Hydroponic and Irrigation Systems

T.A. HydroCloner Spinner 72 is a professional aeroponic system for fast and efficient rooting of cuttings. It provides optimal oxygenation and constant humidity, leading to faster development of healthy roots. Suitable for both beginner gardeners and professional applications.

Capacity: up to 72 cuttings at once — an ideal solution for mass plant propagation.

System type: aeroponic — the roots are sprayed with a fine nutrient mist, accelerating development and improving oxygen uptake.

Reservoir: around 60–70 litres — the large volume helps stabilise the pH and nutrient solution.

Dimensions:  67 × 67 × 31 cm — compact construction relative to its capacity.

Motor: Vortex / Spinner motor (12V) — provides constant movement and oxygenation of the solution.

Technology: micro-misting (mist/spray), which keeps the stems constantly moist and stimulates rapid rooting.

Material: made from durable, UV-resistant recycled plastic — suitable for long-term use.

Design: neoprene collars are included to hold cuttings securely and allow easy cleaning and reuse.

Application: suitable for hydroponics, coco* and soil* cultivation — for preparing seedlings or clones.

Recommendations for use:

Preparation: fill the reservoir with water or nutrient solution and maintain a temperature of around 20–22°C for optimal results.

Placing cuttings: secure the cuttings in the neoprene holders so that the stem is in the spray zone.

Additives: use a root stimulator* for faster, more uniform development.

Maintenance: clean the system regularly and check the spraying mechanism for optimal operation.

Ventilation and hygiene: maintain a clean environment and good air circulation to reduce the risk of disease.

GrowStream 20

Aeroponic system with twenty planting sites. Known for its high yields, Growstream is now available on the Bulgarian market. GrowStream aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient while optimising productivity. Each system includes instructions and a free T.A Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 130/67/44 cm
• Effective capacity: 90 L

GrowStream 20

Aeroponic system with twenty planting sites. Known for its high yields, GrowStream 20 is now available on the Bulgarian market. AeroFlo aerates the nutrient solution exceptionally well, delivering oxygen, water and nutrients to the roots in ideal combinations. This system makes plants stronger and more resilient while optimising productivity. Each system includes instructions and a free GHE Flora Gro+Bloom+Micro x 1L kit

• Dimensions: 130/67/44 cm
• Effective capacity: 90 L

Countless gardeners, scientists and researchers are convinced that no other system delivers such good results. NASA scientists have used these systems for 15 years to explore the potential of hydroponic methods. GrowStream systems are modular and expandable, and easily adapt to different applications: the GS14 fits easily on a balcony or even behind a window; the GS60, with its large reservoir, is suitable for a greenhouse; the GS20 and GS28 are low enough to fit in a tunnel greenhouse or home greenhouse; the GS56 B and GS84 B are even lower (32 cm), suitable for more professional needs. GHE also delivers custom projects according to customer requirements.

GrowMax RO Membrane 150GPD is a reverse osmosis membrane that removes or reduces by up to 95% all mineral salts and heavy metals from tap water. It purifies up to 20 L/h. (500 L/day) and is suitable for:

• Power Grow
• Mega Grow
• Maxquarium

Short description:

BubbleGen is a dual jet bubble generator with an integrated silencer that quietly and efficiently enriches and circulates the nutrient-solution reservoir with oxygen. It works without noisy compressor pumps and air stones, using atmospheric pressure to create an oxygen-rich jet of bubbles and nutrient solution.

Product features:

• Quiet and efficient oxygenation: Perfect for hydroponic reservoirs.
• No compressors needed: Eliminates the need for noisy air pumps.
• No air stones: Prevents clogging and the growth of bacteria and algae.
• Replaces circulation pumps: No additional nozzles or circulation pumps are needed.
• Vacuum operation: Avoids heating the solution.
• Flexible air supply: Can be powered from various sources (1.5 m hose included).
• Energy-saving: Reduces the cost of air and circulation pumps.
• Wide operating range: Works with pumps from less than 1000 LPH to over 4000 LPH.
• Easy installation: Three suction cups included for secure attachment to the bottom of the reservoir.

Advantages:

1. Eliminates the need for additional equipment: BubbleGen replaces air pumps, air stones and circulation pumps.
2. Quiet operation: Ideal for environments requiring minimal noise.
3. Energy efficiency: Significantly reduces energy costs.
4. Easy integration: Can be connected to a nutrient-solution chiller in existing systems.

