranty
• dimensions: 1207 x 521 x 20.5mm
• weight: 1.72 kg
• warranty: 3 years

• Balanced full-spectrum light
• ​very high efficacy: up to 2.9µmol/J
• PPF: 2925 µmol/s
• Power consumption: 1025W (± 5%)
• Coverage area: 2.0 x 1.5m
• Lifespan: + 60 000 hours
• Light distribution: 120°
• Light source: Higher Spec Osram and Lumiled LEDs
• Fully adjustable: OFF, 25%, 50%, 75%, 100%  with 0-10V dimmer (included)
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 1700 x 1099.6 x 48.2 mm
• Weight: 17.5 kg
• Warranty: 5 years

Lumatek LED VF 120W is the perfect diode / LED / lighting solution for young plants grown using vertical farming (hence the series name VF - Vertical Farming). These versatile and highly efficient devices ensure 100% success in your projects, from seed germination to nursery propagation.

• ideal for seeds and cuttings / clones
• power (100%): 130W @ 230V
• coverage area: 1.2 x 0.5m
• efficacy: 2.4µmol/J
• PPF: 308µmol/s
• power supply: Lumatek VF650W LED driver (sold separately), which can power up to 5 x VF 120W devices
• dimensions: 1207 x 521 x 20.5mm
• weight: 2.1kg
• warranty: 3 years

The VF series now includes new clear Glue protective-coating technology on the LED bars, resulting in higher light transmission of 99% with no loss of light, extended diode life, additional corrosion resistance and high IP65 water resistance. For basic maintenance, simply clean with damp cotton.

Instructions for use: here* and here*

Full technical specifications:

• ideal spectrum and light intensity for young plants
• ideal for seeds and cuttings / clones
• power (100%): 130W @ 230V
• coverage area: 1.2 x 0.5m
• efficacy: 2.4µmol/J
• PPF: 308µmol/s
• includes 4 x 30W LED bars attached to the frame
• colour temperature: 4000K, 3000K
• light distribution: 120º
• input current: 220-240V, 50-60Hz
• external-control capability: with LUMATEK Control Panel Plus 2.0 or universal 0-10V controllers
• fully dimmable (OFF, 25%, 50%, 75%, 100%) after connection to 650W LED driver
• passive cooling
• shortens the plant growth cycle
• power supply: Lumatek VF650W LED driver (sold separately), which can power up to 5 x VF 120W devices
• Plug and Play (simply connect it to the mains and switch it on)
• IP65 water resistance
• lifetime: > 60 000 hours
• 3-year warranty
• dimensions: 1207 x 521 x 20.5mm
• weight: 2.1kg
• warranty: 3 years

Lumatek Zeus 465W PRO 2.9 is a complete LED lighting kit that, with its PPF of 1353µmol/s and efficacy of 2.9µmol/J, may be one of the best products currently available on the market. Its balanced full spectrum makes it ideal and sufficient for use throughout all stages of plant development - from germination and seedlings to cloning or vegetative growth, right through to the end of the flowering period for indoor-grown crops.

Why Lumatek LED:

1. Save up to 40% on electricity because less heat is generated in the space, reducing the need for cooling.
2. Gardeners growing with LED lighting notice improved crop quality as well as a higher final yield.
3. Guaranteed for 60 000h of operation and covered by a 5-year warranty.

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1353µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Lifespan: 60 000 hours
• Light source: Osram and LUMLED diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100%
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

As technology advances, high-quality LED horticultural lighting is now a reliable option for growers, offering a significant return on investment. Lumatek full-spectrum LED products balance light quality (spectra) with quantity (intensity and duration) sufficiently to provide a single-source lighting solution for the entire growing cycle - from vegetative growth through to flowering.
The linear layout of the LEDs creates even light distribution at a short distance from the crop, allowing single-source lighting for multi-tier growing systems, single benches in low rooms and grow tents.
Zeus is built using high-quality Lumatek drivers and top-tier Osram and LUMLED LEDs, producing full-spectrum light ideal for vegetative and flowering cycles.
For the different stages of the plant - germination, seedling or vegetative growth - the power of the Lumatek Zeus 465W COMPACT PRO 2.9 can be adjusted without losing efficiency. The highly efficient, low-powered LED configuration with five 93W LED bars lowers LED temperature, increasing output and improving light maintenance.

Technical specifications:

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1353µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Light distribution: 120°
• Lifespan: 60 000 hours
• Light source: Osram and LUMLED diodes
• Fully dimmable with 0-10V light dimmer (included): OFF, 25%, 50%, 75%, 100%
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

Full instructions for use: here*

Full technical specifications: here*

LUMATEK Digital Panel PLUS 2.0 (HID+LED) is a digital lighting controller that can control all LED light fixtures, drivers and Lumatek ballasts. Using innovative technology, this controller intelligently monitors room temperatures and the light cycle, and safely controls the dimming and switching on/off of the lighting.

