LUMii

LUMii BLACK 600W HPS Lamp is a dual-spectrum sodium / HPS bulb / lamp, suitable for both growth / vegetative growth and the flowering phase.

• for growth and flowering
• power: 600W
• luminous flux: 88 000 lm
• efficiency: 147 lm/W
• colour temperature: 2000 K
• service life: 20 000 h
• socket: E40

Note: to ignite the lamp, it is necessary to connect it to a ballast and ignitor or an electronic ballast, which are sold separately (they can be purchased here*).

Recommendations:

• Connect to the mains using a suitable ballast.
• Place at least 50 cm from the tops of the plants!
• Recommended ambient temperature: 25°C
• To make full use of the maximum efficiency of sodium lamps, it is recommended that they be used for no more than one year.

Warning:

• Risk of electric shock - disconnect the power supply before installing, removing or checking the lamp, and protect it from contact with water!
• Do not stare at the light source!
• Fire hazard - keep flammable materials away from the lamp!
• Use only in combination with suitable thermally protected control gear and a suitable device!
• Damaged lamps may emit dangerous radiation and may cause injury, poisoning, property damage or fire!
• Damaged lamps must be replaced immediately with increased caution and disposed of in accordance with local environmental legislation!
• Risk of burns - allow the lamp to cool down first!
• Do not use excessive force when installing a lamp!
• The lamps must be switched off and allowed to cool down at least once a week!
• At the end of the lamp's life - indicated by intermittent switching on and off or significant changes in colour or brightness - the lamp must be replaced immediately!

LUMii Digita 600W Electronic Ballast is an electronic/digital ballast with the ability to dim (reduce or increase power) 600W high-pressure sodium (HPS) or metal-halide (MH) lamps. LUMii Digita 600W Electronic Ballast is an electronic ballast with an integrated microprocessor that controls and operates at a higher frequency than standard analogue ballasts. Higher efficiency means more light for your plants. It enables rapid lamp ignition, saving energy. Quieter than any other ballast. Measurements show up to 30% more brightness than analogue ballasts. The electronic ballast solves irregular mains voltage issues. Analogue ballasts age, become noisy, consume more electricity and get hotter while light output drops. Electronic ballasts do not do this; they maintain the same output and efficiency. For safe operation, the LUMii ballast is programmed to switch off in the event of a short circuit, lamp failure or no lamp fitted.

 

​

• operating modes with a 600W lamp: 250W, 400W, 600W
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W
• Supply voltage: 220–240V 50Hz
• Current: 1.8A
• Input power: 620W
• Output power: 600W
• Power factor: >0.99 THD
• Non-linear distortion: <10%, Imax:Iavg. <1,7
• Ambient temperature: from -25°C to 70°C
• Heating (Δt): 29°C
• Protection class: >IP23
• ​Dimensions L/W/H: 43/38/18.5 cm
• Weight: 3.125 kg

 

Disconnect the power when changing the lamp!

Compact fluorescent lamp (CFL) for flowering, with an integrated electronic ballast (connects directly to the mains with an E40 socket). It does not develop high heat - it can be placed very close to the plants.

 

• Socket: E40
• Luminous flux: 6300 Lm
• Luminous efficacy: 48 Lm/W
• Lifetime: 10 000 hours
• Colour temperature: 2700 K
• Suitable for supplementary lighting, side lighting, mother plants and clones
• Minimal heat emission

• Do not touch the glass part of the lamp with your hands!
• Do not overtighten in the socket!
• Ensure suitable ventilation!
• Do not use the lamp if it is wet!
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

The LUMii BLACK Reflector includes:

 

•  5m cable 
•  E40 lamp holder

 

Dimensions:

 

• Height: 130mm 
• Width: 380mm
• Length: 510mm

LUMii BLACK 600W Electronic Ballast is an electronic/digital ballast with "dimming" capability (reducing or increasing power) for 600W high-pressure sodium (HPS) or metal-halide (MH) lamps/bulbs.

