Products

Number of conductors - 3 x 2.50 sq. mm - 1 m. This cable is designed with special attention to quality and is exceptionally suitable for a wide range of applications in the home, office or industrial environments. Suitable for installation in walls, floors or ceilings, it combines functionality with aesthetics. It is designed to meet high standards of safety and quality, making it a preferred choice for electrical installations in various environments.

Cayenne Long Slim (Cayenne Red-Long Slim) is one of the world’s most popular chilli pepper varieties, known for its strong yet balanced heat and versatile culinary use. The fruits are long, slender and slightly curved, ripening from green to bright red.

The variety is highly productive and easy to grow, making it suitable for both beginners and experienced gardeners. The peppers have thin walls and are especially suitable for drying and grinding.

Cayenne Long Slim is a classic choice for making hot sauces, spices and marinades, thanks to its sharp, clean flavour and strong spicy kick.

Key features

✔️ Type: Capsicum annuum (Cayenne type)
✔️ Quantity: 25 seeds
✔️ Heat level: approximately 30 000–50 000 SHU
✔️ Shape: long, slender, slightly curved fruits
✔️ Length: ~10–20 cm
✔️ Colour: green → bright red when ripe
✔️ Ripening period: ~70–80 days
✔️ Plant: compact and productive
✔️ Suitable for drying and grinding into powder

 

Benefits

✔️ Classic spicy flavour
✔️ Perfect for drying and making cayenne pepper
✔️ High yield per plant
✔️ Easy-to-grow variety
✔️ Suitable for gardens and pots
✔️ Versatile use – sauces, seasonings, dishes

 

 

? Sowing method

Sowing: January–April indoors* (20–30°C).
Transplanting: into a greenhouse (for higher yields) or outdoors at the end of May.
Care: tie taller plants to stakes or prune them for a more compact shape.
Tip: in autumn, plants can be transplanted into pots and continue growing on a windowsill.

 

Little Devil Calabrese (Little Devil Calabrese), also known as Diavolicchio Calabrese (Diavolicchio Calabrese), is a traditional Italian hot pepper (Capsicum annuum) with 50 000 SHU. The plant produces numerous small red fruits in clusters of 10–15 fruits, distinguished by strong heat, a spicy flavour and rich aroma. The variety is easy to grow and especially suitable for outdoor cultivation and pots. Little

🔹 pH Calibration Solution 4.01 - 300 ml is specially formulated for calibrating pH meters, ensuring accurate and precise measurements. With its stable pH level of 4.01 at 25°C, it is ideal for checking and adjusting measuring instruments used in hydroponics, aquariums, laboratories, and other applications.

🔹 Detailed specifications:

• Volume: 300 ml
• pH value: 4.01 at 25°C
• Application: Calibration of pH meters
• Composition: Complies with international standards for calibration solutions
• Manufacturer: Wather Masters

 

🔹 Recommendations and instructions for use:

1. Pour a small amount of the solution into a clean container.
2. Immerse the pH meter electrode in the solution.
3. Perform calibration according to the manufacturer's instructions for your pH meter.
4. After use, discard the used solution and do not return it to the original container to avoid contamination.

 

✅ Benefits of use:

• Accuracy: Provides precise pH measurements.
• Easy to use: Convenient for use in both laboratory and field conditions.
• Compatibility: Suitable for most pH meters on the market.
• Durability: Stable pH value, ensuring reliable calibration of your instruments. 

🔹 pH 7.01 Calibration Solution - 300 ml is specially formulated for calibrating pH meters, ensuring accurate and precise measurements. With its stable pH level of 4.01 at 25°C, it is ideal for checking and adjusting measuring instruments used in hydroponics, aquariums, laboratories, and other applications.

🔹 Detailed specifications:

• Volume: 300 ml
• pH value: 7.01 at 25°C
• Application: Calibration of pH meters
• Composition: Complies with international standards for calibration solutions
• Manufacturer: Wather Masters

🔹 Recommendations and instructions for use:

1. Pour a small amount of the solution into a clean container.
2. Immerse the pH meter electrode in the solution.
3. Calibrate according to the manufacturer's instructions for your pH meter.
4. After use, discard the used solution and do not return it to the original packaging to avoid contamination.

✅ Benefits of use:

• Accuracy: Ensures precise pH measurements.
• Easy to use: Convenient for use both in laboratory and field conditions.
• Compatibility: Suitable for most pH meters on the market.
• Durability: Stable pH value, ensuring reliable calibration of your instruments.

