Products

AQUAbox Straight is designed to supply water and nutrients to plants of any type and size grown directly in soil.
AQUAbox Straight is attached to a single capillary wick that distributes water below the soil over an area of up to 4 square metres. With an AQUAvalve valve at its base, AQUAbox Straight draws from the water supply (water reservoir) only as much as the plants need, ensuring incredibly efficient water use. Plant roots instinctively grow towards the water source, attaching to the capillary wicks below soil level.

The AQUAbox contains the AQUAvalve valve technology but is designed to be placed directly in the ground; the capillary mat draws water from the AQUAbox and distributes it through the soil below.
The AQUAbox keeps your plants watered for days or weeks at a time, making it the ideal irrigation solution for weekends, holidays and year-round watering.

 

AutoPot AQUAbox Straight includes:

• 1x AQUAbox Straight Body
• 1x AQUAvalve valve
• 1x mini spirit level
• 1x 13mm–4mm built-in filter
• 1x AQUAbox Straight capillary mat
• 2m of 4mm tubing
• 1x full instructions

Tip: Make sure the capillary strips touch the bottom of the AQUAbox on both sides of the AQUAvalve valve after they have been rolled up.

The AQUAvalve valve is supplied with all AutoPot watering systems. Once connected to the water supply, the AQUAvalve valve controls the flow of water to the plants through simple gravity pressure from the reservoir or water tank; no pumps, mains water pressure, electricity or timers are required. Once connected to the reservoir, the AQUAvalve valve opens and allows water to fill the tray to a preset level of 20mm. The AQUAvalve valve does not refill the tray until all the water has been used.
The AQUAvalve valve is at the heart of all irrigation systems and ensures that our systems require minimal maintenance, can be easily expanded, eliminate hand watering, and provide watering and feeding for crops, whether ornamental or edible year-round. Thanks to the capacity of the AQUAvalve valve, AutoPot are now market leaders in irrigation, whether for home or commercial gardening or hydroponics. The AQUAvalve valve is a simple but highly effective irrigation device that produces phenomenal growth and maximum yields.

The AQUAvalve valve...how does it work?

 

The AQUAvalve valve is a simple but highly effective irrigation device, but it must be handled with care. Keep the AQUAvalve valve and the tray in which it is located clean and free from blockages and soil particles, and you will be able to water and feed your plants for many years. The AQUAvalve valve has a 12-month warranty.

The AQUAvalve valve is supplied with all AutoPot systems. Once connected to the water supply, the AQUAvalve valve controls the flow of water to the plants through simple gravity pressure from the reservoir/nutrient tank; no pumps, mains water pressure, electricity or timers are required. Once connected to the reservoir, the AQUAvalve valve opens and allows water to fill the tray to the preset level of 20 mm. When the level is reached, the AQUAvalve valve shuts off and prevents further water from entering the tray until all water has been consumed by the plants.

 

Tip: Remember to set the AQUAvalve valve before use. When connecting 6mm or 16mm pipe, always ensure that the pipe end is first immersed in warm water; this will make connection much easier.

 

When all water has been consumed and the tray is empty, the AQUAvalve valve opens again and allows a new quantity of water to enter the tray. As the plants grow larger, the AQUAvalve valve opens and closes more frequently and operates according to the plants' needs, filling the tray and then allowing it to empty completely before refilling, enabling the plants to go through a wet and dry cycle. At AutoPot we call this technology PCI, or "Plant Controlled Irrigation".

 

The AutoPot AQUAvalve valve cover, used together with the AQUAvalve valve, allows the grower to create their own basic but highly effective hobby irrigation system. Only a flat tray of any shape or size is required. The user simply places the AQUAvalve valve in the tray and places the AutoPot AQUAvalve valve covera over it. Ensure that the small opening at the top of the AutoPot AQUAvalve valve covera is not blocked.

 

Tip: Keep the tray and the AQUAvalve valve clean and free from contact with loose growing medium; use a small brush to remove any adhering soil from the sides and bottom of the pots before placing them in the tray.

