Products

Falcon 2500 m³/h is a high-efficiency carbon filter designed for professional odour control in ventilation systems with airflow up to 2500 m³/h. It uses high-quality 100% Australian RC412 activated carbon, which effectively absorbs odour-causing molecules, providing clean air and discreet operation in grow rooms. Thanks to its lightweight aluminium construction and high air permeability, the filter combines excellent efficiency with easy installation.

The 250/1100 mm carbon filter is designed for professional air-extraction systems where effective odour control is essential. The interior is filled with activated carbon RC412, produced in Australia and steam-activated at very high temperatures. This type of carbon has high porosity, low density and exceptional absorption capacity, making it one of the most effective materials for air filtration.

Air passes through the thick activated-carbon bed, which traps odour molecules before they reach the extractor and are discharged outside the room. This ensures a constant flow of purified air without unpleasant odours. For maximum efficiency, the filter should be installed before the extractor, so that the entire airflow passes through the carbon.

Falcon uses a high-air-permeability aluminium outer mesh, which combines low weight with excellent mechanical strength. No glues or binding agents are used in production, allowing maximum use of the activated carbon and ensuring better airflow. Each filter is sealed immediately after production to preserve the freshness and effectiveness of the activated carbon until use.

Thanks to its large capacity and airflow of 2500 m³/h, the model is suitable for large grow rooms, professional greenhouses and installations with powerful Ø250 mm extractors, where continuous operation and reliable odour control are required.

Technical specifications

✔️ Manufacturer: Vanguard Hydroponics

✔️ Series: Falcon

✔️ Type: Carbon filter for odour control

✔️ Maximum airflow: 2500 m³/h

✔️ Connection diameter: 250 mm

✔️ Length: 1100 mm

✔️ Activated carbon: RC412 – 100% Australian

✔️ Activation method: Steam activation at high temperature

✔️ Housing material: Aluminium

✔️ High-air-permeability outer mesh

✔️ No glues or binding agents used

✔️ Suitable for continuous operation

✔️ Compatible with Ø250 mm extractors

Benefits

✔️ Effectively eliminates unpleasant odours

✔️ Premium RC412 activated carbon with high absorption capacity

✔️ Excellent airflow with minimal resistance

✔️ Lightweight yet robust aluminium construction

✔️ No glues – maximum use of the filtering material

✔️ Suitable for professional high-airflow installations

✔️ Washable and replaceable pre-filter for a longer service life

✔️ Average service life of over 18 months under normal operating conditions (depending on humidity, dust levels and usage patterns).

📋 Installation and maintenance

• Install the filter before the extractor, so that the entire airflow passes through the activated carbon.
• Use an air duct with a diameter of 250 mm.
• Clean the pre-filter regularly to reduce dust build-up.
• Replace the filter with a new one when filtration efficiency decreases.

💡 Tip from Urban Botaniks: For maximum efficiency, choose a carbon filter with an airflow rating equal to or slightly higher than that of the fan. This ensures optimal filtration, a longer activated-carbon lifespan and better odour control.

Agrolite QB730 is professional LED lighting, designed to provide homogeneous and precise lighting in indoor cultivation environments. With its full-spectrum distribution and Balanced Impact Distribution (BID) technology, this lighting optimises the growth and flowering of plants, eliminating hot spots and providing even distribution of light.

Key features:

• Power: 730W
• Colour temperature: 3480 K
• PPF (Photon Flux): 2110 µmol/s
• Efficiency: 2.9 µmol/J
• Light angle: 120°
• Lifespan: 60,000 hours
• Dimensions: 1105 x 1033 x 48 mm
• Weight: 8.5 kg
• Recommended coverage area: up to 1.5 x 1.5 m
• Recommended installation height at 100% power:
  • Vegetative stage: 70-100 cm
  • Flowering stage: 40-60 cm
• Input voltage: 220 - 240 V / 50 - 60 Hz (with permitted variations of ±10%)
• Power settings: OFF / 40% / 60% / 80% / 100% / EXT (external control)
• Built-in dimmable driver system with two RJ11 ports for 0-10V dimming

Advantages:

• Uniform lighting: BID technology and strategically positioned LED chips provide even light distribution, preventing hot spots and optimising plant growth.
• Flexible control: The ability to adjust power and provide external control through 0-10V dimming allows lighting to be tailored to the needs of every growth stage.
• Long service life: With a lifespan of 60,000 hours, this lighting offers reliability and long-lasting performance.