Technical details:

• Material: Durable, corrosion-resistant housing.
• Installation: Accessories included for easy fitting.
• Compatibility: With pumps from 1000 to 4000 LPH.
• Length of included air hose: 1.5 m.

BubbleGen is an ideal solution for hydroponic systems, offering an innovative and efficient approach to oxygenation and circulation while reducing costs, noise and system complexity.

Tecoponic HY2000 Chiller – Water cooler for hydroponic systems

Short description:

•  Precision cooling: Maintains the ideal nutrient-solution temperature (5°-35°C).
•  Energy efficiency: High-quality compressors and a titanium heat exchanger for low consumption.
• Convenient design: Compact and suitable for aquariums and systems up to 2000 litres.

Detailed description:

The Tecoponic HY2000 Chiller is a high-quality water chiller designed for hydroponic systems and aquariums up to 2000 litres. Thanks to its advanced technology, it maintains the optimum nutrient-solution temperature needed for healthy plant growth.

Key features:

• Cooling technology: Eco-friendly R134a refrigerant and a titanium heat exchanger for high performance and energy efficiency.
• Digital thermostat: Precise temperature reading with adjustment in the 5°-35°C range and 0.1°C resolution.
• Efficient design: Compact, rust-resistant housing, easy maintenance with a magnetic air filter.
• Unique feature: Built-in heater for continuous temperature maintenance in all conditions.

Technical data:

• Power supply: 230V-50Hz
• Power consumption: 440W
• Flow rate: 600 L/h - 800 L/h
• Dimensions: 31 x 31 x 51 cm
• Weight: 21.4 kg
• Connections: 3/4" fitting

Water Master is a high-quality digital timer for irrigation, specifically designed to control drip irrigation systems and sprinkler irrigation.

• uses an efficient solenoid valve
• up to 8 watering cycles per day
• programming the frequency and watering duration
• easy and quick to install on any tap

Technical specifications:

• Connections: ¾ male and ¾ female connector
• Batteries: 2 x AAA (not included)

Medusa multi-outlet dripper with 6 independent branches and a flow rate of 12 L/h — for even irrigation of up to 6 plants. With a self-compensating dripper.

Detailed features

• Number of outlets: 6  
• Total flow rate: 12 L/h (average ~2 L/h per outlet)
• Type: self-compensating dripper — the device maintains a constant flow rate despite minor pressure fluctuations
• Capillary length: ~60 cm for each outlet branch
• Tube type: 4 mm diameter microtube.
• Suitable for installation on pipes with a diameter of 16 to 32 mm.

Recommendations for use

• Install the dripper in a system with maintained pressure and filtration to prevent clogging.
• Keep the system clean. Flush it periodically to prevent clogging.
• Use suitable fittings to connect 25 mm pipes and microtubes.

Benefits

The Medusa 6-outlet 12 L/h dripper is a reliable solution for precise, even irrigation of a group of plants. Its self-compensating technology ensures a constant flow rate at low pressure.

We offer two sizes for our drip irrigation types:

Ø4 mm

Plastic air and water manifold with 8 outlets

Inlet: 8mm

Outlets: 20 x 4mm.

Suitable for hydroponic systems, distribution to air stones and aquariums.

HDPE PN10 pipe adapter (connector)

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimal limits is essential for preserving oxygen levels and protecting roots from pythium* and other diseases.

With the Hailea HC-150A 250–1200 l/h chiller, controlling water temperature in your hydroponic system or aquarium is easier than ever!

• Compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• Automatic overheating shut-off
• For reservoir/aquarium volume: 150 l

The chiller is designed to operate with a water pump with a flow rate of 1000L/h (sold separately).

Instructional video: here.*

Features:

• Model: HC-150A
• Recommended flow rate: 250–1200 l/h
• For reservoir/aquarium volume: 150 l
• fittings: ⌀ 12 or ⌀ 17 mm (included)
• Power: 1/10 HP
• Power consumption: 170 W
• voltage: 220-240V, 50Hz
• Current: 1.1 A
• Dimensions: 420 x 248 x 365 mm
• Weight: 15.0 kg
• warranty: 1 year

Recommendations: Clean the chiller every 3–4 months to remove mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours, then rinse with water. Also ensure you place an air-circulation fan near the chiller to avoid heat buildup.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling-performance testing is shown at an ambient temperature of 30°C, water temperature before cooling of 28°C, set temperature of 16°C and no more than 150 litres of chilled water. As water cooling is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

T.A. CultiMate® S is one of the most innovative and advanced hydroponic plant-growing systems, offering an exceptionally easy and efficient way to grow plants without soil.