 

 

Once the reservoir is filled with water or liquid fertiliser, it begins to travel through the pipe from the reservoir. It passes through the AQUAvalve nozzle (1) and into the tray. As the tray fills (2) with water, air is trapped inside the main body and around the "inner float", causing it to rise (3).

As the water level rises in the tray, the "upper float surface" rises (1), releasing trapped air in the main body (2).
This in turn allows the "inner float" to rise and shut off the supply (3). The water level is now 20mm.

The planted plants begin to reduce the water level in the tray (1). As the water level falls, the "upper float" closes, creating a vacuum inside the "main body" of the AQUAvalve valve (2).
This vacuum traps water inside the "main body" and in turn holds the "inner float" up, shutting off the incoming water (3).

When the water level in the tray has been completely depleted (1), the surface tension around the main body of the AQUAvalve valve breaks; this may take up to 30 minutes. While this happens, all water trapped in the "main body", keeping the "inner float" (2) raised and the water supply shut off, is released, allowing the "inner float" to drop and open the water supply.

Autopot Blue Bubble Pipe is a specially designed accessory intended for use with Autopot AirDome systems. This blue tube is essential for ensuring efficient air distribution in the plants' root zone, which stimulates growth. Features: The tube ensures an even distribution of air bubbles in the water, improving oxygen supply to the plant roots. Suitable for AirDome systems: Designed specifically for use with Autopot AirDome, it ensures perfect compatibility and easy installation. Durable material: Made from corrosion-resistant plastic, this tube is designed to withstand the demanding conditions of a grow environment. Universal size: At 52mm long, it is suitable for most standard AirDome systems. Easy to clean: Offers quick and easy cleaning and maintenance to maintain optimal efficiency.

Smart home gardening! Autopot presents the innovative "Easy to Grow System"—an automated plant-growing system ideal for both beginners and experienced gardeners. Key features: Self-Watering System: Thanks to its unique irrigation system, plants take exactly the amount of water they need without any human intervention. Capacity: Two large containers, each with a capacity of 15 litres, providing sufficient root space and optimal growth. Efficiency: Reduces water and fertiliser use, minimising waste and increasing growing efficiency. Simple Installation: Easy to assemble and use, with no need for electricity or a water supply. Suitable for All Plant Types: From vegetables and fruit to ornamental plants and herbs. Eco-Friendly Solution: The system increases plants' resistance to stress and disease

The AutoPot easy2grow 8.5 L extension kit includes:

• 2x 8.5l pots
• 2x Marix discs - Marix discs are placed in each pot to prevent soil / compost from leaving the pots
• 2x Root discs - root discs are placed in the tray under each pot, with the golden side facing up. Root discs prevent roots from leaving the pots and discourage them from growing toward the AQUAvalve valve.
• 1x AQUAvalve valve
• 1x 1m tube
• 1x 6mm tee for easy connection to the easy2grow kit or existing systems.

 

The easy2grow system is AutoPot's best-selling irrigation system; it offers effortless growing in a greenhouse, polytunnel, garden or home without wasting a single drop of water. Easy2grow uses the AQUAvalve valve to supply water and feed your plants using 8.5-litre pots, without the need for pumps, timers or electricity. It provides fully automated delivery of water and nutrients, with a built-in wet / dry cycle to mimic natural systems. Whether you use a single easy2grow or multiple easy2grow extensions on a large commercial scale, this system provides everything a plant requires. Easy2grow can be used as a hydroponic device or with the growing medium / substrate of your choice. The standard pot size used for the easy2grow system is 8,5 litres; if you need something slightly larger to meet your growing needs, choose the "Large" option and increase your pot size to 15 litres.

With the easy2grow system, any growing substrate may be used, whether traditional soil-based or hydroponic. With minimal maintenance, reliable and automated, the easy2grow system allows gardeners to relax, go away for the weekend and remain confident about their healthy plants and abundant harvest.