 

• 4 operating modes: 250W, 400W, 600W, 600W boost (+10%)
• aluminium housing suitable for wall mounting.
• cable with Schuko plug for connection to the mains
• IEC connector (computer type) for connecting the lamp
• Voltage: 240V
• Current: 2.9A
• Power cable: 2m
• Dimensions L/W/H: 29/12/6cm
• Weight: 3kg
• Warranty: 1 year

 

The electrical fuse is located beneath the power socket — please check the fuse if the ballast is not working!

 

• operating modes with a 600W lamp/bulb: 250W, 400W, 600W, 600W boost (+10%)!
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W

 

Disconnect the power when changing the lamp!

Compact fluorescent lamp (CFL) for flowering, with an integrated electronic ballast (connects directly to the mains with an E40 socket). It does not develop high heat - it can be placed very close to the plants.

 

• Socket: E40
• Luminous flux: 8050 Lm
• Luminous efficacy: 40 Lm/W
• Lifetime: 10 000 hours
• Colour temperature: 2700 K
• Suitable for supplementary lighting, side lighting, mother plants and clones
• Minimal heat emission

• Do not touch the glass part of the lamp with your hands!
• Do not overtighten in the socket!
• Ensure suitable ventilation!
• Do not use the lamp if it is wet!
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

LUMii Green LED Head Torch is a head torch with green light, ideal for checking your garden without interrupting the photoperiod (the plants’ dark period).

 

• Three operating modes – full, partial and strobe (flashing light)
• 6 green LEDs
• Operates on 3 AAA batteries (not included)
• Compact and lightweight design

LUMii Black 600W Set  is an indoor lighting set that includes:

 

• bulb / lamp: dual-spectrum LUMii BLACK 600W , 1 pc.
• ballast: digital LUMii BLACK 600W , 1 pc.
• reflector: open Stucco , 1 pc.

 

Attention: the kit does not include a cable from the ballast to the reflector!

LUMii protective glasses for observing under HPS lighting. In addition to protecting your eyes, they make it easier to identify early signs of nutrient deficiencies or pest infestation without having to switch off the lights. LUMii protective glasses have a specially developed blue lens that corrects the orange tint of sodium lamps and creates the impression of natural daylight. This allows you to observe the true colours of your plants—leaves, fruits and flowers.

 

• protect the eyes from ultraviolet (UV) and infrared (IR) rays
• normalise the spectrum

LUMii Black 600W kit, Maxibright Warpdrive and Stucco for indoor growing. The kit includes:

 

• lamp / bulb: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open embossed Stucco 1 pc.

 

Attention: the kit does not include a cable from the ballast to the reflector!

• Socket: E40
• Luminous flux: 12 950 Lm
• Efficiency: 43 Lm/W
• Lifetime: 10 000 hours
• Colour temperature: 2700 K
• Suitable for supplementary lighting, side lighting, mother plants and clones
• Minimal heat emission

Compact fluorescent lamp (CFL) for young plants, with an integrated electronic ballast (connects directly to the mains using an E40 socket). It does not develop a high temperature and can be positioned very close to plants.

• Do not touch the glass part of the lamp with your hands!
• Do not overtighten in the socket!
• Ensure suitable ventilation!
• Do not use the lamp if it is wet!
• Do not use in dimmable light fixtures!
• Do not use in enclosed light fixtures!

LUMii AeroTube 125 mm is the latest air-cooled reflector. When used together with ducting and a fan, this innovative product allows air to flow through the reflector, helping to control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Supplied with a 4 m IEC cable
• Recommended wattage: up to 400W
• ∅ 125 mm.

Economy LUMii Black 600W, Hortilight and Stucco set for indoor growing. The set includes:

 

• bulb / lamp: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: magnetic Hortilight 600W 1 pc.
• reflector: open textured Stucco 1 pc.

