Controllers and timer boards for lighting

The G-Systems Timer Box 4 × 600 W is a timer board for switching compatible lighting on and off as a group.

Features and functions

• Lighting configuration: 4 × 600 W.
• Version with a separate heating output when the lights are off.
• The timer sets the switch-on and switch-off times.

Size the power supply and protective devices according to the diagram for the exact version. Check the load on each output and the inrush current of the ballasts or drivers. For the version with heating, check the permitted load of the heating output separately.

Choosing a power board

Check the power supply, total current, and individual output limits. For LED drivers and ballasts, account for inrush current. The number of sockets is not the number of power circuits.

Browse lighting controllers and boards.

The Hager Power Panel 36 × 600 W is a distribution panel for organizing a group of lights and additional loads.

Features and functions

• Configuration designation: 36 × 600 W.
• Constant-power outputs: 8.
• Heating outputs in this configuration: 2.

Constant-power outputs do not indicate the number of independent power circuits. Before choosing, check the power supply, protection devices, and permissible load of each output. Installation and sizing of the power system must be carried out by a qualified electrician.

Choosing a power distribution panel

Check the power supply, total current, and the limits of individual outputs. For LED drivers and ballasts, account for inrush current. The number of outlets is not the number of power circuits.

Browse lighting controllers and panels.

G-Systems Timer Box 8 × 600 W is a timer board for switching compatible lighting on and off as a group.

Features and functions

• Lighting configuration: 8 × 600 W.
• Version with a separate heating output when the lighting is off.
• The timer sets the on and off times.

Size the power supply and protection devices according to the wiring diagram for the exact version. Check the load on each output and the inrush current of the ballasts or drivers. For versions with heating, check the permitted load on the heating output separately.

Choosing a power distribution board

Check the power supply, total current, and the limits of the individual outputs. For LED drivers and ballasts, account for the inrush current. The number of sockets is not the number of power circuits.

Explore lighting controllers and boards.

The Hager Power Panel 32 × 600 W is a distribution board for organizing a group of lights and additional loads.

Features and functions

• Configuration designation: 32 × 600 W.
• Continuously powered outputs: 8.
• Heating outputs in this configuration: 2.

The continuous outputs do not indicate the number of independent power circuits. Before choosing, confirm the power supply, protection devices, and permissible load for each output. Installation and sizing of the power system must be carried out by a qualified electrician.

Choosing a power distribution board

Check the power supply, total current, and individual output limits. For LED drivers and ballasts, account for inrush current. The number of outlets is not the number of power circuits.

Browse lighting controllers and boards.

G-Systems Timer Box 6 × 600 W is a timer board for switching compatible lighting on and off as a group.

Features and functions

• Lighting configuration: 6 × 600 W.
• Version for timer-controlled lighting.
• The timer sets the on and off times.

Size the power supply and protection devices according to the wiring diagram for the exact version. Check the load on each output and the inrush current of the ballasts or drivers. For versions with heating, check the permitted load on the heating output separately.

Choosing a power distribution board

Check the power supply, total current, and the limits of the individual outputs. For LED drivers and ballasts, account for the inrush current. The number of sockets is not the number of power circuits.

Explore lighting controllers and boards.

The Hager Power Panel 44 × 600 W is a distribution panel for organizing a group of lights and additional loads.

Specifications and features

• Configuration designation: 44 × 600 W.
• Always-on outputs: 8.
• Heating outputs, depending on configuration: 3.

The always-on outputs do not indicate the number of independent power circuits. Before choosing, check the power supply, protection devices, and permitted load for each output. A qualified electrician must install and size the electrical system.

Choosing a power distribution panel

Check the power supply, total current, and limits for individual outputs. Account for inrush current with LED drivers and ballasts. The number of sockets is not the number of power circuits.

Browse lighting controllers and panels.

The G-Systems Timer Box 12 × 600 W is a timer-controlled panel for switching compatible lighting on and off as a group.

Specifications and features

• Lighting configuration: 12 × 600 W.
• Version for timer-controlled lighting.
• The timer sets the switching on and off times.