The easy2grow system expands easily, as many pots can be connected to one reservoir. Please see examples of typical layouts using 6mm pipe or 16mm pipe*. Pots and trays can easily be moved as desired; if plants become too large, they can readily be spaced further apart. Once set up and the reservoir is filled with water and solution, this exceptionally versatile system will fully take care of all your needs.

 

Tip: Always use a 6mm or 16mm filter with every reservoir. Use quality compost, soil or coconut with a 30-50% mix of perlite.

Autopot Tap for all Water Butts

Autopot propagation tray, with the option to connect it to an automatic irrigation system.

• Height: 28 cm
• Length: 120 cm
• Width: 55 cm

 

• Transparent lid with ventilation openings
• 2 coco mats (substrate), 3 cm thick
• AquaValve
• Copper-coated root control sheet – 115 cm × 51 cm
• 4 mm hose, 1 metre long
• Reducing T-piece – 13 → 4 mm
• T-piece – 4 mm
• Garland plastic tray, resistant to minerals and salts.

 

Video: https://www.youtube.com/watch?v=_OUN6sXH2wY

AutoPot Hose, 13mm Diameter

AutoPot 4 mm Hose - 1 m

Discover the convenience of automatic irrigation with the AutoPot module with one 8.5-litre pot. Key features: Optimal Volume: The 8.5-litre pot is perfect for most plant types and provides sufficient space for roots to grow healthily. Easy Installation: A simple, intuitive design that allows quick and easy setup without the need for special tools. Eco-Efficient: The system reduces water and fertiliser use while providing optimal conditions for your plants to grow. High-Quality Materials: Made from UV- and corrosion-resistant materials that ensure years of use. Flexibility: Can be combined with additional modules and pots to create a larger, customised irrigation system. The AutoPot module offers a simple yet effective way to grow plants. Whether you are a beginner or an experienced grower, this system will help you achieve remarkable results with minimal effort.

• Replacement tray with lid for Autopot easy2grow modules and systems. The tray is suitable for an 8.5 litre or a 15 litre square pot.
• The tray requires an AutoPot AQUAvalve valve to be part of a complete system.
• We recommend using a PotSock- Square at the base of the pots to prevent roots from interfering with the AutoPot AQUAvalve valve.
• Colour: black.

Autopot 47 L reservoir with included lid and rubber seal.

• capacity: 47 L
• colour: black
• dimensions H/W/D: 615 x 375 x 300 mm
• material: hard plastic

Note: Always raise your reservoir to a minimum of 150 mm above the highest AQUAvalve!

• Pot 15 litres, for use in AutoPot easy2grow systems, as well as 1Pot modules and systems. 
• We recommend using PotSock- Square at the bottom of the pots to prevent roots from interfering with the AutoPot AQUAvalve valve.

Handbag that absorbs unwanted odours AVERT Travel Bag.

• volume: 5.5L
• dimensions: 25cm x 15cm x 15cm
• inner lining with a protective mesh of premium activated carbon, odour-absorbing
• water- and odour-resistant zipper
• outer cover with activated carbon, for even greater odour protection
• waterproof outer cover made from 600D Polyester / PVC
• hanging buckle

Note: The bag does not include the handle shown in the photo!

The AZERWING reflector by Prima Klima with an E40 socket for HPS & MH lamps provides even light distribution without creating so-called "hot spots". The reflector sheet is made of anodised aluminium with 86% light reflectivity after the shaping process.

• Length: 550 mm
• Width: ~500-710 mm
• Height: ~150-200 mm
• Maximum for 1000W
• Weight: 0.90 kg

• 86% reflectivity
• Adjustable lighting angle
• Adjustable lamp tilt
• Even light distribution, without hot spots
• Optimal cooling and flexible connection.

