Hydroponic and Irrigation Systems

The BOYU LK-100 air pump is specially designed for quiet operation, just like every SES air pump. The only difference is that the LK model has a higher flow rate and higher air pressure. It features an aluminium motor housing, good heat dissipation and a long service life.

• current: 230V, 50/60Hz
• power: 65W
• pressure: > 0.035Mpa
• flow rate: 100l/min / 6000l/h
• outlet diameter: ⌀ 19mm
• dimensions: 288 x 196 x 193mm

The conical rubber plug has a diameter of 26/32 mm and works as a stopper (like a cork). It is mainly used in commercial vessel systems (such as Ebb & Flow trays) to prevent leakage until the tray is flushed through the drain hole.

Detailed features

• Type: conical rubber plug, working like cork stoppers.
• Size: 26/32 mm (in the context of Ø 28–32 mm) — corresponds to the stated range.
• Application: Closes trays during flooding; after installation, when the plug is removed, it allows filling with fresh water and flushing soil and residues through the drain hole.

Recommendations for use

• When installed, the plug seals the tray completely, allowing flooding without leakage.
• After removing the plug, the system automatically allows waste to drain. This makes cleaning and preparing the tray again easier.

Benefits

The rubber plug is a practical and inexpensive solution for controlled filling and draining of trays. It is easy to fit and provides a reliable seal during filling; removing it allows efficient rinsing and cleaning without additional mechanisms. This gives maximum control over the irrigation cycle.

The carbon filter is made from high-quality raw materials with mechanical purification and water-softening effect. To improve purified-water quality, it uses a blend of bituminous coal and coconut-shell carbon meeting the highest NSF standards. Thanks to its improved formula, the purified water is softened and filtered from chlorine and mechanical particles down to 10 microns, making it clean and suitable for drinking.

The improved activated-carbon filter removes:

- chlorine and its derivatives
- organic compounds
- pesticides
- heavy metals: copper, lead, mercury
- radioactive elements: strontium, caesium
- softens water.
 
Advantages of the activated-carbon filter:
- improves water taste and smell
- high-quality product
- competitive price
- made from safe materials
- fast delivery
- made in Europe

Features:

- made from activated coconut-shell carbon and zeolite antimicrobial agent
- filters mechanical impurities, chlorine and heavy metals, and reduces water hardness
- operating temperature: 2 °C - 55 °C
- length 10 "
- replacement every 6 - 12 months, 37620 litres depending on the water

GrowMax MEGA GROW 1000 l/day  is a reverse-osmosis system optimised for gardening and hydroponic applications. Up to 1000 l/day – no waiting, processing up to 40 litres per hour!

• Reduces your EC. Helps stabilise pH.
• Eliminates 95% of salts and heavy metals.
• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Get 100% efficiency from your nutrients and fertilisers
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Wastewater-to-purified-water ratio: 2:1

Instructions for use here!

Information about the Reverse Osmosis Membrane here!

Troubleshooting the Reverse Osmosis Membrane here!

GrowMax MEGA GROW 1000 l/day can reduce the amount of contaminants by 99%. This system is intended for hydroponic or gardening applications. It is built to provide the maximum possible water flow from the membrane.

Recommended conditions for the water used:

• Water temperature: 25°C
• Water pressure: 60 psi / 4.3 kg/cm³
• TDS (Total Dissolved Solids): 500 ppm / 0,7 EC

Therefore, production will increase or decrease according to changes in the conditions listed above.

Removes or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediment, dirt, rust, oxidation, herbicides and pesticides, volatile organic contaminants (chemical pollutants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• sediment filter – approximately every 12000 litres of treated water or if clogged
• carbon filter – approximately every 12000 litres of treated water or depending on use
• membrane – membrane lifespan is between 6 months and 2 years, depending on water quality and replacement of the carbon filter, because chlorine is completely unsuitable for the membrane

*If the carbon filter is clogged, this will also have an effect and shorten the membrane's lifespan.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

AutoPot 1Pot Accessory Pack is an original set of spare and expansion components for AutoPot 1Pot systems with a 6 mm pipe system. The set includes the latest-generation AQUAvalve5, together with all essential parts needed to replace worn components or add another watering point to an existing AutoPot system.

AutoPot 1Pot Accessory Pack is a practical solution for maintaining and expanding AutoPot systems. Whether you wish to replace worn components or add another pot to an existing installation, this set contains all the essential elements needed to connect and operate a new module correctly.

