Products

Ona Gel Tropics 400g does not merely neutralise unwanted odours from every source; it eliminates them completely — permanently and effectively. Its patented formula of natural essential oils makes it the best and best-selling product on the market!

• with a tropical-fruit fragrance
• suitable for the home, kitchen, car, around the bin and more.
• antibacterial, antifungal and antiseptic action

Directions: Shake well! Remove the cap and protective foil, then place it in the desired location. Ona Gel will release its powerful odour-neutralising agent, leaving a fresh fragrance in the room.

Duration: From 30 to 90 days after opening, depending on temperature and air movement. For larger rooms, use larger Ona Gel pack sizes.

Use only as intended! Keep out of reach of children! Contains terpenes and terpenoids! May cause allergic reactions!

Opticimate 15000 PRO3 is a water-cooled air conditioner that cools air using water and heats it through ceramic heaters. This is a standalone climate-control system that perfectly controls the indoor climate, using the least possible energy. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, which raises the water temperature from 35°C to 50°C. This hot water is then drained through the water outlet or recycled.

• functions for: cooling, heating, dehumidifying (dehumidifier), circulating and filtering the air.
• power consumption 400V: 3100W
• phases: 3
• cooling capacity: 15kW
• dehumidifies: 270l (per 24h)
• water consumption: 5-9l/min
• 3 x 2700W ceramic heaters
• dimensions: 121 x 70 x 54cm
• weight: 160kg
• warranty: 1 year

PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored simultaneously.

Why choose OPTICLIMATE?

This is ideal for cooling properties near water sources such as canal houses, floating houses, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings where an outdoor unit cannot be installed. If your house has a swimming pool, you can use water-cooled OptiClimate to cool your house and heat the pool.

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dries the air. If necessary, using the included hydrostat, OptiClimate can also dry the air in the night setting, thereby reducing humidity.

• OptiClimate dries the air by continually finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

SAFE AND SECURE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. OptiClimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel enclosure.
3. OptiClimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*

OptiClimate 10000 PRO3 is a water-cooled air conditioner that cools the air using water and heats it with ceramic heaters. It is a self-contained climate-control system that perfectly controls the indoor climate while consuming as little energy as possible. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, raising the water temperature from 35°C to 50°C. This hot water is then discharged through the water outlet or recycled.

• functions for: cooling, heating, air drying (dehumidifying), circulation and filtration of the air.
• power consumption 230-400V: 2150W
• cooling capacity: 10kW 
• dehumidifies: 170L (per 24h)
• water consumption: 3-6L/min
• 3 x 2000W ceramic heaters
• dimensions: 115 x 56 x 50cm 
• weight: 120kg
• warranty: 1 year

Why choose OPTICLIMATE?

This is ideal for cooling properties near water sources such as canal houses, floating houses, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings where an outdoor unit cannot be installed. If your house has a swimming pool, you can use water-cooled OptiClimate to cool your house and heat the pool.

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dries the air. If necessary, using the included hydrostat, OptiClimate can also dry the air in the night setting, thereby reducing humidity.

• OptiClimate dries the air by continually finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

SAFE AND SECURE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. OptiClimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel enclosure.
3. OptiClimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*

OptiClimate 3500 PRO3 is a water-cooled air conditioner that cools the air using water and heats it with ceramic heaters. It is a self-contained climate-control system that perfectly controls the indoor climate while consuming the least possible energy. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. This hot water is then discharged through the water outlet or recycled.

• functions for: cooling, heating, dehumidifying (dehumidifier), air circulation and air filtration .
• power consumption at 230V: 740W
• cooling capacity: 3.5kW (for 6 x 600 HPS)
• dehumidifies: 55L (per 24 h)
• water consumption: 1-2L/min
• 2 x 1500W ceramic heaters
• flange diameter: ⌀ 250mm (1 pc included)
• dimensions: 100 x 50 x 42cm
• weight: 57kg
• warranty: 1 year

Why choose OPTICLIMATE?