The AZERWING reflector by Prima Klima, with an E40 socket for HPS & MH lamps, ensures uniform light distribution without creating so-called “hot spots”. The Vega reflector sheet is a unique PVD 4-Layer system with light reflectance of up to 95% after the shaping process

• Length: 750 mm
• Width: ~500-950 mm
• Height: ~250-380 mm
• Maximum for 2 x 600W
• Weight: 2.80 kg

• 95% reflectance
• Adjustable lighting angle
• Adjustable lamp tilt
• Even light distribution, without hot spots
• Optimal cooling and flexible connection.

Low-pressure axial fan from the Vents VKOM series, with a steel housing and the option for recessed / in-line mounting directly in the ventilation system. The fan has an asynchronous single-phase motor with integrated thermal overheating protection with automatic restart.

• for use in commercial, office and other public or industrial premises
• application: combined (extract and supply) ventilation system for various spaces requiring high airflow with relatively low system resistance
• The fan is powered through the remote terminal box. The power supply and installation must be carried out in accordance with the terminal-box manual and wiring diagram.
• diameter: ⌀ 162 mm
• max. airflow: 180 m³/h

• Suitable for use in commercial, office and other public or industrial premises.
• Application: combined (extract and supply) ventilation system for various spaces requiring high airflow with relatively low system resistance.
• Motor: the single-phase asynchronous motor is equipped with thermal overheating protection with automatic restart. The motor is equipped with sleeve bearings. Degree of protection of the motor IP44.
• Speed control: step speed control via an external autotransformer (sold separately).
• Mounting: can be wall-mounted or recessed (in-line); (mounting brackets included).
• Power supply: the fan is powered through the remote terminal box. The power supply and installation must be carried out in accordance with the terminal-box manual and wiring diagram.

Technical specifications:

• phases: 1
• voltage: 230 V
• frequency: 50 Hz
• power: 26 W
• current: 0.19 A
• max. airflow: 180 m³/h
• speed: 1432 rpm
• noise level at a distance of 3 m: 33 dBA
• min. temperature of processed air: - 30°C
• max. temperature of processed air: + 40°C
• degree of protection: resistant to dust and water splashes (IPX4, IP44)
• blade material: aluminium
• housing material: steel

Fan dimensions (as shown in photo no. 3):

• B: 183 mm
• diameter D: ⌀ 162 mm
• length L: 220 mm
• L1: 40 mm
• L3: 30 mm
• weight: 1.8 kg

Grow your delicious organic microgreens with just one watering in 7 to 14 days!

Babylon Garden is an innovative modular hydroponic system for growing microgreens. It consists of 4 trays mounted vertically with a total height of 34 cm. Each comprises: an Ishtar tray, grid, non-stick coated lid, vertical support tube and MDF stand. The Babylon Garden set includes as a gift:

• 2x 100 g packs of certified organic seeds - radish variety Daikon Panzer and broccoli variety Raabs Sudoku
• 24 hemp mats

7 TIPS FOR A SUCCESSFUL URBAN GARDEN!

1. BEFORE YOU START

• See the tips and instructional video on the website www.babylongarden.com (or here.*). 
• Download the Babylon Garden app and scan the QR codes in the consumables section (the hydroponic growing medium and the seeds).
• The Babylon Garden app will guide you through every step of the process of growing sprouts and microgreens.

2. SYSTEM PLACEMENT

• Keep the system at room temperature (19-21°C), close to a natural light source but away from direct sunlight.
• Keeping the system near an excessive heat source may lead to the formation of mould (mould is grey and has an unpleasant smell).

3. ABOUT THE SEEDS

• Most seed varieties can be used with the Babylon Garden System without any preparation. Wash your hands before handling the seeds.
• Seeds such as beans, wheatgrass, lentils and peas require pre-soaking in water before use.
• Do not exceed the recommended amount of seeds per tray. Seeds need some space between them to ensure proper ventilation and access to light.

4. ABOUT THE WATER

• The water in the Babylon Garden system must be at room temperature.
• The water can be tap water or filtered / still water.
• The system is designed to be filled with water once. If you leave the seeds to grow for longer than the period recommended in the app, fill the container with water up to 400 ml.

