Hydroponic and Irrigation Systems

A reliable, easy-to-set-up water timer for a single irrigation zone — it automates watering in a garden, greenhouse, or on a balcony, so plants receive water regularly without manual intervention.

• Type: 1-zone digital water timer.
• Operating pressure: 0.5–8 bar (≈ 7–116 PSI).
• Maximum flow rate (throughput): up to 35 L/min.
• Watering duration: from 1 to 240 minutes (up to 4 hours).
• Watering frequency: every 1–12 hours or at intervals of 1–7 days — selected according to plant needs.
• Power supply: 2 × AA (1.5 V) batteries.
• Operating temperature range: 3 °C–50 °C.
• Valve / connections: standard threads for tap and hose.
• Low-battery indicator and frost protection — at temperatures below ~3 °C, the device should be removed to prevent damage.
• Operating modes: automatic (scheduled), manual watering (without changing the main schedule), and a "Rain-Delay" option (postponement in rain/high humidity).

Recommendations for use

• Install the timer on a standard garden tap or hose, before the pipe/hose leading to the plants.
• Set a schedule: choose a convenient start time, duration, and frequency — this allows regular watering without manual intervention.
• When you are away or have an unpredictable schedule, the timer ensures that plants receive water even when you are not there.
• For winter: remove the device if frost is expected — the water inside may freeze and damage the housing.
• Maintain normal pressure (0.5–8 bar) and good flow rate — excessively low or high pressure, or clogged filters, can disrupt watering.

4/7 mm Flexible Hose – 100 metres

The flexible hose with a 4mm internal diameter and 7mm external diameter is designed for irrigation systems, especially drip and micro-sprinkler installations. Made of high-quality polyethylene (PE), this hose is resistant to UV rays and weather conditions, making it suitable for long-term outdoor use.

Advantages:

• Flexibility: Easy to install and handle, even in complex garden layouts.

• Durability: Resists UV rays and weather conditions, preventing cracking and ageing.

• Compatibility: Suitable for use with various fittings and drip components.

• Efficiency: Ensures even water distribution for optimal plant irrigation.

Technical specifications:

• Internal diameter: 4 mm

• External diameter: 7 mm

• Length: 100 metres

• Material: Polyethylene (PE)

• Colour: Black

• Operating temperature: -10°C to +60°C

Applications:

This hose is ideal for use in:​

• Drip irrigation systems​

• Micro-sprinkler systems​

• Gardening and greenhouses​

• Agricultural applications​

? Terra Aquatica GrowStream10 V2 is a high-efficiency aero-hydroponic system designed for growing up to 10 plants. With its innovative features and improvements over the previous version, it provides optimal growing conditions while saving water and energy. 

Detailed features

• Number of plants: 10
• Dimensions (L x W x H): 109 x 49 x 57 cm
• Reservoir capacity: approximately 45 litres
• Channel dimensions: 18 cm (width) x 14.7 cm (height)
• Pot dimensions: 8 cm diameter
• Plant spacing: 18.5 cm (centre to centre)
• Pump: Syncra 1.0 with a flow rate of 950 L/h, 16 W
• Materials: UV-resistant double-wall channels and lids, made from recycled materials
• Distribution system: Flexible T-connectors for adaptable plant positioning
• Additional accessories: Drainage kit and cleaning brush

Recommendations for use

• Preparation: Assemble the system according to the supplied instructions.
• Filling: Add nutrient solution and washed clay pebbles to the pots.
• Planting: Transfer the plants from a hydroponic propagator, such as HydroCloner® Spinner 72, into the pots.
• Setup: Connect the pump and set the watering intervals according to the plants' needs.

Benefits

• Optimal aeration: Keeps plant roots in aerobic conditions, which promotes rapid growth.
• Efficient water use: The closed system minimises water loss.
• Flexibility: The distance between plants can be adapted to their needs.

Easy maintenance: Improved construction for easy cleaning and component replacement

T.A - GrowStream 40 is the most productive, most efficient and most adaptable hydroponic system on the market!

