Products

LUMii Black 600W, Maxibright Warpdrive and PEARLPRO XL kit for indoor growing. The kit includes:

• lamp / bulb: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open PEARLPRO XL 1pc.

Attention: the kit does not include a cable from the ballast to the reflector!

LUMii Black 600W kit, Maxibright Warpdrive and Stucco for indoor growing. The kit includes:

• lamp / bulb: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open embossed Stucco 1 pc.

Attention: the kit does not include a cable from the ballast to the reflector!

LUMii Solar Pro 315W + 5m cable indoor growing lighting kit. The set consists of:

• LUMii SOLAR 315 W CDM Ballast 1 pc.
• LUMii SOLAR 315W Reflector – Wide Angle Version 1 pc.
• 5 m cable (connecting the ballast and reflector)

Note: the set does not include a bulb!

Osram 600W, LUMii Digita and PEARLPRO XL kit for indoor growing. The kit includes:

• bulb / lamp: dual-spectrum Osram Plantastar 600W 1 pc.
• ballast: electronic LUMii Digita 600W 1 pc.
• reflector: open PEARLPRO XL 1 pc.

Attention: the kit does not include a cable from the ballast to the reflector!

Osram 600W, MST and Azerwing Set for indoor growing. The set includes:

• bulb / lamp: dual-spectrum Osram Plantastar 600W 1 pc.
• ballast: MST 600W hybrid 1 pc.
• reflector: open Azerwing 1 pc.

Caution: the kit does not include cables or a plug!

Osram 600W, MST and PEARLPRO XL kit for indoor growing. The kit includes:

• bulb / lamp: dual-spectrum Osram Plantastar 600W 1 pc.
• ballast: hybrid MST 600W 1 pc.
• reflector: open PEARLPRO XL 1 pc.

Attention: the kit does not include cables or a plug!

Osram 600W, MST and Stucco lighting kit for indoor growing. The kit includes:

• bulb / lamp: dual-spectrum Osram Plantastar 600W 1 pc.
• ballast: hybrid MST 600W 1 pc.
• reflector: open textured Stucco 1 pc.

Caution: the kit does not include cables or a plug!

​250W indoor growing lighting kit. The kit includes:

• bulb / lamp: dual-spectrum Sylvania GroLux SHP-TS 250W 1 pc.
• ballast: magnetic Electrostart 250W 1 pc.
• reflector: open textured Stucco 1 pc.

Warning: the set does not include cables or a plug!

400W lighting kit for indoor growing. The kit includes:

• bulb / lamp: dual-spectrum Sylvania GroLux SHP-TS 400W 1 pc.
• ballast: magnetic Electrostart 400W 1 pc.
• reflector: enclosed LUMii AeroTube 125mm. 1 pc.

Warning: the set does not include a power cable or plug!

400W lighting kit for indoor growing. The kit includes:

• bulb / lamp: dual-spectrum Sylvania GroLux SHP-TS 400W 1 pc.
• ballast: magnetic Electrostart 400W 1 pc.
• reflector: open textured Stucco 1 pc.

Warning: the kit does not include a power cable or plug!

Set for flowering Philips 600W, LUMii Black and Azerwing for indoor growing.

• bulb / lamp for flowering: Philips MASTER GreenPower CG T 600W 1 pc.
• ballast: electronic LUMii BLACK 600W 1 pc.
• reflector: open Azerwing 1 pc.

Warning:

1. This set is for the flowering stage of indoor-grown plants!
2. The set does not include a cable from the ballast to the reflector!

The Secret-Icer set of 5 bags includes:

• yellow 190μm
• red 120μm
• green 70μm
• blue 45μm
• black 25μm

Bradas SPRING FLEX 15 m is a practical watering set that includes a spiral hose, multifunction spray gun, quick connectors and tap adapter. Thanks to its spiral construction, the hose extends to 15 metres during use and automatically retracts to its compact form after use. This prevents twisting, makes storage easier and provides comfort during daily watering.