5. ABOUT THE HEMP MAT

• The hemp mat is for single use only and must be thoroughly moistened before use, as shown in the video on our website.

6. ABOUT HARVESTING THE READY SPROUTS / PLANTS

• Microgreens are ready when they are about 1 cm tall above the hemp mat, but they can also be grown to a more mature stage (about 7-8cm).
• Sprouts and microgreens can be stored on a dry paper towel in the refrigerator for a few days.

7. ABOUT MAINTENANCE

• The trays, grids and lids must be washed with a little soap before each use by hand or in a dishwasher.

Download the BABYLON GARDEN app for ANDROID here* or iOS here*.

www.babylongarden.com

Grow your delicious organic microgreens with just one watering in 7 to 14 days!

Babylon Garden is an innovative hydroponic system for growing microgreens. It consists of 1 tray, a grid, a non-stick coated lid, a vertical support tube and an MDF stand. The Babylon Garden set includes as a gift:

• 1 pack of certified organic seeds - radish variety Daikon Panzer 100 g
• 2 hemp mats

7 TIPS FOR A SUCCESSFUL URBAN GARDEN!

1. BEFORE YOU START

• See the tips and instructional video on the website www.babylongarden.com (or here.*).
• Download the Babylon Garden app and scan the QR codes in the consumables section (the hydroponic growing medium and the seeds).
• The Babylon Garden app will guide you through every step of the process of growing sprouts and microgreens.

2. SYSTEM PLACEMENT

• Keep the system at room temperature (19-21°C) near a natural light source, but away from direct sunlight.
• Keeping the system near an excessive heat source can lead to the formation of mould (mould is grey and has an unpleasant smell).

3. ABOUT THE SEEDS

• Most seed varieties can be used with the Babylon Garden System without any preparation. Wash your hands before handling the seeds.
• Seeds such as beans, wheatgrass, lentils and peas require pre-soaking in water before use.
• Do not exceed the recommended amount of seeds per tray. Seeds need some space between them to ensure proper ventilation and access to light.

4. ABOUT THE WATER

• The water in the Babylon Garden system should be at room temperature.
• The water can be tap water or filtered / still water.
• The system is designed for one-time water filling. If you leave the seeds to grow for longer than recommended in the app, you should fill the container with water up to 400 ml.

5. ABOUT THE HEMP MAT

• The hemp mat is for single use only and must be thoroughly moistened before use, as shown in the video on our website.

6. ABOUT HARVESTING THE READY SPROUTS / PLANTS

• Microgreens are ready when they are about 1 cm above the hemp growing mat, but they can also be grown to a more advanced stage (about 7-8 cm).
• Sprouts and microgreens can be stored on a dry paper towel in the refrigerator for a few days.

7. ABOUT MAINTENANCE

• Trays, grids and lids should be washed with a little soap before each use, either by hand or in the dishwasher.

Download the BABYLON GARDEN app for ANDROID here* or iOS here*.

www.babylongarden.com

Bactoil SC - Bacillus Thuringiensis 200ml is a liquid biopesticide / organic insecticide for ornamental plants, trees, fruit or vegetables. It is a concentrated suspension of Bacillus thuringiensis (var. Kurstaki, strain PB-54 7.24%), suitable against caterpillars of all pests in the class Lepidoptera (scale-winged insects, butterflies). Especially suitable for:

 

• small field armyworm* (spodoptera exigua)
• biopesticide / organic insecticide
• against caterpillars

Bacillus thuringiensis is a Gram-positive bacterium found in soil and often used as a biopesticide. During sporulation, it releases a δ-endotoxin with insecticidal action. Caterpillars ingest the bacterium while feeding and die within days. It is best applied at the earlier stages of caterpillar development!

 

Application:

 

• Shake well before use!
• Dilute 2-3ml in 1l of water to make a foliar spray! 
• Do not use together with bactericides! 
• Spray generously over and under the leaves!
• Repeat after 7-10 days in the event of heavy infestation!