At the heart of the set is the AQUAvalve5 – AutoPot's latest-generation automatic valve. It regulates the supply of water and nutrient solution to plants without electricity, pumps or timers. Thanks to its gravity-fed operating principle, the valve delivers water only when plants need it, allowing the growing medium to go through natural wetting and drying cycles.

The set also includes the Root Control Disc, which prevents roots from reaching the valve, and the Matrix Disc, which provides even water distribution at the base of the pot. The included tubing, connectors and grommet allow quick connection to the existing 9 mm AutoPot system.

All components are original AutoPot spare parts, made for full compatibility with 1Pot systems using 6 mm tubing.

Technical specifications

✔️ Manufacturer: AutoPot

✔️ Type: AutoPot 1Pot accessory pack

✔️ Compatibility: AutoPot 1Pot (9 mm)

✔️ Valve: AQUAvalve5

✔️ Pipe size: 9 mm

✔️ Original AutoPot replacement components

✔️ Suitable for system expansion or repair.

📦 The kit includes

✔️ 1 × AQUAvalve5

✔️ 1 × Matrix Disc

✔️ 1 × Root Control Disc

✔️ 1 × 6 mm pipe (1 m)

✔️ 1 × 6 mm T-connector

✔️ 1 × 16–6 mm cross connector

✔️ 1 × 6 mm Top Hat seal (rubber grommet)

✔️ Installation instructions.

Benefits

✔️ Original AutoPot components

✔️ Includes the new-generation AQUAvalve5

✔️ Easy installation without specialised tools

✔️ Suitable for system repair and expansion

✔️ Ensures reliable operation of the gravity-fed irrigation system

✔️ Compatible with all AutoPot 1Pot systems with 9 mm pipework

✔️ High-quality, long-lasting components.

Application

Suitable for:

• AutoPot 1Pot systems

• Replacement of worn components

• Expansion of existing AutoPot installations

• Automatic gravity-fed irrigation

• Home and professional plant growing.

📋 Instructions for use

1. Turn off the water supply to the AutoPot system.
2. Install the AQUAvalve5 in the relevant tray according to the instructions.
3. Place the Root Control Disc and Matrix Disc at the bottom of the pot.
4. Connect the supplied 6 mm pipe to the existing irrigation line using the included connectors.
5. Check all connections for a proper seal.
6. Fill the reservoir and test system operation before placing the plants.

⚠️ Important: The kit is intended for AutoPot 1Pot systems with 6 mm pipework. Before purchasing, check which type of pipe system you use to ensure full compatibility.

💡 Urban Botaniks tip: When replacing the AQUAvalve, it is advisable to replace the Root Control Disc at the same time, especially if the system has operated for several seasons. This will ensure trouble-free operation and prevent roots from reaching the valve.

GrowMax Filter Pack SUPER GROW is a set of replacement filters for the GrowMax SUPER GROW system.

The automatic Wassertech system for 10 plants is a kit powered by 4 AA batteries (not included), with a pressure pump, timer and up to 10m of hose that can be cut as needed. Suitable for indoor and outdoor use, it provides regular watering while you are away.

Detailed features

• Power supply: 4 x AA batteries, no mains electricity required.
• Pump: submersible pump delivering water from the reservoir to the plants.
• Hose: approximately 10m of hose, which can be cut to the required length.
• Control: timer with programmable watering frequency and duration.
• Consumption / weight: approximately 0.5 kg

Recommendations for use

• Use a reservoir with sufficient capacity if you will be away for several days — the larger it is, the longer the system can maintain watering.
• Set the timer according to your plants’ needs — frequency + duration. For example, you can set a frequency of 0.1 days for more intensive watering or skip several days depending on the season.
• Check the batteries regularly, especially in high temperatures or during prolonged use, to prevent watering from stopping.
• If the hose is long or has many branches, make sure the pump is powerful enough and the reservoir is close enough to maintain pressure.

Benefits

This system provides automated, convenient watering for up to 10 plants without mains electricity, suitable for balconies, greenhouses or temporary absences. With a timer and adjustable cycles, it ensures even, regular watering, while the hose and pump allow flexible installation for the space and plants’ needs.

AQUAbox Straight is designed to supply water and nutrients to plants of any type and size grown directly in soil.
AQUAbox Straight is attached to a single capillary wick that distributes water below the soil over an area of up to 4 square metres. With an AQUAvalve valve at its base, AQUAbox Straight draws from the water supply (water reservoir) only as much as the plants need, ensuring incredibly efficient water use. Plant roots instinctively grow towards the water source, attaching to the capillary wicks below soil level.