 

Warning: the set does not include cables or a plug!

LUMii Solar Pro 315W + 5m cable indoor growing lighting kit. The set consists of:

 

• LUMii SOLAR 315 W CDM Ballast 1 pc.
• LUMii SOLAR 315W Reflector – Wide Angle Version 1 pc.
• 5 m cable (connecting the ballast and reflector)

 

Note: the set does not include a bulb!

LUMII Cord Set with a 4 m cable is a high-quality, versatile power set designed for convenient and safe connection of your lighting systems. This set includes a standard E40 lampholder and a 4-metre power cable, providing ample length for maximum installation flexibility. The E40 lampholder is compatible with many lamp types, including sodium and metal-halide lamps, making it versatile for different applications. LUMII Cord Set is made from high-quality materials that ensure years of use and exceptional reliability. The cable has wear- and heat-resistant insulation that protects the conductors and ensures safe operation. Installation is quick and easy thanks to the integrated metal bracket for securing the cable to the reflector. Whether you are a beginner gardener or a professional grower, this set helps you install and power your lighting systems with ease and confidence. Overall, the LUMII Cord Set with a 4 m cable is an indispensable part of any lighting system, offering quality, reliability and convenience you can rely on.

LUMii SOLAR 315W CMH FIXTURE lighting kit, which includes:

 

• Electronic ballast + reflector

LUMii Digita 1000W Electronic Ballast is an electronic/digital ballast with dimming capability (reducing or increasing power) for 1000W high-pressure sodium (HPS) or metal-halide (MH) lamps. LUMii Digita 1000W Electronic Ballast is an electronic ballast with a built-in microprocessor that controls and operates at a higher frequency than standard analogue ballasts. Higher efficiency means more light for your plants. It enables rapid lamp ignition, saving energy. Quieter than any other ballast. Measurements indicate up to 30% more brightness than analogue ballasts. The electronic ballast solves the problem of irregular mains voltage. Analogue ballasts age over time, become noisy, consume more electricity and heat up more while their light output decreases. This does not happen with electronic ballasts: they maintain the same emission level and efficiency. For safe operation, the LUMii ballast is programmed to switch off in case of a short circuit, lamp failure or a missing lamp.

 

​

• Operating modes with a 1000W lamp: 250W, 400W, 600W, 1000W
• Operating modes with a 600W lamp: 250W, 400W, 600W, do not dim above 600W!
• operating modes with a 400W lamp/bulb: 250W, 400W, do not "dim" above 400W!
• operating modes with a 250W lamp/bulb: 250W, do not "dim" above 250W
• Supply voltage: 220–240V 50Hz
• Current: 4.6A
• ​Dimensions L/W/H: 48/39.5/24.5 cm
• Weight: 5.2 kg
• Warranty: 1 year

 

Disconnect the power when changing the lamp!

LUMii Black 600W and Maxibright Warpdrive set for indoor growing. The set includes:

 

• bulb / lamp: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open LUMii Black 1 pc.

 

LUMii Black 600W, Maxibright Warpdrive and PEARLPRO XL kit for indoor growing. The kit includes:

 

• lamp / bulb: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open PEARLPRO XL 1pc.

Attention: the kit does not include a cable from the ballast to the reflector!

LUMii AeroTube 150mm. is the latest air-cooled reflector. When used together with ducting and a fan, this innovative product allows air to flow through the reflector, helping to control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Includes a 4m IEC cable
• Recommended power: up to 600W
• ∅ 150mm.

LUMii AeroTube 200mm. is the latest air-cooled reflector. When used with ducting and a fan, this innovative product allows air to flow through the reflector, helping control the ambient temperature.

 

• Controls temperature
• Tempered glass
• Removable lamp holder for easy access and lamp cleaning
• External double-sided reflector for superior light output and distribution
• Includes a 4m IEC cable
• Recommended wattage: up to 1000W
• ∅ 200mm.

