Products

ATAMI COCOS is a high-quality coco substrate designed for growing plants in soil or hydroponic systems. It provides an excellent balance between moisture retention and aeration, supporting rapid root development. It is suitable for both beginners and experienced growers.

Composition: 100% coconut fibres, washed, steamed and buffered for an optimal growing environment

Structure: high porosity, providing good air circulation and preventing excess water retention around the roots

Usage recommendations:

• Ready-to-use coco substrate; no soaking in water required.
• Use nutrient solution regularly, as coco does not retain nutrients long term.
• For optimal results, monitoring pH and EC is recommended; you can find suitable instruments here*

Wilma 16

Hydroponic system Wilma 16 is a lightweight, easy-to-use and easy-to-carry hydroponic system. Pots of 6,5, 11 or 18 litres can be placed in each 4/8/10/16/20 tray. This gives plants sufficient space for optimal development. The Wilma growing systems are lightweight, easily portable and stable, allowing plants to remain upright even when fully grown. Wilma growing systems are specially designed for professional gardeners! For 16 plants, 1 sq/m. Suitable for use with mineral wool, expanded clay, coco or soil!

Dimensions: 115cm length x 115cm width x 20cm height 

Reservoir volume: 150 litres.

Wilma 20

The hydroponic system Wilma 20 is lightweight, user-friendly and easy to move. Pots of 6.5, 11 or 18 litres can be placed in each 4/8/10/16/20 tray. This gives plants sufficient room for optimal development. Wilma growing systems are lightweight, portable and stable, allowing plants to remain upright even once fully grown. Wilma growing systems are specially designed for professional growers! For 20 plants per 1 m². Suitable for use with rockwool, clay pebbles, coco or soil!

Dimensions: 119 cm length x 117 cm width x 48 cm height

Reservoir volume: 140 litres.

Wilma 4

The Wilma four-pot system is a drip irrigation system suitable for use with any substrate, whether soil, coco or expanded clay. It is ideal for beginners as well as experienced growers. Drip-feed systems provide better results than traditional hand watering because plants have continuous access to the nutrients they require. The four-pot system uses a 30-litre reservoir with 4 eleven-litre pots, although 3-litre air pots or other suitable alternatives can also be used. The system measures 69 cm long x 58 cm wide x 43 cm high when used with the standard pots.

• Standard inline filter for all AutoPot systems.
• Filters water from the reservoir before it reaches the irrigation system.
• Suitable for all FlexiTank sizes. 
• An essential part of all irrigation systems.

AutoPot 1Pot Accessory Pack is an original set of spare and expansion components for AutoPot 1Pot systems with a 6 mm pipe system. The set includes the latest-generation AQUAvalve5, together with all essential parts needed to replace worn components or add another watering point to an existing AutoPot system.

AutoPot 1Pot Accessory Pack is a practical solution for maintaining and expanding AutoPot systems. Whether you wish to replace worn components or add another pot to an existing installation, this set contains all the essential elements needed to connect and operate a new module correctly.

At the heart of the set is the AQUAvalve5 – AutoPot's latest-generation automatic valve. It regulates the supply of water and nutrient solution to plants without electricity, pumps or timers. Thanks to its gravity-fed operating principle, the valve delivers water only when plants need it, allowing the growing medium to go through natural wetting and drying cycles.

The set also includes the Root Control Disc, which prevents roots from reaching the valve, and the Matrix Disc, which provides even water distribution at the base of the pot. The included tubing, connectors and grommet allow quick connection to the existing 9 mm AutoPot system.

All components are original AutoPot spare parts, made for full compatibility with 1Pot systems using 6 mm tubing.

Technical specifications

✔️ Manufacturer: AutoPot

✔️ Type: AutoPot 1Pot accessory pack

✔️ Compatibility: AutoPot 1Pot (9 mm)

✔️ Valve: AQUAvalve5

✔️ Pipe size: 9 mm

✔️ Original AutoPot replacement components

✔️ Suitable for system expansion or repair.

📦 The kit includes

✔️ 1 × AQUAvalve5

✔️ 1 × Matrix Disc

✔️ 1 × Root Control Disc

✔️ 1 × 6 mm pipe (1 m)

✔️ 1 × 6 mm T-connector

✔️ 1 × 16–6 mm cross connector

✔️ 1 × 6 mm Top Hat seal (rubber grommet)

✔️ Installation instructions.

Benefits

✔️ Original AutoPot components

✔️ Includes the new-generation AQUAvalve5

✔️ Easy installation without specialised tools

✔️ Suitable for system repair and expansion

✔️ Ensures reliable operation of the gravity-fed irrigation system

✔️ Compatible with all AutoPot 1Pot systems with 9 mm pipework

✔️ High-quality, long-lasting components.

Application

Suitable for:

• AutoPot 1Pot systems

• Replacement of worn components

• Expansion of existing AutoPot installations

• Automatic gravity-fed irrigation

• Home and professional plant growing.

📋 Instructions for use

1. Turn off the water supply to the AutoPot system.
2. Install the AQUAvalve5 in the relevant tray according to the instructions.
3. Place the Root Control Disc and Matrix Disc at the bottom of the pot.
4. Connect the supplied 6 mm pipe to the existing irrigation line using the included connectors.
5. Check all connections for a proper seal.
6. Fill the reservoir and test system operation before placing the plants.

⚠️ Important: The kit is intended for AutoPot 1Pot systems with 6 mm pipework. Before purchasing, check which type of pipe system you use to ensure full compatibility.

