Products

Lumatek MH Lamp 250W 240V is a pulse-start* metal halide bulb for growth / vegetative growth. It is made from durable  quartz, allowing the lamp to operate at higher internal temperatures, increasing power and efficiency. Pulse-start technology enables faster start-up and hot restrike times, a longer lamp life and increased PAR / PPF maintenance.

• for growth
• power: 250W
• Current: 3.0A
• lifespan: 10 000 hrs
• Luminous flux: 21 000 lm
• Colour temperature: 4200K
• Efficiency: 84 lm/W
• PPF: 323μmol/s
• power supply: 240V, 50Hz
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

Lumatek MH Lamp 400W 240V is a pulse-start* metal halide lamp for growth / vegetation. It is made from durable quartz, allowing the lamp to operate at higher internal temperatures and increasing power and efficiency. Pulse-start technology enables faster start and restart times, longer lamp life and increased PAR / PPF output maintenance.

• for growth
• power: 400W
• current: 4.6 A
• life span: 10 000 h
• luminous flux: 35 000 lm
• colour temperature: 6000 K
• efficiency: 88 lm/W
• PPF: 500μmol/s
• power supply: 240V, 50Hz
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

Lumatek power cable with EU plug

Lumatek VF650W LED driver is a power driver for VF series lighting units: VF (Lumatek LED VF 90W and Lumatek LED VF 120W).

 

• can power up to 7 VF90 or up to 5 VF120 simultaneously
• can be switched off or dimmed using a standard 0-10V dimmer (sold separately)
• operating temperature: -20º - +40ºC
• operating humidity: 20% - 90%
• Water resistance: IP65
• dimensions: 230 x 120 x 50 mm
• weight: 2.0 kg
• warranty: 3 years

The driver is intended for indoor grow rooms with a controlled climate. It may be used in environments with humidity up to 90%, but must not be used in a more humid environment or outdoors!

 

Technical specifications:

 

• can power up to 7 VF90 or up to 5 VF120 simultaneously
• can be switched off or dimmed using a standard 0-10V dimmer (sold separately)
• operating temperature: -20º - +40ºC
• operating humidity: 20% - 90%
• Water resistance: IP65
• dimensions: 230 x 120 x 50mm
• weight: 2.0kg
• weight with packaging: 4.7kg
• warranty: 3 years

Lumatek Zeus 465W PRO 2.9 is a complete LED lighting kit that, with its PPF of 1353µmol/s and efficacy of 2.9µmol/J, may be one of the best products currently available on the market. Its balanced full spectrum makes it ideal and sufficient for use throughout all stages of plant development - from germination and seedlings to cloning or vegetative growth, right through to the end of the flowering period for indoor-grown crops.

 

Why Lumatek LED:

1. Save up to 40% on electricity because less heat is generated in the space, reducing the need for cooling.
2. Gardeners growing with LED lighting notice improved crop quality as well as a higher final yield.
3. Guaranteed for 60 000h of operation and covered by a 5-year warranty.

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1353µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Lifespan: 60 000 hours
• Light source: Osram and LUMLED diodes
• Fully dimmable: OFF, 25%, 50%, 75%, 100%
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

As technology advances, high-quality LED horticultural lighting is now a reliable option for growers, offering a significant return on investment. Lumatek full-spectrum LED products balance light quality (spectra) with quantity (intensity and duration) sufficiently to provide a single-source lighting solution for the entire growing cycle - from vegetative growth through to flowering.
The linear layout of the LEDs creates even light distribution at a short distance from the crop, allowing single-source lighting for multi-tier growing systems, single benches in low rooms and grow tents.
Zeus is built using high-quality Lumatek drivers and top-tier Osram and LUMLED LEDs, producing full-spectrum light ideal for vegetative and flowering cycles.
For the different stages of the plant - germination, seedling or vegetative growth - the power of the Lumatek Zeus 465W COMPACT PRO 2.9 can be adjusted without losing efficiency. The highly efficient, low-powered LED configuration with five 93W LED bars lowers LED temperature, increasing output and improving light maintenance.

 

Technical specifications:

 

• Balanced full-spectrum light
• High efficacy: 2.9µmol/J
• PPF: 1353µmol/s
• Power consumption: 465W
• Coverage area: 1.2 x 1.2m.
• Light distribution: 120°
• Lifespan: 60 000 hours
• Light source: Osram and LUMLED diodes
• Fully dimmable with 0-10V light dimmer (included): OFF, 25%, 50%, 75%, 100%
• Waterproof: IP65
• Input voltage: 200-240V, 50-60Hz
• Dimensions: 998x900x51.9mm.
• Weight: 11kg.

Full instructions for use: here*

 

Full technical specifications: here*

LUMii AeroTube 125 mm is the latest air-cooled reflector. When used together with ducting and a fan, this innovative product allows air to flow through the reflector, helping to control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Supplied with a 4 m IEC cable
• Recommended wattage: up to 400W
• ∅ 125 mm.