Agrolite QB730 is an ideal choice for professional growers, who seek efficient and reliable lighting for their crops. With its high specifications and customisation options, it provides optimal conditions for plant growth and flowering.

LED Spider King 360W Vanguard Hydroponics

Take your growing to the next level with cutting-edge horticultural lighting! The LED Spider King 360W Vanguard Hydroponics is more than just a grow light – it is your best ally for increasing plant yields, even in the most demanding environments.

Why choose Spider King 360W Vanguard?

1. With an efficiency of 2.8 µmol/J and a photon flux of up to 972 µmol/s, this system optimises photosynthesis, encouraging healthy and vigorous growth. Equipped with a full spectrum and 120° uniform light distribution, it provides even coverage for your crops at just 30 cm height.
2. Designed for a 60 000-hour lifespan, its IP65 water resistance ensures reliable operation even in high-humidity conditions. Choose the ideal intensity for your plants with power settings from 40% to 100% or connect external automation devices. With dimensions of 599 x 582 x 48 mm and a weight of 4.2 kg, its compact design enables easy installation and maintenance.

• power: 360 W
• efficiency: 2.8 µmol/J
• coverage area: 100 x 100 cm
• light spectrum: full spectrum

Technical specifications:

• brand: Vanguard Hydroponics
• model: LED Spider King 360W 
• power: 360 W
• voltage: 220 - 240V
• PPF (photosynthetic photon flux): 972 µmol/s
• efficiency: 2.8 µmol/J
• coverage area: 100 x 100 cm
• light spectrum: full spectrum
• power control option: with a dimmer (included)
• operating modes :OFF / 100% / 80% / 60% / 40%
• built-in LED driver
• water resistance: IP65
• lifespan: 60 000 hours
• dimensions: 599 x 582 x 48 mm
• weight: 4.2 kg
• warranty: 2 years

Leef Kleen Precision Scissors Curved Tip are scissors with a curved blade for more convenient use.

• 100% stainless steel
• exceptionally sharp blades
• 100% premium handle rubber

Leef Kleen Precision Scissors Straight Tip are scissors with straight blades for more convenient use.

• 100%  stainless steel
• exceptionally sharp blades
• 100% premium handle rubber

LightHouse LITE Spare Plastic 4 Way Connector is a small but essential accessory for your gardening project. This connector is designed to provide a stable and secure connection between different components.

The LightHouse 6-tier drying rack ⌀ 75 cm can be hung up, allowing you to dry your herbs or spices.

• tiers: 6 pcs.
• diameter: ⌀ 75 cm
• option to detach the lower 2 x 2 tiers
• stabilising strap connecting each tier
• max. load: 21 kg / 3.5 kg per tier

Lion Rolling Transparent Paper 420 are unique transparent rolling papers made from 100% natural cellulose, offering a completely different experience. Thanks to their transparent design, they allow you to see the contents and the smoke, creating a striking visual effect.

This model features a large pack of 420 papers, making it exceptionally economical and suitable for long-term use.

The papers are ultra-thin and gum-free, sealing with a light touch of moisture. This provides a clean taste without unwanted flavours and minimal impact on the contents.

⚙️ Key features:

• ✔️ Type: Transparent papers (Cellulose Papers)
• ✔️ Composition: 100% natural plant cellulose
• ✔️ Fully transparent
• ✔️ Glue-free (sealed by moistening)
• ✔️ Quantity: 420 papers per pack
• ✔️ Size: approximately 72 x 35 mm
• ✔️ Slow and even burning
• ✔️ Biodegradable and eco-friendly

? Benefits:

• Unique transparent effect
• Cleaner taste without paper
• Natural and eco-friendly product
• Long-lasting use – large pack
• Ideal for lovers of the unconventional and modern

Lion Rolling Wrap BLUEBERRY are high-quality hemp wraps with a blueberry flavour, created for a more natural and enjoyable experience. Made from 100% natural hemp, they contain no tobacco or nicotine, making them a preferred choice for users seeking a cleaner product.

The wraps have an added sweet, fruity blueberry aroma that complements the contents without dominating them. They provide an even, slow burn thanks to their special structure and serrated edges for easier rolling.

The flexible, durable texture makes them easy to handle for both beginners and experienced users.