• controls up to 400 ballasts or 100 LED drivers
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• compatible with all Lumatek ballasts: 315W, 600W, 630W and 1000W
• compatible with all Lumatek LED drivers: 90W, 120W, 465W, 600W and 1000W
• temperature sensor for monitoring and control
• automatic temperature regulation through dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• warranty: 3 years

Instructions for use: here* and here*

Lumatek Digital Panel Plus 2.0 is a dual-signal, dual-channel digital lighting controller. Each of its two channels (zones) can control up to 200 Lumatek ballasts or up to 50 LED fixtures. Each channel (zone) can control ballasts/drivers with the same wattage; Zone A can control ballasts/drivers with the same power supply as Zone B, or Zone B can be configured to control ballasts/drivers with a different wattage. For example, Zone A can control 600W LED fixtures, while Zone B can control 600W or 315W HID ballasts.

Features:

• controls up to 400 ballasts or 100 LED fixtures
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• 24-hour lighting schedule and switching
• temperature sensor for monitoring and control
• dimming with up to ±1% accuracy
• automatic temperature regulation through dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• automated light-intensity control

Specifications:

• power supply: adapter 100 - 240V, 50/60Hz - DC 5V/2A
• compatible with all Lumatek ballasts: 315W, 600W, 630W and 1000W
• compatible with all Lumatek LED drivers: 90W, 120W, 465W, 600W and 1000W
• dimming range: 10% - 115%
• power dimming accuracy: 1%
• sunrise/sunset duration: 0-30 min
• dimensions: 125 x 80 x 25mm
• warranty: 3 years

Lumatek Zeus 1000W PRO EVO 3.1 is a highly efficient LED fixture designed for professional growers seeking maximum performance and even illumination across large areas. With its unique rectangular frame and exceptional light efficiency, this model offers optimal coverage and light penetration suitable for all growth stages.​

Advantages:

• Full-spectrum light: Ideal for all growth phases – from vegetative growth to flowering.

• Modular design: 10 magnetic LED bars of 100W for easy replacement and maintenance.

• High-quality components: Samsung LM301H EVO and Osram diodes for maximum efficiency.

• Protection: Transparent adhesive coating for 99% light transmission and corrosion protection.

• Flexibility: Suitable for various configurations – from low rooms to multi-layer systems

Technical specifications:

• efficacy: up to 3.1 µmol/J
• light output (PPF): 3125 µmol/s
• input voltage: 220-240V, 50-60Hz
• input power at 100%: 1025 W (±5%) at 230 V AC
• coverage: 2.0 x 1.5 m
• waterproof protection: IP65
• lifetime: 60 000 hours
• light distribution: 120°
• cooling: passive cooling
• power modes: OFF.-25%-50%-75%-100% with 0-10V light dimmer (included)
• external control: with Lumatek Digital Panel Plus 2.0
• weight: 18 kg
• dimensions: 1700 x 1200 x 84 mm
• spectrum: full spectrum F
• warranty: 5 years

The set includes:

• 10 x full-spectrum LED bars Lumatek 100W Pro 3.1
• 1 x LED frame
• 1 x electronic ballast with connecting cables Lumatek 1000W PRO 3.1
• 1 x 0-10V light dimmer + Velcro
• 2 x metal hanging wires
• 1 x manual in English

If you have a damaged ballast on your Lumatek - ZEUS, we offer the possibility to purchase it as a spare part. 

Electronic Ballast for LED lighting fixtures Lumatek - ZEUS PRO 2.9 and 3.1 models 600W

Lumatek HPS Lamp 1000W 240V is a pulse-start sodium lamp designed to operate with the Lumatek 1000W 240V controllable ballast. It is suitable for growth / vegetative growth as well as the flowering phase. Manufactured using high-quality ceramic arc-tube technology, the lamp can operate at higher internal temperatures, increasing output and efficiency. Pulse-start technology enables faster start and restart times, longer lamp life and increased PAR / PPF output maintenance.

• for growth and flowering
• power: 1000W
• current: 10.3A
• luminous flux: 130 000 lm
• efficacy: 130 lm/W
• PPF: 1850 μmol/s
• efficacy: 1.85 μmol/s
• colour temperature: 2000K
• lifespan: 24 000h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

T-Junction + 5m Lumatek T-Junction + 5m control cable. This cable component is used to connect Lumatek Zeus LED light fixtures together in series, so they can be externally controlled with LUMATEK Digital Panel PLUS 2.0 (HID+LED). The set includes:

• T-Junction T-Junction (3 x LLT M12 connectors - 2x female, 1x male)
• 5 m control cable with H05RN-F 2x 0.5mm, with LLT M12 male connector and LLT M12 female connector

Lumatek Zeus LED grow lights and LED accessories: connection options for the various models in English here*.