LUMii AeroTube 150mm. is the latest air-cooled reflector. When used together with ducting and a fan, this innovative product allows air to flow through the reflector, helping to control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Includes a 4m IEC cable
• Recommended power: up to 600W
• ∅ 150mm.

LUMii AeroTube 200mm. is the latest air-cooled reflector. When used with ducting and a fan, this innovative product allows air to flow through the reflector, helping control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Includes a 4m IEC cable
• Recommended wattage: up to 1000W
• ∅ 200mm.

LUMii BLACK 600W Electronic Ballast is an electronic/digital ballast with "dimming" capability (reducing or increasing power) for 600W high-pressure sodium (HPS) or metal-halide (MH) lamps/bulbs.

 

• 4 operating modes: 250W, 400W, 600W, 600W boost (+10%)
• aluminium housing suitable for wall mounting.
• cable with Schuko plug for connection to the mains
• IEC connector (computer type) for connecting the lamp
• Voltage: 240V
• Current: 2.9A
• Power cable: 2m
• Dimensions L/W/H: 29/12/6cm
• Weight: 3kg
• Warranty: 1 year

 

The electrical fuse is located beneath the power socket — please check the fuse if the ballast is not working!

 

• operating modes with a 600W lamp/bulb: 250W, 400W, 600W, 600W boost (+10%)!
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W

 

Disconnect the power when changing the lamp!

LUMii BLACK Blade 100W LED is a high-performance LED lighting system designed to provide optimal light for plants during the growth stage.

LUMii BLACK Blade 100W LED is a compact, economical and productive LED alternative to T5, CFL or 250 W metal-halide lamps. Providing full-spectrum white light with enhanced blue output, it is ideal for vegetative growth and propagation. (Not recommended for flowering and fruiting stages.) The fixture is large enough to illuminate an entire propagation tray and small enough to use in a LightHouse cloning tent. It is powered directly from the mains via the supplied 2 m power cable and includes hanging straps for easy installation. Technical specifications: Input power 100 W. Input voltage 100 - 277 V AC / 50 - 60 kHz. Input current 1 A at 100 V, 0,36 A at 277 V. Efficacy 2,6 µmol/J @ 220 V AC. PPF 260 µmol/s. Beam angle 120°. Protection rating IP65. Dimensions: 215 mm x 425 mm x 92 mm (8,5" x 16,7" x 3,6"). Weight 2 kg (4,4 lb). Operating ambient temperature and humidity: 0° C - 40° C (32° F - 104° F). Maximum relative humidity 95%. Storage temperature and humidity: -40° C - 70° C (-40° F - 158° F). Maximum relative humidity 85%.

LUMii BLACK 600W HPS Lamp is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• luminous flux: 88 000 lm
• efficiency: 147 lm/W
• colour temperature: 2000 K
• service life: 20 000 h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Recommendations:

• Connect to the mains using a suitable ballast.
• Place at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

LUMii Black LED Bar 30W UV/FR is a specialised LED lamp designed to supplement the main lighting in your indoor garden with important ultraviolet (UV) and far-red (FR) spectra. LUMii Black Bar 30w UV/FR LED is a simple bar-shaped LED lamp that provides supplementary ultraviolet and infrared light to extend the light spectrum provided by other light sources. It is designed to connect to the LUMii Black Blade 400w LED fixture, but can also be used alongside any other full-spectrum grow light to increase crop yield and quality, stimulate growth and support flowering. It plugs in and operates with its own power cable; we recommend controlling it with a timer and using it for about 2 hours a day during the photoperiod. USPs: Adds UVA rays (385 nm) to the grow-light spectrum Adds infrared wavelengths (730 nm) to the grow-light spectrum Fits directly onto the LUMii Black Blade 400w LED Can be used as supplementary lighting with any other grow lighting Powered directly from the mains Technical specifications: Power 30 W ± 5 % Input voltage 100-277 V AC / 50-60 kHz Input current 0,3 A at 100 V, 0,11 A at 277 V Output 56,60 umol/s - wavelength 200-800 nm Chips 385 nm and 730 nm Light beam angle 120° Protection rating IP65 Dimensions Length 605 mm (23,82") Width 57 mm (2,24") Depth 31 mm (1,21") Weight 0,85 kg / 1,87 lb Operating ambient temperature and humidity 0°C - 40°C (32°F - 104°F). Maximum relative humidity 95% Storage temperature and humidity -40°C - 70°C (-40°F - 158°F). Maximum relative humidity 85%

The LUMii BLACK Reflector includes:

 

•  5m cable 
•  E40 lamp holder

 

Dimensions:

 

• Height: 130mm 
• Width: 380mm
• Length: 510mm

LUMII Cord Set with a 4 m cable is a high-quality, versatile power set designed for convenient and safe connection of your lighting systems. This set includes a standard E40 lampholder and a 4-metre power cable, providing ample length for maximum installation flexibility. The E40 lampholder is compatible with many lamp types, including sodium and metal-halide lamps, making it versatile for different applications. LUMII Cord Set is made from high-quality materials that ensure years of use and exceptional reliability. The cable has wear- and heat-resistant insulation that protects the conductors and ensures safe operation. Installation is quick and easy thanks to the integrated metal bracket for securing the cable to the reflector. Whether you are a beginner gardener or a professional grower, this set helps you install and power your lighting systems with ease and confidence. Overall, the LUMII Cord Set with a 4 m cable is an indispensable part of any lighting system, offering quality, reliability and convenience you can rely on.