💡 Urban Botaniks tip: When replacing the AQUAvalve, it is advisable to replace the Root Control Disc at the same time, especially if the system has operated for several seasons. This will ensure trouble-free operation and prevent roots from reaching the valve.

The AutoPot 1Pot XL system is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of flowers and foliage due to the unique action of the AQUAvalve valve, which is designed to allow the plant to go through a wet and dry cycle.

All AutoPot products work:

• WITHOUT ELECTRICITY
• WITHOUT PUMPS
• WITHOUT TIMERS

Gravity pressure is all that is required from the water reservoir or barrel. The systems are undoubtedly among the easiest to use and can be left unattended for weeks, thanks to the ability of the AQUAvalve valve to deliver everything the plant requires.

Developed by AutoPot to meet the needs of ambitious growers, with a huge capacity of 25 litres, the AutoPot 1Pot XL system is ideal for growers who want to cultivate large plants and achieve even greater yields. This original design has a clam-shaped tray that accommodates the large 25-litre pot. The pot's round base allows the grower to easily rotate a large plant while the pot is still in the tray. Ideal for large plants such as blueberry bushes or Japanese maple, the AutoPot 1Pot XL system can be used as a standalone system or connected to larger reservoirs to create extensive systems of any size or configuration. The AutoPot 1Pot XL system is supplied with all necessary fittings and an AQUAvalve valve, which control the water supply to every plant in the system, ensuring fresh, balanced nutrition throughout their life cycle.

The AutoPot 1Pot XL system is easily expandable, as many pots can be connected to one reservoir. Please see examples of typical layouts using 6mm or 16mm pipe. The pots and trays can easily be moved as desired; if plants become too large, they can be spaced farther apart with ease. Once assembled and connected to a reservoir filled with nutrient solution, this exceptionally versatile system will take care of all your needs.

All you need to do is remember to refill your reservoir from time to time. Reservoirs and filters are sold separately.

The AutoPot 1Pot XL system includes:

• 1x 1Pot XL tray and lid
• 1x 25L pot
• 1x 6 mm built-in tap
• 1x AQUAvalve valve
• 1x 1.5 metres of 6mm pipe
• 1x root control disc

Tip: Always use a 6mm or 16mm filter with every reservoir. Use quality compost, soil or coconut with a 30-50% mix of perlite.

The AutoPot 1Pot module can be used for plants of any type and size. The AutoPot 1Pot module is easy to expand, as many pots can be connected to one reservoir.

All AutoPot products operate:

• WITHOUT ELECTRICITY
• WITHOUT PUMPS
• WITHOUT TIMERS

Gravity pressure is all that is required from the water reservoir or barrel. The systems are undoubtedly among the easiest to use and can be left unattended for weeks, thanks to the ability of the AQUAvalve valve to deliver everything the plant requires. AutoPot 1Pot modules can be connected to build even larger systems. See the advice section for more information or download the 1pot System Guide*.

1Pot is the modular irrigation system from AutoPot, enabling gardeners and commercial growers to achieve remarkable yields from their plants. Whether at home, in the garden, greenhouse or polytunnel, 1Pot will expand to create a system of unlimited scale thanks to its modular design. The 1Pot systems remain flexible even after installation, and the modules can be moved to suit the changing needs of the grower and their plants. Like all AutoPot irrigation systems, 1Pot uses AQUAvalve valve for simple, efficient feeding and irrigation of edible or ornamental plants. Once assembled, the reservoir is filled with water and liquid fertiliser (if necessary), and the 1Pot system will fully take care of all your feeding needs, providing them with fresh, balanced nutrition throughout their life cycle.

The AutoPot 1Pot module system is easily expandable, as many pots can be connected to a single reservoir. Please see examples of typical layouts using 6 mm tubing or 16 mm tubing. The pots and trays can easily be moved as desired; if the plants become too large, they can be spaced further apart with ease. Once assembled and connected to a reservoir filled with nutrient solution, this exceptionally versatile system will take care of all your needs.

All you need to do is remember to refill your reservoir from time to time. Reservoirs and filters are sold separately.

The AutoPot 1Pot module includes:

• 1x 1Pot system
• 1x tray and lid
• 1x 15 L pot
• 1x AQUAvalve valve
• 1x 1.5 m 6 mm tubing
• 1x Marix disc (square) 186 mm x 86 mm (black)
• 1x root disc (square) 196 mm x 196 mm (black and gold)

Tip: Always use a 6 mm or 16 mm filter with every reservoir. Use quality compost, soil or coco with a 30-50% mix of perlite.

Sealing ring for bucket / barrel.

Smooth walls for easy installation.

6mm hole

AQUAbox Spyder is designed to supply water and feed plants of all types and sizes that are grown directly in the soil.
AQUAbox Spyder is attached to capillary wicks that distribute water beneath the soil over an area of up to 1.2 square metres.
With an AQUAvalve valve at its base, AQUAbox Spyder draws water from a reservoir only in the amount plants need, ensuring efficient water use. Plant roots instinctively grow towards the water source, attaching themselves to the capillary wicks below soil level.

• 4 mm tubing - 2.15 metres
• Aqua Valve valve
• Water reservoir seal
• 6 mm capillary strip, 6 metres long
• Small spirit level
• 13 mm to 4 mm reducer with filter

Video: https://www.youtube.com/watch?v=3IRMITTlc1k