This is ideal for cooling properties near water sources, such as canal houses, houseboats, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for use in historic buildings, where an outdoor unit cannot be installed. If your house has a swimming pool, you can use the water-cooled OptiClimate to cool your house and heat the pool.

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dries the air. If necessary, using the included hydrostat, OptiClimate can also dry the air in the night setting, thereby reducing humidity.

• OptiClimate dries the air by continually finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

SAFE AND SECURE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. OptiClimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel enclosure.
3. OptiClimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*

OptiClimate 6000 PRO3 is a water-cooled air conditioner that cools the air using water and heats it using ceramic heaters. This is a self-contained climate system that perfectly controls the indoor climate, using the least possible energy. OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. Cold water is used to cool the air, which raises the water temperature from 35°C to 50°C. This hot water is then discharged through the water outlet or recycled.

• functions for: cooling, heating, dehumidifying (dehumidifier), circulating and filtering the air.
• power consumption 230-400V: 1450W
• cooling capacity: 6.0kW (for 10 x 600 HPS)
• dehumidifies: 100L (per 24h)
• water consumption: 2-4L/min
• 3 x 1500W ceramic heaters
• flange diameter: ⌀ 250mm (1 pc. included)
• dimensions: 115 x 53 x 43cm
• weight: 80kg
• warranty: 1 year

Why choose OPTICLIMATE?

This is ideal for cooling properties near water sources such as canal houses, floating houses, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is perfect for historic buildings where an outdoor unit cannot be installed. If your house has a swimming pool, you can use water-cooled OptiClimate to cool your house and heat the pool.

• PRO3 comes with an included remote control (controller), which allows all processes to run fully automatically and be monitored at the same time. Once the minimum temperature (night mode) and maximum temperature (day mode) have been set using the remote control, OptiClimate will heat or cool according to the night or day setting, ensuring that the preset temperatures are not exceeded. The night or day setting is controlled by a light sensor. In the day setting (cooling), OptiClimate also dries the air. If necessary, using the included hydrostat, OptiClimate can also dry the air in the night setting, thereby reducing humidity.

• OptiClimate dries the air by continually finding the right balance between heating and cooling. This allows the dehumidification function to operate even after the desired temperature has been reached. OptiClimate's dehumidification capacity is more than sufficient for most applications. It is one and a half to two times more effective than a construction dehumidifier.

SAFE AND SECURE CLIMATE CONTROL! 

1. The built-in temperature safety switch ensures that the lights switch off if the set maximum temperature is exceeded, for example when the water supply is disrupted.
2. OptiClimate is fire-safe because all electrical components, including the heating and connections, are installed in a steel enclosure.
3. OptiClimate has an alarm output that can be used to send an SMS alert in the event of a malfunction.

Instructions for use in English: here*

Connect ducts easily to your OptiClimate with this plenum box!

The OptiClimate plenum box has a sturdy insulated casing and is fitted to the rear of your OptiClimate 3500 PRO3 climate system. It allows you to install OptiClimate outside the grow room. If you connect it to a 3-way non-return valve*, you can use your OptiClimate in two separate rooms.

• allows the OptiClimate climate system to be installed outside the grow room
• can be used to divide one OptiClimate climate system between two separate rooms
• compatible with OptiClimate 3500 PRO3
• four perforated openings for easy duct attachment
• dimensions: 60 x 50cm
• opening diameter: ⌀ 250mm

Connect your air ducts easily to your OptiClimate with this plenum box!

The OptiClimate plenum box has a durable insulated housing and is fitted to the rear of your OptiClimate 6000 PRO3 climate system. It allows you to place the OptiClimate outside the grow room. If connected to a 3-way non-return valve*, you can use your OptiClimate in two separate rooms.

• allows the OptiClimate climate system to be installed outside the grow room
• can be used to divide one OptiClimate climate system between two separate rooms
• compatible with OptiClimate 6000 PRO3
• four perforated openings for easy air-duct attachment
• dimensions: 48 x 40cm
• opening diameter: ⌀ 250mm

Price per metre, 1.37m x 1m - 30 BGN

Price per roll, 1.37m x 10m - 210 BGN

The reflective film is made from high-density nanofibres interwoven into a surface with unique properties: high reflectivity in every direction and across every part of the spectrum. ORCA reflects light in the same way snowflakes do — although they are transparent themselves, together they form an even white surface.