LUMii Digita 1000W Electronic Ballast is an electronic/digital ballast with dimming capability (reducing or increasing power) for 1000W high-pressure sodium (HPS) or metal-halide (MH) lamps. LUMii Digita 1000W Electronic Ballast is an electronic ballast with a built-in microprocessor that controls and operates at a higher frequency than standard analogue ballasts. Higher efficiency means more light for your plants. It enables rapid lamp ignition, saving energy. Quieter than any other ballast. Measurements indicate up to 30% more brightness than analogue ballasts. The electronic ballast solves the problem of irregular mains voltage. Analogue ballasts age over time, become noisy, consume more electricity and heat up more while their light output decreases. This does not happen with electronic ballasts: they maintain the same emission level and efficiency. For safe operation, the LUMii ballast is programmed to switch off in case of a short circuit, lamp failure or a missing lamp.

 

​

• Operating modes with a 1000W lamp: 250W, 400W, 600W, 1000W
• Operating modes with a 600W lamp: 250W, 400W, 600W, do not dim above 600W!
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W
• Supply voltage: 220–240V 50Hz
• Current: 4.6A
• ​Dimensions L/W/H: 48/39.5/24.5 cm
• Weight: 5.2 kg
• Warranty: 1 year

 

Disconnect the power when changing the lamp!

LUMii Digita 600W Electronic Ballast is an electronic/digital ballast with the ability to dim (reduce or increase power) 600W high-pressure sodium (HPS) or metal-halide (MH) lamps. LUMii Digita 600W Electronic Ballast is an electronic ballast with an integrated microprocessor that controls and operates at a higher frequency than standard analogue ballasts. Higher efficiency means more light for your plants. It enables rapid lamp ignition, saving energy. Quieter than any other ballast. Measurements show up to 30% more brightness than analogue ballasts. The electronic ballast solves irregular mains voltage issues. Analogue ballasts age, become noisy, consume more electricity and get hotter while light output drops. Electronic ballasts do not do this; they maintain the same output and efficiency. For safe operation, the LUMii ballast is programmed to switch off in the event of a short circuit, lamp failure or no lamp fitted.

 

​

• operating modes with a 600W lamp: 250W, 400W, 600W
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W
• Supply voltage: 220–240V 50Hz
• Current: 1.8A
• Input power: 620W
• Output power: 600W
• Power factor: >0.99 THD
• Non-linear distortion: <10%, Imax:Iavg. <1,7
• Ambient temperature: from -25°C to 70°C
• Heating (Δt): 29°C
• Protection class: >IP23
• ​Dimensions L/W/H: 43/38/18.5 cm
• Weight: 3.125 kg

 

Disconnect the power when changing the lamp!

LUMii Green LED Head Torch is a head torch with green light, ideal for checking your garden without interrupting the photoperiod (the plants’ dark period).

 

• Three operating modes – full, partial and strobe (flashing light)
• 6 green LEDs
• Operates on 3 AAA batteries (not included)
• Compact and lightweight design

LUMii protective glasses for observing under HPS lighting. In addition to protecting your eyes, they make it easier to identify early signs of nutrient deficiencies or pest infestation without having to switch off the lights. LUMii protective glasses have a specially developed blue lens that corrects the orange tint of sodium lamps and creates the impression of natural daylight. This allows you to observe the true colours of your plants—leaves, fruits and flowers.

 

• protect the eyes from ultraviolet (UV) and infrared (IR) rays
• normalise the spectrum

LUMii SOLAR 315W CMH FIXTURE lighting kit, which includes:

 

• Electronic ballast + reflector

LUMii SOLAR PRO 315W CDM Lamp is a latest-generation ceramic discharge metal-halide (CDM), or ceramic metal-halide (CMH), lamp. This technology offers an enhanced light spectrum, as close as possible to natural sunlight and up to 20% greater efficiency than high-intensity discharge (HID) lamps. LUMii SOLAR PRO 315W emits light with a colour temperature of 3200K and is ideal for use throughout all stages of plant development – from germination and seedlings to cloning or vegetative growth, right through to the end of flowering.

 

• for all stages of plant development
• power: 315W
• light output: 37 800lm
• colour temperature: 3200K
• lifespan: 20 000h
• lamp base: PGZ18
• starting: connects to a special adapter* and ballast* (sold separately)

 

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!