• for 40 plants
• L/W/H dimensions: 210 x 103 x 59 cm
• reservoir volume: 200 L

Based on the same technology as Aeroflo® and incorporating a series of improvements that make the system more user-friendly without compromising quality. The new system has a removable lid and rounded corners for easy cleaning, double walls on both the channel and the lid for better insulation, while the irrigation line is inside the chamber to prevent any leaks. The size is slightly larger than the Aeroflo® system to create more root space and allow for a higher water capacity, making it suited to large plants. The result is a versatile system in which you can choose to grow small or large plants. It is the only hydroponic system on the market adapted for growing large plants, not just lettuce or herbs!

GrowStream® systems are operated by a standard water pump in the reservoir, which pumps water to the main plant tube, where it flows at precisely set intervals. The nutrient solution then runs down the slope of the tube, perfectly oxygenating the nutrient reservoir: no unnecessary controllers or separate air pumps – GrowStream® is exceptionally easy to assemble and operate, so you can focus on growing plants rather than maintaining the system.

Assembly instructions: here*

13mm Four-Way Connector for irrigation systems

25mm Hose (FLEXI PIPE), 30m roll. is a high-quality flexible hose designed for a wide range of applications in gardening, hydroponic systems, irrigation and other industrial needs. Made from durable materials, this hose (tubing) offers excellent flexibility and longevity.

Key features:

• Diameter: 25 mm

• Roll length: 30 metres

• Material: Flexible PVC with UV protection

• Colour: Black

• Working pressure: Up to 6 bar

• Temperature range: -10°C to +60°C​

Advantages:

• UV resistance: Protects against ageing and cracking caused by sun exposure.

• Flexibility: Easy to install and handle, even at low temperatures.

• Versatility: Suitable for use in various irrigation and hydroponic systems.

• Durability: Withstands mechanical loads and weather conditions.​

Applications:

• Drip irrigation systems

• Hydroponic installations

• Gardening and greenhouses

• Industrial applications requiring flexible connections

A porous diffuser (aeration ring) in a ring shape, designed to produce numerous fine bubbles and provide optimal aeration for reservoirs, hydroponics and aquariums.

Detailed specifications:

• Material: rubber/polymer housing with numerous micropores for generating fine bubbles.
• Format: ring-shaped or straight, in a 180mm size.
• Porosity / bubbles: very fine bubbles for higher oxygen-transfer efficiency.
• Inlet nozzle: the 180mm version uses an 8mm inlet fitting.
• Installation: includes rubber suction feet for securing it to the reservoir/aquarium surface.
• Retention and durability: minimal maintenance; long service life with proper use.
• Applications: for aerating hydroponic systems, reservoirs and aquariums, and improving oxygen content in water.

Recommendations for use:

• Before first use: briefly fill the diffuser with water (soak it) to activate the pores and ensure even operation.
• Connect the inlet to a compressor or air pump using a compatible hose and fitting.
• Place the diffuser on the bottom of the reservoir for the best distribution effect.
• Keep the surface and pores clean — rinse regularly or clean gently to prevent clogging.
• Use suitable airflow strength — excessive pressure may damage the pore structure and lead to uneven bubbles.
• Secure the diffuser firmly with the suction feet to prevent it from moving under air pressure.

Benefits

This ring-shaped aeration diffuser produces very fine bubbles, increasing oxygen exchange in the water. It is easy to install and maintain, and is suitable for a variety of uses — from plant systems to aquariums and reservoirs.

The BOYU FP-5000 submersible water pump, with a flow rate of 5000 L/h, is suitable for all hydroponic systems and systems that require pumping nutrient solutions. Its shaft is non-corrosive, and all parts are insulated, waterproof and sealed. Disassembly and cleaning are easy thanks to its intelligent design.

• voltage: 230V, 50/60Hz
• Power: 85W
• Maximum head height: 4.5 m
• Maximum flow rate: 5000 L/h
• Outlet diameter: ⌀ 25 mm
• Dimensions: 162 x 133 x 209 mm

GrowMax Filer Pack GARDEN GROW is a set of replacement filters for the GrowMax GARDEN GROW system.