The AQUAbox contains the AQUAvalve valve technology but is designed to be placed directly in the ground; the capillary mat draws water from the AQUAbox and distributes it through the soil below.
The AQUAbox keeps your plants watered for days or weeks at a time, making it the ideal irrigation solution for weekends, holidays and year-round watering.

AutoPot AQUAbox Straight includes:

• 1x AQUAbox Straight Body
• 1x AQUAvalve valve
• 1x mini spirit level
• 1x 13mm–4mm built-in filter
• 1x AQUAbox Straight capillary mat
• 2m of 4mm tubing
• 1x full instructions

Tip: Make sure the capillary strips touch the bottom of the AQUAbox on both sides of the AQUAvalve valve after they have been rolled up.

? This water filter is designed for use with RAM wall humidifiers. It effectively removes mineral deposits and other contaminants from water, providing cleaner water and extending the life of your humidifier. It is especially recommended for areas with hard water.

? Detailed specifications:

• Manufacturer: RAM
• Type: Inline DI (deionisation) filter
• Compatibility: RAM Wall Humidifier
• Function: Removes mineral deposits and contaminants from water
• Wear indicator: A colour change from blue to gold indicates that the resin needs to be replaced
• Dimensions: Standard for connection to wall humidifiers
• Installation: Easy to install and maintain

? Recommendations and directions for use:

1. Disconnect the humidifier from the electrical mains and water supply.
2. Remove the old filter, if present.
3. Install the new RAM Inline DI Resin Water Filter, ensuring it is correctly positioned and secured.
4. Reconnect the humidifier to the water supply and electrical mains.
5. Check and maintain the filter regularly to ensure the humidifier operates optimally.

✅ Benefits of use:

• Improved water quality: Removes contaminants from the water, providing cleaner water for the appliance.
• Extended humidifier life: Prevents the build-up of mineral deposits that can damage the device.
• Easy maintenance: Quick and easy filter installation and replacement.
• Cost-effectiveness: Regular filter replacement can reduce the need for costly humidifier repairs.

BOYU SES-30 air pump is specially designed for quiet operation. It has an aluminium motor housing, good heat dissipation and a long service life. It is characterised by high flow rate and high air pressure.

• voltage: 230V, 50/60Hz
• power: 25W
• pressure: > 0.025Mpa
• flow rate: 30 L/min / 1800 L/h
• outlet diameter: ⌀ 13mm
• dimensions: 275 x 167 x 176 mm

Autopot propagation tray, with the option to connect it to an automatic irrigation system.

• Height: 28 cm
• Length: 120 cm
• Width: 55 cm

• Transparent lid with ventilation openings
• 2 coco mats (substrate), 3 cm thick
• AquaValve
• Copper-coated root control sheet – 115 cm × 51 cm
• 4 mm hose, 1 metre long
• Reducing T-piece – 13 → 4 mm
• T-piece – 4 mm
• Garland plastic tray, resistant to minerals and salts.

Video: https://www.youtube.com/watch?v=_OUN6sXH2wY

The FCPS-AB antibacterial mechanical filter is made of polypropylene foam that uses BACINIX^TM antimicrobial and antibacterial nano-silver technology. The FCPS5-AB filter retains particles down to 5 microns. This type of filter is especially suitable for the pre-filtration stage in standard 10” filter housings. The filter is chemical-resistant and designed for use with cold water in households, industry and laboratories.

FCPS5-AB mechanical filter cartridges, made of polypropylene fibres, are formed into foam whose density increases from the outside inward. This fibre structure contains microbubbles with openings, increasing the contact of filtered water with the filter. If the filtering surface of the FCPS5-AB filter element were unfolded, it would be the size of a football field.

Technical parameters of FCPS5-AB:

Size: 256 x 62 mm;
Outer diameter: 63.5 mm;
Inner diameter: 28 mm;
Flow rate: 20 l/min;
Maximum pressure: 6 bar;
Operating water temperature: +2°C to +42°C;
Service life: 5 to 8 months (depending on the quality and quantity of water purified by the filter, approximately 12000 litres);
Removes mechanical contaminants – sand, rust, silt;
Chemical-resistant;
Properties of the FCPS5-AB antibacterial mechanical filter:
increased purification capacity, thanks to the foamed internal structure;
BACINIX^TM nano-silver technology with antimicrobial and antibacterial protection;
long service life, high degree of filtration;
BACINIX^TM nano-silver technology destroys over 700 strains of bacteria while preventing mould and mildew;
FCPS-AB filter cartridges remove rust, sand, silt and all other dirt from water.
Do not use to purify water with unclear microflora or before disinfecting water!