SPRING FLEX is a compact and convenient solution for watering gardens, yards, terraces and balconies. The spiral hose is designed not to kink or tangle during use. After the water is turned off, it automatically returns to its original compact length, saving space and making storage easier.

The set includes a multifunction spray gun with 9 spray patterns, allowing a choice between a gentle mist for delicate plants, shower for flowers, concentrated stream for cleaning and other modes for various applications. Thanks to the included 2 quick connectors and a universal 1/2" and 3/4" tap adapter, the set is ready for use immediately after connection.

The lightweight construction and automatic retraction make SPRING FLEX an excellent choice for home gardens as well as camping, caravans, balconies and places with limited storage space.

Technical specifications

✔️ Manufacturer: Bradas

✔️ Series: SPRING FLEX

✔️ Model: WSF15

✔️ Type: Spiral garden hose set

✔️ Maximum working length: 15 m

✔️ Compact length when retracted: about 7.5 m

✔️ Hose type: Spiral, self-retracting

✔️ Colour: Black / orange

✔️ Spray gun with 9 spray patterns

✔️ Does not kink or twist

✔️ Universal tap adapter 1/2" / 3/4"

✔️ Suitable for standard quick connectors

📦 The kit includes

✔️ 1 × Spiral hose 15 m

✔️ 1 × Watering gun with 9 modes

✔️ 2 × Quick connectors

✔️ 1 × Tap adapter 1/2" / 3/4"

🔧 Use

Suitable for:

• Watering flowers

• Vegetable gardens

• Potted plants

• Yards and terraces

• Balconies

• Cleaning cars

• Cleaning bicycles and garden tools

• Camping and caravans

• Home use.

📋 Directions for use

1. Connect the adapter to the tap (1/2" or 3/4").
2. Fit the hose using the included quick connectors.
3. Select the desired spray pattern on the gun.
4. After use, turn off the water and release the pressure.
5. The hose will automatically retract to its compact form for easy storage.

Outlet for 13 mm tubing.

Duct flange kit for ⌀ 16-19mm profiles, Secret Jardin DF16 comes to the rescue when you want to create an additional air-exhaust opening in your tent. The kit contains: DF16 mount, screwdriver, screws, cutting tool.

• dimensions: 250 x 250mm
• internal diameter: ⌀ 150mm
• DF16 weight: 297g. without cardboard packaging
• suitable for profiles: ⌀ 16-19mm

Suitable for models: DS60, DS90, DS120, DS120W, DS150W, DP60, DP90, DP120, L100, L160, HS40, HS60, HS80, HS100, HS120, HS150, HS240W, HS300W.

Secret Jardin DF25 air-duct flange kit for ⌀ 25 mm profiles comes to the rescue when you want to create an additional air-extraction opening in your grow tent. The kit includes: DF25 holder, screwdriver, screws and cutting tool.

• dimensions: 385 x 385 mm
• inner diameter: ⌀ 250 mm
• DF25 weight: 610 g without cardboard packaging
• suitable for profiles: ⌀ 25 mm

Suitable for all models in the Dark Room range: DR150, DR240, DR300, DR240W, DR300W.

Hemp pads / growing media, certified for hydroponic cultivation of sprouts and microgreens in a home Babylon Garden system. The pads are made from 100% naturally processed industrial hemp, without chemicals (Cannabis Sativa).

• 24 single-use hemp pads
• dimensions: 12.5 x 18 cm
• 100% biodegradable

1. After each use, the single-use hemp pad can be used as compost and is 100% biodegradable.
2. As a plant, hemp has a negative carbon footprint, so each pack of 24 hemp pads stores approximately 480 g of CO₂.
3. Hemp is a natural insect repellent and is ideal for the organic Babylon Garden hydroponic system, which uses no inorganic nutrients or pesticides.

Hemp mats / growing media, certified for hydroponic growing of sprouts and microgreens in a home Babylon Garden system. The mats are made from 100% naturally processed industrial hemp without chemicals (Cannabis Sativa).