Compression fitting adapter with female thread 16x1/2" for PE pipes.

Maximum working pressure 12,5 bar.

Wilma 20

The hydroponic system Wilma 20 is lightweight, user-friendly and easy to move. Pots of 6.5, 11 or 18 litres can be placed in each 4/8/10/16/20 tray. This gives plants sufficient room for optimal development. Wilma growing systems are lightweight, portable and stable, allowing plants to remain upright even once fully grown. Wilma growing systems are specially designed for professional growers! For 20 plants per 1 m². Suitable for use with rockwool, clay pebbles, coco or soil!

Dimensions: 119 cm length x 117 cm width x 48 cm height

Reservoir volume: 140 litres.

GrowMax 10" x 2.5" De-Ionization Filter Kit is a kit containing a deionization filter and its components:

• 10" blue housing
• white metal bracket with screws
• 10" deionization cartridge
• 1/4" quick-connect fittings
• 3 m 1/4" white hose
• tightening wrench
• in-line shut-off valve

Drip irrigation valve with a barbed take-off, without a rubber seal, with locknut for 16mm multi-season drip hose

Recommended for installing on LDPE pipes Ø25 and Ø32.

To install the valve, drill an Ø8 hole in the pipe. Use an Ø8 punch to make the hole (see related products).

Push the tapered part of the valve’s take-off through the hole you made in the pipe.

Tighten the take-off locknut.

Water Master ACO-001 with 6 outlets (20 l/min) is an air compressor with an advanced compression system and exceptionally quiet operating levels. It contains special synthetic rubber to keep output and air pressure constant over time. Its small, compact construction provides a long service life with minimal energy consumption. 

• exceptionally quiet
• constant air pressure
• small and compact
• long-lasting use
• energy efficient

Technical specifications:

• voltage: 220V / 50Hz
• power: 20 W
• flow rate: 20 l/min (1200 l/h)
• pressure: 0.016 MPa
• outlets: 6 pcs.
• dimensions: 15.6 x 8.2 x 10.4 cm
• weight: 1 kg

Cover for Sump is a cover designed to seal an existing sump in a tray when you wish to disconnect it from the system. Covering it prevents contaminants from entering and makes it easy to deactivate the sump in the tray without removing it. 

Detailed features

• Product type: sump cover — used when you wish to "remove" or deactivate the sump in a tray.
• Installation instructions:
  1. Clean and dry the area around the sump.
  2. Apply Staal & Plast adhesive along the edge of the cover and allow it to bond.
  3. Seal the edges to ensure a tight, waterproof finish.
• Note: For optimal results, follow the instructions in the dedicated technical glue product sheet ("glue product sheet").

Recommendations for use

• Ensure the surface is properly prepared — clean and dry — before bonding.
• Use the original Staal & Plast adhesive product to ensure stability and durability.
• Seal the edges of the cover after installation to prevent dirt and moisture from entering.

Benefits

The sump cover allows easy and secure deactivation of the sump in a tray without dismantling it. It makes system management easier when a temporary or long-term change is needed, while preventing contamination through strong bonding and quality sealing.

Maintaining a constant nutrient-solution temperature in hydroponic systems (NFT and DWC) within optimum limits is extremely important for preserving oxygen levels and protecting roots from Pythium* and other diseases.

With the Hailea HC-100A Chiller 200 - 1000 L/h, controlling the water temperature in your hydroponic system or aquarium is easier than ever!

• compatible with fresh and salt water
• environmentally friendly refrigerant R134a
• low noise levels
• easy-to-use digital controller
• function for automatic shutdown against overheating
• for a reservoir / aquarium with a capacity of: 100 L

The chiller is designed to operate with a water pump with a flow rate of 1000 L/h (sold separately).