⚙️ Key features:

• ✔️ Type: Hemp wraps (Hemp Wraps)
• ✔️ Flavour: Blueberry (Blueberry)
• ✔️ Composition: 100% natural hemp
• ✔️ GMO-free and suitable for vegans
• ✔️ Number per pack: 2 wraps
• ✔️ Slow and even burning
• ✔️ Serrated edges for easy rolling

Lion Rolling Wrap GELATO are premium hemp wraps infused with natural Gelato terpene flavours, which provide a sweet, creamy and subtly citrus flavour.

Made from 100% natural Canadian hemp, they contain no tobacco, nicotine or chemical additives, making them an excellent choice for users seeking a cleaner, more natural experience.

Thanks to their high-quality material structure, the wraps provide an even, slow burn, while preserving the flavour of the contents.

The special serrated edges make rolling easier and ensure a better seal without glue.

⚙️ Key features:

• ✔️ Type: Hemp wraps
• ✔️ Flavour: Gelato (sweet, creamy, citrus)
• ✔️ Composition: 100% natural hemp
• ✔️ Tobacco- and nicotine-free
• ✔️ Glue-free (sealed by moistening)
• ✔️ Vegan product
• ✔️ Size: approx. 105 x 45 mm
• ✔️ Quantity: 2 wraps per pack
• ✔️ Serrated edges for easier rolling

? Benefits:

• Natural, chemical-free product
• Rich, contemporary Gelato flavour
• Slow, even burn
• Easy to use – do not tear
• Suitable for beginners and experienced users

Lion Rolling Wrap MANGO are high-quality hemp wraps with an exotic mango aroma, made for a more natural and enjoyable experience. Made from 100% natural hemp, they contain no tobacco, nicotine or additives, making them an excellent alternative to traditional wraps.

The wraps offer a light, sweet tropical flavour that complements the contents without overpowering them, for a balanced and pleasant sensation.

Thanks to their structure and material quality, they provide slow, even burning, allowing maximum enjoyment and control during use.

⚙️ Key features:

• ✔️ Type: Hemp wraps (Hemp Wraps)
• ✔️ Aroma: Mango (Mango)
• ✔️ Composition: 100% natural hemp
• ✔️ Tobacco- and nicotine-free
• ✔️ No additives or chemicals
• ✔️ Vegan product
• ✔️ Size: approx. 105 x 45 mm
• ✔️ Quantity: 2 wraps per pack
• ✔️ Serrated edges for easier rolling

? Benefits:

• Natural product without artificial additives
• Fresh tropical aroma
• Easy to work with – suitable for beginners and experienced users
• Do not negatively affect the flavour of the contents
• Slow, even burning

LUMATEK 600W 240V CONTROLLABLE BALLAST is a digital controllable ballast that can operate with both high-pressure sodium (HPS) and metal-halide (MH) lamps. It provides stable and precise voltage to the lamp, creating higher PAR/PPF output and is nevertheless far more energy efficient than most ballasts on the market! The ballast features intelligent start technology and a soft-dimming mechanism! It can be externally controlled with LUMATEK Control Panel Plus 2.0 (sold separately).

• Output power: 600W
• 4 operating modes: 250W - 400W - 600W - 660W
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• 5-year warranty!

An electronic ballast is a solution to the problem of irregular voltage in the power grid! Magnetic ballasts age over time, begin to make noise and consume more electricity, heat up more and more while their light output decreases. This does not happen with digital ballasts—they maintain the same level of output and efficiency. LUMATEK ballasts are programmed for “soft start”, meaning no voltage or current peak is required to start the lamp; this extends bulb life, does not overload the electrical installation and allows a larger number of ballasts to start safely at the same time.

Full technical specifications:

• Output power: 600W
• Input voltage: 240V, 50/60Hz
• Maximum current: 2.7A
• power factor*: > 0.99
• Efficiency: 96%
• THD*: < 8%
• Dimming capability / 4 operating modes: 250W - 400W - 600W - 660W
• Compatible with: 250W, 400W, 600W HPS / MH lamps
• Operating frequency: high frequency
• generates very little heat compared with other ballasts on the market
• operates silently
• Protection against short circuit, overheating, overvoltage / undervoltage, end of lamp life!
• Dimensions: 310 x 114 x 81mm
• Weight: 2.7kg
• warranty: 5 years

Operating instructions:

• For use with a 250W HPS or MH lamp: the ballast must be always and only in 250W mode!
• For use with a 400W HPS or MH lamp: the ballast must never be in 600W or 660W mode!
• For use with a 600W HPS or MH lamp: Start in 600W mode and only after the lamp has fully warmed up (after approximately 10min. of operation), can you switch to 660W mode!