• 8 disposable hemp growing mats
• Dimensions: 12.5 x 18 cm
• 100% biodegradable

1. After each use, the disposable hemp mat can be composted and is 100% biodegradable.
2. Hemp as a plant has a negative carbon footprint, so each pack of 24 hemp mats stores approximately 480 g CO₂.
3. Hemp is a natural insect repellent and is ideal for the Babylon Garden organic hydroponic system, which uses no inorganic nutrients or pesticides.

• Can be connected to up to 40 ballasts
• Dual temperature safety, with built-in "Autodim" and "Auto shutdown" functions
• No changes in the supplied voltage
• "Sunrise" and "Sunset" function with gradual increase and decrease of light when lamps are switched on and off
• Displays supplied power as a percentage or in watts
• Calibrated temperature sensors

Gavita Master EL1 lighting controller

Using a Gavita Master controller to control Gavita e-series fixtures gives you maximum control, ease of use, safety and easy installation. Simply connect the controller cables to your fixture using the included T-splitter, set the fixtures to EXT (external control), connect the fixture and controller to the mains, and your lighting system is ready to use.

The controller can switch all connected fixtures on and off (up to 40 units), set the desired light output level of the fixtures (as a percentage or absolute value), and even simulate sunrise and sunset by gradually turning the lamps on and off.

Two important controller functions are automatic lamp dimming and emergency system shutdown. When the room temperature rises above the set parameters, it can seriously damage your crop, sometimes irreversibly. The temperature sensor detects this and reduces the lamp's light output to maintain the safe temperature limits you set. A warning LED on the display will inform you if this happens so that you can take action to remedy the problem. If, for any reason, temperature control in your room fails completely and temperatures rise to unacceptable levels, the system will shut down all equipment it controls in an emergency. The controller alarm can be connected to your alarm system for immediate notification of a problem. You can connect all your e-series fixtures to one controller.

Specifications here!

• Can be connected to up to 80 ballasts. Two separate rooms with up to 40 ballasts in each, or simply 1 room with up to 80 ballasts
• Option to control up to 2 other accessories (dehumidifier, heater, irrigation system, CO2 equipment) via Gavita ECM1
• Dual temperature safety, with built-in "Autodim" and "Auto shutdown" functions
• No changes in the supplied voltage
• "Sunrise" and "Sunset" function with gradual increase and decrease of light when lamps are switched on and off
• Displays supplied power as a percentage or in watts
• Calibrated temperature sensors

Gavita Master EL2 lighting controller

Using a Gavita Master controller to control Gavita e-series fixtures gives you maximum control, ease of use, safety and easy installation. Simply connect the controller cables to your fixture using the included T-splitter, set the fixtures to EXT (external control), connect the fixture and controller to the mains, and your lighting system is ready to use.

The controller can switch all connected modules on and off (the EL2 model can control two separate rooms with up to 40 ballasts in each, or one room with up to 80 ballasts), set the desired light-output level of the modules (as a percentage or absolute value), and even simulate sunrise and sunset by gradually starting and stopping the lamps as they are switched on and off. 

Two important controller functions are automatic lamp dimming and emergency system shutdown. When the room temperature rises above the set parameters, it can seriously damage your crop, sometimes irreversibly. The temperature sensor detects this and reduces the lamp's light output to maintain the safe temperature limits you set. A warning LED on the display will inform you if this happens so that you can take action to remedy the problem. If, for any reason, temperature control in your room fails completely and temperatures rise to unacceptable levels, the system will shut down all equipment it controls in an emergency. The controller alarm can be connected to your alarm system for immediate notification of a problem. You can connect all your e-series fixtures to one controller.

The model also has two ECM1 outputs, allowing you to switch other accessories in the room or rooms (heater, fan, irrigation system, dehumidifier, CO2 system) on and off with a load of up to 15A.

Specifications here!