Instructional video: here.*

Features:

• model: HC-100A
• recommended flow rate: 200 - 1000 L/h
• for a tank / aquarium with a capacity of: 100 l
• fittings: ⌀ 13 mm (included)
• power: 1/20 HP 
• power consumption: 130 W
• voltage: 220-240V, 50Hz
• amperage: 0.6A
• dimensions: 338 x 218 x 325 mm
• weight: 9.2 kg
• warranty: 1 year

Recommendations: The chiller should be cleaned every 3 - 4 months to remove any mineral deposits and limescale. Simply fill the chiller with clear vinegar, leave it for 24 hours and then rinse with water. Make sure you also place an air-circulation fan near the chiller to avoid heat build-up.

Please note:

1. The flow rate is determined according to the pump's maximum flow (submersible pump or another external power filter) and the circulation equipment.
2. Cooling performance is tested at an ambient temperature of 30°C, a pre-cooling water temperature of 28°C, a set temperature of 16°C and a chilled-water volume of no more than 100 litres. When the amount of water being cooled is reduced, the water temperature will drop.
3. Cooling efficiency is determined by the installation location, heat source, lighting, pump filter and other connecting parts. Special pumps and other accessories sold with Hailea series chillers must be used. Do not use alternatives to avoid affecting appliance performance.
4. When there is insufficient air exchange in a room, cooling efficiency is reduced if the ambient temperature rises due to heat from the unit.

Complete vertical hydroponic kit, made in Italy, for growing fruit, vegetables and herbs in limited space — without soil, with nutrient solution circulation.

Detailed features

• Manufacturing: Made in Italy — an Italian vertical gardening system.
• Construction: a vertical tower with planting modules arranged along its height.
• Crops: suitable for growing a variety of plants (vegetables, herbs, etc.) in the modular system.
• Water circulation: a nutrient solution circulation system that provides constant contact between the roots and the growing medium.
• Eco-friendly and sustainable approach: designed for autonomy, independence and year-round soil-free growing.
• Maintenance: the system is designed for easy operation and maintenance throughout the entire growing cycle.

Recommendations for use

• Install the system on a stable, level surface — the vertical structure requires good support.
• Ensure suitable power supply and a pump for nutrient solution circulation.
• Follow the recommended nutrient solution concentrations and intervals to avoid overfeeding or deficiencies.
• Use quality lighting (for indoor growing) or position the system in sunlight for an outdoor installation, to support healthy photosynthesis.
• Check the system for blockages, wear or sediment along the nutrient solution flow path.
• Replace the solution periodically (partially or completely) to maintain a balanced supply of micronutrients.

Benefits

Hydroponic Vertical Garden complete kit offers a modern approach to urban, space-efficient gardening. Without soil and with nutrient solution circulation, the system enables high yields in a limited vertical space. Italian manufacturing and eco-friendly design add value and reliability.

Water Master ACO-004 with 8 outlets (60 l/min) is an air compressor with an advanced compression system and exceptionally quiet operation. It features a special synthetic rubber to keep output and air pressure constant over time. Its small, compact design gives it a long service life with minimal energy consumption. 

• exceptionally quiet
• constant air pressure
• small and compact
• long-lasting use
• energy efficient

Technical specifications:

• voltage: 220V / 50Hz
• power: 55 W
• flow rate: 60 L/min (3600 L/h)
• pressure: 0.035 MPa
• outlets: 8 pcs.
• dimensions: 19.8 × 9.9 × 13.2 cm
• weight: 2.4 kg

Compression Fitting Reducer 25x20 for PE pipes.

Maximum working pressure 12,5 bar.

Siphon Valve is a simple yet effective drainage valve with a siphon. It allows a tray to drain automatically to a selected level by adjusting the lift tube (“riser”). Suitable for automated mobile systems, it can provide continuous drainage if the riser is fully removed.