• made from super-strong and durable recycled plastic
• protection against UV and light, protecting the roots
• very low power consumption: < 2 W

• dimensions L/W/H: 30.5 x 30.5 x 37 cm
• effective capacity: 15 L

Compression fitting tee 20x20x20 for PE pipes.

Maximum working pressure: 10 bar.

Water Master ACO-818 with 20 outlets (300 l/min) is an air compressor with an advanced compression system and exceptionally quiet operation. It contains special synthetic rubber to keep output and air pressure constant over time. Its small, compact design ensures a long service life with minimal energy consumption. 

• exceptionally quiet
• constant air pressure
• small and compact
• long-lasting use
• energy efficient

Technical specifications:

• voltage: 220V / 50Hz
• power: 385 W
• flow rate: 300 l/min (18000 l/h)
• pressure: 0.05 MPa
• outlets: 20 pcs.
• dimensions: 30.5 x 15.5 x 18.8 cm
• weight: 6.5 kg

Compression End Cap 25 for PE pipes.

Maximum working pressure 12,5 bar.

Compact and multifunctional submersible pump Hailea HX-2500 with a flow rate of up to 650 l/h and a maximum head of ~1.3 m, with a built-in mixer for air intake — suitable for hydroponic systems and solution circulation.

Detailed features

• Model: HX-2500 — submersible water pump with a fixed flow rate of 650 l/h ­
• Maximum head: ~ 1.30 m ­
• Power supply / voltage: 230 V / 50 Hz ­
• Power: 12 W ­
• Outlet diameter / connection: 14.5 mm
• Shaft / axle: stainless steel, suitable for fresh and salt water ­
• Housing: ABS plastic, corrosion-resistant
• Built-in mixer / attachment for oxygenating the solution (O₂) ­
• Installation: rubber suction feet for securing to surfaces, ensuring stability during submerged operation ­
• Operation at a low water level — ability to function with limited water supply ­

Recommendations for use

• Install the pump on a flat surface using the rubber suction feet to minimise vibrations.
• Use a hose with an internal diameter of ~ 14.5 mm (or a suitable adapter) for the outlet to maintain the stated flow rate.
• Use the built-in mixer / Venturi system to add air to the solution — it improves oxygen content and stimulates root growth.
• Cleaning the intake cover / filter — periodically remove debris to protect the pump from clogging and reduced flow.
• Do not allow the pump to run dry: it must be at least partially submerged or connected to a water flow.
• When using nutrient solutions (especially with fertilisers), check material compatibility (ABS housing, stainless steel) with the concentrations.

Benefits

Hailea HX-2500 is a compact yet feature-rich pump with a flow rate of 650 l/h and a head of ~1.3 m. It provides stable operation in low-water environments, a built-in mixer for solution aeration, and a design suitable for hydroponic systems and circulation. Its small size and low power consumption make it a suitable choice for systems with limited space and specific needs.

Discover a new generation of filtration systems with AGRO! We present our latest development: a type "D" inline disc filter in size 3/4", ideal for your gardening and agricultural applications.

These tees are ideal for reducing 13 mm tubing to 4 mm tubing when using large systems. They are inserted inline at the point where the AQUAvalve valve or aquaPot is located. They provide a watertight connection, unlike many other types of reducing fittings. They work in exactly the same way as the AutoPot 13-4 mm cross connector, but this fitting has one 4 mm tubing connection, while the cross connector provides two 4 mm tubing connections.

GrowMax GROWMAX 3000 L/day is a reverse osmosis system optimised for gardening and hydroponic applications. Up to 3000 L/day — no waiting, processing up to 125 litres per hour!

• Reduces your EC. Helps stabilise pH.
• Eliminates 95% of salts and heavy metals.
• Eliminates 99% of chlorine and 90% of sediment down to 5 microns, instantly!
• Get 100% efficiency from your nutrients and fertilisers
• Faster-growing and healthier plants, flowers and vegetables.
• Strengthens plant roots.
• Great for organic production!
• Protects beneficial microorganisms in your soil.
• Wastewater-to-purified-water ratio: 2:1

Instructions for use here!

Information about the Reverse Osmosis Membrane here!

Troubleshooting the Reverse Osmosis Membrane here!

GrowMax GROWMAX 3000 L/day can reduce contaminants by 99%. This system is intended for hydroponic or gardening applications and is designed to provide maximum water flow from the membrane.