ORCA Reflective Film

• DIFFUSE SURFACE - the microfibre surface distributes light evenly in all directions. This eliminates uneven lighting ("hot spots"), even if the reflective surface is not taut.
• HIGH REFLECTIVITY - 94% reflection across the entire visible-light spectrum. ORCA Grow Film is the best reflective material. Replacing old reflective film with ORCA can improve efficiency by 30-75%.
• REFLECTS HEAT - it also reflects infrared rays, retaining heat in the room.
• 100% LIGHTPROOF, DOES NOT ALTER THE SPECTRUM - the reflected light retains its spectral characteristics, so you get the most from your lamps.
• DURABLE and STRONG. Does not crease.
• WATERPROOF, WASHABLE, UV-PROTECTED AND DURABLE - blocks harmful ultraviolet radiation (<400nm) and remains unchanged when exposed to UV rays.
• Does not contain chlorine, plasticizers or volatile substances.

Made in Canada.http://www.orcagrowfilm.com/

Balanced organic fertiliser for healthy, vigorous growth of vegetables, fruit trees, flowers and shrubs.

• Multi-purpose
• Organic composition
• Easy to use

Organic Garden Focus is an excellent, multi-purpose organic fertiliser created to support the healthy, vigorous growth of your plants. With a balanced nutrient solution, it is suitable for any garden and all types of vegetables, fruit trees, flowers and shrubs.

• Multi-purpose: Provides the nutrients needed for optimal plant development.
• Organic composition: Supports ecological balance and soil health.
• Easy to use: Suitable for beginner and experienced gardeners.

🔹 Organic Tomato Focusе high-quality organic liquid fertilizer, specially developed to stimulate healthy growth and abundant fruiting of tomatoes, as well as other fruiting vegetables such as cucumbers, courgettes, peppers, and aubergines. Its formula is enriched with seaweed (Ascophyllum nodosum), humic and fulvic acids, which improve plant metabolism and increase resistance to stressful conditions.

🔹 Detailed specifications:

• Manufacturer: Growth Technology (United Kingdom)
• Quantity: 1 litre
• Composition: 100% plant-based raw materials approved for organic and vegan cultivation
• NPK values: 4.0% N (total nitrogen), 1.0% P₂O₅ (phosphorus oxide), 6.0% K₂O (potassium oxide)
• Additional ingredients: Molasses, humic and fulvic acids, seaweed (Ascophyllum nodosum)
• Use: Suitable for all growth stages of tomatoes and other fruiting vegetables
• Origin: United Kingdom

🔹 Recommendations and directions for use:

• For seedlings and young plants: 5 ml per litre of water - apply 1-2 times per week.
• For flowering and fruiting: 10 ml per litre of water - apply 1-2 times per week.
• Application: Shake well before use. Apply the solution around the root zone, avoiding contact with the leaves and fruit.

✅ Benefits of use:

• Improves fruit flavour: The molasses in the formula contributes to a sweeter, richer tomato flavour.
• Increases yields: The enriched formula stimulates abundant fruiting and healthy growth.
• Supports plant health: Seaweed and humic acids improve resistance to stress and disease.
• Suitable for organic cultivation: 100% plant-based composition approved for organic and vegan cultivation.

Osram Plantastar 600W is a dual-spectrum sodium / HPS bulb / lamp suitable for both growth /vegetative growth and the flowering stage.

• for growth and flowering
• power: 600W
• current: 6.06A
• luminous flux: 90 000 lm
• efficacy: 150 lm/W
• PPF: 1100 µmol/s
• efficacy: 1.8 µmol/s
• colour temperature: 2000 K\n
• life: 20 000 h\n
• socket: E40\n

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Detailed specifications: here*

Recommendations:

• Connect to the mains using a suitable ballast.
• Position at least 60 cm away from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!