T.A CultiMate AERO

If you want to try aeroponics at low cost, this is the system for you. It can be used throughout the entire growth cycle, only for a particular phase, or for mother plants. It is supplied in 2 versions according to the size of the mesh pots: 2" (5 cm) or 3" (7.5 cm).

The set includes:

• HX-8810 submersible water pump — 220 V, 20 W; flow rate 1000 L/h; head 1.95 m — with a 1-year warranty
• Large reservoir, allowing easy stabilisation of the working solution; ample room for roots

The system comes with clear, detailed instructions for assembly and use

GrowMax SUPER GROW  800 L/h is a high-capacity two-stage water filtration system, ideal for use in large gardens, nurseries and larger growing operations.

• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Get 100% efficiency from your nutrients and fertilizers.

Full product information here!

This system is designed as a standalone filter for the immediate removal of chlorine and sediment from water. It is rated to remove up to 99% of chlorine and can clean up to 90% of sediment above 5 microns. Having chlorine- and sediment-free water is essential for growing healthy plants and maintaining beneficial microorganisms, bacteria and fungi in the root zone and growing media. These microbes cannot survive in the presence of chlorine. Chlorine-free water is also essential for organic fruit and vegetables, hydroponics and every method of organic gardening in general. This filter is not designed to reduce the parts per million (PPM) of your water. Most of these PPM particles are minerals, which can only be removed by reverse osmosis systems.

REMOVES: chlorine, sediment, dirt, rust, oxidising herbicides and pesticides, volatile organic contaminants (chemical contaminants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• Sediment filter - approximately every 8000 litres of treated water or when clogged
• carbon filter – approximately every 25000 litres of treated water or according to its use (see the example below*)

*Example use:

• 1 hour per week (3200 L/month) - replace the filter 1 time every 8 months
• 1 hour per day, 4 days per week (12800 L/month) - replace the filter 1 time every 2 months
• 1 hour per day, every day (24000 L/month) - replace the filter every month
• 30 minutes per day, every day (12000 L/month) - replace the filter 1 time every 2 months

*Replacement time is relative, as it depends on the hardness of the water you use.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

Water Master Solar Irrigation Kit is an intelligent, fully autonomous irrigation system that uses solar energy. It enables automatic plant watering without electricity, cables or complex installations – an ideal solution for gardens, terraces and balconies.

The system operates through a solar panel that powers a pump and distributes water via hoses and drip emitters. This provides even, precise irrigation while saving water and energy.

With adjustable watering duration and frequency, the kit adapts to the needs of every plant. This ensures optimal growth with minimal effort, even when you are away from home. 

Key features

✔️ Solar panel: 1.5 W for autonomous operation
✔️ Pump flow rate: approx. 45 l/hour
✔️ Adjustable irrigation: from 15 sec. to 30 min.
✔️ Frequency: from 1–2 times per day to once every 7 days
✔️ 15 m hose (1/4") for covering a larger area
✔️ 15 micro-drippers for precise watering
✔️ Low-water-level sensor (to protect the pump)
✔️ Non-return valve and filter for a clean flow
✔️ USB-C charging in cloudy weather
✔️ Easy installation without tools

Benefits

✔️ Fully autonomous system – operates without mains power
✔️ Saves water through drip and controlled irrigation
✔️ Energy-efficient – uses solar energy
✔️ Custom settings tailored to plant needs
✔️ Ideal when away – waters automatically
✔️ Easy installation and minimal maintenance

 Application

Water Master Solar Irrigation Kit is suitable for irrigating pots, gardens, vegetable beds and greenhouses. An excellent solution for outdoor spaces without access to electricity.

A perfect choice for home gardeners and plant enthusiasts, who want convenience, efficiency and an eco-friendly way to keep plants healthy with little effort.

How to use:

Place the hose in the reservoir or connect it to the water supply.

Set the irrigation duration (15 sec – 30 min) and frequency (1–2 times per day to once every 7 days).

The solar panel supplies power to the pump and starts irrigation automatically.

The additional USB-C input allows charging even in cloudy weather.

Outlet for 13 mm tubing.

16 mm hose for AutoPot

Plastic air and water manifold with 8 outlets

Supply inlet: 8mm

Outlets: 8x4mm.

Suitable for hydroponic systems, distribution to air stones and aquariums.