Kampanaki is a traditional chilli pepper variety originating from Greece, known for its good flavour and versatile uses. It is suitable for both garden and pot growing. The variety stands out for its moderate heat and juicy texture.

Variety: Kampanaki (Capsicum annuum) — a classic Balkan variety with excellent flavour.

Number of seeds: 15 seeds

Plant type: a medium-height plant (around 50–90 cm), suitable for pots and open ground.

Fruits: medium-sized, conical in shape; they ripen from green to bright red, with a fleshy, juicy texture.

Heat level: mild to moderate (around 500 – 8000 Scoville), with balanced flavour and aroma.

Use: suitable for fresh consumption, stuffing, sauces, drying and seasoning.

Growing recommendations:

Sowing: start indoors* in late winter or early spring at a temperature of around 22–26°C.

Light: requires a sunny location or additional lighting* when grown indoors.

Transplanting: move plants outdoors after the risk of frost has passed and temperatures have stabilised.

Watering and care: maintain moderate moisture and good soil aeration; proper feeding* supports yield and fruit quality. Avoid infrequent, heavy watering.

Camouflage silicone cover imitating a COLA can 330ml – the ideal accessory for travel, camping, festivals and gifts! This flexible silicone cover completely covers aluminium cans from 330ml to 500ml and makes them look like soft drinks (cola-type bottle). Easy to put on and remove, it is ideal for concealment and insulation during outdoor use.

Features:

• Compatibility: For 330 ml, 355 ml and 500 ml cans (suitable for WHITE CLAW, TRULY, BUD LIGHT SELTZER and more)

• Material: Flexible and durable silicone

• Use: Very easy to fit and remove (it is recommended to spray a little oil inside before initial use)

• Insulation: Keeps the drink cool for longer

• Dimensions: Fits most standard cans up to 500 ml in height

• Portable: Foldable and compact – fits in a pocket

• Reusable: Durable and easy to clean

---

Suitable for:

• camping, hiking, travel

• a birthday or Christmas gift

• fun moments with family or friends

Camouflage silicone cover imitating a Pepsi Zero 330 ml can – the ideal accessory for travel, camping, festivals and gifts! This flexible silicone cover fully covers aluminium cans from 330 ml to 500 ml and makes them look like soft drinks (cola-style bottles). Easy to fit and remove, it is ideal for concealment and insulation when used outdoors.

Features:

• Compatibility: For 330 ml, 355 ml and 500 ml cans (suitable for WHITE CLAW, TRULY, BUD LIGHT SELTZER and more)

• Material: Flexible and durable silicone

• Use: Very easy to fit and remove (it is recommended to spray a little oil inside before initial use)

• Insulation: Keeps the drink cool for longer

• Dimensions: Fits most standard cans up to 500 ml in height

• Portable: Foldable and compact – fits in a pocket

• Reusable: Durable and easy to clean

---

Suitable for:

• camping, hiking, travel

• a birthday or Christmas gift

• fun moments with family or friends

Camouflage silicone sleeve styled as a Sprite can, 500 ml – the ideal accessory for travel, camping, festivals and gifts! This flexible silicone sleeve completely covers aluminium cans from 330 ml to 500 ml, making them look like soft drinks (a cola-style bottle). Easy to put on and take off, it is ideal for concealment and insulation when used outdoors.

Features:

• Compatibility: For 330 ml, 355 ml and 500 ml cans (suitable for WHITE CLAW, TRULY, BUD LIGHT SELTZER and others)

• Material: Flexible, durable silicone

• Use: Very easy to put on and take off (it is recommended to spray a little oil inside for first use)

• Insulation: Keeps the drink cold for longer

• Dimensions: Fits most standard cans up to 500 ml tall

• Portable: Foldable and compact – fits in a pocket

• Reusable: Durable and easy to clean

---

Suitable for:

• camping, hiking, travel

• a birthday or Christmas gift

• fun times with family or friends

A key component in the easy2GO kit. The AutoPot AQUAvalve valve cover, used together with the AQUAvalve valve, allows the grower to create their own simple yet highly effective hobby system.

All that is needed is a shallow tray of any shape or size. The user simply places the AQUAvalve valve in the tray and fits the AutoPot AQUAvalve valve cover over it. The cover is made from heavy-duty composite material, so no weight is needed to hold it in place. Then simply connect the AQUAvalve valve to a reservoir using 6mm tubing and a filter. Ensure that the pot is no smaller than 5 litres. If you use small pots, you risk drowning the plants. A small plant in a small pot will not appreciate sitting in deep water, as its root system will be unable to breathe; this does not apply to bog or carnivorous plants. If you intend to grow carnivorous plants with this method, please use rainwater only.