Size the power supply and protection devices according to the diagram for the exact version. Check the load on each output and the inrush current of the ballasts or drivers. For the version with heating, check the permitted load of the heating output separately.

Choosing a power distribution panel

Check the power supply, total current, and limits for individual outputs. Account for inrush current with LED drivers and ballasts. The number of sockets is not the number of power circuits.

Browse lighting controllers and panels.

G-Systems Timer Box 12 × 600 W is a timer panel for switching compatible lighting on and off as a group.

Features and functions

• Lighting configuration: 12 × 600 W.
• Version with a separate heating output when the lights are off.
• The timer sets the on and off times.

Size the power supply and protection according to the wiring diagram for the exact version. Check the load on each output and the inrush current of the ballasts or drivers. For versions with heating, verify the permissible load on the heating output separately.

Choosing a power distribution panel

Check the power supply, total current, and individual output limits. Account for inrush current from LED drivers and ballasts. The number of sockets is not the number of power circuits.

Browse lighting controllers and panels.

G-Systems Timer Box 6 × 600 W is a timer panel for switching compatible lighting on and off as a group.

Features and functions

• Lighting configuration: 6 × 600 W.
• Version with a separate heating output when the lights are off.
• The timer sets the on and off times.

Size the power supply and protection according to the wiring diagram for the exact version. Check the load on each output and the inrush current of the ballasts or drivers. For versions with heating, verify the permissible load on the heating output separately.

Choosing a power distribution panel

Check the power supply, total current, and individual output limits. Account for inrush current from LED drivers and ballasts. The number of sockets is not the number of power circuits.

Browse lighting controllers and panels.

G-Systems Timer Box 8 × 600 W is a timer panel for collectively switching compatible lighting on and off.

Features and functions

• Lighting configuration: 8 × 600 W.
• Version for timer-controlled lighting.
• The timer sets the on and off times.

Size the power supply and protective devices according to the wiring diagram for the exact version. Check the load on each output and the inrush current of the ballasts or drivers. For the version with heating, verify the permitted load on the heating output separately.

Choosing a power distribution panel

Check the power supply, total current, and individual output limits. For LED drivers and ballasts, account for the inrush current. The number of outlets is not the number of power circuits.

Browse lighting controllers and panels.

The Davin 32 × 600 W is a timer-controlled distribution panel in a version with a specified 380 V power supply.

Specifications and features

• Configuration designation: 32 × 600 W.
• Two heating outputs according to the described version.

Before ordering, confirm the exact model, power supply diagram, protections, and permitted loads. Installation must be adapted to the specific electrical system.

Choosing a power distribution board

Check the power supply, total current, and individual output limits. For LED drivers and ballasts, account for inrush current. The number of sockets is not the number of power circuits.

Browse lighting controllers and panels.

The Davin DV44 is a timer relay box for switching groups of lights on and off.

Specifications and features

• Configuration: up to 16 600 W lights.
• For the DV44, the manual specifies four separate power circuits.

Check the diagram for the exact version, power circuits, and protections before installation. The permitted number of ballasts does not automatically apply to arbitrary LED loads.

Choosing a power distribution board

Check the power supply, total current, and individual output limits. For LED drivers and ballasts, account for inrush current. The number of sockets is not the number of power circuits.

Browse lighting controllers and panels.

Hager Power Panel 48 × 600 W is a distribution panel for organizing a group of lights and additional loads.

Features and functions

• Configuration designation: 48 × 600 W.
• Always-powered outputs: 8.
• Heating outputs per configuration: 3.

Always-on outputs do not indicate the number of independent power circuits. Before choosing, clarify the power supply, protection devices, and permissible load for each output. Installation and sizing of the power system must be carried out by a qualified electrician.

Choosing a power distribution panel

Check the power supply, total current, and individual output limits. For LED drivers and ballasts, account for inrush current. The number of sockets is not the number of power circuits.

Browse lighting controllers and panels.

Davin DV33K is a timer relay box for switching lighting on and off in groups.