Reliable and versatile submersible pump Hailea HX-8860 with a flow rate of 5 800 l/h and a maximum head of around 4,1–4,2 m — for ponds, fountain systems and recirculation. Water pump for installation inside or outside the reservoir. High-quality ABS plastic housing. Corrosion-resistant ceramic shaft, resistant to all solutions. Suitable for reservoirs of around 400L and drip systems. Flow rate: 5800L/h Water head: 4,1m Power: 130W Input voltage: 220-240V 50Hz Outlet diameter: 25mm Designed for continuous use. Removable filter allows use inside or outside the reservoir. Double water-cooled design for rapid heat dissipation. Suitable for all hydroponic needs — pumping, aeration, NFT and filtration. Suction cups for secure fixing in the reservoir.

Detailed features

• Model: HX-8860
• Material: corrosion- and impact-resistant ABS plastic housing
• Shaft / axle: aluminium-ceramic shaft (aluminium-zirconium ceramic)
• Power supply / voltage: 110-120 / 220-240 V (depending on version)
• Power: ~ 150 W
• Flow rate: 5 800 l/h
• Maximum head: around 4,1–4,2 m
• Outlet diameter: Ø 18 mm
• Dimensions: 242 × 145 × 170 mm
• Weight: around 2,9 kg

Features:

  • Suitable for fresh and salt water.
  • Double water cooling for rapid heat dissipation.
  • High-quality resin motor seal for ingress protection.
  • Filter / cover included for protection against debris.
  • Can operate submerged or externally.

Recommendations for use

• Install the pump securely using the rubber suction feet or a suitable surface mounting to reduce vibration.
• Use a hose with an internal diameter of 18 mm to connect to the outlet.
• Keep the filter clean — clean it regularly to prevent a drop in flow rate.
• The pump must not run dry: it must always be submerged or connected to a water flow.
• When installed outside water, ensure dust protection and stable mounting.
• If used for fountains or high jets, match the operating head to the elevation.

Benefits

The Hailea HX-8860 pump offers reliability, a robust housing and excellent performance — 5 800 l/h flow rate and up to ~4,2 m head. With its aluminium-ceramic shaft and double water cooling, it is suitable for a wide range of water applications — from ponds and recirculation to fountain systems.

BOYU FP-6000 submersible water pump 6000l/h is suitable for all hydroponic systems and those that require pumping of nutrient solutions. The shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to the smart design.

• voltage: 230V, 50/60Hz
• power: 105W
• max. water column height: 5.2m
• max. flow rate: 6000l/h
• outlet diameter: ⌀ 25mm
• dimensions: 162 x 133 x 209mm

Terra Aquatica’s EBB & GROW system is based on the proven EBB & FLOW design.

A water pump floods the tray holding the pots to deliver the nutrient solution.

This removes stale air from your plants’ roots; as the water drains back into the reservoir, fresh air enters the root zone.

• 95cmx95cm
• Height: 38cm
• Weight: 16.5kg
• Material: 100% recycled polyethylene
• Made in France

• Reservoir: up to 100 litres
• Tray 95x95cm
• Water level indicator
• Water pump SICCE - 600L/H – 6.5W – 240 Volts – 50/60Hz
• Fertilisers - T.A Flora GRO 0.5l; T.A Flora Bloom 0.5l; T.A Flora Micro Soft Water 0.5l; GHE Flora Micro HW 0.5l
• Fittings
• Inlet and outlet filter

This easy, reliable system is suitable for complete beginners as well as experienced growers.

Its compact size allows the system to be placed in any room, while its low height leaves ample space for your plants to develop.

The system is used with a timer, which regulates the irrigation cycle. If the irrigation period is shorter than 15 minutes, use a digital timer.

The system can be used with plastic pots as a lower-cost option, or fabric pots, which cost slightly more but allow even irrigation of the substrate.

You can use all types of substrate, including clay pebbles, coco substrates, soil and rockwool.

Holds up to 32 pots sized 15x15cm or 20 fabric pots of 4 litres each.

The EBB & GROW system is made using rotational-moulding technology, making it exceptionally strong and able to support the weight of pots filled with substrate and crop.

The system requires minimal attention; you can leave it unattended for several days without risking the crop.

The design prevents overflow and makes the system easy to maintain.

GrowMax Float Valve Kit is a set of a valve and fittings. It lets you fill your reservoir and leave it unattended without worry.

• 1/4" hose connector
• 3/8" hose connector
\r\n

T.A. CultiMate® L Solar is one of the most innovative and advanced hydroponic plant-growing systems, offering an exceptionally easy and effective way to grow plants without soil.

• made of super-strong and durable recycled plastic
• protection against UV and light, protecting the roots
• very low power consumption: < 2 W

• Dimensions L/W/H: 46 x 46 x 43 cm
• effective capacity: 45 l