1. Disconnect the power when changing the lamp!
2. LUMATEK recommends replacing the lamp after 6-12 months of operation!
3. VERY IMPORTANT: allow the lamp to cool completely (20-30min.) before switching it on again! (Doing otherwise shortens its life.)
4. Also, do not switch the lamp off before it has reached full power!

Lumatek Daisy-Chain 5m. Control cable is a daisy-chain cable for your controllable LUMATEK LED lighting fixtures, providing a stable, precise connection without interference.

• length: 5m

Instructions for use: Simply connect the self-locking M12 male plug to the Signal Out output and the self-locking M12 female plug to the Signal In input of the next lighting fixture.

Lumatek Zeus LED fixtures and LED accessories: vconnection options for the various models in English here*.

Technical / test data:

• length: 5m.
• The withstand voltage between conductor and insulation is 800 VAC, 2 mA, test time 60 S; no breakdown or leakage occurs.
• Temperature resistance: 80℃
• Operating temperature: -20 - 105℃
• Storage temperature: -25 - 105℃
• IP65 protection
• Complies with RoHS*

LUMATEK Digital Panel PLUS 2.0 (HID+LED) is a digital lighting controller that can control all LED light fixtures, drivers and Lumatek ballasts. Using innovative technology, this controller intelligently monitors room temperatures and the light cycle, and safely controls the dimming and switching on/off of the lighting.

• controls up to 400 ballasts or 100 LED drivers
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• compatible with all Lumatek ballasts: 315W, 600W, 630W and 1000W
• compatible with all Lumatek LED drivers: 90W, 120W, 465W, 600W and 1000W
• temperature sensor for monitoring and control
• automatic temperature regulation through dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• warranty: 3 years

Instructions for use: here* and here*

Lumatek Digital Panel Plus 2.0 is a dual-signal, dual-channel digital lighting controller. Each of its two channels (zones) can control up to 200 Lumatek ballasts or up to 50 LED fixtures. Each channel (zone) can control ballasts/drivers with the same wattage; Zone A can control ballasts/drivers with the same power supply as Zone B, or Zone B can be configured to control ballasts/drivers with a different wattage. For example, Zone A can control 600W LED fixtures, while Zone B can control 600W or 315W HID ballasts.

Features:

• controls up to 400 ballasts or 100 LED fixtures
• two control channels (Zone A and Zone B)
• up to 200 ballasts / 50 LED drivers per channel
• 24-hour lighting schedule and switching
• temperature sensor for monitoring and control
• dimming with up to ±1% accuracy
• automatic temperature regulation through dimming and switching for safety control
• simulates sunrise and sunset to reduce plant stress
• automated light-intensity control

Specifications:

• power supply: adapter 100 - 240V, 50/60Hz - DC 5V/2A
• compatible with all Lumatek ballasts: 315W, 600W, 630W and 1000W
• compatible with all Lumatek LED drivers: 90W, 120W, 465W, 600W and 1000W
• dimming range: 10% - 115%
• power dimming accuracy: 1%
• sunrise/sunset duration: 0-30 min
• dimensions: 125 x 80 x 25mm
• warranty: 3 years

Lumatek Dimmer Box 3-Pin PRO is an original manual dimmer designed to control compatible Lumatek LED lighting fixtures via a 3-pin control connector. It allows easy adjustment of light output in 25% – 50% – 75% – 100%, increments, without the need for an external controller. This is a practical solution for optimising light intensity throughout the different stages of plant development.

Lumatek Dimmer Box 3-Pin PRO was developed as an original accessory for Lumatek LED lighting systems. It connects directly to the 3-pin DIM port of compatible fixtures and enables fast, easy control of light intensity without the need for a digital control panel.

Using the mechanical switch, you can choose between several preset power levels—25%, 50%, 75% and 100%, allowing the lighting to be adapted to the plant development stage. Reducing light intensity is particularly useful during germination, rooting and early vegetative growth, when young plants do not need maximum light output.

The dimmer is compact, easy to install and requires no additional configuration. It simply connects to compatible LED lighting and is ready for use. It is suitable both as a replacement for the original dimmer and as a spare accessory.