Features and functions

• Configuration: up to 12 lights at 600 W.
• Version with heating output.

Check the exact version's wiring diagram, power circuits, and protective devices before installation. The permitted number of ballasts does not automatically apply to an arbitrary LED load.

Choosing a power board

Check the power supply, total current, and individual output limits. For LED drivers and ballasts, account for inrush current. The number of sockets is not the number of power circuits.

Browse lighting controllers and boards.

Lumatek Digital Panel Plus 2.0 is a two-channel controller for compatible Lumatek HID ballasts and LED drivers.

Features and functions

• Two controlled zones, A and B.
• Channel capacity: up to 200 compatible HID ballasts or up to 50 LED drivers.
• Total for both zones: up to 400 HID ballasts or up to 100 LED drivers.
• Photoperiod control, dimming, and sunrise and sunset.
• Temperature monitoring with lighting limiting functions.
• Warranty stated in the store listing: 3 years.

Check the compatibility of the specific driver or ballast and the required control cables. The number of devices is the signal control capacity and does not mean that the lights are powered through the control panel.

Connecting to the lighting

Check the control signal and compatibility of the specific ballast or driver. The control channel and the power supply to the lights have different functions.

Browse lighting controllers.

G-Systems Light Controller V1.60 is a two-channel controller for managing compatible lighting.

Features and functions

• Model: Light Controller, version V1.60.
• Two control channels.

Confirm the supported control signals, ballasts or drivers, and required cables before ordering. The number of channels does not determine the number of power outlets or guarantee universal compatibility.

Connecting the lighting

Check the control signal and the compatibility of the specific ballast or driver. The control channel and the power supply for the lights serve different functions.

Explore lighting controllers.

The Davin DV44K is a timer relay box for switching groups of lights on and off.

Specifications and features

• Configuration: up to 16 lights at 600 W each.
• Version with heating output.

Check the wiring diagram for the exact version, power circuits, and protective devices before installation. The permitted number of ballasts does not automatically apply to arbitrary LED loads.

Choosing a power distribution panel

Check the power supply, total current, and individual output limits. For LED drivers and ballasts, account for inrush current. The number of sockets is not the number of power circuits.

Browse lighting controllers and control panels.

The G-Systems Timer Box IV 4 × 600 W combines timer-controlled lighting with a heating output and temperature monitoring.

Specifications and features

• Lighting configuration: 4 × 600 W.
• Heating output in the corresponding operating mode.
• Temperature sensor and temperature-based control functions.
• Signal dimming via compatible 0–10 V or PWM control, depending on the version.

Check the permitted load on the heating output and the compatibility of the ballasts or drivers. Wattage, number of sockets, and control signal are separate specifications.

Warranty stated in the store offer: 2 years.

Choosing a power distribution panel

Check the power supply, total current, and individual output limits. For LED drivers and ballasts, account for inrush current. The number of sockets is not the number of power circuits.

Browse lighting controllers and control panels.

Davin DV33 is a timer relay box for switching lighting on and off in groups.

Specifications and features

• Configuration: up to 12 lights at 600 W each.

Check the diagram for the exact version, power circuits, and protection devices before installation. The permissible number of ballasts does not automatically apply to an arbitrary LED load.

Choosing a power distribution panel

Check the power supply, total current, and limits of the individual outputs. Account for inrush current with LED drivers and ballasts. The number of sockets is not the number of power circuits.

Browse lighting controllers and panels.

The Hager Power Panel 40 × 600 W is a distribution panel for organizing a group of lights and additional loads.

Specifications and features

• Configuration designation: 40 × 600 W.
• Permanently powered outputs: 8.
• Heating outputs in this configuration: 3.

The number of permanently powered outputs does not indicate the number of independent power circuits. Before choosing, confirm the power supply, protection devices, and permissible load for each output. Installation and sizing of the power system must be carried out by a qualified electrician.

Choosing a power distribution panel

Check the power supply, total current, and limits of the individual outputs. Account for inrush current with LED drivers and ballasts. The number of sockets is not the number of power circuits.

Browse lighting controllers and panels.