Cover for Sump is a cover designed to seal an existing sump in a tray when you wish to disconnect it from the system. Covering it prevents contaminants from entering and makes it easy to deactivate the sump in the tray without removing it. 

Detailed features

• Product type: sump cover — used when you wish to "remove" or deactivate the sump in a tray.
• Installation instructions:
  1. Clean and dry the area around the sump.
  2. Apply Staal & Plast adhesive along the edge of the cover and allow it to bond.
  3. Seal the edges to ensure a tight, waterproof finish.
• Note: For optimal results, follow the instructions in the dedicated technical glue product sheet ("glue product sheet").

 

Recommendations for use

• Ensure the surface is properly prepared — clean and dry — before bonding.
• Use the original Staal & Plast adhesive product to ensure stability and durability.
• Seal the edges of the cover after installation to prevent dirt and moisture from entering.

 

Benefits

The sump cover allows easy and secure deactivation of the sump in a tray without dismantling it. It makes system management easier when a temporary or long-term change is needed, while preventing contamination through strong bonding and quality sealing.

The PLANT!T Bucket Lid 20 l is ideal for DIY hydro systems, as the pre-marked circles make it easy to cut the correct size for your net pot.

 

• the built-in handles in the bucket lid provide a secure grip and easy carrying when fitted to the PLANT!T 20 l bucket

EP 32 Cover is a lid for the EP 32 seed-rooting propagator.

• made of soft plastic
• dimensions L/W/H: 23 x 18 x 9 cm

EP 42 Cover is a lid for the EP 42 propagator for rooting seeds.

• made of soft plastic
• dimensions L/W/H: 38 x 24 x 9 cm

Garland XL High Dome Propagator Cover is a propagator cover made from rigid, shatter-resistant plastic. The high dome of the cover and its rotating adjustable vents for ventilation regulate humidity and allow you to grow taller plants, helping ensure healthy and strong seedlings.

• L/W/H dimensions: 57.5 x 39.5 x 15 cm
• rigid, impact-resistant plastic

The cover is ideal to combine with:

1. Large Garland XL seed tray with drainage holes (sold separately)
2. Large garden tray without drainage holes Garland XL (sold separately)
3. small seedling pots (sold separately)

With the Stewart Essentials propagator lid, you can protect young plants from bad weather or pests. It can be used with a propagator tray, as well as directly on the soil.

 

• dimensions L/W/H: 100 x 43 x 17cm.
• adjustable ventilation
• stakes for anchoring directly into the soil (included)

The capillary mat for the Autopot AQUAbox Straight is a simple but critical component for automatic irrigation of your plants. It acts as a bridge between the water reservoir and the soil, allowing water to transfer gradually and evenly to maintain optimal root moisture. Features: The capillary mat is designed to work with the Autopot AQUAbox Straight, enabling seamless automatic irrigation of your plants without electricity or timer settings. Efficient water distribution: the mat ensures even water distribution throughout the soil, ensuring that all plants receive sufficient moisture. Length: long enough to cover a wide area, it is ideal for irrigating a large area or several plants. Durable: made from durable materials, the capillary mat is designed to withstand various gardening conditions and continue functioning effectively for a long time. Easy to install: this capillary mat is easy to fit and maintain, offering a simple, effective solution for automatic irrigation.

8 L/h dripper Dripper Flow rate - 8 L/h

Medusa multi-outlet dripper with 6 independent branches and a flow rate of 12 L/h — for even irrigation of up to 6 plants. With a self-compensating dripper.

Detailed features

• Number of outlets: 6  
• Total flow rate: 12 L/h (average ~2 L/h per outlet)
• Type: self-compensating dripper — the device maintains a constant flow rate despite minor pressure fluctuations
• Capillary length: ~60 cm for each outlet branch
• Tube type: 4 mm diameter microtube.
• Suitable for installation on pipes with a diameter of 16 to 32 mm.

 

Recommendations for use

• Install the dripper in a system with maintained pressure and filtration to prevent clogging.
• Keep the system clean. Flush it periodically to prevent clogging.
• Use suitable fittings to connect 25 mm pipes and microtubes.

 

Benefits

The Medusa 6-outlet 12 L/h dripper is a reliable solution for precise, even irrigation of a group of plants. Its self-compensating technology ensures a constant flow rate at low pressure.