Technical specifications

✔️ Manufacturer: Lumatek

✔️ Model: Dimmer Box 3-Pin PRO

✔️ Type: Manual dimmer for LED lighting

✔️ Connection: 3-pin connector

✔️ Power adjustment:

• OFF
• 25%
• 50%
• 75%
• 100%

Compatibility

Compatible with selected Lumatek LED lighting models, including:

✔️ Lumatek VF 90W LED

✔️ Lumatek VF 120W LED

✔️ Lumatek ATS 200W PRO (ATTIS)

✔️ Lumatek ATS 300W PRO 2.7-3.1

✔️ Lumatek ZEUS 465W Compact PRO

✔️ Lumatek ZEUS 465W PRO 2.3-3.1

✔️ Lumatek ZEUS 600W 2.3-3.1

✔️ Lumatek ZEUS 1000W 2.3-3.1

✔️ Other Lumatek models equipped with a 3-pin DIM input.

Benefits

✔️ Original Lumatek accessory

✔️ Easy adjustment of light output

✔️ Dimming levels: 25%, 50%, 75% and 100%

✔️ Plug & Play installation

✔️ No programming required

✔️ Compact and convenient to use

✔️ Suitable as a spare or replacement dimmer

✔️ Provides optimal light intensity for the different growth stages.

📋 Instructions for use

1. Disconnect the LED lighting fixture from the mains.
2. Connect the dimmer to the 3-pin DIM port of the lighting fixture.
3. Switch on the lighting fixture.
4. Select the desired power level—25%, 50%, 75% or 100%.
5. If necessary, adjust the intensity according to the plant development stage.

💡 Urban Botaniks tip: Use lower lighting levels (25–50%) during germination and rooting, increase to 75% during vegetative growth, and use 100% power during flowering, when plants have the highest light requirements.

Lumatek HPS Lamp 1000W 240V is a pulse-start sodium lamp designed to operate with the Lumatek 1000W 240V controllable ballast. It is suitable for growth / vegetative growth as well as the flowering phase. Manufactured using high-quality ceramic arc-tube technology, the lamp can operate at higher internal temperatures, increasing output and efficiency. Pulse-start technology enables faster start and restart times, longer lamp life and increased PAR / PPF output maintenance.

• for growth and flowering
• power: 1000W
• current: 10.3A
• luminous flux: 130 000 lm
• efficacy: 130 lm/W
• PPF: 1850 μmol/s
• efficacy: 1.85 μmol/s
• colour temperature: 2000K
• lifespan: 24 000h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Lumatek HPS Lamp 250W 240V is a pulse-start* high-pressure sodium bulb / lamp, suitable for both growth / vegetative growth and the flowering phase. It is made from durable PCA ceramic, which allows the lamp to operate at higher internal temperatures, increasing output and efficiency. Pulse-start technology enables faster start-up and restart, longer lamp life and improved lumen maintenance.

• for growth and flowering
• power: 250W
• current: 3.0A
• luminous flux: 33 000 lm
• efficacy: 132 lm/W
• PPF: 400 μmol/s
• colour temperature: 2000 K
• lifespan: 28 000 h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

Lumatek HPS Lamp 600W 400V is a pulse-start* sodium lamp suitable for growth / vegetative growth as well as flowering. 400V HPS lamps are more efficient than standard HPS lamps and therefore offer a 10% increase in light intensity and PAR / PPF output. Made using high-quality ceramic arc tube technology, the lamp can operate at higher internal temperatures, increasing power and efficiency. The pulse-start technology enables faster start and restart times, longer lamp life and increased PAR / PPF maintenance.

• for growth and flowering
• power: 600W
• current: 3.6A
• luminous flux: 90 000 lm
• efficacy: 150 lm/W
• PPF: 1100μmol/s
• efficacy: 1.83 μmol/s
• colour temperature: 2000K
• life: 24 000h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

• Light spectrum: full spectrum +
• High efficacy: up to 2.5µmol/J
• PPF: 508µmol/s
• power (100%): 205W
• Coverage area: up to 0.8 x 0.8m
• Waterproof: IP65
• Lifespan: + 60 000 hours
• Light source: high-quality white, red and far-red diodes
• Five operating modes: OFF, 25%, 50%, 75%, 100% with 0-10V dimmer (included)
• Dimensions: 524.5 x 524.5 x 71.6mm
• Weight: 4kg
• Warranty: 3 years