Detailed features

• Level adjustment: Three preset water retention and drainage levels, set by moving the riser tube.
• Continuous drainage: If the riser is fully removed, the valve drains the tray completely.
• Full tray: With the riser in its highest position, water is retained in the tray.
• Drainage: Depending on the hole diameter — standard without a reduction ring: 17.5 mm internal diameter provides a maximum drainage rate of 9 l/min. Other sizes are available on request.
• Rubber gasket: Includes a standard 10 mm rubber gasket, compatible with standard sump filters. An optional 5 mm gasket is also available. The gasket height affects the operating water level in combination with the riser settings.
• Installation: It is possible to use 1 to 3 Siphon Valves in already constructed sump filters. The filters allow easy removal of the lid and installation of the valve.
• Construction: Very robust and resistant to demanding growing conditions. Easy to disassemble for regular cleaning.

Recommendations for use

• Adjust the riser pipe to the desired filling and drainage threshold (3 levels or continuous drainage).
• Use the standard 10 mm rubber gasket for optimum performance with standard sump filters. If you require a different retention level, look for the version with a 5 mm gasket.
• Install 1–3 valves according to your needs and the available space in the filters — they are easy to fit and remove.
• Regular cleaning is simplified thanks to the robust, detachable design.

Benefits

The Siphon Valve provides reliable, automatic draining of trays to a preset level through a siphon effect. The standard 10 mm rubber gasket ensures easy integration with sump filters, while the design is durable and easy to maintain. The option to use up to three valves in one system provides flexibility and control.

PLANT!T Aeros IV Master System is a highly efficient Deep Water Culture (DWC) hydroponic system, also known as a "bubbler" system. It is specially designed to grow up to four plants in a highly aerated nutrient solution, supporting rapid growth and healthy root development.

Key features:

• Capacity: Up to 4 plants

• Reservoir: Separate main reservoir with solution-level indicator​

• Aeration: Two dual air pumps and submersible air stones in each pot to enrich the solution with oxygen​

• Circulation: High-quality water pump for even distribution of the nutrient solution​

• Monitoring: Easy access for measuring pH and EC through the inspection port​

Advantages:

• Rapid growth: Continuous oxygen enrichment promotes vigorous root and plant growth​

• Easy monitoring: The inspection port enables quick and easy measurement of pH and EC levels​

• Flexibility: Each pot is independent, allowing plants to be moved easily when needed​

• Complete kit: The system includes all components needed to get started, eliminating the need for additional purchases​

Technical specifications:

• Dimensions: Approximately 1000 mm (width) x 1000 mm (depth) x 303 mm (height)​

• Total reservoir capacity: 75 litres

• Working capacity: 60 litres​

• What's included:

  • 1 x main reservoir with level indicator​

  • 4 x pots with lids and net baskets​

  • 2 x dual air pumps​

  • 4 x air stones​

  • 1 x water pump​

  • All necessary tubing and connectors​

Applications:

The PLANT!T aeros IV Master System is ideal for growing a variety of crops in a controlled environment, including vegetables, herbs and flowers. It is suitable for both beginners and experienced growers looking for an efficient hydroponic growing solution.

Hydroponic vertical tower with 5 tiers is a practical system for growing plants without soil. It makes efficient use of space while providing optimal conditions for the development of various types of vegetables, herbs and leafy crops. It is suitable for home use, as well as for greenhouses or small urban gardens.

Construction: vertical system with 5 separate tiers, allowing multiple plants to be grown in a small area.

Hydroponic principle: plants grow without soil, receiving nutrients through a circulating nutrient solution.

Material: made from durable, lightweight materials (plastic), suitable for long-term use in contact with water and nutrient solutions.

Space-saving: the vertical design makes maximum use of limited space, making it suitable for balconies, terraces, greenhouses and indoor spaces.

Suitable crops: ideal for lettuces, herbs, spinach, rocket, strawberries and other compact plants.

Modular design: the levels are arranged to ensure good water circulation and even distribution of the nutrient solution.

The set includes: 1× sponge for germinating your seeds; 1× seed tray; 1× timer; 1× plug-in dimmable adapter; 1× water pump matched to the system's flow rate; 1× top cap; 1× top section that distributes the nutrient solution; 5× tier sections, each with 4 outlets for net pots; 1× cover for the main body; 1× nutrient-solution reservoir; 4× short bolts with nuts; 2× long bolts; 20× hydroponic net pots.