The Secret Jardin DF16 150m³/h carbon filter is specially designed to work together with the DF16 150/250/350m³/h extractor fan. It assembles in less than 5 seconds, without any tools!

 

• dimensions: ⌀ 22.5cm x 13cm
• high-quality carbon CTC-80 ⌀ 3mm
• carbon weight: 1.0kg
• carbon bed thickness: 3cm
• filter weight: 1.5kg
• suitable for tent: DS60

Connection and operating instructions: here*

 

Secret Jardin DF16 250m³/h carbon filter is specially designed to work with the extractor fan DF16 150/250/350m³/h. It assembles in under 5 seconds, with no tools required!

 

• dimensions: Ø 22.5cm x 19cm
• high-quality carbon CTC-80 Ø 3mm
• carbon weight: 1.5kg
• carbon bed thickness: 3cm
• filter weight: 2.1kg
• suitable for tent: DS90

Connection and operating instructions: here*

 

Secret Jardin DF16 350 m³/h carbon filter is specially designed to work with the extraction fan DF16 150/250/350 m³/h. It assembles in under 5 seconds, with no tools required.

 

• dimensions: ⌀ 22.5 cm x 24 cm
• high-quality carbon CTC-80 Ø 3mm
• carbon weight: 2.0 kg
• carbon bed thickness: 3cm
• filter weight: 2.7 kg
• suitable for tent: DS120

 

Connection and operating instructions: here*

 

The carbon filter is made from high-quality raw materials with mechanical purification and water-softening effect. To improve purified-water quality, it uses a blend of bituminous coal and coconut-shell carbon meeting the highest NSF standards. Thanks to its improved formula, the purified water is softened and filtered from chlorine and mechanical particles down to 10 microns, making it clean and suitable for drinking.

The improved activated-carbon filter removes:

- chlorine and its derivatives
- organic compounds
- pesticides
- heavy metals: copper, lead, mercury
- radioactive elements: strontium, caesium
- softens water.
 
Advantages of the activated-carbon filter:
- improves water taste and smell
- high-quality product
- competitive price
- made from safe materials
- fast delivery
- made in Europe

Features:

- made from activated coconut-shell carbon and zeolite antimicrobial agent
- filters mechanical impurities, chlorine and heavy metals, and reduces water hardness
- operating temperature: 2 °C - 55 °C
- length 10 "
- replacement every 6 - 12 months, 37620 litres depending on the water

GrowMax 3000 Carbon Block Filter is a replacement carbon filter for the GrowMax 3000 system.

GrowMax 3000 Carbon Block Filter is a high-performance carbon filter designed to provide exceptional water filtration quality. With its capacity to process up to 3000 litres of water, this filter is ideal for home use as well as larger water purification systems, such as those in restaurants, cafés and offices. The filter effectively removes chlorine, organic contaminants, tastes and odours, thereby improving the taste and quality of the water. With its compact, robust construction, GrowMax 3000 is easy to install and maintain, providing a long, reliable service life. Suitable for a range of applications, it is particularly useful in places where water is exposed to high levels of contamination.

GrowMax Green Carbon Block Filter 10" is a replacement carbon filter for:

 

• Eco Grow
• Power Grow
• Mega Grow
• Maxquarium

 

GrowMax Green Carbon Block Filter 10" is a high-quality replacement carbon filter specially designed for effective water purification. At 25cm long, this filter is designed to retain chlorine, organic contaminants, tastes and odours, making it ideal for use in home and garden water purification systems. The carbon block is engineered to provide maximum filtration efficiency while maintaining a high water flow. It is suitable for aquariums as well as hydroponic and gardening systems, where water quality is crucial. The filter is easy to install and replace, ensuring that your systems always have access to clean, healthy water.

Replacement carbon filter for OptiClimate PRO 3 or PRO 4. OptiClimate climate systems from the water- and air-cooled PRO 3 and PRO 4 series have built-in dust and carbon filters. The OptiClimate carbon filter removes mould spores from the air and should be replaced every 10 to 12 weeks. One replacement set contains three filters.

Kardoula (Kardoula) is an early, fast-growing Turkish pepper variety (Capsicum annuum) with exceptionally mild heat of 0–1 000 SHU. The small, conical, thick-walled fruits ripen to deep dark red and impress with rich flavour and distinctive raisin-like sweetness. Their shape is ideal for stuffing with cheese, meat or sauces.