LUMii SOLAR PRO 315W CDM Lamp is a latest-generation ceramic discharge metal-halide (CDM), or ceramic metal-halide (CMH), lamp. This technology offers an enhanced light spectrum, as close as possible to natural sunlight and up to 20% greater efficiency than high-intensity discharge (HID) lamps. LUMii SOLAR PRO 315W emits light with a colour temperature of 3200K and is ideal for use throughout all stages of plant development – from germination and seedlings to cloning or vegetative growth, right through to the end of flowering.

 

• for all stages of plant development
• power: 315W
• light output: 37 800lm
• colour temperature: 3200K
• lifespan: 20 000h
• lamp base: PGZ18
• starting: connects to a special adapter* and ballast* (sold separately)

 

Warning:

• The cable connecting the ballast to the reflector must be no longer than 2m!

LUMii Black 600W, Maxibright Warpdrive and Azerwing kit for indoor growing. The kit includes:

 

• lamp / bulb: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: electronic Maxibright Warpdrive 1 pc.
• reflector: open Azerwing 1 pc.

 

Attention: the kit does not include a cable from the ballast to the reflector!

?LUMii XLED Controller – EU Plug is a high-quality controller designed to manage LED lighting with a 0-10V signal. It enables precise adjustment of the photoperiod and light intensity, as well as sunrise and sunset simulation, providing optimal conditions for plant growth.

? Detailed specifications:

Manufacturer: LUMii

Model: XLED Controller – EU Plug

Signal type: 0 – 10 V

Number of channels: 1

Maximum number of connected devices: 25 LUMii XLEDv6 680W LED fixtures

Output voltage: 0 – 10 V ± 0.1 V

Adapter input voltage: 120 – 240 V AC

Controller input voltage: 12 V DC, 1.0 A

Operating temperature: 0°C – 35°C

Operating humidity: up to 80% RH, non-condensing

Protection rating: IP20

Mounting: Suitable for wall mounting or suspension

Included accessories: EU plug adapter

 

 

? Recommendations and instructions for use:

Connect the controller to the power supply using the supplied adapter.

Use an RJ12 cable or connect directly to the push-in terminals to connect the LED lights.

Set the desired photoperiod, light intensity, sunrise and sunset simulation parameters via the 5-button interface.

The controller will manage the connected devices, ensuring optimal conditions for plant growth.

 

✅ Benefits of use:

Precise control: Allows adjustment of the photoperiod, light intensity, and sunrise and sunset simulation.

Multiple devices: Can control up to 25 connected LED lights.

Ease of use: Intuitive 5-button interface for easy configuration.

Flexibility: Compatible with any LED light that accepts a 0-10V signal.

Osram 600W, LUMii Digita and PEARLPRO XL kit for indoor growing. The kit includes:

 

• bulb / lamp: dual-spectrum Osram Plantastar 600W 1 pc.
• ballast: electronic LUMii Digita 600W 1 pc.
• reflector: open PEARLPRO XL 1 pc.

 

Attention: the kit does not include a cable from the ballast to the reflector!

LUMii Black 600W, Hortilight and MAXLIGHT indoor growing kit. The kit includes:

 

• bulb / lamp: dual-spectrum LUMii BLACK 600W 1 pc.
• ballast: magnetic Hortilight 600W 1 pc.
• reflector: enclosed Garden Highpro MAXLIGHT 1 pc.
  

Attention: the kit does not include cables or a plug!

Set for flowering Philips 600W, LUMii Black and Azerwing for indoor growing.

 

• bulb / lamp for flowering: Philips MASTER GreenPower CG T 600W 1 pc.
• ballast: electronic LUMii BLACK 600W 1 pc.
• reflector: open Azerwing 1 pc.

 

Warning:

1. This set is for the flowering stage of indoor-grown plants!
2. The set does not include a cable from the ballast to the reflector!