Recommended conditions for the water used:

• Water temperature: 25°C
• Water pressure: 60 psi / 4.3 kg/cm³
• TDS (Total Dissolved Solids): 500 ppm / 0,7 EC

Therefore, production will increase or decrease according to changes in the conditions listed above.

Removes or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediment, dirt, rust, oxidation, herbicides and pesticides, volatile organic contaminants (chemical pollutants, benzenes, toluene, oils, trihalomethanes, detergents, polychlorinated biphenyls)

When to replace the filters:

• carbon filter - approximately every 25000 litres of treated water, or according to use
• membrane – membrane lifespan is between 6 months and 2 years, depending on water quality and replacement of the carbon filter, because chlorine is completely unsuitable for the membrane

*If the carbon filter is clogged, this will also have an effect and shorten the membrane's lifespan.

Warranty:

• The product has a 1-year warranty.
• When you register your product here, you will automatically receive one more year of warranty for your product, for a total of 2 YEARS PRODUCT WARRANTY.

D-type inline disc filter with 1" male threaded connection.

Two 1/4" male threaded outlets for pressure gauges.

To install pressure gauges, drill openings at both outlets (1/4"). Install the pressure gauges using a 1/4" coupling.

See related products.

Filtration rating - 120 mesh (130 microns)

Vontron 100 GPD reverse osmosis membrane. Output 380 L/24 hours. Compatible with standard domestic reverse osmosis systems. Used as the fourth stage of water purification in home reverse osmosis systems.

Technical specifications:

Operating pressure 2.8-6 atm

Operating temperature from +2 to +45^oC

Output 380 L/24 hours

Pore size 0,001 µm

Osmotic membrane module size 30 cm x 4.5 cm

Purification efficiency 95%

Inlet water pH range 2-11

Inlet water range – short-term resistance (30 min.) – 1-12

Chlorine resistance up to 0.1 ppm

Maximum water hardness: 400 mg CaCO3

Maximum salinity 2000 ppm

Maximum turbidity 1 NTU

Maximum iron and manganese content: < 0,05 ppm

Active membrane surface area 0.46 m2

Quick Valve is the fastest and most commonly used valve for EBB & Flow trays. It is dual-channel: one channel fills the tray and the other drains it. When the water supply stops, the valve automatically drains at ~28 l/min. It comes standard with an internal opening of 4 mm (other diameters available on request). Installation beneath filters is recommended to protect against leaves, soil and debris.

Detailed features

• Function: dual-channel (fill + drain); the drainage channel oxygenates the irrigation water during filling for better root development.
• Filling flow rate: ~9–40 l/min depending on pressure and the internal diameter of the opening; standard 4 mm, other diameters on request.
• Automatic drainage: ~28 l/min when water supply stops.
• Manual bottom valve: yes — lets you avoid filling a specific table/tray.
• Connections (options):
  • ¾″ hose
  • ½″ hose
  • PE 8×10.5 mm and 10×12.5 mm
  • PE 6×8 mm
• Installation: countertop hole Ø 27 mm for recessed fitting; can be installed beneath sump plastic filters.
• Durability: designed for years of use in a demanding production environment.

Recommendations for use

• Select the internal opening (mm) according to the available pressure to achieve the desired filling flow rate.
• Install the valve under a filter (sump) to prevent blockage by debris.
• When you need to shut off a particular table, use the manual bottom valve.

Summary – Benefits

• Fast filling with an adjustable flow rate based on opening size and pressure.
• Automatic drainage of ~28 l/min when water supply stops.
• Improves irrigation water quality through oxygenation during filling.
• Flexible options for ½″, ¾″ and PE connections.
• Durable construction for a long service life in greenhouse conditions.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-100A Chiller 1500 - 4000L/h, controlling water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a reservoir / aquarium with a volume of: 1000 L

The chiller is designed to operate with a water pump with a flow rate of up to 4000L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-1000A
• recommended flow rate: 1500 - 4000 L/h
• for a reservoir / aquarium with a volume of: 1000 L
• fittings: included
• power: 1 HP
• power consumption: 780 W
• voltage: 220-240V, 50Hz
• current: 3.2 A
• dimensions: 520 x 400 x 480 mm
• weight: 31.3 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling performance is shown when the ambient temperature is 30°C, the water temperature before cooling is 28°C, the set temperature is 16°C and the chilled water volume is no more than 1000 litres. As the amount of water being cooled is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.